Construction of Govt. I.T.I. Building at Rajhoon Tehsil Dheera District Kangra.

Amount

Excavation in foundation, trenches etcetera in earth work involving all classification of soil such as pick work, pick jumper work, blasting work, soft or hard rocks including chiseling/wedging out of rocks where blasting work is prohibited or any other mixed variety of intermediate soil, dewatering and removal of slush if arrisen during course of construction and lift upto all heights including stacking the excavated soil not more than three metre clear from the edge of the excavation and then returning the stacked soil in 15 cm (fifteen centimeter) thick layers when required into plinths, sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus excavation earth within all leads,lifts by any mode of transportation and other incidental, as per the direction and entire satisfaction of Engineer-in-Charge. Any loss to the private and public property during course of construction shall be absolute responsibility of the contractor. Rate is inclusive of royalty, malkana, toll tax, GST and other taxes imposed by the government.

Excavation in drains and channels etcetera in earth work in all classification of soil, such as pick work, jumper work, pick jumper work, blasting work, hard and soft blasting, saturated soil including chiseling or any other mixed variety of soil, lift upto any heights, stacking the excavated soil for all heights from the edge of excavation and then returning the stacked soil in 15cm (Fifteen centimeter) layer when required into plinths sides of foundations etcetra Consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as directed by the Engineer-in-charge, within all leads, lifts and other incidentals. Rate is inclusive of royalty, malkana, toll tax, GST and any other taxes imposed by the government.

Providing and laying cement concrete 1:4:8 (One Cement isto Four Sand isto eight) graded stone aggregate 40mm (Forty millimetre) nominal size for haunching of pipes of the 150 mm ( One hundred fifty millimetre) internal diametre including necessary form work and curing complete within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of royalty, malkana, sale tax, toll tax, GST and any other taxes imposed by the government.

Filling in plinth with sand under floor including watering, ramming, consolidating and dressing complete as per PWD specification. The rate is inclusive of cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of royalty, malkana, toll tax, GST and any other taxes imposed by the government.

Providing form work with steel plates of 3.15mm (three decimal one five milimetre) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in foundation,. Footings bases of columns and mass concrete. The rate is inclusive of cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge.Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing form work with steel plates of 3.15mm (three decimal one five milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetra, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in columns, pillars , posts and struts, square, rectangular, polygonal in plain in all floor level including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing form work with steel plates of 3.15mm (three decimal one five milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering strutting and propping etcetra, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors, roofs, landings and the like floor etcetra including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing form work with steel plates of 3.15mm (three decimal one five milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams, cantilevers, girders, lintels, sides, and soffits of beams haunchings, cantilevers, bressumers and lintels upto all depths in all floor including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing form work with steel plates of 3.15mm (three decimal one five milimetre) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors and walls up to any width including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing form work with steel plates of 3.15mm (three decimal one five milimetre) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimetre) so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in stairs cases with slopping or stepped soffits, excluding, landing in all floor including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, sale tax, GST and any other taxes imposed by the government.

Providing form work with steel plates of 3.15mm (three decimal one five milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in vertical surface such as walls up to any thickness / any height including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and laying cement concrete 1:6:12 (One cement isto six sand isto twelve aggregate) graded crushed stone aggregate 40mm (forty millimeter) nominal size mechanically mixed and curing complete, excluding cost of form work in foundation and plinth as per approved specification and drawing including entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and laying cement concrete 1:4:8 (One cement isto four sand isto eight aggregate) graded crushed stone aggregate 40mm (forty millimeter) nominal size mechanically mixed and curing complete, excluding cost of form work in foundation and plinth as per approved specification, drawing including entire carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of royality, malkana, toll tax, GST and any other taxes imposed by the government.

Providing and laying plain cement concrete M-20 (M-Twenty) design mix to obtain the minimum compressive strength 20N/mm2 (twenty newton per square millimetre) with cement content not less than 320 kg/ cum (Three hundred twenty kilogram per cubic metre) mechanically mixed, vibrated & curing complete excluding cost of form work and reinforcement for reinforced concrete work in foundation and plinth as per approved specification, drawing and design including entire carriage of material with in all leads, lifts and other incidentals and further as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of octroi, Royality, Malkana, sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and laying cement concrete work of grade M-20 (M-Twenty) design mix to obtain the minimum compressive strength of 20N/mm2 ( twenty newton per square millimetre) with cement contents not less than 320 kg/ cum (Three hundred twenty kilogram per cubic metre) mechanically mixed and vibrated and curing complete excluding cost of form work and reinforcement for reinforced concrete work in foundation footing, base of columns, and the like mass cooncrete as per approved specification, drawing and design including entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of octroi, Royality, Malkana, toll tax, GST and any other taxes imposed by the government.

Providing and laying cement concrete work of grade M-20 (M-twenty) design mix to obtain the minimum compresive strength of 20N/mm2 (twenty newton per square millimetre) with cement content not less than 320 kg/cum (Three hundred twenty kilogram per cubic metre) mechanically mixed and vibrated including curing complete as per PWD specification, drawing and design excluding cost of form work and reinforcement for reinforced concrete work in coulmn, pillars posts and struts upto any floor level including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of octroi, Royality, Malkana, toll tax, GST and any other taxes imposed by the government.

Providing and laying cement concrete work of grade M-20 (M-twenty) design mix to obtain the minimum compresive strength 20N/mm2 (Twenty newton per square millimeter) with cement content not less than 320 kg/cum (Three hundred twenty kilogram per cubic metre) and curing complete, mechanically mixed and vibrated as per approved specification, drawing and design, excluding cost of form work and reinforcement for reinforced concrete work in suspended floor, roofs, landing and shelves and their supports balconies, beams, girder, bressumers and cantiliver upto any floor level including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of octroi, Royality, Malkana, toll tax, GST and any other taxes imposed by the government.

Providing and laying cement concrete work of grade M-20 (M-twenty) design mix to obtain the minimum compresive strength of 20N/mm2( twenty newton per square millimetre) with cement content not less than 320 kg/cum (Three hundred twenty kilogram per cubic metre) mechanically mixed and vibrated including curing complete as per approved specification, drawing and design, excluding cost of form work and reinforcement for reinforced concrete work in stair cases (except spiral stair cases) excluding landings, but including preparing of top surfaces and finishing of nosing upto all floor levels including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of octroi, Royality, Malkana, toll tax, GST and any other taxes imposed by the government.

