SPL REPAIR OF SECURITY FENCING P 1622 J OF QUARTER GUARD AROUND BLDG NO P 1622 KOTE BLDG NO P 1631 OF HQ CORPS AND MD ACCN BLDG NO P 220 2 WITH ALLIED WORKS AT LANCER LINE AND OTHER SANCTIONED WORKS UNDER GE ARMY NO 1 JODHPUR

Amount

Demolition of cement concrete as removing existing roof treatment and preparing surfaces to the entire satisfaction of Engr-in Charge /GE including taking down existing plaster, padding,cleaning of all foreign material such as grass roots dust etc and roughening the concrete surfaces by wire brushes and washing down to remove dust etc . flushing at junction of parapets complete and removing the same to the places where as directed.

M&L for plain cement concrete 1:2:4, type B-0 (using 12.50mm graded crushed stone aggregate), as in roof padding over roof for making good depression / undulation to make the existing as filling in depression of roof slab, complete all as specified & directed.

M&L for neat cement slurry @ 3.00 kg/Sqm and screeding / bedding layer of 10 mm thick in CM 1:3 mixed with water proofing compound as per manufacturer instructions over the RCC roof slab for laying of water proofing treatment including providing the following as roof treatment complete all as specified and as directed : - (a) FIRST COURSE: Applying a coat of bituminous primer @ 0.4 litre / Sqm manufactured by the same agency that of APP with a density 0.87 to 0.89 Kg/litre at 25 degree celsius on prepared plastered surfaces. (b) SECOND COURSE: Applying one coat of bonding material using blown type bitumen conforming to IS-702 grade 85/25 @ 1.20 Kg/Sqm (c) THIRD COURSE : Provide a layer of APP modified polymeric membrane centre core of 100mm micron HMHDPE, outer film 20 micron each, thickness 3.00mm having weight not less than 3.00 Kg/Sqm using torch application method with minimum 10cm side lap and 15cm end lap complete . (d) FOURTH COURSE : Applying one coat of bonding material using blown type bitumen conforming to IS- 702 grade 85/25 @ 1.20 Kg/Sqm. (e) FIFTH COURSE : 40 mm thick plain cement concrete 1:2:4 (using 20 mm stone crushed aggregate) as in roof padding, including WPC as per manufacturer instruction. NOTE :- 1. A Information Tablet will be put up in the front side wall of the buildings where this work will be done. All building/structure shall be provided with plaque (tablet) furnishing the information as per PS clause, in plaster engraving in and painted as directed by GE 2.WPC shall be measured and paid separately under respective item.

Taking up or down 25mm bore steel tubing and connections including cleaning for refixing or credited to contractor complete all as specified and directed.

All as per item No 4.00 here-in-above, but size of pipe 20 mm bore.

All as per item No 4.00 here-in-above, but size of pipe 15 mm bore.

Refixing old GI water tubing of 25 mm bore, medium grade including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors including testing complete all as specified and as directed.

All as per item No 7.00 here-in-above, but size of pipe 20 mm bore.

All as per item No 7.00 here-in-above, but size of pipe 15 mm bore including cutting chases, pinning in & making good to disturbed portion to match the existing surface etc., complete all as specified and as directed.

S&F of water GI tubing medium grade, galvanized, with all fittings fixed to wall, ceilings or laid n floors, complete all as specified and as directed. (a) 25 mm bore,

All as per item No 10.00 here-in-above, but size of pipe 20 mm bore.

All as per item No 10.00 here-in-above, but size of pipe 15 mm bore including cutting chases, pinning in & making good to disturbed portion to match the existing surface etc., complete all as specified and as directed.

M&L for PCC 1:2:4 type B-0 (using 12.50mm graded crushed stone aggregate) as in coping/ benching, DPC, pier caps, bed blocks, for hold fast etc., including mixing with WPC and necessary form work, complete all as specified and as directed. Note:- WPC shall be measured and paid separately.

Supply only integral water proofing compound ISI Marked all as specified.

M&L for framed brackets for cooler stand as shown in Drg No CEJZ/TD/72/2015 sheet1/1 of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') and used for step/stairs, complete all as specified and as directed.

S&F in replacement rotational moulded polythene water storage tanks of 500 ltrs capacity, white three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I with PTMT ball valve heigh pressure with epoxy coated aluminium rod and high density plastic ball suitable for 20mm bore pipe weight not less than 210gms including dismantling old tanks or remove to store or credit to contractor, complete all as specified and directed.

All as per item No 16.00 here-in-above, but tank capacity 1000 Ltr.

Taking down carefully cement conc /spalled out concrete from RCC roof projections, ceiling ,sunsheds, beams, etc upto cover depth by chipping out lightly including necessary scafolding etc, complete all as directed.

M&L for 10 mm thick Rendering in CM 1:3 on fair faces of brick work or conc surfaces as in ceilings/chajja/facia & finished even & smooth w/o using extra cement, complete all as specified and as directed.

S&F in repair GI chicken wire mesh of 0.71 mm dia wire & 12 mm mesh size fixed with nails & screws around RCC chajjas/fascias etc., complete all as specified and as directed.

Racking out joints/ pointing to squared rubble or polygonal rubble un-coursed or brought up to courses masonry built in cement mortar or cement lime mortar, coursed or un-coursed in walls not less than 12mm deep, washing the joints, removing rubbish off the premises and keeping the surface to pointed or plastered wet for two days prior to re-pointing or plastering complete all as specified & directed.

