Beautification of Subhash Park at Ward 03 Transit Camp in Rudrapur under Devbhoomi rajat jaynti

Select, Excess (+), Less (-) Less (-)

Tender Inviting Authority: Municipal Commissioner, Nagar Nigam Rudrapur

Name of Work: nsoHkwfe jtr t;arh ds vUrxZr okMZ u0 &3] VªkaftV dSEi] #æiqj esa lqHkk"k ikdZ dk lkSUn;hZdj.k

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Item Description (DSR item) Item Code / Make Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

1 Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.All kinds of soil BI01010001010000000000000515BI0100001113 0.000 SQM Excess(+) Full Conversion INR

2 Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation et BI01010001010000000000000515BI0100001114 0.200 Cum Excess(+) Full Conversion INR

3 Earthwork means(Hydraulic excavator)/manual means over areas ( exceeding 30cm in depth,1.5m in width as well as 10sqm on plan) i/c disposal of excavated earth, lead up to 50m and lift up to 1.5m, disposed earth to be levelled and neatly dressed. : Excavation in all kinds of soil.All kinds of soil in excavation by mechanical BI01010001010000000000000515BI0100001115 0.000 CUM Excess(+) Full Conversion INR

4 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. BI01010001010000000000000515BI0100001116 0.000 CUM Excess(+) Full Conversion INR

5 Filling with available fly ash and earth (excluding rock) in trenches or embankment in layers (each layer should not exceed 15 cm), with intermediate layer of compacted earth (Soil density of 98%) after every four layers of compacted depth of fly ash, sides & top layer of filling shall be done with earth having total minimum compacted thickness 30 cm or as decided by Engineer -in-charge, including compacting each layer by rolling/ ramming and watering, all complete as per drawing and irection of Engineer -in - charge. BI01010001010000000000000515BI0100001117 0.000 CUM Excess(+) Full Conversion INR

6 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. BI01010001010000000000000515BI0100001118 0.000 CUM Excess(+) Full Conversion INR

7 Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, BI01010001010000000000000515BI0100001119 0.199 cum Excess(+) Full Conversion INR

8 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. BI01010001010000000000000515BI0100001120 0.000 Cum Excess(+) Full Conversion INR

9 Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor with Chlorpyriphos/ L BI01010001010000000000000515BI0100001121 0.200 SQM Excess(+) Full Conversion INR

10 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : BI01010001010000000000000515BI0100001122 0.799 CUM Excess(+) Full Conversion INR

11 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. BI01010001010000000000000515BI0100001123 0.999 Sqm Excess(+) Full Conversion INR

12 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - -All work upto plinth level. 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size) BI01010001010000000000000515BI0100001124 0.000 Cum Excess(+) Full Conversion INR

13 1:1½:3 (1 Cement: 1½ coarse sand (zone-Ill) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). BI01010001010000000000000515BI0100001125 0.999 CUM Excess(+) Full Conversion INR

14 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 sq.m cement :3 coarse sand : 6graded stone aggregate 20mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth BI01010001010000000000000515BI0100001126 0.000 SQM Excess(+) Full Conversion INR

15 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregat BI01010001010000000000000515BI0100001127 0.000 CUM Excess(+) Full Conversion INR

16 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of BI01010001010000000000000515BI0100001128 0.999 CUM Excess(+) Full Conversion INR

17 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. BI01010001010000000000000515BI0100001129 0.800 KG Excess(+) Full Conversion INR

18.1 Centering and shuttering including strutting, propping etc. and removal of form for :Foundations, footings, bases of columns, etc. for mass concrete BI01010001010000000000000515BI0100001131 0.000 SQM Excess(+) Full Conversion INR

18.2 Centering and shuttering including strutting, propping etc. and removal of form for :Columns, Pillars, Piers, Abutments, Posts and Struts BI01010001010000000000000515BI0100001132 0.399 SQM Excess(+) Full Conversion INR

18.3 Centering and shuttering including strutting, propping etc. and removal of form for :Lintels, beams, plinth beams, girders, bressumers and cantilevers BI01010001010000000000000515BI0100001133 0.400 SQM Excess(+) Full Conversion INR

18.4 Centering and shuttering including strutting, propping etc. and removal of form for :Suspended floors, roofs, landings, balconies and access platform with water proof ply 1 2 mm thick BI01010001010000000000000515BI0100001134 0.000 SQM Excess(+) Full Conversion INR