Providing and laying cement concrete work of grade M-20 (M-twenty) design mix to obtain the minimum compresive strength 20N/mm2 (twenty newton per square millimetre) with cement content not less than 320 kg/cum (Three hundred twenty kilogram per cubic metre) mechanically mixed and vibrated including curing complete as per PWD specification, drawing and design including cost of form work but excluding cost of reinforcement for reinforced concrete work in moulding as in cornies, window sills etcetra not exceeding 15cm in girth upto all floor levels including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of octroi, Royality, Malkana, toll tax, GST and any other taxes imposed by the government.

Providing and laying cement concrete work of grade M-20 (M- Twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (twenty newton per square millimetre) with cement contents not less than 320 kg (Three hundred twenty kilogram) per cubic metre, mechanically mixed and vibrated including curing complete in reinforced concrete Chhajjas for all thickness up to floor all levels up to all heights including finishing the exposed surface with cement mortar 1:3 (One cement isto Three sand) to give a smooth and even surface including centering/ form work and curing complete but excluding the cost of reinforcement for reinforced concrete work including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of octroi, Royality, Malkana, toll tax, GST and any other taxes imposed by the government.

Providing and laying cement concrete work of grade M-20 (M-twenty) design mix to obtain the minimum compresive strength of 20N/mm2 (twenty newton per square millimetre) with cement content not less than 320 kg/ cum (Three hundred twenty kilogram per cubic metre) mechanically mixed and vibrated including curing complete as per PWD specification, drawing and design, excluding cost of form work and reinforcement for reinforced concrete work in wall any thickness but not less than 0.10 M( Zero point ten)meter including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of octroi, Royality, Malkana, toll tax, GST and any other taxes imposed by the government.

Providing and laying tor steel of TataTISCO, SAIL reinforcement for reinforced cement concrete work including bending, binding and placing in position complete in all respects as per approved drawing, design, and specification in all floor levels including the cost of binding wire and dewatering if arrisen during placement of reinforcement as per PWD specification and approved, drawing design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of octroi, Royality, Malkana, toll tax, GST and any other taxes imposed by the government.

Providing and laying Damp Proof Course 100mm (One Hundred millimetre) thick with cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 12.5mm (Twelve decimal five millimetre nominal size) mechanically mixed including cost of form work and curing complete, as required at site as per H.P.P.W.D. specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, sales tax or other taxes imposed by the Government.

Applying a coat of hot bitumen (mexphalt) 80/100 (Eighty by hundred) grade or VG-10 using 1.70 kg (one decimal seven) kilogram per square meter on damp proof course after cleaning the surface with a piece of cloth lightly socked with kerosene as per PWD specification including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge.

Second class brick work using common burnt clay building bricks in cement mortar 1:6 (one cement isto six sand) in super structure upto all floor levels as per PWD specification, drawing, design and curing complete including scaffolding and cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of octroi, Royality, Malkana, toll tax, GST and any other taxes imposed by the government.

Second class half brick work using common burnt clay building bricks with hoop iron in cement mortar 1:4 (one cement isto four sand) in super structure as per PWD specification, drawing, design and curing complete including scaffolding, cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of octroi, Royality, Malkana, toll tax, GST and any other taxes imposed by the government.

Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth including raking out joints in cement mortar 1:3 (one cement isto three sand) including curing complete as per approved specification, drawing, design and curing complete including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of octroi, Royality, Malkana, toll tax, GST and any other taxes imposed by the government.

Random rubble masonry with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement isto six sand isto Twelve graded stone aggregate) 20 mm (Twenty millimetre nominal size) at plinth level in cement mortar 1:6 (one cement isto six sand ) including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth including raking out joints in cement mortar 1:6 (one cement isto six sand) including curing complete as per approved specification, drawing, design and curing complete including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of octroi, Royality, Malkana, toll tax, GST and any other taxes imposed by the government.

Stone filling tightly hand packed under flooring including ramming and consolidation complete as per the direction of Engineer-in-Charge including carriage of material with in all leads, lifts and other incidental . The rate is including of octroi, royality, Malkana, toll tax , sales tax or other taxes imposed by the government.

Providing and fixing M.S. channels in doors, windows, clerestory windows frames manufactured from M.S. channel section 75x40x4mm (Seventy five into Forty into four millimetre) with M.S. flat 75x4mm (Seventy Five into Four millimetre) combination as per specifications, design, drawing including hinges, jambs, beeds if required thrashold of M.S. angles 50x25mm (Fifty into Twenty five millimetre) welded or rigidly fixed by mechanical means lugs, with split ends tails to each jambs including steel butts hinges 2.5mm (Two decimal five millimetre) thick with a provision of locking arrangements, shock observers as specified and applying a coat of approved steel primer after pretreatment of the surfaces as directed by the Engineer-in-Charge. The rate is inclusive for carriage of material with in all leads, lifts and other incidentals including sale tax, toll tax, GST or all type of other taxes imposed by the Government.

Providing and fixing M.S. angle of TATA/Sail in doors, windows clerestory windows frames (Single rebate) manufactured from M.S. angle section 35x35x5mm/ 40x40x5mm (Thirty five into thirty five into five millimetre)/ (Forty into forty into five millimetre) with M.S. flat 50x4mm (Fifty into Four millimetre) combination as per specifications, design, drawing including hinges, jambs, beads if required thrashold of M.S. angles 50x25mm (Fifty into Twenty five millimetre) welded or rigidly fixed by mechanical means lugs, with split ends tails to each jambs including steel butt hinges 2.5mm (Two decimal five millimetre) thick with a provision of locking arrangements, shock observers as specified and applying a coat of approved steel primer after pretreatment of the surfaces as directed by the Engineer-in-Charge. The rate is inclusive for carriage of material with in all leads, lifts and other incidentals including sale tax, toll tax, GST or all type of other taxes imposed by the Government.