M&L keyed pointing in cement mortar (1:3) to squared rubble masonry regular coursed or un coursed complete all as specified & directed.

Taking down cement or cement lime plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc and removing rubbish to out side MD land complete all as specified and as directed.

M&L for 15 mm thick rendering in CM 1:6 on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing finished surface even and smooth without using extra cement, complete all as specified and as directed.

M&L 15 mm thick rendering in cement mortar 1:4 on fair faces of stone or brick work or concrete surfaces mixed with water proofing compound as per manufacturer instructions and finished the surfaces even and smooth with out using extra cement complete all as specified and as directed. Note :- WPC will be measured and paid seperately.

M&L for 10 mm thick Rendering in CM 1:4 on fair faces of brick work or conc surfaces as in ceilings/chajja/facia & finished even & smooth w/o using extra cement, complete all as specified and as directed.

M&L for Preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash on ceiling surfaces complete all as specified and as directed.

M&L for preparation of old decorated ceiling surfaces including cornices pilasters by brooming down or steel wire brushing, scraping down,smoke shoot,moulds,moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on ceiling, complete all as specified and directed.

M&L for Preparation of new plastered or unplastered surfaces of wall and applying three coats of white wash on wall surfaces complete all as specified and as directed.

M&L for preparation of new plastered wall surfaces and applying two coats of plastic emulsion paint over & including M&L for two coats of wall care putty complete all as specified and as directed.

M & L preparing old decorated plastered or un-plastered surfaces of wall, pillasters, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spot and washing down with water including complete removal of existing treatment complete.

M&L for preparation of old/new decorated/plastered surfaces of walls and applying one coat of weather proof exterior acrylic emulsion paint over one coat of alkali resistant acrylic primer including preparation of surfaces and filling of crades by birla putty complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance out side MD land complete all as specified and as directed.

Dismantling, stone slab, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and as directed.

M&L for 25 mm thick Plain cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in sub base of flooring, including. finishing the surface even & rough to receive tiling etc., complete all as specified and directed.

M&L for glazed colour ceramic tiles (premium quality) of size 250X450X6-7mm / 300X450X6-7 mm, as in vertical surface such as i.e. dado/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over & including M&L 10mm thick backing coat in CM (1:3) complete all as specified and directed.

M&L for non skid ceramic coloured tiles (premium quality) of size 6 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including M&L 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

M&L for double charged dark shade vitrified ceramic tiles, 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, (size & shape, shade and pattern as approved by GE), as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles, over & including M&L 15 mm thick screed bed in cement mortar 1:6, complete all as specified and directed.

All as per item No. 39.00 here-in-above, but as in skirting over & including M&L 10 mm thick rendering in CM 1:4 complete all as directed.

M&L for 300x300x10mm thick textured finished external grade tile, (shade and pattern as approved by GE), as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles, over & including M&L 15 mm thick screed bed in cement mortar 1:4, complete all as specified and directed.

Forming jambs etc to openings with including cutting, toothing and properly bonding in to old work including facing and pointing [if necessary] to match existing work, complete built in Cement Mortar 1:4 complete all as specified and directed.

Cutting openings through brick walls built in cement mortar for doors, windows and other openings or enlarging existing openings or converting window in to door openings etc or cutting out defective masonry for underpinning including providing, fixing and removing, shoring, cleaning and stacking bricks and removing surplus to store and rubbish to out side MD land complete all as specified and as directed.

M&L for 18 to 20 mm thick (telephone black shade) granite stone, as in WHB counter top, machine cut, (table rubbed and polished) best quality as per sample, including & over 20 mm thick screeding in CM1:3 including rounding & double mouldlng with jointless finish of the edges, including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.providing suitable dia hole in the slab for the gas pipe, complete all as specified and as directed.

M&L 50 mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate laid in alternative bays as in plinth protection including finishing the surface even & fair & filling the joints with mastic filling i.e one part of bitumen 85/25 and 3 parts of sand by weight in 2 mtr interval, complete all as specified and directed.

S&F 140 mm floor door stopper of aluminium alloy body and tongue , anodised ,with hard drawn steel spring ,fixed in floor, complete all as specified and directed.

Supply and fix magnetic stopper/catcher for door any size shape all as speicified and directed.

S&F in replacement 20 mm bore gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe, complete complete all as specified and directed.

S&F in replacement 25 mm bore gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 600mm, complete all as specified and directed.

S&F in repair Soap dish, cromium plated , any type, fixed to plugs with chromium plated brass screws, complete all as specified and directed.

S&F in repairs over head Shower rose 150x150 mm of ABS Body chromium plated brass body (Nickel 10 microns and chrome 0.3 microns) with grey face plate & with arm having swivel joint cromium plated best quality, complete all as specified and directed.

S&F in repairs two way way angle bib cock chromium plated brass body, (Nickel 10 microns and chrome 0.3 microns) fancy type 15 mm bore /size, complete all as specified and directed.

S&F in repairs two way angle bib cock chromium plated brass body(Nickel 10 microns and chrome 0.3 microns), fancy type 15 mm bore /size, complete all as specified and directed.

