Resurfacing and Strengthening of Palla Dharamkhetar Road (VR) Km. 0/000 to 1/000 Ta.:- Ghoghamba Dist.:- Panchmahal

Name Of Work :- Resurfacing and Strengthening of Palla Dharamkhetar Road (VR) Km. 0/000 to 1/000 Ta.:-

Ghoghamba Dist.:- Panchmahal

Taluka :Ghoghamba, District : Panchmahal

1 Resurfacing and Strengthening of Palla Dharamkhetar Road (VR) Km. 0/000 to 1/000 Ta.:- Ghoghamba Dist.:- Panchmahal

Bill of Quantities

Item of work Quantities Rate in Amount

Estimated Unit Figures in

1 Clearing and grubbing of road length including up rooting wild vegetation, grass, 0.47 Hectar 28393.04

bush shurbs, saplings and trees of girth up to 300 mm removal of stumps, of such e

trees cut earlier and disposal of unserviceable material and stacking of serviceable

material (area of light density) by mechanical means in area of light jungle

2 Scarifying & removing bitumen macadam surface including Completely 154.00 Sq.mt 39.63

removing out the entire existing bituminous surface, stacking useful materials on

road side and disposing off remaining stuff. complete. as per instruction in Charge

3 Providing, laying and Spreading Granular sub-base (Grade-I) by providing close 432.00 Cum 1348.35

graded MCBT. material in single layer with motor graderon prepared surface,

mixing by mix in place method with rotovator at OMC and compacted

withvibratory roller 80 to 110 KN static weight to achieve desire density etc

4 Providing and laying compacted WBM of Grading-I MCBT metal of size 63 mm 119.00 Cum 1730.13

to 45 mm in required layers including using 16% stone screening 13.2 mm size

and 8% stone dust as filler including spreading watering & consolidation by

vibratory roller etc. as per MoRTH Specification compelete as directed by

Engineer - in - Charge.

5 Providing and laying compacted WBM of Grading-II MCBT metal of size 53 to 352.00 Cum 1822.04

22.4 mm in required layers including using 24% stone screening 11.2 mm size

and 8% stone dust as filler including spreading watering & consolidation by

vibratory roller etc. as per MoRTH Specification compelete as directed by

Engineer - in - Charge.

6 Providing and laying 100 mm Compacted of Specified quarry Spall in side 207.00 Cum 1056.46

shoulder including carraige of material and spreading on prepared base including

compacting as per MOST Specification etc... complete.

7 Earthwork in cutting in all sorts of soil and soft murrum including conveying and 261.00 Cum 127.75

putting the stuff in spoil bank maintaining minimum distance of five meter

between top edge and cutting and toe of spoil bank.

8 Earthwork for embankment including breaking clods, dressing with all lead and 2877.00 Cum 158.62

lift and including watering rolling and consolidation of subgrade in layers at

O.M.C. to required dry density including filling the depression which occur

during the process using power roller 8T to 10T.(E) From Borrow area within all

9 Rolling & watering of earthwork in layers with power roller including filling in 661.00 Cum 22.49

depressions which occur during the process.

10 Providing and laying Prime coat with Bitumen emulsion (SS-1) at the rate of 7.50 3483.00 Sq.mt 62.93

Kg / 10 Sq.M. on the prepare bituminous surface etc complete as directed with

all labour and materials

11 Providing and laying Tack coat with Bitumen emulsion (RS-1) at the rate of 2.50 8637.00 Sq.mt 13.44

Kg / 10 Sq.M. on the prepare bituminous surface etc complete as directed with

all labour and materials

01.Sch B Resurface Palla Dharamkhetar Ghoghamba Page

Item of work Quantities Rate in Amount

Estimated Unit Figures in

12 Providing & laying Bituminous grout 37.50 mm thick with asphalt of grade of 328.00 MT. 2482.58

VG-30 at the rate of1.99% by weight of mix for mixing using B.T.Chips of

required gradation including cleaning and heating asphalt premix materials by hot

mix process in proper gradation and laying with paver finisher and consolidation

by roller of 8 to 10 tonnes including cost of all materials, Asphalt,aggregates,

labour Charges,royalty charges etc.completed as directed. including flushing key

aggregate @0.13 Cum/10 Sq.m.

