Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.3 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹8.1 L+₹65,308 (8.80%)Rejected-Finance | L2 | Rejected-Finance Second Lowest |
Tender Value
Refer Docs
EMD Value
₹30,000
Closing Date
2 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Major S N Gaikwad
Holta Cantt Palampur
WELCOME MAINT AND CERTAIN REPAIR WORKS TO OFFRS MD ACCN AND SINGLE OFFRS ACCN AT ALHILAL MIL STN
2023_MES_608008_1
GEP-34/2023-24
Open Tender
Civil Works
Item Rate
330 days
Alhilal Mil Stn
As per tender documents
8 documents required · 8 mandatory
₹500
GE Palampur
₹30,000
23 Sept 2023
5 Jul 2023
4 Aug 2023
5 Jul 2023
2 Aug 2023
19 Jul 2023
Amount
M&L preparing old plastered/unplastered surfaces of walls by brooming down or steel wire brushing,scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash complete all as specified and directed.
M&L preparing old plastered/unplastered surfaces of ceiling by brooming down or steel wire brushing,scraping down smoke soot,moulds,moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash complete all as specified and directed.
M&L preparation of old plastered/un-plastered wall surfaces including brooming down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of oil bound distemper oil emulsion of approved tint with sponge rollers, complete all as specified and directed. Note: 25% of material shall be deposited in MES store and every quarter before commencment of work and shall be issued to contractor as per site requirement.
M&L preparation of old plastered or un-plastered surfaces of walls by complete removal of existing treatment by mechanical means of old surfaces of walls two coats of oil bound distemper over and incl 1mm thick wall care putty over plastered surface to prepare the surfaces even and smooth complete all as specified and directed. Note: 25% of material shall be deposited in MES store and every quarter before commencment of work and shall be issued to contractor as per site requirement.
M&L preparation of old plastered/unplastered wall surfaces including brooming down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of cement base paint upto 15m height, complete all as specified and directed. Note: 25% of material shall be deposited in MES store and every quarter before commencement of work and shall be issued to contractor as per site requirement.
M&L prepartion of old painted wooden surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed. Note: 25% of material shall be deposited in MES store and every quarter before commencement of work and shall be issued to contractor as per site requirement.
M&L for preparation of old painted steel surfaces of any description not otherwise described, over 10 cm width or girth and applying one coats of synthetic enamel paint, complete all as specified and directed. Note: 25% of material shall be deposited in MES store and every quarter before commencement of work and shall be issued to contractor as per site requirement.
Taking down cement plaster incl tiles of any description on brick or stone or cement concrete walls etc including raking out joints, hacking for key, scrubbing down with water etc, complete etc all as specified and directed.
M&L for 15mm thick rendering in cement mortar 1:4 on fair faces of brick or concrete surfaces, as on external surface such as chajja, parapet, ceiling finished even and smooth without using extra cement, complete all as specified and directed.
M&L for 15mm thick rendering in cement mortar 1:6 on fair faces of brick or concrete surfaces, as on external surface such as chajja, parapet, ceiling finished even and smooth without using extra cement, complete all as specified and directed.
M&L for 10mm thick rendering in cement mortar 1:3 on fair faces of brick or concrete surfaces, as on external surface such as chajja, parapet, ceiling finished even and smooth without using extra cement, complete all as specified and directed.
Preparing of newly plastered surface and applying two coat cement base paint over a cost of primer on newly plastered surfaces, complete all as specified and directed by Engineer-in-Charge
Preparing of newly plastered surface and applying two coat oil bound distemper over and incl 1m thick wall care putty on newly plastered surfaces, complete all as specified and directed by Engineer-in-Charge
Preparing of new plastered wall surface and applying two coat white wash on newly plastered surfaces, complete all as specified and directed by Engineer-in-Charge
Preparing of new plastered ceiling surface and applying two coat white wash on newly plastered surfaces, complete all as specified and directed by Engineer-in-Charge
S&F taking down chowkats or frames with shutters (without taking off shutters from the frames) n. exc. 1.5 sq.m each and removing from site complete all as specified and directed.
Taking down chowkats or frames but with shutters (with out taking off shutters from the frames) exc 1.5 sq.m but n. exc 4 sq.m each and removing from site, complete all as specified and directed.
Taking down shutter of any description exc 1 sq.m but n. exc 2 sq.m each. complete all as specified and directed.
Refixing shutters of same opening and any discription exc 1.00 Sqm but n.exc. 2.00 Sqm each in same opening complete all as specified and directed.
S&F pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and taring back side of frame,complete all as specified and directed.
S&F pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and taring back side of frame,complete all as specified and directed.
M&L mild steel hold fast & similar articles confirming to Fe-290. and Fe-165, complete all as specified and directed.