S & F in repairs vitreous china ware wash hand basin, white, flat back of size 550 mm X 450 mm including 32 mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, 32mm bore PVC flexible waste pipe,PVC connection15mm size with PTMT nuts of length 450mm long including pillar tap, cast copper alloy, chromium plated, 15 mm dia, with capstan head, screwed down high pressure with or with out lettered "Hot" or "Cold" with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and as directed.

Supply only in replacement 10 ltrs capacity PVC valve less, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of 32 mm dia complete all as specified and as directed.

S & F in repairs stainless steel kitchen sink with drainage board, made of stainless steel 1 mm thick, with plugs, washers and waste pipe, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to waste pipe, over all size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and as directed.

S&F stainless steel plate rack of size 1200mm X 1000mm X 200mm of approved pattern made out of stainless steel sheet 1 mm thick with round 8mm dia rods complete all as specified and directed.

S&F in repairs Corner Glass shelf 250mm (as per sample) superior quality with CP tubular framing & brackets complete all as specified and directed.

S&F in repairs MS chromium plated peg set of five fixing with wall, complete all as specified and directed.

S&F in repairs PTMT bath cabinet of size 355mmx455 (as per sample) fixed with and including chromium plated brass screws and wooden claeats, complete all as specified and directed.

Writing letters or figures (Black Roman, Italic or Indian n. exc 30cm high with thick paint complete all as specified

S&F in replacement vitreous ware wash down water closet [Pedestal Pattern], white [ETWC] including plastic water closet seat back closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and 'P' or 'S' trap connecting to drain pipe and flushing pipe etc., complete all as specified and directed.

S&F tubular towel rail 20mm dia brass chromium plated brass body(Nickel 10 microns and chrome 0.3 microns) `D' type 60cm long with bracket and fixed complete all as directed.

Dismantling of cast iron of CI / PVC soil, waste & vent pipe jointed in cement mortor of size 110/100mm bore, incld. All fittings, complete all as directed

Dismantling of cast iron of CI / PVC soil, waste & vent pipe jointed in cement mortor of size 75mm bore, incld. All fittings, complete all as directed

S&F 75 mm bore cast iron (Spun pipes) soil waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floor complete all as specified and directed

All as per item No. 68.00 here-in-above, but fixed to wall

All as per item No. 68.00 here-in-above, but 100 mm bore pipe

All as per item No. 70.00 here-in-above, but fixed to wall

S&F in repair CI bend with oval acess door fixed to pipe, suitable for 100 mm bore pipe, complete all as specified and directed.

S&F in repair CI connector of length 30 cms including cutting of holes with lead joints suitable for 100 mm bore pipe, complete all as specified and directed.

S&F in repair CI branch pieces single socketed Y equal or unequal suitable for 100 mm bore pipe, complete all as specified and directed.

S&F in repair CI branch pieces double socketed Y equal or unequal suitable for 100 mm bore pipe, complete all as specified and directed.

S&F in repair CI bend with oval acess door fixed to pipe, suitable for 100 mm bore pipe, complete all as specified and directed.

S&F in repair CI branch pieces single socketed Y equal or unequal suitable for 75 mm bore pipe, complete all as specified and directed.

S&F in repair CI branch pieces double socketed Y equal or unequal suitable for 75 mm bore pipe, complete all as specified and directed.

S&F 100mm dia CI floor trap plain grating including jointing with solvent cement, complete all as specified and as directed.

S&F Cast iron nahani trap with CP grating out let diameter 75mm including jointing to waste pipe fixed in cement mortar 1:1, complete all as specified and as directed.

S&F in replacement decorative type curtain rod stainless steel finish of pipe 22 to 25mm dia with best quality knob metal with double fitting type including stainless steel brackets fixed to walls complete with two nos decorative stainless steel knobs at each end, complete all as specified and as directed.

Taking down chowkhats or frame with shutters (without taking of shutters from the frames) area not exc 1.5 Sqm each, complete all as directed.

Taking down chowkhats or frame with shutters (without taking of shutters from the frames) area exc 1.5 Sqm but not exceeding 4 Sqm each, complete all as directed.

Taking down shutters of any description area exceeding 1.0 Sqm but not exceeding 2 Sqm each complete all as specified and as directed.

Taking down Shutters of any description and refixing the shutters in the same opening of any description exceeding 1.00 Sq.m and not exceeding 2.00 Sq.m each after easing and adjusting complete all as specified and as directed.

M&L mild steel work as in door frame and similar work fixed with angle cleates, confirming to Fe 410 Grade E - 250 Quality A, complete all as specified and as directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC ‘C’ channel having a wood grain printed PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and Wood Grain Printed(Both sides) PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of wood grain printed (both sides) PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per spec & drawing

M& L for solid PVC door frame of size 50x47mm made out of 5mm wood grain printed colour PVC sheet reinforced with MS square tube complete all as specified.

S&F of aluminium anodized ,tower bolt 150 mm long, extruded section complete all as specified and directed.

S& F of aluminium alloy anodised sliding door bolt woth hasp and stalpe (bolt type and fixings clips of sheet cast or extruded sections and fixings bolts and sliding bolts of extruded sections and fixed 16mm dia and 300mm long complete all as specified and directed.

S&F Mild steel Butt hinges, medium weight, cold rolled mild steel, and fixed 100 mm size complete all as specified and directed.