18.5 Centering and shuttering including strutting, propping etc. and removal of form for :Suspended floors, roofs, landings, balconies and access platform BI01010001010000000000000515BI0100001135 0.200 SQM Excess(+) Full Conversion INR

19 Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: Cement Mortar 1:6 (1 cement: 6 coarse sand). BI01010001010000000000000515BI0100001136 0.000 Cum Excess(+) Full Conversion INR

20 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth i n : Cement mortar 1 : 4 (1 cement: 4 coarse sand) BI01010001010000000000000515BI0100001137 0.000 CUM Excess(+) Full Conversion INR

21 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) BI01010001010000000000000515BI0100001138 0.000 CUM Excess(+) Full Conversion INR

22 Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement: 6 coarse sand): BI01010001010000000000000515BI0100001139 0.999 CUM Excess(+) Full Conversion INR

23 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) super structure BI01010001010000000000000515BI0100001140 0.000 CUM Excess(+) Full Conversion INR

24 Extra for providing and placing in position 2 Nos. 6mm dia. M.S.bars at every third course of half brick masonry (with F.P.S.bricks). BI01010001010000000000000515BI0100001141 0.000 SQM Excess(+) Full Conversion INR

25 12mm thick plaster on the plain in side of mix 1:6 ( 1 cement : 6 fine sand) mortar BI01010001010000000000000515BI0100001142 0.999 SQM Excess(+) Full Conversion INR

26 15 mm cement plaster of mix 1:4 (1 cement : 4 fine sand) BI01010001010000000000000515BI0100001143 0.199 SQM Excess(+) Full Conversion INR

27 15mm thick plaster on the plain in side of mix 1:6 ( 1 cement : 6 fine sand) mortar BI01010001010000000000000515BI0100001144 0.000 SQM Excess(+) Full Conversion INR

28 6mm thick cement plaster of ceiling of mix 1:3 ( 1 cement : 3 fine sand) mortar BI01010001010000000000000515BI0100001145 0.000 SQM Excess(+) Full Conversion INR

29 8.14 Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) : BI01010001010000000000000515BI0100001146 0.000 SQM Excess(+) Full Conversion INR

30 Steel work welded in built up sections/ framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works BI01010001010000000000000515BI0100001147 0.799 KG Excess(+) Full Conversion INR

31 Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel Work BI01010001010000000000000515BI0100001148 0.600 SQM Excess(+) Full Conversion INR

32 Painting with aluminium paint of approved brand and manufacture to give an even shade Two or more coats on new work BI01010001010000000000000515BI0100001149 0.999 SQM Excess(+) Full Conversion INR

33 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. BI01010001010000000000000515BI0100001150 0.000 SQM Excess(+) Full Conversion INR

34 Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. BI01010001010000000000000515BI0100001151 0.999 M Excess(+) Full Conversion INR

35 Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement: 6 coarse sand) BI01010001010000000000000515BI0100001152 0.000 Cum Excess(+) Full Conversion INR

36 Random rubble masonry with hard stone in uperstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like. BI01010001010000000000000515BI0100001153 0.000 Cum Excess(+) Full Conversion INR

37 Providing at all heights, levels and locations Aluminium profile industrial troughed sheet of Alloy 31500/31000/40800, conforming to IS 1254, IS 737, IS 2676. The sheet shall be fixed using self drilling/self tapping SS screws of size 5.5x65 mm with EPDM seal complete upto required pitch in horizontal, vertical or curved surfaces including cutting to size and shape where required as per specifications, detail drawings and direction of Engineer-in-Charge. The rate shall be inclusive of all screws, seal, ridge, labour, scaffolding, machinery for fixing and approved sealent where required etc. but excluding the cost of purlins, rafters and trusses. BI01010001010000000000000515BI0100001154 0.000 SQM Excess(+) Full Conversion INR

38 Gravel/Soil Aggregate Base/Subbase Nominal Maximum size Grading 80 mm (Table 2.3 of IRC SP 77-2008) Construction of Gravel/ Soil Aggregate Subbase/ Base by providing well graded material of nominal maximum size grading 80 mm as per Table 2.3 of IRC SP 77- 2008, spreading in uniform layers with tractor mount appropriate grading arrangements on prepared surface, mixing by mix in place method at OMC with tractor mount appropriate rotavator attachment and compaction with three wheel 80- 100 kN Static Roller capacity to achieve the desired density complete as per specifications contained in Para 2.2, 3.6 and 3.7 of IRC SP 772008. BI01010001010000000000000515BI0100001155 0.999 CUM Excess(+) Full Conversion INR