Providing and fixing angle iron cup-board (frame manufactured from M.S angle iron sections 25x25x5mm (Twenty five into twenty five into five millimetre) thickness including hinges jambs, lock guards, beed and if required angle threshold of mild steel 25x25x5mm (Twenty five into twenty five into five millimetre) welded or rigidly fixed by mechanically means lug with split and tails to each jambs including steel butt hinges 2.5 mm (Two decimal five millimetre) thick with provision for looking arrangements and shock absorbers as specified and applying a coat of approved steel primer after pre-treat-ment of the surfaces including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 12mm (Twelve millimetre) thick prelaminated board both side bwp phenol bonded exterior/interior grade of Action/Tesa/Century/Kitlam ISI marked panelled shutters with 40mm (Forty millimetre) thick frame of Ist class deodar wood for doors including bright finished/ black enamelled butt hinges with necessary screws. The rates are inclusive of cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing Factory made 35mm (Thirty five millimetre) thick both side commercial phenol bonded of (Century/ Alpro/ Duroply) ISI marked IS No.-2202 flush door shutter interior grade core of block board construction with Ist class frame of hard wood and well matched 1st class Indian Teak ply veneering with vertical grains or cross bands and face veneer on both faces of flush door as per approved specifications including black enamelled M.S. butt hinges with necessary screws including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing 40mm (forty millimeter) thick second class deodar wood wire gauge shutters using galvanized M.S. wire gauge of IS gauge designation 85g (eighty five) gauge with wire of diameter 0.56mm (zero point five six millimetre) for doors, windows and clerestore windows including bright finished black enamelled iron hinges with necessary screws including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing Factory made PVC door frame of size 50x47mm (Fifty into forty seven millimetre) wall thickness of 5mm, made out of extruded 5mm (Five millimetre) rigid PVC foam sheet mitred at corner jointed with 2 Nos. (Two numbers) of 150mm (One hundred fifty millimetre) long brackets of 15x15mm (Fifteen into fifteen millimetre) M.S. squares tube the vertical door profiles to be reinforced with 19x19mm (Nineteen into nineteen millimetre) M.S. Square tube metre to be of 19 (nineteen) gauge E.P.D.M rubber gasket weather seal to be provided through out the frame including fixing of door frame to wall using M.S. screws of 100mm size complete including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing to existing door frames, 30mm thick factory made PVC panelled door shutter consisting of frame made out of M.S. tubes of 19 gauge( Ninteen gauge) thickness and size of 19mm x19mm ( Ninteen into ninteen millimetre) for styles and 15mmx15mm (fifteen into fifteen millimetre) for top & bottom rails, M.S. frame shall have a coat of steel primers of approved make and manufacture M.S. frame covered with 5mm (five millimetre) thick heat moulded PVC "C" channel of size 30mm (thirty millimetre) thickness, 70mm (Seventy millimetre) width cut of which 50mm (fifty millimetre) shall be flat and 20mm (twenty millimetre) shall be tappred in 45 ( forty five)degree angle on either side forming style and 5 mm( five millimeters) thick, 95mm ( ninety five millimetre) wide, PVC sheet out of which 75mm (Seventy five millimetre) shall be flat and 20mm( twenty millimetre) shall be tapered in 45 ( forty five)degree on the inner side to form top and bottom rail and 115mm (one hundered fifteen millimetre) wide PVC sheet out of which 75mm (seventy five millimetre) shall be flat and 20mm ( twenty millimetre) shall be tapered on both side to form lock rail, top, bottom and lock rail shall be provided either side of the panel 10mm( ten millimetre) thick, 20mm (twenty millimetre) wide cross PVC sheet be provided as gap insert for top rail and bottom rail paneling of 5mm (Five millimetre) thick both side PVC Sheet to be fitted in the M.S. frame welded/sealed to the style & rails jointed mitred and jointed with solvant cement adhesive including fixing of PVC shutter with existing frame with MS butt hinges/riveted with necessary screws of code No. 9.120 of Rajshri including cost and carriage of materials with in all leads, lifts and other incidentals, as per specifications, approved drawing, design and as per direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing steel glazed doors, windows and ventilators of standard rolled steel sections joints mitred and welded with 16x3.15mm (Sixteen into three decimal fifteen millimetre) lugs 10cm (Ten centimetre) long with steel plugs and screws or rawl plugs screws or with fixing clips or with bolts and nuts as required and iron fitting, including providing and fixing of glass pans with glazing clips and special metal sash putty of approved make complete including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Fixed steel windows

Top hung Ventilators

Providing and fixing 5mm ( five millimetre) thick Frosted glass glazing for toilet window and ventilators shutters fixed with PVC / neopren gaskets complete as per the Architectural Drawings approved specification and design and the direction of the Engineer-in Charge, (Cost of aluminium snap beeding shall be paid in basic item).The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing factory made double steel shutter side hungs (one glazed and one wire gauge) for steel windows side hung (one glazed and other wire gauge) of standard rolled steel sections, jointing, mitered, welded and manufactured to relevant ISI standard specification with steel plugs and screws or rawl plugs screws or with fixing clips or with bolts and nuts as required and iron fitting, including providing and fixing of 5mm (Five millimetre) thick glass pans with special putty of glazed side of shutter and wire gauge of IS designation 85G with metal beading on other side complete including priming coat of red lead paint and cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing M.S. plain grill 10x10mm (Ten into ten millimetre) square bar in combination of 20x4mm (Twenty into four millimetre) M.S. flat as per design required pattern in steel frames of windows etcetera with M.S. round headed bolts and nuts or by screws including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing complete box of cup board shall be made of 25mm (Twenty Five millimetre) thick water proof termite resistant commercial board of Uniply / Green ply/ ISI marked for shutters Back side of cup board shall have 8 mm (Eight millimetre) thick water proof ply. All the cut portion of board shall have 6 mm (Six millimetre) thick hard wood edging. The shutter from all side shall be finished with 1mm thick lamination ISI Marked of approved shade of Century / Greenlam /Action Tesa and 19 mm (Nineteen millimetre) thick water proof comercial board of uniply / Greenply for shelves including hinges, handle, knobs megnatic catcher complete as per specifications, approved drawing, design, as per the entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals (Front side of the cup board shall be measured and paid for only). The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 25mm (Twenty five millimetre) thick water proof termit resistante commercial board of Centuary/ Kit ply/ Dura ply/ Marino (ISI marked) for SDB/FF shutters with 6mm (Six millimetre) thick hard wood edging and to be finished with mica laminatory of approved shades complete including bright finished black enamelled iron butt hinges with screws etcetera complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidential, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing coloured / anodized aluminum sliding door bolt, anodized transparent or dyed to required colour and shade with bolts and nuts, screws etcetra complete including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive, of toll tax, GST and any other taxes imposed by the government.