S&F Stainless steel butt hinges 100mm size medium wt fixed with steel nut blots in PVC door frames & PVC shutters. complete all as specified and directed.

S &F Anodised Aluminium handles 150 mm size D type with plate complete all as specified and directed.

M&L preparation of new or previously untreated steel surface of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over & including M&L single coat of red- oxide, zinc chrome primer complete all as specified and as directed.

M & L for preparing new or previously untreated wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over & including M&L single coat of pink primer complete all as specified and as directed.

M & L for preparation of old painted wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint of any tint complete all as specified and as directed .

All as per item No. 96.00 here-in-above, but steel surfaces.

Taking out from position framed wood work as in cupboards/cabinets etc with all fittings ,shutters, shelves, drawers etc in any position fixed in walls or floors & removal of the rubbish outside MD land all as directed at site for overall sizes exc 0.50 sqm but not exc 1.50 sqm & depth not exc 60cm, complete all as directed.

M&L for UPVC Caoted Celuka printed in one of two different colours( with wood grain printed pattern /ivory clour finish) polyvinyl chloride (PVC) sheet frame of width 150mm & 18mm thickness made out of extruded 18mm PVC sheet and joined with suitable Cement Solvent adhesive and screw.The frame shall be fixed to the wall using 75mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 3 Nos. of screws to be provided for each vertical member & minimum 2 Nos. for horizontal member etc, all as per manufracturers specifications, complete all as specified and as directed.

M&L for 18 mm thick solid PVC sheet UPVC Caoted Celuka printed in one of two different colours( with wood grain printed pattern /ivory clour finish) as in kitchen cabinet shutters ,all round body of cabinets , shelves ,drawers etc cut to required size jointed with solvent cement & steel screws etc complete all as specified & directed .

S&F 30 mm width of fl continious piano hinges, stainless steel, complete assembly complete all as specified and directed.

Extra over solid PVC sheet for fixing 18 mm width & 2-3 mm thick PVC coloured lipping of approved design & colour fixed with solvent cement or headless nails, complete all as specified and as directed.

S&F '0' degree clip type self closing hinges for cabinets fixed with cadimum coated screws, complete all as specified and as directed.

S&F 100mm size bright finished chromium plated steel handle of approved shape & design fixed with cadmium coated screws on the kitchen cabint shutters, complete all as specified and as directed.

S&F 75mm size bright finished cromium plated steel handle of approved shape & design fixed with cadmium coated screws on the kitchen cabint drawers

S&F magnetic catches for cabinets of size 50 mm complete with striking plate & magnetic stud complete all as per approved smaple.

S&F drawer runners folding type with guide channels & sliding channel with approipiate ball bearing/ rollers etc complete to obtain smooth movement of the drawers.

M&L for stainless steel tray as per trade pattern of various sizes for drawer to keep the kitchen utensil as directed.

Demolition of stone / boulder masonry walling, built in cement mortar including all quoins, arches, pillars etc and removal unserviceable materials, debris, rubbish to out side MD land complete all as specified and directed.

M&L for squared rubble walling, Jodhpur type, regular coursed well bonded ,bedded and solidly hearted built in cement mortar 1:6, complete all as specified and directed.

All as per item No. 110.00 here-in-above, but except stone

Extra over stone walling for hammer dressing to face stone & dressing of face beds & joints as specified of squared rubble walling Jodhpur type brought upto courses with maximum depression of face from straight edge held against the dressed surface n exc 20mm and dressing face beds and joints, complete all as specified and directed.

M&L for machine cut sand stone slabs, 5 cm thick, Jodhpur pattern/colour in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, etc not exceeding 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar 1:4 complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth, complete all as specified and directed.

M&L precast cement concrete block masonry using PCC 1:2:4, type B-1 solid blocks, exceeding 10 cm in width and setting in cement mortar 1:4, straight or curved on plan exceeding 6 m mean radius complete all as specified and directed.

S&F in repair 15 mm bore CP brass two way angular stop cock, screwed down high pressure with crutch or butterfly handle scrwed both ends for iorn pipe complete all as specified and directed.

S&F in repair 15mm bore CP brass, central hole basin mixture pop um waste system with 450 mm long copper pipe and brass nuts ISI Marked sitable for over head counter, complete all as specified and directed.

S&F in replacement CP brass wall mixer with telephonic shower arrangement ,connecting legs and wall flanges, including overhead shower, crutch and telephone shower complete all as specified and as directed.

S&F in repair 15mm bore CP brass, sink mixture pop up waste system with 450 mm long copper pipe and brass nuts ISI Marked sitable for over head counter, complete all as specified and directed.

S & F in repair Bidet spray (Health faucet) with 1 meter PVC tube and holder, complete all as specified and directed.

Corner Glass shelf 300mm superior quality with CP tubular framing & brackets complete all as per sample. Make:- Jaquar/Cera/Hindware

Rounding of the edges of stone slabs as in cooking platforms , treads of steps shelves & cills etc , complete all as specified and directed.

5 - 6 mm thick bevelled edges high quality looking mirror fancy type fixed to wall with chromium plated screw with cup washers etc complete all as specified and as directed

PVC (SWR) floor trap, plain with grating including jointing with solvent cement for 75 mm bore pipes , complete all as specified and directed.

Taking down steel windows/ vents & remove from site complete all as specified.