39 Wet Mix Macadam Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406 (By Mechanical Means with 1 km lead) BI01010001010000000000000515BI0100001156 0.000 Cum Excess(+) Full Conversion INR

40 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishin BI01010001010000000000000515BI0100001157 0.000 SQM Excess(+) Full Conversion INR

41 Providing and laying in position ready mixed or site batched design mix cement concrete for plain cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/ Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate I retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering and finishing as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the minimum specified cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. BI01010001010000000000000515BI0100001158 0.999 CUM Excess(+) Full Conversion INR

42 All works above plinth and upto floor V level Concrete of M20 grade with minimum cement content of 270 kg /cum BI01010001010000000000000515BI0100001159 0.000 CUM Excess(+) Full Conversion INR

43 Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately).All works upto plinth level BI01010001010000000000000515BI0100001160 0.000 Cum Excess(+) Full Conversion INR

44 All works above plinth level upto floor V level Concrete of M25 grade with minimum cement content of 330 kg /cum BI01010001010000000000000515BI0100001161 0.999 Cum Excess(+) Full Conversion INR

45 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:.3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. BI01010001010000000000000515BI0100001162 0.999 SQM Excess(+) Full Conversion INR

46 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete BI01010001010000000000000515BI0100001163 0.000 SQM Excess(+) Full Conversion INR

47 Marble stone flooring with 1 8 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1 : 4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with :Raj Nagar plain BI01010001010000000000000515BI0100001164 0.999 SQM Excess(+) Full Conversion INR

48 Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. BI01010001010000000000000515BI0100001165 0.000 RMT Excess(+) Full Conversion INR

49 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surfaceto prepare the surface even and smooth complete. BI01010001010000000000000515BI0100001166 0.600 SQM Excess(+) Full Conversion INR

50 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) BI01010001010000000000000515BI0100001167 0.399 SQM Excess(+) Full Conversion INR

51 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture BI01010001010000000000000515BI0100001168 0.599 SQM Excess(+) Full Conversion INR

52 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1: BI01010001010000000000000515BI0100001169 0.000 CUM Excess(+) Full Conversion INR

53 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws BI01010001010000000000000515BI0100001170 0.000 SQM Excess(+) Full Conversion INR

54 Providing/fixing M.S. grills of required pattern in frames of windows etc. with M.S. flat, square or round bars etc. all complete BI01010001010000000000000515BI0100001171 0.999 KG Excess(+) Full Conversion INR

55 Providing & fixing of wire mesh (mosquito jalli) with labour & material comlete BI01010001010000000000000515BI0100001172 0.000 SQM Excess(+) Full Conversion INR

56 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. BI01010001010000000000000515BI0100001173 0.000 NOS Excess(+) Full Conversion INR

57 Providing and fixing chromium plated brass handles with necessary screws etc. complete: BI01010001010000000000000515BI0100001174 0.000 NOS Excess(+) Full Conversion INR

58 Providing and fixing aluminium sliding door bolts, ISI marked anodised(anodic coating not less than grade AC 10 as per IS : 1868),transparent or dyed to required colour or shade, with nuts and screws etc. complete BI01010001010000000000000515BI0100001175 0.000 NOS Excess(+) Full Conversion INR

59 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete BI01010001010000000000000515BI0100001176 0.000 NOS Excess(+) Full Conversion INR

60 Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. BI01010001010000000000000515BI0100001177 0.000 NOS Excess(+) Full Conversion INR

61 Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms. BI01010001010000000000000515BI0100001178 0.000 NOS Excess(+) Full Conversion INR

62 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). BI01010001010000000000000515BI0100001179 0.999 KG Excess(+) Full Conversion INR

63 Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in charge:Profile B Fixing with adjustable BI01010001010000000000000515BI0100001180 0.999 RMT Excess(+) Full Conversion INR

64 Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strikeplate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineerin-charge:(profile c) BI01010001010000000000000515BI0100001181 0.999 RMT Excess(+) Full Conversion INR

65 Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with BI01010001010000000000000515BI0100001182 0.000 SQM Excess(+) Full Conversion INR