300x16mm (Three hundred into sixteen millimeter) size

250x16mm (two hundred fifty into sixteen milimeter) size

Providing and fixing 250x10mm (Two hundred fifty into ten millimetre) size coloured anodized aluminum tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetra complete including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing 100x10mm (Onw hundred into ten millimetre) size M.S. tower bolts (barrel type) dyed to required shade and colour with screws etcetra complete including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing 150mm (one hundred fifty millimetre) size coloured / anodized aluminum handle anodized transparent or dyed to required shade or colour with necessary screws etcetra complete including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing 125mm (one hundred twenty five millimetre) size M.S. handle dyed to required shade or colour with necessary screws etcetra complete including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing 150 mm (one hundred fifty millimetre) M.S. hooks and eyes complete including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 65x35mm (Sixty five into thirty five millimetre) special quality bright finished brass cup board lock with six leavers including necessary screws etcetera complete (Indian make) including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing 150mm (One hundred fifty millimetre) oxidized M.S. double acting spring hinges with necessary screws complete including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 100mm (One hundred millimetre) bright finished brass floor door stopper with rubber cushion screws etcetra to suit shutter thickness complete including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 20mm (Twenty millimetre) diametre stainless steel curtain rod and brackets plugs etcetra complete including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Kota stone 55x55/55x27.50cm with 7.5 cm (Seven decimal five centimetre) wide Jaisalmer yellow band flooring 20mm (twenty millimetre) thick laid over a base of cement mortar 1:4 (One cement isto four sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing, moulding and nossing complete as per approved specification, drawing, design and entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Kota stone slab 25 mm thick in risers of steps, skirting dado and pillars laid on 12 mm (twelve millimetre) (average) thick cement mortar 1:3 (One cement isto three sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing as per approved specification, drawing, design and entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Kota stone slab 25 mm thick in Single slab with round noising for treads and riser of stairs of uniform colour laid over 20mm (Twenty millimetre) average thick base of cement mortar 1:4 (One cement isto four sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing, polishing as per approved specification, drawing, design and entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and laying 600x600 mm (Six hundred into six hundred millimetre) double charge / Ultra Charge vetrified tiles of Resitile/ Nitco/ Kajaria/Rak/Johnson/Bell water proof stain and impact resistent heavy duty vitrified tiles of approved shade and colour in flooring laid over 12mm (Twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete as per specifications, approved drawing and design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and laying 600x600 mm (Six hundred into six hundred millimetre) double charge / Ultra Charge vetrified tiles of Resitile/ Nitco/ Kajaria/Rak/Johnson/Bell water proof stain and impact resistent heavy duty vitrified tiles of approved shade and colour in skirting, riser of steps and dados laid over 12mm (Twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete as per specifications, approved drawing and design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and laying Precast terrazzo tiles 300x300x25mm (Three hundred into three hundred into twenty five millimetre) automatic Hydraulic compressed and polished Precast Terrazzo tiles of NTC in flooring and skirting ISI marked No IS: 1237 top layer in (50%) (Fifty Percent) white and 50% (Fifty percent) in white yellow dark green and maroon chips of size 0,B and 2B size with marble chips of specified sizes laid in floors, treads of steps and landings laid on a bed of 25mm (Twenty five millimetre) average thickness of cement mortar 1:6 (one cement isto six sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (where ever required) including rubbing and polishing complete, as per specifications, approved drawing and design including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and laying 25mm (Twenty five millimetre) thick Precast terrazzo tiles automatic Hydraulic compressed and polished Terrazzo tiles of NTC in skirting size 30cmx10cm (Thirty centimetre into ten centimetre) ISI marked No IS: 1237 top layer in (50%) (Fifty Percent) white and 50% (Fifty percent) in white yellow dark green and maroon chips of size 0,B and 2B size with marble chips of specified sizes with cement mortar 1:3 (one cement isto three sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (where ever required) including rubbing and polishing complete as per specifications, approved drawing and design including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and laying 300x300 mm (three hundred into three hundred millimetre) Antiskid Cermic Tiles of Premimum quality of Nitco/ Kajaria/ Johnson / Orient Bell in flooring & skirting laid over 12mm (Twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete upto all floor level in all heights as per approved specifications, drawing, design and entire carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in- Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and laying 300x450 mm (three hundred into four hundred fifty millimetre) Cremic Glazed tile of Kajaria/ Nitco/ Simpolo/ Somany/ Jonson/ Orient Bell in skirting, riser of steps and dado on 12mm (Twelve millimetre) thick cement mortar 1:3 ( one cement isto three sand) and jointed with white cement slurry mixed with pigment to match the shade of tiles as required complete upto all floor level in all heights as per approved specification, drawing, design and entire carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in- Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and laying 300x450 mm (three hundred into four hundred fifty millimetre) Cremic Glazed tile of Kajaria/ Nitco/ Simpolo/ Somany/ Jonson/ Orient Bell with one border matching contrast at top on 12mm (Twelve millimetre) thick cement mortar 1:3 ( one cement isto three sand) and jointed with white cement slurry mixed with pigment to match the shade of tiles as required complete upto all floor level in all heights as per approved specification, drawing and design and entire carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in- Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and laying 50 mm (Fifty millimetre) thick Ironite flooring with metallic concrete hardner topping under layer of 35 mm (Thirty five millimetre) thick cement concrete 1:2:4 (One cement isto two sand isto four graded stone aggregate 20 mm (Twenty millimetre) nominal size) and top layer of 15 mm (Fifteen millimetre) thick metallic concrete hardner consisting of mix 1:2 (One cement hardner mix isto two stone aggregate 6 mm (Six millimetre) nominal size) by volume with metallic hardening compound of approved quality is mixed in the ratio 4:1 (Four parts of cement isto One part of metallic floor handening compound of approved quality by weight) complete as required as per approved specification, drawing, design and entire carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in- Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and laying 19 mm (Nineteen millimetre) thick polished Grey/black granite stone in work counter / top having semiround noising, moulding and laid over 20 mm ( twenty millimetre) thick base of cement mortor 1:3 (one cement isto three sand) and jointed with cement slury mix pigment to match the shade of granite stone including rubbing, polishing, moulding, and noising complete as per approved specification, drawing and design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and laying 300x300x25mm (Three hundred into three hundred into twenty five millimetre) labrador design (Rainbow series) Tile of NTC/ Atlantic/ Unistone flooring on 20mm (twenty millimetre) average thick base of cement Mortar 1:3 (One cement isto three sand) laid on Ramp and jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing, polishing, cutting and moulding complete and carriage of materials within all leads, lifts and other incidentals. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and laying 50 mm (Fifty millimetre) cement concrete topping 1:2 (One isto two) (One cement isto two sand) stone aggregate of size 4.75 mm (Four decimal seven five millimetre) and below, by volume) laid over and finished monolithic with base concrete complete as per approved specification, drawing and design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and laying Unistone 12mm (twelve millimetre) thick cladding on wall surface with 12mm ( twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) and jointed with cement slurry to match the stone including scaffolding, cost and carriage of material with in all leads, lifts and other incidentals as per specifications, approved drawing, design and further as per the direction and entire satisfaction of Engineer- In-Charge .Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing plinth protection with 40 mm ( Fourty millimetre) thick interlocking tiles/ cement concrete paver block of NTC with 23 cm ( twenty three centimetre) dia half round RCC pipe for drainage purpose laid over 10cm (ten centimetre) thick cement concrete 1:4:8 ( one isto four isto eight) in bedding/ haunching complete including cost and carriage of material with in all leads, lifts and other incidentals, as per drawing, design and specifications, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 0.60mm (zero decimal six zero millimetre) thick prepainted steel sheet (IS marked Z-120) of TATA Durashine/ Reliance / Jindal steel over steel truss in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating of back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks,bolts and nuts 6mm (six millimetre) diametre with prepainted limpet, rubber washers complete with all accessories as required as per specification, drawing and design including carriage of materials with in all leads, lifts and other incidentals as per the direction and entire satisfaction of Engineer-in-charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing pre-painted steel sheet ridge or hips of TATA Durashine/ Reliance/ Jindal steel 60cm (sixty centimetre) over all with 0.60mm (zero decimal six zero millimetre) thick prepainted sheet in roofing with hot dipped metalic zinc coated sheets with top coat of regulat modified polyster organic coating of 20 (twenty) microns over 5 (Five) microns primer coating + back coating of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetre) dia, prepainted bitumen washers complete in all respect as per approved specifications, drawing and design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing prepainted steel sheet valleys 90cm (Ninety centimetre) over all with 0.60mm (zero decimal six zero millimetre) thick prepainted sheet of TATA Durashine/ Reliance/ Jindal steel in roofing with hot dipped metalic zinc coated sheet with top coat of regulatr modified polyster organic coating of 20 (twenty) microns over 5 (Five) microns coating + back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with J or L hooks, bolts and nuts 6mm (Six millimetre) dia with prepainted limpet and bitumen washers complete in all respect as per specifications approved drawing and design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing flashing 38cm (Thirty eight centimetre) overall with 0.60mm (zero decimal six zero millimetre) thick prepainted sheet of Tata/Reliance/ Jindal steel with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating + back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetre) dia metre & prepainted G.I. limpet & bitumen washers complete including cost and carriage of materials with in all leads, lifts and other incidentals, as per specifications, approved drawing, design and further as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing M.S. B.P. sheet 2 mm (two millimetre) thick of TATA/SAIL for eaves board/Facia/Soffit/Ceiling including cutting, fixing and jointing with gass/electric welding with steel roof member and applying a coat of red lead primer complete as per PWD specification, approved drawing and design (frame work is to be measured and paid for separately) including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 30cm (Thirty centimetre) wide 25cm (Twenty five centimetre) deep plain G.I. sheet gutter of 0.60mm (zero decimal six zero millimetre) thick sheet fixed with bolts, nuts and washers etcetra having dome shape gratting including making necessary connections with rain water pipe complete including cost and carriage of material with in all leads, lifts and other incidentals, as per specifications, approved drawing and design, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 150 mm (One hundred fifty millimetre) diametre high pressure P.V.C Rain water pipe of Supreme/Finolex/Prince/ Relpipe (Reliance)/ Vectus working pressure not less than 6.00 kg/cm2 (Six kilogram per square centimetre) I.S.I Marked including fixing with approved adhesive etcetra complete including carriage of material within all leads, lifts and other incidentals. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing on wall face PVC accessories for rain water pipes of Finolex/Supreme/ Prince/ Relpipe (Reliance)/ Vectus including filling the joints with approved adhesive complete as per PWD specification, approved drawing and design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