M&L factory Made flush shutters, 30 mm thick solid core with block board core constructionand plywood face panels, commercial type on both sides as per IS 2202(part-I, 1999) . The stiles & rails shall be with out any joint and made with non- coniferous timber hard wood (Hillock/ Mirantee/ Bosum/ Benteak) with moisture content not less than 12% as per IS. The face panel comprising of ply wood or cross band and face veneers shall be glued by hot pressed process. The over all finished thickness of face panel shall not be less than 30mm while the thickness face veneer shall not be less than 0.6 mm complete all as specified and directed.

S&F 35 mm thick second class hard wood factory made plain, framed, panelled shutters, with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and Style as per IS:1003 (Part-1), kiln seasoned and chemically pressure treated complete all as specified and as directed.

M&L 35mm thick factory made 2nd class HW glazed and skelton shutter and open rebated and prepared to receive glass, gauge etc (without sash bars), edges or framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR Part-I Section 8 Clause 8.24 (a) complete all as specified and as directed.

M&L pre powder coated coloured aluminum anodized door frame and shutters for door/windows, etc or as approved by GE including jointing cleats for fixing etc as per manufacturers instructions complete all as directed. Note : (i) Weight of all aluminum members shall be measured(ii) Hinges, handles etc shall be measured and paid separately. (iii) Glass pan and rubber beading shall be measured and paid separately. (iv) Fixing of shutters with fittings shall be as per manufacturers instructions.

Pre powder coated aluminium decogrill all as per sample fixed to aluminium framework of windows & ventilators.

4.80 mm thick plain Sheet glass tinted , ordinary quality and glazing with secured in wooden beads or snap fit glazinng clips square exc 0.5 sq. m in each pane

4 mm thick pin headed figured glass in small widths as in louvers of ventilators complete all as directed.

Stainless steel wire cloth 0.36 mm nominal dia of wire & avg width of appertuer 1.40 mm fixed to Anodised aliminium framework of windows / vents & door shutters etc ccomplete.

M&L for GI frame work for seamless ceiling comprising of GI perimeter chanel 0.55mm thick with two unequal flanges of 20 & 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm c/c intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm c/c with GI cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2M length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to intermediate channel at 457mm c/c and hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and including M&L for applying 02 mm thick plaster of paris over and including S&F gypsum board 12mm thick in ceiling fixed with screws as per manufacturers instructions over the frame work and preparation of ceiling board and applying two coats of oil bound distemper over & including M&L a coat of wall / ceiling care putty including dismantling of existing false ceiling of any thickness with cover fillets complete all as specified and as directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as specified and directed.

M&L prepainted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L for rolled mild steel sections like angle, channel, flat, square etc as in framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars ,barred iron doors; ladders ;framed balusters walk ways railings framed work of water tanks and similar work confirming to Fe-290Gde E-165 complete all as specified and as directed.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out any type of soil all as specified and directed.

Removal of excavated material soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick in soils complete all as specified and directed.

M&L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in flooring,path , sub foundation etc complete all as specified and directed.

M&L PCC solid building blocks 10 cm thick type B1 1:2:4 set in cement mortar (1:6) complete all as specified and directed.

S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing all as specified and directed.

Excavating in post holes or similar holes each not n exc 0.50 cu.m,getting out any type of soil,returning,fillig in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm complete all as specified and as directed.

M&L for plain cement concrete 1:3:6 type C-2 by using 40 mm graded crushed stone aggregate as in foundation, filling and mass concrete for fencing post complete all as specified and as directed .

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, compaction/ consolidation with power roller, complete all as specified and directed.

S&F mild steel sections like angle, flat etc in post and struts in fencing or with swan neck,, including cutting top to shape as directed,drilling holes,notching for wire etc;flat iron fillets (for securing wire mesh etc including all necessary drilling,bolting or riviting etc confirming to Fe-290Gde E-165 complete all as specified and as directed.

Rolled mild steel work confirming to Fe 410-W, Grade-E- 250, Quality-A as in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc complete, drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings [exclusive of steel sheeting or other covering, running rails and guides] and hanging, also fastening and fixing complete all as specified and as directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but n. exc 10cm long and dia 5 to 10 mm complete all as specified and as directed.

Supply only Chain link MS galvanised fencing any size or type (The max. size of mesh does not exc 100mm x 100mm and dia of wire exc 4mm.) as approved by G.E. Note:- BOO will consitute by GE to determinate the weight of chainlink.

Fixing only Chain link fencing including line wires,any mesh, size and type to any standards,rails straining bolts, etc. including provision of binding wire complete all as specified and as directed. Note:(i)-Chainlink will be obtained from item No. 17.00 here-in-before.

Supply only Mild steel round or square bars 10mm dia.,in available length Fe-290 (Gde-165) for fixing of chain link fencing complete all as specified and as directed.

Dismantling of posts or struts (wood, steel or RCC) any section,embedded in Cement concrete under natural ground including taking out embedded portion and making good disturbed ground complete all as specified and as directed.

Dismantling of barbed wire or fencing wire mesh, any type and any size complete all as specified and as directed.

Dismantling structural steel work including doors,gates but excluding framed truss etc. complete all as specified and as directed.

M&L precast cement concrete block masonry using PCC 1:3:6, type B-1 solid blocks, exceeding 10 cm in width and setting in cement mortar 1:4, straight or curved on plan exceeding 6 m mean radius complete all as specified and directed.