66 P/F 1st quality ceramic glazed wall tiles conforming to IS : 15622 of approved make in colours , shades except burgandy , bottel green , black of any sizes as approved by Engineer -in -Charge in skirting , risers of steps and dados over 12 mm thick bed of cement mortar 1:3 and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. BI01010001010000000000000515BI0100001183 0.999 SQM Excess(+) Full Conversion INR

67 Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : BI01010001010000000000000515BI0100001184 0.999 SQM Excess(+) Full Conversion INR

68 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conformingto IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete BI01010001010000000000000515BI0100001185 0.000 SQM Excess(+) Full Conversion INR

69 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1 : 4 (1 cement: 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. BI01010001010000000000000515BI0100001186 0.999 SQM Excess(+) Full Conversion INR

70 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade BI01010001010000000000000515BI0100001187 0.999 SQM Excess(+) Full Conversion INR

71 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) BI01010001010000000000000515BI0100001188 0.000 SQM Excess(+) Full Conversion INR

72 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two or more coats on new work over an under coat of suitable sq.m shade with ordinary paint of approved brand and manufacture. BI01010001010000000000000515BI0100001189 0.999 SQM Excess(+) Full Conversion INR

73 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. BI01010001010000000000000515BI0100001190 0.999 SQM Excess(+) Full Conversion INR

74 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed BI01010001010000000000000515BI0100001191 0.000 SQM Excess(+) Full Conversion INR

75 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase BI01010001010000000000000515BI0100001192 0.000 M Excess(+) Full Conversion INR

76 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. BI01010001010000000000000515BI0100001193 0.000 NOS Excess(+) Full Conversion INR

77 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. BI01010001010000000000000515BI0100001194 0.999 M Excess(+) Full Conversion INR

78.1 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Coupler 110 mm BI01010001010000000000000515BI0100001196 0.000 EACH Excess(+) Full Conversion INR

78.2 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5° 110 mm BI01010001010000000000000515BI0100001197 0.000 EACH Excess(+) Full Conversion INR

78.3 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Shoe (Plain) 110 mm BI01010001010000000000000515BI0100001198 0.000 EACH Excess(+) Full Conversion INR

79 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete BI01010001010000000000000515BI0100001199 0.000 EACH Excess(+) Full Conversion INR

80 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: BI01010001010000000000000515BI0100001200 0.000 EACH Excess(+) Full Conversion INR

81 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : BI01010001010000000000000515BI0100001201 0.000 EACH Excess(+) Full Conversion INR

82 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern. BI01010001010000000000000515BI0100001202 0.000 EACH Excess(+) Full Conversion INR

83 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: BI01010001010000000000000515BI0100001203 0.000 EACH Excess(+) Full Conversion INR

84 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. BI01010001010000000000000515BI0100001204 0.000 MTR Excess(+) Full Conversion INR

85.1 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 75 mm BI01010001010000000000000515BI0100001206 0.000 EACH Excess(+) Full Conversion INR

85.2 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 110 mm BI01010001010000000000000515BI0100001207 0.000 EACH Excess(+) Full Conversion INR

85.3 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 75 mm BI01010001010000000000000515BI0100001208 0.000 EACH Excess(+) Full Conversion INR

85.4 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.110 mm BI01010001010000000000000515BI0100001209 0.000 EACH Excess(+) Full Conversion INR

85.5 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.75 mm BI01010001010000000000000515BI0100001210 0.000 EACH Excess(+) Full Conversion INR

85.6 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.110 mm BI01010001010000000000000515BI0100001211 0.000 EACH Excess(+) Full Conversion INR

86.1 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete 75 mm BI01010001010000000000000515BI0100001213 0.000 EACH Excess(+) Full Conversion INR

86.2 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete 110 mm BI01010001010000000000000515BI0100001214 0.000 EACH Excess(+) Full Conversion INR

87 Providing and fixing 600 x 455 mm. bevelled edge mirror of Saint Gobin or Modi float glass complete with 6 mm. thick hard board ground fix to wooden cleats with CP brass screws and washers etc. complete. BI01010001010000000000000515BI0100001215 0.000 EACH Excess(+) Full Conversion INR

88.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge Internal work - Exposed on wall 15mm dia nominal bore BI01010001010000000000000515BI0100001217 0.000 M Excess(+) Full Conversion INR

88.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge Internal work - Exposed on wall 25 mm dia. nominal bore BI01010001010000000000000515BI0100001218 0.000 M Excess(+) Full Conversion INR