13 Providing laying and rolling 25 mm thick open graded premixed bitumineous 249.00 MT. 2896.68

carpet with B.T. aggregate as specified and using bitumen grade VG-30 for

mixing with agreegate at the rate of 3.36 % i.e 33.60 kg/M.T. of total mix

including heating and mixing in drum mix plant and spreading the same with

paver finisher and consolidation with power roller including necessary firewood,

oil, lubricants, labour charges etc. using contractor's own drum mix plant and

equipment, tool etc. completed in accordance with the requirement of

14 Providing & laying Bitumen seal coat with 0.18 Cmt/ 10 Smt. of stone chips 129.00 M.T 3375.42

6mm size & binder grade VG-30 content at the rate of 4.50 % by total weight of

mix . Hot mix laying process is including heating the asphalt aggregate

continuous batching, transporting the mix and spreading the same by paver

finisher & consolidation with power roller including providing necessary fire

wood, oil, lubricant, labour charges, higher charges of machinery etc, complete.

15 Providing and fixing ordinary Kilometer stone of precast C.C. 1:2:4 including 2.00 Nos. 704.34

necessary reinforcement as per I.R.C. type design in C.C. 1:4:8 including

painting,lettering etc. complete (For O.D.R road V.R.)

16 Providing and fixing hectometer as per I.R.C. type design including painting, 4.00 Nos. 356.50

lettering etc. complete. (I)Fixing in C.C. 1:5:10

17 Providing and fixing guard stone as per I.R.C., type design including white 40.00 Nos. 349.11

washing etc. complete. (I)Fixing in 1:5:

18 Citizen' s information Board- Providing and fixing of typical information board 1.00 Nos. 22562.39

as per instruction. Two MS plates of 1.6 mm thick, of 900 mm x 750mm size

fixed at top & bottom duly welded with MS angles of 25 x 25 x 5 mm thick M.S

plate shall be welded by two vertical M.S flats & four horizontal M.S flates 5 mm

thick to 75 mm x 75 mm of 12 SWG square tubes posts duly embedded in cement

concrete M-15 grade blocks of 600mm x 600mm x 750 mm, below ground level.

Painting New letters & figure of any shade with ready mixed synthetic enample

paint of superior quality in required shade and colour, All sections of framed

posts and steel tube will be painted with primer and two coats of epoxy paints as

per detailed drawing

19 Supply & fixing logo board of Vanbandhu Kalyan Yojana diamond size (600 X 1.00 Nos. 4096.56

600mm) 16 gauge & board plate size (900x 250mm) 16 gauge thick M. S plate

and 2.40 meter deep length single angle 75x 75x 6 mm size including fitting and

painting lettering with luminous colour as per drawing etc

20 Providing and fixing Junction board of M.S. plates and angles as per standard 2.00 Nos. 5236.70

I.R.C. design including fixing in C.C. 1:4:8 with necessary excavation painting

figuring and lettering on board etc. complete as per detailed drawing

01.Sch B Resurface Palla Dharamkhetar Ghoghamba Page

Item of work Quantities Rate in Amount

Estimated Unit Figures in

21 Road marking with hot applied thermoplastic paints with reflectorising glass 235.13 Sq.mt 367.73

beads on bitumin surface providing and laying a hot applied thermoplastic

compound 2.5 mm thick including reflectorising glass beads @ 250gms per sqm

area, thickness of 2.5mm is excluding of surface applied glass beads as per

IRC:35-2015. The finished surface to be level, uniform and free from streaks and

holes. zebra patta /bump patta lane/center line/ edge line/cut patta. The white

colour marking should provide liminance coefficinet on cement road shalll be min

130 mcd/m2/lux and Asphalt road shall be min 100 mcd/m2/lux during the

service life during the day time. The marking should meet the performance

criteria for night time reflectivity, wet reflectivity and skid resistance as

mentioned in the section-15 of IRC 35-2015. Warranty for the Retro reflectivity

should be two years.

22 STOP SIGN:-Providing and fixing sing boards made out of 2mm aluminium 1.00 Nos. 4676.06

sheet; size 90 x 90cms. rectangle as per the design of IRC-67-1977 pre treated

with phospheting process & acid teching; coated with one coat of epoxy primer

and two coats of best quality epoxy paint; reflectorised with retro refiective

sheeting as per latest M.O.S.T. Specifications; 3.1m long stand post and frame

fabricated from suitable size iron angle of 35 x 35 x 3mm 75x75x6mm as

required; painted with best quality epoxy coatings in black and white bends. the

details of symbol for each board shall be as per the instruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60cms. for

each leg. including excavation curing tec. complete under the supervision of

engineer in charge.(A) Engineer Grade(VR)...