M&L preparation of new plastered or un-plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and as directed.

M&L for welding cast iron designer pieces ornamental type with intricate designs & like spirals , Spikes etc as per sample fixed to steel gate by welding., complete all as specified and as directed.

S&F galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and as directed. Note : - Each line wire to be measured.

Supply and Fixing of concertina coil as 600mm dia rounded 50 circuls covering in 10RM with necessary fixing material complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate), as in sub base to floor, complete all as specified and directed.

Supply and laying machine pressed / factory made chamfered edge cement concrete rubberised interlocking paver block, 60mm thick with 6 mm thick top layers of anti abrasive material of M-35 grade with any colour, design & pattern, & size/ shape, as approved by GE as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness made by table vibratory method using PU mould, laid in required colour & pattern over and including M&L 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed.

Supply and laying machine / factory made kerb stone of M-25 grade,at or near ground level, cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified and directed.

M& L for precast cement concrete Type B-0 1:2:4 (12.50mm graded aggregate) as in louvres and jallies, cement grill any type model of Zafri , 35mm thick (measured solid), set in cement mortar 1:4 fixed with PCC post, incld. all mouldings complete all as specified and directed.

Precast cement concrete1:2:4, type B-0 by using 12.5mm graded stone aggregate as in pillars to provide support of RCC jallies, jointed with neat cement slurry, in CM 1:4, complete all as specified and as directed.

M&L for face work masonry with 100-125 mm thick white / chitter sand stone having rock face bushings not less than 15-20 mm incl chisel drafted margin 20-25 mm wide all as per local Jodhpur Pattern (KADAOU) regular coursed well bonded bedded & solidly hearted built in CM 1:4 complete all as specified . Height of Kadaou stone course shall not be less than 200mm all as directed at site.

M&L for sand stone moulded weathered copings , window cills & the likes set in CM 1:6 with corbelling , throatings all as per design complete.

M&L for keyed pointing to kadaou facework of Jodhpur sandstone in CM 1:3 using white cement & pigment to match the shade of the stone.

Taking down old sand stone/precast cement conc chattri over all size 0.6x0.75x1.2m removal away frome site etc complete all as specified and directed.

M&L for fixing in position of Sand Stone Chattri Jodhpur pattern octagonal shape each side of length 45 to 45 cm & height not less than0.75m ( excluding dome) incl 8 nos sand stone columns, sand stone arches , brackets & snad stone dome slab of minimum 75 cm height of approved shape & carvings incl 1 no Brass finials of ht 0.30 m complete all as per trade pattern of interlocking & fixing of parts with suitable solvent cement adhesive all as directed

Taking down carefully aluminium/copper point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendent, regulators, sockets, bell push, bell, light fittings etc. removing serviceable materials to store for keeping in safe custody for reuse at site or for taking credit (Credit shall be made as per Schedule of credit), removing rubbish from the site and making good all disturbed surfaces of walls, floors etc. to match to the existing surfaces, complete all as directed.

Taking down unserviceable sub main wiring with copper/aluminium conductor,PVC insulated,unsheathed cable of any size drawn through and including rigid PVC or PVC casing & caping including cutting chases for cinduits and making good disturbed surfaces complete all as specified and as directed.

M&L modular point wiring using approved colour coding (Red , Black and Green for single phase circuits) as per IS code -694 with valid CML No., with multi stranded copper conductor 1.5 sq mm nominal cross-sectional area, single core, PVC insulated and sheathed FRLSH cable 1100 Volts grade, ISI marked, in and including heavy duty PVC conduit of dia not less than 20mm and conduit accessories ISI marked with valid CML No. ( IS 9537 -1983 for concealed in wall ISI marked with modular sunken box with with modular cover plate(ISI Marked) cover for fixing of switches, sockets and fan regulators etc, inciuding PVC insulated & sheathed multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly for One light/fan/bell point controlled by one, one way switch, complete all as specified and directed.

All as per serial Item No. 173.00 above but for one 3 pin socket outlet 5/6 Amps on the same board, complete all as specified and directed.

All as per serial Item No. 173.00 above but for one 3 pin socket outlet 5/6 Amps on the independent board, complete all as specified and directed.

All as per serial Item No.173.00 above but with 2.5 Sq mm single core multistanded copper conductor cable for 3 pin 16 Amp socket outlet on independent board .omplete all as specified and directed .

All as per serial Item No.173.00 above but with 4.00 Sq mm single core multistanded copper conductor cable for 3 pin 16 Amp socket outlet on independent board .omplete all as specified and directed .

S&F switch modular type single pole one way 5/6 Amp ISI Marked, complete all as specified and directed.

S&F switch modular type single pole one way 15/16 Amp ISI Marked, complete all as specified and directed.

S&F modular type bell push single pole one way 5/6 Amp ISI Marked, complete all as specified and directed.

S&F modular type bell multi music tune single pole one way 5/6 Amp ISI Marked, complete all as specified and directed.

S&F socket outlet 2 in 1, 5 pin, 5 and 15 amp modular type ISI Marked, complete all as specified and directed.

S&F socket outlet, 6 Pin, combined 2 module, 6/16 Amps, complete all as specified and directed.