M&L plain cement concrete M-15 (Nominal Mix), type B-0 (using 12.5 mm graded crushed stone aggregate) as in filling of steel chowkats or frames, cills and hold fast etc, complete all as specified and directed.
S&F 35mm thick factory made 2nd class hard wood (Sal/Hollock) plain framed, panelled shutter (two panels) with 35mm thick, lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS:1003 (part I) kiln seasoned and chemically pressure treated complete all as specified and directed.
S&F 2nd class hard wood (Sal/Hollock) factory made glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass or gauge etc (with out sash bars) edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing gaure sizes of members of shutters as specified in SSR Part-I Section-8, clause 8.24 (a) for door shutters S&F to chowkats, complete all as specified and directed.
M&L two coats of synthetic enamel paint over one coat of pink primer on wood and wooden based surfaces of any description, not otherwise described, over 10 cm width or girth any surfaces, complete all as specified and directed.
S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, supplying and fixing in opening as per specification & drawing shown in SSR Part-II, completed as per specified & directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat molded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified & directed.
S&F factory made steel window with side hung shutters and glazing bars including box type hinges with steel handle, steel peg stay,complete with glazing bars including applying one shop coat of red oxide primer complete all as specified and directed.
S&F factory made steel window with side hung shutters without glazing bars including Box type hinges with steel handle, steel peg stay, without glazing bars including applying one shop coat of red oxide primer complete all as specified and directed.
S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.
S&F rolled mild steel sections like angle, channel, flat etc as inframed work such as grills, gratings,etc,with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors; ladders ; framed balusters; walk ways; railings; framed work of water tanks and similar work confirming toFe-290Gde E-165 complete all as specified & directed.
M&L preparation of new steel surfaces of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide,zinc chrome primer complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames,metal frames including punching or drilling out old glazing pins/spring clips , or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.
S&F 3 mm thick figured glass, pin head type and glazing with oil putty in squares n.exc. 0.50 sq.m in each pane, complete all as specified and directed.
S&F mild steel cold rolled butt hinges, medium weight,100mm long, complete all as specified and directed.
S&F 150 mm size (length of bolt) aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed
S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
S&F 300 mm size (length of bolt), fixed (ISI marked) aluminium alloy, anodised, sliding door bolt with hasp and staple ,(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.
S&F 300 mm long 300mm ordinary door springs including roller and roller plate complete all as specified and directed.
S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F in repairs stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
Dismantling timber boarding, any description, fixed in any position with nails complete as specified and directed.
S&F 18mm thick prelaminated particle board/ MDF board interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work of cup board shutter and shelves complete as directed.
M & L second class hard-wood plain fillets square/rectangular wrought face in sectional area n.exc. 3 sq.cm securing with screw complete all as specified & directed.
S&F mild steel continuous piano hinges, bright finish or electro galvanised, width of flap when open 30mm, complete all as specified and directed.
S&F 40 mm dia cupboard knobs fixed with nut, screw and washer of brass,bright finished complete all as specified & directed by Engineer-in-charge.
S&F in repairs 25mm size stainless steel drapery rod with brackets complete all as specified and directed.
S&F in repair drapery rod with brackets both side and corner bulb nobs are approved make complete all as specified and directed.
S&F 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including fixing fittings such as GI nipple for inlet, outlet, washout and overflow etc, including 25mm size ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.
M&L Glazed ceramic coloured tiles in vertical surface 350mm x 250mm x 7mm/450mm x 350mm x 7mm/450x300x7mm/600x300x7mm thick set and jointed in neat cement slurry, pointed in white or coloured cement to match the colour of tiles, over and including 10mm thick backing coat in CM 1:4 to receive tiles, complete all as specified and directed.
M&L for Non skid, joint free (edge cut) coloured ceramic tiles 7 to 8mm thick (Square/ rectangular) polished area of each tiles exceeding 0.06 Sqm but nt exceeding 0.11 Sqm as in floors etc laid over and including 15mm thick screed bed or beeding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete.
S&F in repairs, fancy type, chromium plated, bib tap, cast copper alloy with quater turn flange, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified & directed.
S&F in repair pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for 15 mm bore iron pipe complete all as specified & directed.
S&F vitreous china wash down water closet pan (Pedestal pattern), connection to trap 'P' or 'S' and flush pipe etc seat cover and making good to disturbed surfaces of floor by filling with PCC 1:4:8 type D-2 to match with existing including taking down the existing old one all as specified and directed.
S&F in repairs 10 litre capacity PVC symphonic action type flushing cistern (ISI Marked) low level with inlet ball valve, float and handle & PVC flush pipe, fixed in position and connecting complete.
M/S JATINDERA ENTERPRISES
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .