REPAIR/REPLACEMENT OF INTERNAL WIRING DBS CEILING FANS GEYSERS AND CONNECTED ITEMS INLUDING DAY TO DAY PETTY REPAIR WORK IN OTM/MD ACCN AT SECTOR C UNDER GE(A) BARODA

Amount

Taking down carefully copper / Aluminium point wiring including (light, fan, socket or power complete fittings, such as switches, ceiling roses, pendant holders, Batten holders, shades conical fan regulators, light or power sockets etc) and making good disturbed surfaces of walls roofs etc all as directed.

Taking down carefully UNSV main switch and DB's including MCBs of any size make, type and capacity and depositing at site as directed.

M & L for concealed point wiring complete with multistranded copper conductor (FRLS)1.5 Sqmm size PVC insulated unsheathed cable 1100 volt grade, conforming IS 694 & color code in conduit system of wiring, drawn in including PVC conduit not less than 20 mm dia concealed duly fixed with U-Clips, including cutting chases, finising of slote by means of cement mortor making good to the existing surface of the wall & touching with the existing colour of wall with three coats and making good disturbed surface complete, sunk in pressed steel terminal boxes of required size not less than 1.2 mm thick factory made and factory painted with top cover 3 mm thick plastic laminated sheet fixed with brass screw and washer with all accessories including single core multistranded copper conductor 1.5 sqmm size solid PVC insulated unsheathed cable (FRLS) as earth wire to common earth and connected to earth dolly drawn in same conduit complete all as specified as under :-

One light point controlled by one one/way switch.

One Fan point controlled by one one/way switch.

One 3 pin 5 Amps socket outlet on same board with other switch.

One 3 pin 5 Amps socket outlet on independent board with cable of 1.5 sqmm size.

One light point controlled by two way switches

One bell point controlled by one way switches

All as per item No. 3 above but using 2.5 Sqmm PVC insulated, unsheathed cable for one 3 pin socket outlet 15 Amps on independent board

M & L for point wiring complete with multistranded copper conductor 1.5 Sqmm size PVC insulated unsheathed cable 1100 volt grade, conforming IS 694 & color code including PVC casing caping. the existing colour of wall with three coats and making good disturbed surface complete, sunk in pressed steel terminal boxes of required size not less than 1.2 mm thick factory made and factory painted with top cover 3 mm thick plastic laminated sheet fixed with brass screw and washer with all accessories including single core multistranded copper conductor 1.5 sqmm size solid PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same conduit complete all as specified.

One light point controlled by one one/way switch.

One Fan point controlled by one one/way switch.

One 3 pin 5 Amps socket outlet on same board with other switch.

One 3 pin 5 Amps socket outlet on independent board with cable of 1.5 sqmm size.

One light point controlled by two way switches

One bell point controlled by one way switches

All as per item No. 5 above but using 4 Sqmm PVC insulated, unsheathed cable for one 3 pin socket outlet 15 Amps on independent board

M & L for sub main wiring using two single core 6 Sqmm fire retardant PVC insulated and unsheathed cable with copper conductor 1100 volts grade ISI marked drawing in and including 25 mm dia PVC conduit accessories like bends, tee, etc fix on wall and ceiling and connecting to earth dolly and including 6 Sqmm earth wire, PVC insulated & unsheathed all as directed. (Note Two run of 6 Sqmm main wire and one run of 6 Sqmm earth wire along with conduit shall be measured as one length).

M & L for sub main wiring using two single core 4 Sqmm fire retardant PVC insulated and unsheathed cable with copper conductor 1100 volts grade ISI marked drawing in and including 25 mm dia PVC conduit accessories like bends, tee, etc fix on wall and ceiling and connecting to earth dolly and including 4 Sqmm earth wire, PVC insulated & unsheathed all as directed. (Note Two run of 4 Sqmm main wire and one run of 4 Sqmm earth wire along with conduit shall be measured as one length.)