M&L modular type ceiling rose, 3 phase / PVC / Polycarbonate, isolated body, ISI Marked, complete all as specified and as directed.

S&F insulated Batton lamp holder modular type metal cased body of brass with back plate suitable for batton fittings including 9 watt LED Lamps ISI Marked complete all as specified and directed.

Taking down and refixing Exhaust fan and connecting up including provision of cable from ceiling rose or connector to fan including filling cavities with filler, one coat after cleaning all dust etc., complete all as directed. applying two coats of synthetic enamel paint over one coat of red oxide primer over 10cm width or girth, complete all as specified and as directed.

Taking down and refixing ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan including filling cavities with filler, one coat after cleaning all dust etc., complete all as directed. applying two coats of synthetic enamel paint over one coat of red oxide primer over 10cm width or girth, complete all as specified and as directed.

S&F in Prewired distribution board (sheet metal enclosures) SPN 4 way with suitable rated 200 Amps bus bar for Double door DB's of apporved gauge conforming to IS relevant, IP-43 protection, 240 volt, complete all as specified and directed by Engr-in-charge. Note -Rate are deemed to be included for flashing in wall concealed complete, making good and matching existing surface.

S&F in Prewired distribution board (sheet metal enclosures) SPN 12 way with suitable rated 200 Amps bus bar for Double door DB's of apporved gauge conforming to IS relevant, IP-43 protection, 240 volt, complete all as specified and directed by Engr-in-charge. Note -Rate are deemed to be included for flashing in wall concealed complete, making good and matching existing surface.

S&F Vertical Distribution Board, double Door, suitable for 'A' Frame, incorporating 4 Pole MCCB 100 A to 160A, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, TPN 4 way, 415 volts with bus bar rating 300 Amps, dust and vermin proof, suitable for incorporation of MCB’s and MCCB etc and making all necessary connections, duly flush of wall surface, as in replacement, including taking down old u/s material, complete all as specified and as directed.

S&F MCCB, 'A' Frame, thermal adjustable magnectic setting, Ics = 75% 25 kA, 415V, 100 Amp, 4 Pole with over load and short circuit protection, suiatble for item No.124.00, (ISI marked), as in repairs, complete all as specified and as directed.

Supply, fixing, testing and commissioning SP 5-32 Amps 240V 10KA 'B' curve miniature circuit breaker (MCB) and current carrying capacity in the DB complete with connection, complete all as specified and as directed.

Supply, fixing, testing and commissioning SPN 40 Amps 240V 10KA 'B' curve miniature circuit breaker (MCB) and current carrying capacity in the DB complete with connection, complete all as specified and as directed.

Supply, fixing, testing and commissioning SPN 63 Amps 240V 10KA 'B' curve miniature circuit breaker (MCB) and current carrying capacity in the DB complete with connection, complete all as specified and as directed.

Supply and fixing in replacement LED lights fitting 1x 20/22W, 4 feet, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed.

Supply and fixing in replacement decorative wall lights fitting 9W, 220V, AC, holder including LED LAMP connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed.

Supply & replacement of LED light fitting 1X10W bulk head surface mounted, decorative oval bulk head edge- lit LED luminaries comprising of high brightness LED's etc., complete with all accessories and connectiong up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed

Supply and fixing decorative post top lantern lights fitting 20 W, 220V, AC, holder, 360 DEGREE, IP 65 protection, including LED LAMP connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed.

S&F in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

S&F in replacement bldg security LED Light Luminaire of 35 Watts having IP 65/66 protection fiting made out of pressure die cast Aluminium housing, operating Voltage 160-260 Volts with in built surge protectore, toughened glass with and including GI pipe 20/25mm dia bracket of 1.5 m in length including drilling holes, nuts & bolts 2 coats of red oxide primer on GI pipe and fixing with wall security light on building wall connecting cable, complete all as specified and directed.

S&F for sub main wiring with two runs of PVC insulated but unsheathed multi stranded copper conductor FRLSH cable 1100 volt grade of size 6 Sqmm and one run of 6 Sqmm single core PVC insulated but unsheathed multi stranded copper conductor FRLSH cable (Phase-Red, Neutral-Black, Earth-Green) 1100 volt grade as earth lead drawn through in and including non metallic PVC conduit of size 25 to 32 mm dia (external) with wall thickness not less than 1.8 mm, (ISI marked) concealed in wall including accessories like bends, tees junction boxes, etc fixed in wall or ceiling etc., complete all as specified and as directed. NOTE: Two runs of 6 Sqmm cable with one run of 6 Sqmm earth wire and PVC conduit shall be measured & paid for as one length.

S&F for sub main wiring with two runs of PVC insulated but unsheathed multi stranded copper conductor FRLSH cable 1100 volt grade of size 4 Sqmm and one run of 4 Sqmm single core PVC insulated but unsheathed multi stranded copper conductor FRLSH cable (Phase-Red, Neutral-Black, Earth-Green) 1100 volt grade as earth lead drawn through in and including non metallic PVC conduit of size 25 to 32 mm dia (external) with wall thickness not less than 1.8 mm, (ISI marked) concealed in wall including accessories like bends, tees junction boxes, etc fixed in wall or ceiling etc., complete all as specified and as directed. NOTE: Two runs of 4 Sqmm cable with one run of 4 Sqmm earth wire and PVC conduit shall be measured & paid for as one length.