88.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge Internal work - Exposed on wall 50 mm dia. nominal bore BI01010001010000000000000515BI0100001219 0.000 M Excess(+) Full Conversion INR

89 Providing and fixing ball valve (brass) of approved quality complete BI01010001010000000000000515BI0100001220 0.000 EACH Excess(+) Full Conversion INR

90 Providing and fixing gun metal non- return valve of approved quality (screwed end) : BI01010001010000000000000515BI0100001221 0.000 EACH Excess(+) Full Conversion INR

91 Providing and fixing uplasticised PVC connection pipe with brass unions : BI01010001010000000000000515BI0100001222 0.000 EACH Excess(+) Full Conversion INR

92 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. BI01010001010000000000000515BI0100001223 0.000 LT Excess(+) Full Conversion INR

93 Providing & Fixing C.P. brass bib cock parryware make BI01010001010000000000000515BI0100001224 0.000 EACH Excess(+) Full Conversion INR

94 Providing & Fixing C.P. brass Long boddy bib cock BI01010001010000000000000515BI0100001225 0.000 EACH Excess(+) Full Conversion INR

95 Providing and fixing PTMT pillar cock of approved quality and colour BI01010001010000000000000515BI0100001226 0.000 EACH Excess(+) Full Conversion INR

96 Providing & Fixing C.P. brass stop(conceald) BI01010001010000000000000515BI0100001227 0.000 EACH Excess(+) Full Conversion INR

97 Providing & fixing c.p. soap dish parryware make BI01010001010000000000000515BI0100001228 0.000 EACH Excess(+) Full Conversion INR

98 Provding & Fixing C.P Towel rail parryware make BI01010001010000000000000515BI0100001229 0.000 EACH Excess(+) Full Conversion INR

99 Provisiding & Fixing C.P Paper Holder parryware Make BI01010001010000000000000515BI0100001230 0.000 EACH Excess(+) Full Conversion INR

100 Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6 mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthned clear float glass 6 mm thick, spacer tube 12 mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineerin- Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. BI01010001010000000000000515BI0100001231 0.799 SQM Excess(+) Full Conversion INR

101 Providing at all heights, levels and locations Aluminium profile industrial troughed sheet of Alloy 31500/31000/40800, conforming to IS 1254, IS 737, IS 2676. The sheet shall be fixed using self drilling/self tapping SS screws of size 5.5x65 mm with EPDM seal complete upto required pitch in horizontal, vertical or curved surfaces including cutting to size and shape where required as per specifications, detail drawings and direction of Engineer-in-Charge. The rate shall be inclusive of all screws, seal, ridge, labour, scaffolding, machinery for fixing and approved sealent where required etc. but excluding the cost of purlins, rafters and trusses. BI01010001010000000000000515BI0100001232 0.000 SQM Excess(+) Full Conversion INR

102 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surfaceto prepare the surface even and smooth complete. BI01010001010000000000000515BI0100001233 0.600 SQM Excess(+) Full Conversion INR

103 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) BI01010001010000000000000515BI0100001234 0.000 SQM Excess(+) Full Conversion INR

104 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group B BI01010001010000000000000515BI0100001235 0.000 Each Excess(+) Full Conversion INR

105 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. BI01010001010000000000000515BI0100001236 0.000 Each Excess(+) Full Conversion INR

106.1 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire BI01010001010000000000000515BI0100001238 0.000 Metre Excess(+) Full Conversion INR

106.2 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire BI01010001010000000000000515BI0100001239 0.000 Metre Excess(+) Full Conversion INR

106.3 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire BI01010001010000000000000515BI0100001240 0.000 Metre Excess(+) Full Conversion INR

106.4 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.4 X 4 sq. mm + 2 X 4 sq. mm earth wire BI01010001010000000000000515BI0100001241 0.000 Metre Excess(+) Full Conversion INR

107 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 amps modular switch, connection etc. as required. BI01010001010000000000000515BI0100001242 0.000 Each Excess(+) Full Conversion INR

108 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required BI01010001010000000000000515BI0100001243 0.000 Each Excess(+) Full Conversion INR

109 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required BI01010001010000000000000515BI0100001244 0.000 Each Excess(+) Full Conversion INR

110 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 25 sq. mm (28mm) BI01010001010000000000000515BI0100001245 0.000 Mtr Excess(+) Full Conversion INR

111 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. BI01010001010000000000000515BI0100001246 0.000 Each Excess(+) Full Conversion INR

112 Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) BI01010001010000000000000515BI0100001247 0.000 Mtr Excess(+) Full Conversion INR

113 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. BI01010001010000000000000515BI0100001248 0.000 Each Excess(+) Full Conversion INR

114 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. BI01010001010000000000000515BI0100001249 0.000 Each Excess(+) Full Conversion INR

115 Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB),having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. As required. 40 A BI01010001010000000000000515BI0100001250 0.000 Each Excess(+) Full Conversion INR

116 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 4 way (4 + 12), Double door BI01010001010000000000000515BI0100001251 0.000 Each Excess(+) Full Conversion INR

117 S/F of hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16SWGM.S. sheet incorporating 10mm dia, M.S. round barduly bent for supporting fan hanger dully painted withred oxide and screwing arrangement with wiring conduit laid in the R.C.C. roof before concreting along with supply of all materials, labour T & P etc., for proper completion of work. BI01010001010000000000000515BI0100001252 0.000 Each Excess(+) Full Conversion INR

118 Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete. BI01010001010000000000000515BI0100001253 0.000 Each Excess(+) Full Conversion INR

119 Grassing with Natural Korean grass cover as per Quotation BI01010001010000000000000515BI0100001254 0.000 SQFT Excess(+) Full Conversion INR

120 Supply and Fixing of Outdoor Rectangular Acrylic Letter Boards BI01010001010000000000000515BI0100001255 0.999 SQFT Excess(+) Full Conversion INR

121 Mild Steel Animal Topiary Frame, For Garden Art BI01010001010000000000000515BI0100001256 0.000 NOS Excess(+) Full Conversion INR

122 Supply and Fixing of Pillar Taps BI01010001010000000000000515BI0100001257 0.000 NOS Excess(+) Full Conversion INR

123 Supply and Fixing of Ceramic White LED BOLLARD LIGHT BI01010001010000000000000515BI0100001258 0.000 NOS Excess(+) Full Conversion INR

124 Supply and Fixing of RAICHURA ENERGY 6 30 Watt White LED type BI01010001010000000000000515BI0100001259 0.000 NOS Excess(+) Full Conversion INR

125 Supply and Fixing of Musical Water Fountain as per Engineer-in-charge BI01010001010000000000000515BI0100001260 0.000 NOS Excess(+) Full Conversion INR

126 Providing and fixing of CGEPL HDPE Waste Containers and Accessories - Domestic (Version 2) 100 ltr Capacity Capacity complete in all aspects as per directions of Engineer-in-Charge BI01010001010000000000000515BI0100001261 0.000 NOS Excess(+) Full Conversion INR

127 PlantationofTrees,Shrubs,and Hedge atsitei/cwatering and removal of unserveiceable material’sasper direction of officer in charge Tree Plants BI01010001010000000000000515BI0100001262 0.000 NOS Excess(+) Full Conversion INR

128 PlantationofTrees,Shrubs,and Hedge atsitei/cwatering andr emoval of unserveiceable material’sasper direction of officer in charge Shrubs Plants BI01010001010000000000000515BI0100001263 0.000 NOS Excess(+) Full Conversion INR

129 PlantationofTrees,Shrubs,andHedge atsitei/cwatering and removal of unserveiceable material’sasper direction of officer in charge Plants BI01010001010000000000000515BI0100001264 0.000 NOS Excess(+) Full Conversion INR

130 Providing and fixing of EPDM Track Flooring complete in all aspects as per directions of Engineer-in-Charge BI01010001010000000000000515BI0100001265 0.800 sqft Excess(+) Full Conversion INR

131 Supply and Fixing of FRP 25 years Topiary Staue as per the direction of Enginner-in-charge BI01010001010000000000000515BI0100001266 0.000 NOS Excess(+) Full Conversion INR

132 Wall Art Painting BI01010001010000000000000515BI0100001267 0.000 SQFT Excess(+) Full Conversion INR

133 Providing and fixing of V2MS Garden Swing with seat without roof 2 - seater complete in all aspects as per directions of Engineer-in-Charge BI01010001010000000000000515BI0100001268 0.000 NOS Excess(+) Full Conversion INR

134 Providing and fixing of Unbranded Outdoor Slide with Straight design surface made of FRP Material complete in all aspects as per directions of Engineer BI01010001010000000000000515BI0100001269 0.000 NOS Excess(+) Full Conversion INR