S&F of 4' 18W LED Tube With Batten with system lumen output of 1800 lumens. System Efficacy should be > 115lm/ W. The Luminaire Should have Cool Daylight Color temp of 6500K & CRI>80.Life 40K burning hrs with 70% lumen maintenace. PF>0.95 Surge Protecton of 3KV.All the Photometrical & Electrical parametrs must be supported by LM79-08 test report from NABL Accridiated LAB OR UL, R9 Value > 0. Lamp starting time is not more than 1 Sec. The LED tube light conforms to applicable IS.Make of LED From Philips/Crompton/ Wipro. .Similar to Crompton LDSL 18-CDL with Master TLED 18W 1800 Lumens

S/F switch piano flush type single pole one way 5 Amp 240 Volts.

S/F switch piano flush type single pole two way 5 Amp 240 Volts.

S/F switch socket combination 2 in 1, 3 pin, 5 Amps flush type 240 Volt.

S/F switch socket combination 3 pin 5 and 15 Amp 2 in one flush with inbuilt indicating lamp.

S & F Bell switch including Bell ding dong type, one way, 240 volts, AC, ISI marked.

S/F ceiling rose surface bakelite three terminal 65 x 50 mm three terminal 250/230 volts ISI marked.

S&F ceiling fan condenser paper type 2.5 MFD make - Jyoti/Usha.

M&L for opening covers of ceiling fan, remove the burnt winding, cleaning the slots and rewinding the fan with supper enammeled copper wire of same wire gauge, warnishing after winding, drying, replacing unserviceable fan bearings No 6201/6202 for 1200.1400mm sweep, greasing, soldering the copper terminal of winding with single core copper multistraded wire of 0.5 sqmm and re-assembling fan, replace of fan capacitor 1.7/2.5mfd and making connection with fan capacitor and connector block,Including Painting fan and blade with super enamelled paint of two coats and marking of MES No, transoporting back after repair, assembling the blades and hanging the fan in its own position to existing fan clamp and down rod with necessary Nut, bolt and washer and testing for smooth functioning after complete repair all as ditrected at site. Note : Quoted rate deems to inclusive of rate of fan capacitor, fan bearing and transporatation charges.

S&F in repair energy efficient 5 star rated ceiling fan 1200mm sweep, single phase 230/240 volts AC and connecting up to including provn of porcilin connector and flexible three core copper conductor of size 23/0.0076 from ceiling rose or connector to ceiling fan and testing on completion, complete all as directed by engr-in-charge. Make : Bajaj/CG/Usha/Orient

S/F in repair TPN DBs Vertical type 4 way with provision for FP as incomer and SP as outgoing all as directed. CAT Part No. IP 43-IK 09 with metal door of CAT No. 6077 50 of Make Legrand or its equivalent in Havells/C&S.

S/F in repair sheet metal enclosure for single pole and neutral 08 way 240 voilts, 100 Amp rated bus bar. IP 43 - IK -09 CAT No. 6077 11 of Make Legrand or its equivalent in Shgnider/C&S/ABB.

S & F MCCB TPN 63 Amps 35 KA rupturing capacity of Make Legrand/C&S/Havells or its equivalent

S & F MCB SPN 32 Amps 10 KA rupturing capacity. Make Legrand/C&S/Havells or its equivalent

S & F MCB SP 5 to 30 Amp 240 Volts

S&F connecting resistance type fan regulator A/C 240 Volts.

M&L for KAPITRODE Earthing complete with Cast Iron pipe electrode, 75mm bore, 3.15mm wall thickness , 2.9 metres length,with GI pipe & funnel, buried directly and preferably vertically in ground with top edge not less than 2.9 metres below ground level connected with earthing lead of 25x5mm dia galvanised iron strip all as specified including testing on completion including the material and labour of the following, Make -Kapilansh Dhatu Udyog (P) Ltd : - (a) Excavation and earth work for drilling hole for electrode in any type of Soil. (b) PCC pit in cement concrete 1:2:4 type B-1 of size 450x450x450mm with Cast iron cover with suitable handle . (c) 40 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed. (d) Requisite quantity of BFC Compound (bentonide powder) and black cotton soil. (e) Testing of earthing.NOTE :- On testing after completion of earthing, if the desired earth resistance is not obtained, the earthing will be re-done by the contractor at his own risk and cost to the entire satisfaction of the Engineer-in-charge. .