23 Regulatory/Mandatory signs :Providing and fixing sing boards made out of 2mm 22.00 Nos. 3439.81

aluminium sheet; size 60cms. diameter circle as per the design of IRC-67-1977

pre treated with phospheting process & acid eteching; coated with one coat of

epoxy primer and two coats of best quality epoxy paint; reflectorised with retro

refiective sheeting as per latest M.O.S.T. Specifications; 3.1m long stand post and

frame fabricated from suitable size iron angle of 35 x 35 x 3mm 75x75x6mm as

required; painted with best quality epoxy coatings in black and white bends. the

details of symbol for each board shall be as per the instruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60cms. for

each leg. including excavation curing etc. complete under the supervision of

engineer in charge.(A) Engineer Grade(VR)...

24 Chevron sign :-Providing and fixing sign boards made out of 1.5mm aluminium 36.00 Nos. 3711.75

sheet / 3mm ACP (Aluminum composite Panel); size 60x50cm rectangular as per

design of IRC-67-2012. Pre treated with phospheting process & acid etching;

coated with one coat of epoxy primer and two coats of best quality epoxy paint ;

reflectorised with High Intensity Prismatic Grade retro refiectivesheeting of Type-

4 as per ASTM D-4956 and latest M.O.S.T.Specifications; 3.3 mtr long stand

post of Iron Angle 75 x 75 x 6mm / 65NB Circular MS Pipe as required and

frame fabricated from suitable size iron angle of35x35x3mm; painted with

bestquality epoxy coatings in black and white bends. the details of symbol or

inscription / numerals for each board shall be as per the instruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for

each leg including excavation, curing etc.complete under the supervision of

engineer in charge. A warranty for 7 years for the Retro reflective sheeting from

original manufacturer & a certified copy of 3 year outdoor exposure test report

from third party test lab for the product offered shall be submitted by contractor.

(A) Class-B Type-4 Retro Reflective sheeting

01.Sch B Resurface Palla Dharamkhetar Ghoghamba Page

Item of work Quantities Rate in Amount

Estimated Unit Figures in

25 Around the Island/road direction sign board (Big) :-Providing & Fixing sign 4.00 Nos. 6798.92

boards made out of 2mm aluminium sheet, size 180 x 60 cms rectanglel as per

the attached drawing pre treated with phospheting process & acid etching. coated

with one coat of epoxy priemr and two coats of best quality epoxy paint

reflectorised with retro reflective sheeting as per latest M.O.S.T. 3.1m long

(2nos) stand post and frame fabricated from iron angle of 50x50x5mm, painted

with best quality epoxy coating the fixing at site shall be in 1:2:4 CC block of

size 45 x 45x 60cms for each leg, including excavation curing etc. complete under

the supervision of engineer in charge.(A) Engineer Grade(VR)...

26 Men at work (Heavy) sign :-Providing and fixing sing boards made out of 2mm 4.00 Nos. 6141.20

aluminium sheet; size 120 x 90cms. rectangle as as per the attached drawing. pre

treated with phospheting process & acid etching; coated with one coat of epoxy

primer and two coats of best quality epoxy paint; reflectorised with retro

refiective sheeting as per latest M.O.S.T. Specifications; Letters and numerals

should be as per IRC-30-1968, 3.1m long (2 nos) stand post and frame fabricated

from suitable size iron angle of 50 x 50 x 5mm painted with best quality epoxy

coatings in black and white bends. the details of symbol or inscription / numerals

for each board shall be as per the instruction of engineer in charge. The fixing at

site shall be in 1:2:4 CC block of size 45 x 45 x 60cms. for each leg. including

excavation curing etc. complete under the supervision of engineer in charge.(A)

Engineer Grade(VR)...

27 Danger Plate Sign :-Providing & fixing sign board made out of 2mm aluminium 4.00 Nos. 456.55

sheet, size 30cms diameter circle, pretreated with phospheting process and acid

etching, painted with one coat of epoxy primer and two coats of best quality

epoxy paint reflectorised with retro reflective sheeting as per latest M.O.S.T.

specifications (As per attached draiwng)(A) Engineer Grade(VR)...

28 Diversion sing board :-Providing & Fixing sign boards made out of 2mm 4.00 Nos. 6798.92

aluminium sheet, size 180 x 60 cms. rectangle as per the attached drawing pre

treated with phospheting process & acid etching. coated with one coat of epoxy

priemr and two coats of best quality epoxy paint reflectorised with retro reflective

sheeting as per latest M.O.S.T. Specifications; Letters and numerals should be as

per IRC-30-1968,3.1m long (2nos) stand post and frame fabricated from iron

angle of 35x35x3mm, 50x50x5mm painted with best quality epoxy coatings in

blak and white bends. The fixing at site shall be in 1:2:4 CC block of size 45 x

45x 60cms for each leg, including excavation curing etc. complete under the

supervision of engineer in charge.(A) Engineer Grade(VR)...

01.Sch B Resurface Palla Dharamkhetar Ghoghamba Page

Item of work Quantities Rate in Amount

Estimated Unit Figures in

29 Flexible Median Marker : Providing and Fixing of Flexible Median Marker that 37.00 Nos. 271.69

are made of tough, high impact resistant, injection-moulded, thermoplastic body

with property of flexibility to provide high durability. The dimension of Flexible

Median Marker should not exceed 18.4 cm in height(including shank height),12.5

Cm in width. ,0.65 cm in thickness and shank depth shall be 3.4 cm The body

structure shall be rounded at all its corners and edges. The plastic used for

molding the Flexible Median Marker should survive impact load of 5kg

continuously for 750 times at room temperature. The logo of the manufacturer

shall be embossed on either side of the body in the injection molding process. The

Median Marker shall have flame like shaped body with, fluorescent yellow color

retro-reflective sheeting of size not less than 90 Cm square, with fully reflective

micro prismatic cube corners as its retro-reflective elements as per IRC 67

and ASTM D4956-09 type XI specifications reflectivity values. The retro-

reflective sheeting shall be one or both sides of the Flexible Median Marker and

shall be edge protected with no exposed edges which will prevent edge lifting,

vandalism, sheeting damage, etc. The Flexible Median Marker shall be fixed by a

combination of epoxy adhesive and grouting as recommended by manufacturer

and Engineer in charge.

30 Village name/ Bump Ahed sign :-Providing and fixing sing boards made out of 1.00 Nos. 5045.37

2mm aluminium sheet; size 90 x 60cms. rectangle as as per the design of IRC-67-

1977 pre treated with phospheting process & acid etching; coated with one coat

of epoxy primer and two coats of best quality epoxy paint; reflectorised with retro

refiective sheeting as per latest M.O.S.T. Specifications; Letters and numerals

should be as per IRC-30-1968, 3.1m long (2 nos) stand post and frame fabricated

from suitable size iron angle of 50 x 50 x 5mm painted with best quality epoxy

coatings in black and white bends. the details of symbol or inscription / numerals

for each board shall be as per the instruction of engineer in charge. The fixing at

site shall be in 1:2:4 CC block of size 45 x 45 x 60cms. for each leg. including

excavation curing etc. complete under the supervision of engineer in charge.(A)

Engineer Grade(VR)...

31 Hazard Marker Sign :-Providing and fixing sing boards made out of 2mm 8.00 Nos. 2423.74

aluminium sheet; size 90 x 30cms. rectangle as as per the design/drawing

attached (IRC) pretreated with phospheting process & acid etching; coated with

one coat of epoxy primer and two coats of best quality epoxy paint; reflectorised

with retro refiective sheeting as per latest M.O.S.T. Specifications; 3.1m long

stand post and frame fabricated from suitable size iron angle of 35 x 35 x 3mm &

50 x 50 x 5mm painted with best quality epoxy coatings The fixing at site shall

be in 1:2:4 CC block of size 45x45x 60cms. for each leg. including

excavation curing etc. complete under the supervision of engineer in charge.(A)

Engineer Grade(VR)...

32 Cautionary Warning Sign :-Providing and fixing sing boards made out of 2mm 24.00 Nos. 3722.36

aluminium sheet; size 90 x 90 x 90 cms. equilateral triangle as per design of IRC-

67-1977. Pre treated with phospheting process & acid etching; coated with one

coat of epoxy primer and two coats of best quality epoxy paint ;reflectorised with

retro refiectivesheeting as per latest M.O.S.T.Specifications; 3.1m long stand

postand frame fabricated from suitable sizeiron angle of 35 x 35 x 3mm, 75 x

x 6mm as required; painted with bestquality epoxy coatings in black andwhite

bends. The details of symbol foreach board shall be as per theinstruction of

engineer in charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x

60 Cms. for each leg.including excavation, curing etc.complete under the

supervision of engineer in charge.(A) Engineer Grade(VR)

01.Sch B Resurface Palla Dharamkhetar Ghoghamba Page

Item of work Quantities Rate in Amount

Estimated Unit Figures in

33 Cat Eye / Road Stud / RPM: Supplying of Raised Pavement Markers made of 119.00 Nos. 217.41

polycarbonate and ABS moulded body and reflective panels with Micro prismatic

lens (No Glass bead lens) capable of providing total internal reflection of the light

entering the lens face and shall support a load of 13635 kgs. tested in accordance

to ASTM D 4280 Type H and complying to Specifications of Category A of

MORTH Circular No RW/NH/33023/10-97 - DO III Dt 11.06. 1997. The height,

width and length shall not exceed 20 mm, 130 mm and 130 mm and with

minimum reflective area of 13 Sqcm on each side and the slope to the base shall

be 35 +/- 5 degree. The body of the marker should having finger grip for easy

and accurate placement and application with epoxy / bituminous Adhesive as

recommended by the manufacturer of the marker. The colour of the marker

should be as per the IRC 35-2015 and as directed by Engineer-in-charge.

34 Type - A :- Providing and erecting a "W" metal beam crash barrier comprising of 100.00 Rmt 3354.21

3 mm thick corrugated sheet metal beam rail, 70 cm above road / ground level,

fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 mt. centre

to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments

to be galvanised by hot dip process, all fittings to conform to IS:1367 and

IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel

section 150 x 75 x 5 mm, 330 mm long complete as per clause

35 Road hump for maintaining and reducing speed and prepare Premix Carpet layer 2.00 No. 8755.69

accordance with IRC -35-2015 and IRC -99-2018 or as per dirtected by engineer

in incharge.(Including Thermoplast Marking)

36 Excavation for foundation upto 1.5M. depth including sorting out and stacking of 45.00 Cum 241.80

useful materials and disposing of the excavated stuff upto 50 meter lead.(B)

Dense or Hard soil.

37 Excavation for foundation in hard murrum and boulders and very stiff or sticky, 3005.00 Cum 582.22

clays and other similar strata including shoring and strutting and dewatering as

necessary and disposing of the excavated stuff as directed .

38 Providing and filling in foundation with ordinary Cement concrete M-100 mix 55.00 Cum 3212.00

and providing necessary vertical pin headers including formwork, vibrating,

ramming and curing complete.

39 Providing and casting in situ ordinary cement concrete M-150 mix and 1208.00 Cum 3785.48

providing necessary pin headers including shuttering, scaffolding, laying,

vibrating, curing and finishing complete without V-Groves. (A) Height from

40 Providing and filling in foundation with ordinary Cement concrete M‐150 mix 319.00 Cum 3582.47

and providing necessary vertical pin headers including formwork, vibrating,

ramming and curing complete.

41 Providing and casting in situ Ordinary cement concrete M-150 for R.C.C. Raft 257.00 Cum 3586.18

and cut-off walls including necessary shuttering laying, vibrating, ramming and

curing complete.

42 Supplying and fixing reinforced concrete heavy duty non-pressure pipes with 70.00 Meter 4685.19

collars for culverts including setting and joining the pipes in C.M. 1:2 watering

and laying (To level of slops of I.S. 458 / 1971 Class NP4 of following internal

diameter. (iv) 900 mm dia.

43 Providing and laying in position FE 500D TMT bar reinforcement including 146.36 M.T 73217.53

cutting, bending, hooking and tying complete as per detailed drawings for the

following.(A) Piers (B) Abutments (C) R.C.C. Returns

44 Providing and casting in situ Controlled cement concrete M-250 for R.C.C. Raft 434.00 Cum 4493.49

and cut-off walls including necessary shuttering laying, vibrating, ramming and

curing complete.

01.Sch B Resurface Palla Dharamkhetar Ghoghamba Page

Item of work Quantities Rate in Amount

Estimated Unit Figures in

45 Providing and casting in situ Controlled cement concrete M-250 mix and 389.00 Cum 4261.19

providing necessary pin headers including shuttering, scaffolding, laying

vibrating, curing and finishing etc., complete without grooves(Height from 0.0 to

46 Providing and casting in situ controlled cement concrete M-250 for R.C.C. 358.00 Cum 5537.83

solid slab including centering, scaffolding, curing and finishing complete.

47 Providing and Casting in situ controlled cement concrete M-250 for average 75 50.00 Cum 5175.24

mm thick Wearing Coat laid as directed including tempering, Vibrating,

finishing,curing and filling in joints with bituminious complete .

48 Providing parapet of ordinary cement concrete M-250 as per detailed drawings 293.00 Rmt 1145.34

with necessary reainforcement including, shuttering, laying vibrating and

finishing to line and level complete.(ii) Cast in situ.

49 Providing and Casting in situ controlled Cement Concrete M-300 for R.C.C. Raft 190.00 Cum 4652.06

and cutt-off walls including necessary shuttering laying, vibrating, ramming and

curing complete.

50 Providing and casting in situ controlled cement concrete M-300 for R.C.C. return 146.00 Cum 5223.72

as per drawings including centering shuttering, scaffolding where necessary,

laying vibrating, curing and finishing complete.(A) Height from 0.0 to 5.0 M. (1)

Piers (2) Abutment (3) RCC return

51 Providing and casting in situ controlled cement concrete M-300 for R.C.C. return 36.00 Cum 5533.79

as per drawings including centering shuttering, scaffolding where necessary,

laying vibrating, curing and finishing complete.(A) Height from 5.0 to 10.0 M.

(1) Piers (2) Abutment (3) RCC return

52 Providing and Casting in situ controlled Cement Concrete M-200 for R.C.C. Raft 26.00 Cum 4387.30

and cutt-off walls including necessary shuttering laying, vibrating, ramming and

curing complete.

53 Providing and filling sand behind abutment & between returns in layers as 221.00 Cum 445.41

54 Providing and laying weep hole in Aburtments, and returns by using A.C. pipe 651.00 No. 45.82

of 100mm including laying in proper grede and jointing the completed as per

detailed specification.

55 Providing and laying filter Media 600mm thick directed at the back of abutments, 666.00 Sq.mt 1180.34

returns and wing walls as per detailed specifications.

56 Providing PVC 100mm diameter water spouts including necessary iron 40.00 No. 159.37

gratings as per drawings.

57 Providing 12 mm thick pre moulded asphalt filler joints as per drawings. 22.00 Sq.mt 702.13

58 Dismentaling the existing structure including removing and stacking the 280.00 Cum 886.05

dismentelled materials as and where directed. (A) R.C.C. work

Credit For Diversion

Rupees Three Crore Forty Three Lakh(s) Sixty Three Thousand Seven Hundred Sixty Four And Paise

I / We am / are willing to carryout the work at ………..% above/Below percent (………………………. Percent above/Below)

(Should be written in figure and words) of the estimated rates mentioned above. Amount of my / our tender worked out as

Estimated amount put to tender Rs: ……………. Estimated amount put to tender Rs: …………...

Deduct……% below Rs: …………………………. Add……% above Rs: ………………………….…

(Please strike out which ever is not applicable.)

01.Sch B Resurface Palla Dharamkhetar Ghoghamba Page

Item of work Quantities Rate in Amount

Estimated Unit Figures in

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra

payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C

Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement

consumption have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

5 Credit of Dismentalled /Reuse materils amounting of Rs. 507461.68 Must be fully recovered from respective 1st R.A. Bill Of Contractor's.

Quantities rate and wordings of items are as per estimate and calculation in the Sch. - B are airthmatically checked.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me and found

Sr.Divisional Account Officer Dy.Executive Engineer

Panchayat (R & B) Division Panchyat (R & B) Sub Division

Signaturre of contractor Executive Engineer

with seal Panchayat (R & B) Division

01.Sch B Resurface Palla Dharamkhetar Ghoghamba Page