135 Providing and fixing of Fun PLay 750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm Parallel Bar - Outdoor Gym Equipment complete in all aspects as per directions of Engineer-in-Charge BI01010001010000000000000515BI0100001270 0.000 NOS Excess(+) Full Conversion INR

136 Providing and fixing of EPDM Track Flooring complete in all aspects as per directions of Engineer-in-Charge BI01010001010000000000000515BI0100001271 0.999 SQFT Excess(+) Full Conversion INR

137 Supply and placing of Sculpture Finished Animal Statue MONKEY BI01010001010000000000000515BI0100001272 0.000 NOS Excess(+) Full Conversion INR

138 Supply and placing of Sculpture Finished Animal Statue HORSE BI01010001010000000000000515BI0100001273 0.000 NOS Excess(+) Full Conversion INR

139 Supply and placing of Sculpture Finished Animal Statue GIRRAF BI01010001010000000000000515BI0100001274 0.000 NOS Excess(+) Full Conversion INR

140 Supply and Fixing of Ozean Reverse Osmosis based Point of Use Water Treatment System for Drinking Purposes (V3) as per IS 16240 Countertop/Wall Mount 30 and above ABS/PP Food Grade 12 Liters and above BI01010001010000000000000515BI0100001275 0.000 NOS Excess(+) Full Conversion INR

141 Supply and Fixing of FRESHQO Storage Type Water Cooler 40 LPH Cooling Capacity BI01010001010000000000000515BI0100001276 0.000 NOS Excess(+) Full Conversion INR

142 Supply & fixing of 12 Watt LED Bulb - B22 / E27 (Colour Temp.- 6500K / Lumens - 900 lm) cool day light, Input Volts (AC 90V-260V), 3-Star rating suitable for Batten/Angle holder including making connection.Complete in all respect. BI01010001010000000000000515BI0100001277 0.000 Each Excess(+) Full Conversion INR

143 Supply & fixing of 225/230mm sweep ventilating (Light Duty) exhaust fan complete with Metallic Blade (Steel bird guard protector /Copper motor for high air suction performance /Capacitor etc.), Noise level : (45 - 50) dB, Power consumption : 45 W, Rated voltage : 230 V, Rated frequency : 50 Hz, Motor type : Normal Speed. Complete in all respect. BI01010001010000000000000515BI0100001278 0.000 Each Excess(+) Full Conversion INR

144 Supply and fixing of LED Tube Light with Metal heavy duty Box type batten Light fitting 1X22 watt suitable for upto 1X22 watt LED Polycarbonate tube light complete Including tube suitable for both surface & suspended complete in all respect. BI01010001010000000000000515BI0100001279 0.000 Nos Excess(+) Full Conversion INR

145 Supply and fixing of pendent mounting having 1'x4' size 36 to 46 watt seamlessly intergrateds LED luminier with acrylivc sheet diffuser and intergral electronic driver complete in all respects. BI01010001010000000000000515BI0100001280 0.000 Nos Excess(+) Full Conversion INR

146 Supply and fixing of water tight oblong 10 Watt LED bulk head luminaire having die cast housing with driver set confirming to IP 65 and above Protection.Complete in all respect. CAT. - AAA BI01010001010000000000000515BI0100001281 0.000 Nos Excess(+) Full Conversion INR

147 Supply and fixing of 20watt LED fitting Confirming to IP 65 and above protection Complete in all respect. CAT. - AAA (Use as a Decorative Mirror Light) BI01010001010000000000000515BI0100001282 0.000 Nos Excess(+) Full Conversion INR

148 Supply of ceilling fans with fan motor of A.C. Permanent insulation, capacitor rating conforming BEE 5 Star rating and IS:374/79 and also comply with IS:1709/1984 with latest amendment. The rated voltage 220/240 volts,50 Hz, 1-Ph AC the fan assemble should consists of down rod blades, shackle canopies etc and with double ball bearing system. BEE 5 Star rated-1200 mm sweep BI01010001010000000000000515BI0100001283 0.000 Nos Excess(+) Full Conversion INR

149 Supplying and laying of aluminium conductor PVC insulated armoured served sheathed cable 1100 volts grade at the depth of 750 mm bellow ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on side and on top .On surface the cable run shall be fixed on MS clamps etc.of suitable size or as directed by the Engineer-Incharge ,complete in all respect.The armouring of the cable shall be properly connected with the earth conductor by clamps etc. Following size BI01010001010000000000000515BI0100001284 0.000 Mtr. Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information