S & F wall security light LED type complete with GI bend 1.2 mtr and fixing on wall/pole with clamp, nut & bolt complete all as directed and specified by Engr-In-Charge. CAT Part No.LSTO-25-CDL 25watt of Make CG or its equivalent in Phillips/Wipro.

S&F 7 W LED Bulb with system lumen output of 600 lumens. System Efficacy should be > 85lm/ W. TheLamp Should have Cool Daylight Color temp of 6500K . Lamp should be supplied with E27 Holder. Similar to Philips Ace Saver. Make : Cona/Anchor.

S&F 9 W LED Bulb with system lumen output of 600 lumens. System Efficacy should be > 85lm/ W. TheLamp Should have Cool Daylight Color temp of 6500K . Similar to Philips Ace Saver. Make : Cona/Anchor.

S&F 4' feet LED 1X20W LED tube rod on replacing existing 36/40watt fitting at side as per user requirement, with system lumen output of minimum 2000 lumens suitable for G13 holder with single side connection. The Luninaire should have cool daylight color temp 6500K, CRI >80, PF >0.95, Life class of 40,000 burning hrs with 70% lumen maintenance, Voltage Range:140-270 V, Frequency :50-60 HZ; Internal Surge Protection > 2 KV. LED to mounted on Rod and not directly on the surface of the tube. All the photometrical & electrical parameters must be supported by LM 79-08 test report from NABL accredited LAB or UL switching cycle of 50,000 times. The LED tube light conforms to applicable IS 10322/EN 60598, similar to CG model No : LT8-20-865-2 or equivalent Make of Philips /Havells/Wipro.

S&F Octane LED Panel Round Light fitting 12W LED 6500K of Make Havells Model No LHEBHDP7IZ1W009

Taking down and refixing storage type water heater from wall by disconnecting the electric connection and water inlet/outlet connection from main and repairing the water heater storage type capacity 25/35 ltrs of any type and make, checking the serviceablity of all parts such as inner vesser, rubber gasket, non return valve, heating element, thermostat etc and refixing the same after replacing of unserviceable parts and assembly completet (considered as one unit) and installing and testing the same as per the direction of Engineer-In-Charge.(Supply only for parts against unserviceable parts shall be measured and paid for separately under relavent items given below)

S&F for replacement of heating elements, 1.5 KW 230 volts Make -THEETA/BAJAJ.

S&F for replacement of thermostat immersion point type 15 Amps, 230/250 volts/AC ISI marked Make - THEETA/BAJAJ.

S & F in repair of electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection pipe etc complete all as specified and directed Note : 1) Old water heater shall be deposited to AGE E/M store yard.

Supply and fix in repair Exhaust Fan steel body 450mm size single phase 1400 RPM max air 6120 M3/Hr free delivery 3600 sound level 65-70 complete with louvers Note:-Old Exhaust fan shall be deposited to AGE E/M store yard.

Supply and fix in repair Exhaust Fan steel body380mm size single phase 1400 RPM max air 3250 M3/Hr free delivery 1910 sound level 60-65 complete with louvers Note:-Old Exhaust fan shall be deposited to AGE E/M store yard.

Supply and fix in repair Exhaust Fan steel body300mm size single phase 1400 RPM max air 1710 M3/Hr free delivery 1000 sound level 50-55 complete with louvers Note:-Old Exhaust fan shall be deposited to AGE E/M store yard.

Supply and fix in repair Exhaust Fan steel body225mm size single phase 1400 RPM max air 1710 M3/Hr free delivery 1000 sound level 50-55 complete with louvers Note:-Old Exhaust fan shall be deposited to AGE E/M store yard.

Badri Electricals

motwani and associate

City Light

Gayatri Associates

M/s. RAMESH NARHARI VALEKAR