150mm (one hundred fifty millimetre) dia PVC plain bend

150mm (one hundred fifty millimetre) dia PVC shoe

Providing and fixing 150mm (One hundred fifty millimetre) dia metre M.S. holder bat clamps of approved design to P.V.C pipes embedded in and including cement concrete block 10cmx10cmx10cm (Ten centimeter into Ten centimeter into Ten centimeter) of 1:2:4 (One cement is to Two Sand is to Four graded crushed stone aggregate 20mm (Twenty milimetre) nominal size and cost of cutting holes and making good the wall etcetera. The rate is inclusive of cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer- In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Supplying and fixing rolling shutters having width below 3.5m (Three decimal five) metre of approved make made of 80 mmx1.25mm (Eighty millimetre into one decimal two five millimetre) M.S laths interlocked together through their entire length and joined together at the end by end locks mounted on specially designed pipe shaft,with brackets side guides and arrangements for inside and outside locking with push pull operation complete but excluding the cost of the top cover and spring including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing 27.5 cm (Twenty seven decimal five) centimetre long wire spring grade No.2 for rolling shutters complete as per specifications including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing top cover for rolling shutters having width bolow 3.5 m (Three decimal five) metre complete as per specifications including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Steel work welded in built up sections of Tata/Sail in beams, joists, channels, angles, tees flats with connecting plates or angles, cleats as in trusses and trussed purlins, main and cross beams, hips, jack rafters, purlins connect to common rafter and like work including cutting hoisting fixing in position & applying a priming coat of red lead paint complete including entire carriage of material within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

6mm (six millimetre) cement plaster 1:3 (one cement isto three sand) in ceiling and curing complete as per PWD specification including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

15mm (fifteen millimetre) thick cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers or rounded angles not exceeding 80mm (eighty millimetre) in girth, in rough side with cement mortar 1:6 (one cement isto six sand) complete as per PWD specification including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

15mm (fifteen milimeter) thick cement plaster on the fair side of brick/concrete/stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers or rounded angles not exceeding 80mm (eighty millimetre) in girth, with cement mortar 1:6 (one cement isto six sand) including curing as per PWD specification and cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

15mm (fifteen millimetre) thick cement plaster in single coat on the fair side of brick/concrete/stone walls for exterior plastering upto any floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty millimetre) in girth, with cement mortar 1:5 (one cement isto five sand) including curing as per PWD specification and cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

15mm (fifteen millimetre) thick cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty millimetre) in girth, with cement mortar 1:3 (one cement isto three sand) including curing as per PWD specification including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and laying 20mm (Twenty millimetre) thick Cement plaster with 6mm (Six millimetre) grove @ 15cm (Fifteen centimetre) centre to centre in two coats, backing coat 15mm (Fifteen millimetre) and finishing coat 5mm (Five millimetre) thick on rough side of brick/stone masonry walls for exterior plastering upto floor all level including arrises,internal rounded angles,chamfers or rounded angles not exceeding 80mm (Eighty millimetre) in girth and finished even and smooth complete as per specifications, approved drawing, design and elevation including curing as per PWD specification and cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Applying a priming coat on wall concrete/ masnory/ Asbestos/ cement/ plastered surfaces of Asian Paint/ Dulux Paints/ Berger Paints/ Nerolac Surksha of approved brand and manufacture and of required shade on undecorated wall surfaces (two coats) to give an even shade after throughly brushing the surface to remove all dirt and remains of loose powedred material as per PWD specification including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Finishing wall with Apex weather proof exterior grade emulsion of Asian paint/ Nerolak Suraksha paint/ Berger paint/Dulux paint of approved brand and manufacture and of required shade on undecorated wall surfaces (Two or more coats) to give an even shade after thoroughly brushing the surface to remove all dirt, dust and remains of loose powdered material including cost and carriage of material with in all leads, lifts and other incidentals, as per specificatins, approved drawing, design as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Applying Birla white wall care putty over plaster surface after throughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters and sand papered smooth to give final matt finish to the surface complete including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Applying two or more coat of Acrylic Washable emulsion of Asian paint / Nerolac Suraksha paint / Berger paint / Dulux paint for interior painting with brushes plain smooth finish composed of acrylic polymere in emulsion inorganic including cost and carriage of materials with in all leads, lifts and other incidentals as per specifications, approved drawing, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Wall painting (two coats) with acrylic emulsion paint of Asian paint / Nerolac Suraksha Paint/ Berger paint / Dulux paint of approved shade for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty required for matting the surface and cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Applying a priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning, oil, grease, dirt and other foreign matter, sand papering and knotting with ready mixed paints of Asian/ Nerolac Paint brushing wood primer pink as per PWD specification including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Painting two coats (excluding priming coat) on new wood and wood based surfaces with enamel paint of Asian/ Nerolac Paint brushing to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters and sand papering and knotting as per PWD specification including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint of Asian/ Nerolac Paint to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters complete as per PWD specification including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and Fixing 50mm (Fifty millimetre) diametre hollow stainless steel pipe knock down railing of kich AISI 316 fixed over 35mm (Thirty five millimetre) diametre S.S flat baluster in combination with 15x20mm diametre baluster (Design code DT-53-2 - 163) placed at 1200mm (Twelve hundred millimetre) diametre centre to centre along with 3 (Three) Numbers @ 16mm (Sixteen millimetre) mid rail connected at the side of baluster with fixture. The baluster would be fixed on the floor with casted base plate of minimum 6mm (Six millimetre) thickness. Base plate shall be concealed with suitable S.S 316 grade cover cap. Railing height to be taken 85 cm (Eighty five centimetre) from floor level complete in all respect as per specifications, approved drawing and design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 50 mm ( fifty millimetre) dia hollow stainless steel pipe hand rail slip resistance with rounded ends at two level at 75 cm and 90 cm ( Seventy five centimetre and ninety centimeter) high and extended 30 cm ( thirty centimeter) beyond top and botton of ramp as per detail and 25 mm ( twenty five millimetre) dia SST bullasters welded to 50 mm ( fifty millimetre) dia SST pipe embended in cement concrete @ 600 mm (six hundred millimetre) center to center as per detail drawing, design and specification including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax toll tax, GST and any other taxes imposed by the government.

Providing and fixing 600x600x16mm (Six hundred into six hundred into sixteen millimetre) dune RH 99 tiles of Armstrong/ Sant Gabion/ Dexune/Prolad mineral fiber tiles of gyproc with wood wool backing 40mm thick layer and fixed over power coated T-Grid system @ 600mm (Six hundred millimetre) centre to centre complete as per pettern, approved drawing, desing and specifications including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing 595x595x6 mm (Five hundred ninety five into fiive hundred ninety five into six millimetre) designer board of everest (E-Board) ceiling with pre-painted GI channel framing @ 600 mm c/c (Six hundred millimetre centre to centre) complete as per PWD specification,approved drawing, design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing acoustical panels of 600x1200x25mm (six hundred into twelve hundred into twenty five millimetre) of Dexune acoustical/ Himalyan acoustical/ Armstrong acoustical/Prolad acoustical panels fixed with steel screw as per detail drawing and specification, as per direction of Engineer-in-Charge including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and laying 60 mm (Sixty millimetre) thick heavy duty precast cement concrete interlocking paver blocks of NTC/ Unistone/Atlantic with vibro compacted upto M-50 grade including border or kurb block grey or coloured over sub-base of concrete laid over 25mm( twenty five millimetre) thick average thickness of cement mortar 1:4 (one cement isto four sand) and jointed with neat cement slurry mixed with pigment to match the shade of blocks including curing rubbing & polishing complete (Sub base concrete floor to be measure sepertely) including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing 1200x1800 mm (Twelve hundred into eighteen hundred millimetre) green chalk board/Black board shall be made of steel of thikness 0.3 to 0.4 mm. (zero decimal three to zero decimal four millimetre) of Land mark/Pro mark It shall have vitreous Enmal coating of 0.095 mm (zero decimal zero nine five millimetre) minimum thickness on top and 0.3 mm (zero decimal three millimetre) on the back. Top shall be free from waviness and shall show excellent erase ability. The core material shall be 9mm (Nine millimetre) thick MDF board heaving bluk density of 750kg/cum (Seven hundred fifty kilogram per cubic metre) and grade-1 as per IS : 212406-203 edition 2.2. The backing material sheet shall be min. 0.25mm (zero decimal two five millimetre) thick electro galvanised steel sheet conforming to is: 277-2003. The board shall be fixed on the wall with specially designed J clamps and Sq. clamps with help of Nylon sleves and screws as per site requirement and as per specification including cost and carriage of material with in all leads, lifts and other incidentals. The rate is inclusive of all type of taxes imposed by the government.

Expension joint system related with wall joint (internal and external) location as per drawing and direction of Engineer-in Charge. The joint shall be filled with polysterence back or rod base member self alinging /centering arriangement and support. The material shall be of such that it provides as expension joint system suitable for vertical wall to wall/ wall to corner application, both new and exisitng construction in office building and complexes with no slipping down tendancy amongest the component of the joint system. It shall be filled with sealent of Dr. Fixit/Pedelite C.I. Co. T-680. The joint shall utilize light weight with polysterence back or rod surfaces mechanically snap locking multicelluar to facilitate movement as per specification and approved drawing including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing orisa Pan No 20090 of size 53x41 cm ( fifty three into forty one centimeter) vitreous china water closet squatting pan (Indian Type W.C. Pan) of Cera/hindware/ Jaquar of star white/ snow white shade with low level PVC cistern (earth work, bed concrete, foot rest PVC cistern and trap to be measured and paid for separately) including entire carriage of material within all leads, lifts and other incidentals as per direction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing vitreous china European type E.W.C. of star S. No 20087 (S-10) of size 57x35x39 cm (fifty seven into thirty five into thirty nine centimetre) wash down water closet of hindware/Jaquar/cera of star white/ snow white shade with integral P or S trap including jointing the trap with soil pipe in cement mortar 1:1 (one cement isto one sand) including entire carriage of material within all leads, lifts and other incidentals, as per direction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing vitreous china E.W.C. Matrix wash down water closet of hindware/Jaquar/cera for person with disability of star white/ snow white shade with integral P or S trap including jointing the trap with soil pipe in cement mortar 1:1 (one cement isto one sand) including entire carriage of material within all leads, lifts and other incidentals and further as per direction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 100mm (One hundred millimeter) size PVC ‘P’ or ‘S’ trap for water closet (squatting pan) including jointing the trap with the pan and soil pipe with adhesive including entire carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing plastic seal (solid type) and cover of Hindware/ Jaquar/ Cera for wash down water closet with C.P. brass hinges and rubber buffers etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifiations, direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing 10.00 (Ten) litres capacity P.V.C low level dual flushing cistern (Sleek plus) of Cera/Hindware/Jaquar with a pair of G.I.or mild steel brackets and fittings such as PVC syphonic appratus, mosquito proof lid of PVC union and coupling for connection with intet, outlet and over flow pipe including cutting holes and making good the same and connection the flush board with cistern and closet (over flow pipe to be measured and paid for separately) including entire carriage of materials within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing vitreous china wash basin Delta No 10010 and size 55x40 cm ( fifty five into forty centimetre) with pedestial of Hindware/Cera/Jaquar of star white/ snow white shade with double hole for pillar trap and C.I. or M.S. brackets painted white including cutting holes in walls and making good the same with all fitting as per specifications, approved drawing including entire carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing vitreous china under counter wash basin Delta No 10080 and size 58x43 cm ( fifty eight into forty three centimetre) without pedestial of Hindware/Cera/Jaquar of star white/ snow white shade with double hole for pillar trap and C.I. or M.S. brackets painted white including cutting holes in walls and making good the same with all fitting as per specifications, approved drawing including entire carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing vitreous china wash basin with pedestial of Matrix of Hindware/Cera/Jaquar of star white/ snow white shade with double hole for pillar trap with C.I. or M.S. brackets painted white including cutting holes in walls and making good the same with all fitting as per specifications, approved drawing including entire carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge (Pedestial to be measured and paid). Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 32mm (Thirty two millimetre) diametre C.P. brass waste (Heavy duty make) ISI marked NO-8931 & 8934) of continental series of Jaquar/ Classic series of Hindware/ Floral series of Cera/ Hindon series of Jal/ Vintage series of kerovite for wash basin or sink with in all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 32mm (Thirty two millimetre) nominal size diameter rubber plug for wash basin, sink including carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 32mm (Thirty two millimetre) nominal size diameters M.I. union ISI marked including carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 32mm (Thirty millimetre) diametre PVC Waste pipe for wash basin or sink including brass check net with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 100mm (One hundred milimetre) nominal size diameters CP grating of continental series of Jaquar/ classic series of Hindware / Floral series of cera / vintage series of kerovite for nalhni trap of approved shade complete, within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing C.P. (Chromium Plated) jet sprey of continental series/clasic series/floral series of Jaquar/ Hindware/ Cera for Europen seat of approved quality and colour with 1.5m (One decimal five metre) tube including carriage of material within all leads, lifts and other incidentals as per specifcations, approved drawing as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 600mmx450mm (six hundred millimetre into four hundred fifty millimetre) beveled edge mirror of superior glass 6mm (six millimetre) thick of Modiguard/ Atul/ Golden Fish mounted on 6mm (six millimetre) thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. screws and washers including entire carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing C.P. brass towel rail size 600x20mm (Six hundred into twenty millimetre) of continental series of Jaquar/Classic of Hindware/ floral series of Cera/Hindon series of Jal with C.P. brass brackets fixed to wooden plugs with C.P. brass screws including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing as per as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 160mm (One hundred sixty millimetre) chromium plated brass soap dish of continental series of Jaquar/ Classic series of Hindware/ Floral series of Cera/ Hindon series of Jal with C.P. brass brackets fixed with cleats C.P. brass screws including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 15mm (Fifteen milimetre) diameters C.P. brass bib tap of continental series of Jaquar/ Classic series of Hindware/ Floral series of Cera/ Hindon series of Jal/ Vintage series of Kerovite as per specifications including carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing consealed C.P. brass stop cock of continental series of Jaquar/ Classic series of Hindware/ Floral series of Cera/ Hindon series of Jal vintage series of kerovite(heavy duty makes ISI marked 15mm (Fifteen millimetre) as per specifications including entire carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing C.P. brass pillar tap of Continental/Classic/ Floral series of Jaquar/Hindware/Cera 15mm (fifteen millimetre) dia (Heavy duty makes ISI marked No. 8931 & 8934) as per specifications including entire carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing PVC connection pipe brass union 450 mm length 15mm dia ISI marked including fitting within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and placing water tank of PVC (Poly venyl chloride) of Sintex/Supreme/Finolex (Triple layer) ISI marked having capacity 1000 ( One thousand) litres each with necessary fitting including over flow pipes, scour pipe, ball valve and cover with locking arrangement of good quality including providing pads of sizes as required good quality all complete as per specifications including entire carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Making connection of galvanised mild steel distribution branch with galvanised mild steel main 20mm (Twenty millimetre) including carraige of material within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing polythene aluminium polythene ( PE-AL-PE) composite pressure pipe U.V. stabilized with carbon of KITEC confirming to IS 15450-2004 for water supply including clamps at one meter spacing, cutting fixing and making good the wall etcetra but excluding the cost of fittings for (internal work) pipe exposed on wall complete including entire carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 20 mm (Twenty millimetre) nominal bore to wall ceiling and floor galvanised mild steel tubes of TATA steel/jindal (Hissar) (Medium grade) tube in trenches fittings and clamps including making good the wall, ceiling and floor including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing 15 mm (Fifteen millimetre) nominal bore to wall ceiling and floor galvanised mild steel tubes of TATA steel/jindal (Hissar) (Medium grade) tube fittings and clamps including making good the wall, ceiling and floor including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing high pressure P.V.C spigot and socket soil, waste and ventilating pipe of Supreme/Finolex/Prince/ Relpipe (Reliance) working pressure not less than 6.0 kg/cm2 (Six kilogram per square centimetre) I.S.I Marked including fixing with approved adhesive etcetra complete including carriage of material within all leads, lifts and other incidentals. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

75 mm (Seventy five millimetre) diametre

110 mm (One hundred ten millimetre) diametre

150 mm (One hundred fifty millimetre) diametre

Providing and fixing PVC single Equal Branch with oval access door ISI Marked of Supreme/ Finolex/ Prince/ Relpipe (Reliance) with insertion rubber washer 3 mm (Three millimetre) thick bolt and nuts including fixing with approved adhesive and carraige of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

75 mm ( Seventy five millimetre) diametre

110 mm ( One hundred ten millimetre) diametre

150 mm ( One hundred ten millimetre) diametre

Providing and fixing composit end seal compression fitting as per IS-15450-2004 for water supply including Tee, Elbows, reducers/ connectors couplers and clamps with jointing, testing and fitting complete including cutting and making good the walls etcetra complete including entire carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Equal Tee (1620)

Elbow (1620x20mm)

Male thread connector (1620x20 mm)

Female thread connector (1620x20 mm)

Equal Tee (2025)

Elbow (2025x25mm)

Male thread connector (2025x25mm)

Female thread connector (2025x25mm)

Coupler (1620)

Reducer (1620x2025)

Providing and fixing PVC Clamps ISI Marked of approved design fixed with steel screws and rawal plug etcetra complete within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

110 mm ( One hundred ten millimetre) diametre

75 mm ( Seventy five millimetre) diametre

Providing and fixing 110 mm ( One hundred ten millimetre) PVC Collar ISI Marked including fixing with approved adhesive etcetera complete within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing Viterous china urinal large flat back No 60002 size (39x37.50x59 cm) (thirty nine into thirty seven point five into fifty nine centimetre) of Hindware/ Cera/ Jaquar of Star white/ snow white shade including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp ( waste pipe to be measured and Paid for separately) including carriage of material within all leads, lifts of material and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing Division Plate for urinals 600x300 mm ( Six hundred into three hundred millimetre) of viterous china of Jaquar/ Hindware/ Cera including carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 5.00 (Five) litres capacity P.V.C low level dual flushing cistern (Sleek plus) of Cera/Hindware/Jaquar with a pair of G.I.or mild steel brackets complete with fittings including PVC syphonic appratus, mosquito proof lid of PVC, union and coupling for connection with intet, outlet and over flow pipe including cutting holes and making good the same and connection the flush board with cistern and closet (over flow pipe to be measured and paid for separately) including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing heavy quality stainless steel kitchen sink of size 610x460mm (Six hundred ten into four hundred sixty millimetre) of approved standard ISI marked with drain board of Diamond/ Unik with C.P. waste pipe, C.I. or M.S. brackets painted white including cutting holes and making good the same with bowl depth 200 mm ( two hundred millimetre) including entire carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing PVC Floor Trapof size 110x75 mm (one hundred ten into seventy five millimetre) ISI marked of self cleaning design including fixing with approved adhesive cost of cutting and making good the wall and floor complete within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Construction of manhole with R.C.C. top slab in 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty milimetres nominal size), foundation concrete 1:4:8 (One cement: Four sand: Eight graded crushed stone aggregate 40mm(Forty milimetres nominal size) inside plastering 15mm (Fifteen milimetres) thick with cement mortar 1:3 (One Cement: three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty milimetre nominal size) finished smooth complete including curing and testing inside size 800x800mm (Eight hundred into Eight hundred milimetres) 500mm(Five hundred milimetre) deep, including C.I. cover with frame (light duty single seal pattern–I) 450x610mm (Four hundred fifty into six hundred ten milimetre) internal dimensions total weight of cover and frame to be not less than 38 Kgs (Thirty eight kilogram) weight of cover 23Kg (twenty three kilogram) and weight of frame 15 Kg (Fifteen kilogram) with 300mm (Two hundred milimetre) thick walls of brick masonry in cement mortar 1:3 (one cement: three sand) within all leads, lifts and other incidentals, as per specifications approved drwaing, design, the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Constructing brick masonry chamber for under ground CI inspection chamber and bends with common burnt clay building bricks in cement mortar 1:5 (one cement isto five sand) cover with frame (light duty) 355mmx6mm (Three hundred fifty five into six millimetre) internal dimensions total weight of cover with frame to be not less then 38Kg. (weight of cover 23Kg (Twenty three Kilogram) and weight of frame 15Kg) RCC top slab with 1:2:4 (one cement isto two sand isto four graded stone aggregate 20mm nominal size) foundation concrete 1:5:10 (one cement isto five sand isto ten graded stone aggregate 40mm nominal size) in side plaster 15mm thick with cement mortar 1:3 (one cement isto three sand) finished smooth with floating coat of neat cement on wall and bed concrete etcetera complete. Inside dimension 455x610x450mm (Four hundred fifty five into six hundrred ten into four hundred fifty) deep single pipe line including cost and carriage within all leads, lifts and other incidentals as per PWD specification, drawing , design and entire satisfaction/direction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Construction manhole with R.C.C. top slab in 1:2:4 (One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty millimetre nominal size), foundation concrete 1:4:8 (One cement: Four sand: Eight graded crushed stone aggregate 40mm (Forty milimetre nominal size) inside plastering 15mm (Fifteen millimetre) thick with cement mortar 1:3 (One Cement: three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (One cement isto Two sand isto Four graded crushed stone aggregate 20mm(Twenty milimetre nominal size) finished smooth complete including curing and testing inside size 800x800mm (Eight hundred into Eight hundred millimetre) 1000mm(One thousand millimetre) deep, including C.I. cover with frame (light duty single seal pattern–I) 450x610mm (Four hundred fifty into six hundred and ten milimetres) internal dimensions total weight of cover and frame to be not less than 38 Kg (Thirty eight kilogram) weight of cover 23Kg (twenty three kilogram) and weight of frame 15 Kg (Fifteen kilogram) with 200mm (Two hundred milimetre) thick walls of brick masonry in cement mortar 1:3 (one cement isto three sand) within all leads, lifts of materials and other incidentals, as per specification, approved drawing, design and the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing C.P. Grab bar of continental series of Jaquar/ classic series of Hindware/ floral series of Cera/ unitage series of kerovite/ Hindon series of Jal including entire carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 15mm (fifteen millimetre) C.P. Brass Angle valve of Continental Series of Jaquar/ classic series of Hindware /Vintage series of Kerovite/ Hindon series of Jal/ Floral series of cera as per specifications with nuts & bolts including carriage of material within all leads, lifts, and other incidentals. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing brass ball valve ( Horizontal plunger type) high pressure with copper float 25mm (Twenty five millimetre) nominal bore ISI marked including carriage of material within all leads and lifts and other incidentals, as per specifications the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing 455x610mm (four hundred fifty five into six hundred ten millimetre) light duty rectangular C.I. manhole cover with frame weight 38KG (thirty eight kilogram) light (single seal duly pattern) including entire carriage of material within all leads, lifts and other incidental, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing & Fixing water lifting pump (Tulu pump) of Havells / Usha / Crompton / Kirloskar 1.00 H.P centrifugal head range 6 - 25 (Six to Twenty five) meter and 20mm (Twenty millimetre) nominal bore including making necessary connection, fittings, accessories as required and carraige of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Kumar Associates