S&F for sub main wiring with two runs of PVC insulated but unsheathed multi stranded copper conductor FRLSH cable 1100 volt grade of size 1.50 Sqmm and one run of 1.50 Sqmm single core PVC insulated but unsheathed multi stranded copper conductor FRLSH cable (Phase-Red, Neutral-Black, Earth-Green) 1100 volt grade as earth lead drawn through in and including non metallic PVC conduit of size 25 to 32 mm dia (external) with wall thickness not less than 1.8 mm, (ISI marked) concealed in wall including accessories like bends, tees junction boxes, etc fixed in wall or ceiling etc., complete all as specified and as directed. NOTE: Two runs of 1.50 Sqmm cable with one run of 1.50 Sqmm earth wire and PVC conduit shall be measured & paid for as one length.

M&L single pole and neutral enclosure with two pin earth industrial plug and socket with one MCB SP 20 Amps complete all as specified and as directed.

Taking down & refixing including connecting & commissioing electric meter

S&F in replacement heavy duty exhaust fan, steel body, AC single phase 300 mm sweep, 900 RPM, complete with frame & louvers, connecting with & including 3 core PVC insulated copper conductor flexible cable of size 23/0.0076 (or eq. Size in mm) from ceiling rose to fan, complete all as specified and as directed.

S & F in replacement ceiling fan 1200mm sweep, min air delivery 210 CFM with service value 6.00 BEE 5 star rating, brushless direct current motor (BLDC), suitable for single Phase 230 volts and connected with twin core twisted flexible copper conductor cable from ceiling rose to fitting complete all as specified and as directed. .

Supply,testing and installation in replacement electric storage geyser of capacity 25 Ltrs, BEE 5 star rating, 230Volts, AC, 50Hz, comprising of heating element 2000 watt, storage type steel body with copper tank, puff insulation,both power indicating LED lamp and heating indicating LED lamp neccasry suitable 3 core copper cable,suitable plug top, inlcluding supply and fixing of inlet and out let connection to geyser with steel grip,chromium plated PVC connection of 600mm in length - 02 Nos (one for inlet GI pipe and other one for outlet connection) suitable to connect inlet GI pipe 15mm dia and out let GI pipe 15mm dia (out let PVC connection should be capable to withstand the designed temparature of Geyser) and geyser shall be fixed on wall surface with wall mount bracket and 10 cm anchor bolts as required inclduing all necessary plumbling works and civil works complete all as directed and as specified.

S&F in replacement air circulator fans 230 V single phase oscillating 400 mm sweep suitable for wall mounting, complete all as directed and as specified.

Taking down and refixing in same position geyser and connecting up including provision of cable from 15 Amp switch socket including filling cavities with filler, one coat after cleaning all dust etc., complete all as directed. applying two coats of synthetic enamel paint over one coat of red oxide primer over 10cm width or girth, complete all as specified and as directed.

S&F in replacement heavy duty exhaust fan, steel body, AC single phase 230 mm sweep, complete with frame & louvers, connecting with & including 3 core PVC insulated copper conductor flexible cable of size 23/0.0076 (or eq. Size in mm) from ceiling rose to fan, complete all as specified and as directed.

M&L point wiring using approved colour coding (Red , Black and Green for single phase circuits) as per IS code -694 with valid CML No., with multi stranded copper conductor 1.5 sq mm nominal cross-sectional area, single core, PVC insulated and sheathed FRLSH cable 1100 Volts grade, ISI marked, drawn through in and including heavy duty PVC conduit of dia not less than 20mm and conduit accessories ISI marked with valid CML No. ( IS 9537 -1983 for surface mounted / concealed in wall ISI marked with with pressed flush metal boxes covered with inner plates & outer plates etc, with cover plate(ISI Marked) cover for fixing of switches, sockets and fan regulators etc, inciuding PVC insulated & sheathed multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly for One light/fan/bell point controlled by one, one way switch, complete all as specified and directed.

All as per serial Item No. 212.00 here-in-above but for one 3 pin socket outlet 5/6 Amps on the independent board, complete all as specified and directed.

All as per serial Item No. 212.00 here-in-above but for one 3 pin socket outlet 5/6 Amps on the same board, complete all as specified and directed.

All as per serial Item No.212.00 above but with 2.5 Sq mm single core multistanded copper conductor cable for 3 pin 15/16 Amp socket outlet on independent board .omplete all as specified and directed .

S&F switch piano type single pole one way 5/6 Amp ISI Marked, complete all as specified and directed.

S&F socket outlet 2 in 1, 6 pin, 5 amp flush type ISI Marked, complete all as specified and directed.

S&F switch piano type single pole one way 15/16 Amp ISI Marked, complete all as specified and directed.

S&F socket outlet 2 in 1, 6 pin, 5 and 15 amp flush type ISI Marked, complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 60 x60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in elevtrical plate no. 3 connected to Earthing test point all as specified or indicated including testing on completion Note : (i) Rates are deemed to be included for necessry earth work ,PCC pit , RCC cover etc complete. (ii) Earth lead shall be up to 7.5 Mtr and rates are deemed to be included for GI pipe 15mm Light grade upto 7.5 mtrs for protection of earth wire 4.0 mm dia, complete all as specified and as directed.

Supply, laying, jointing, testing and commissioning 1100 volt grade heavy duty XLPE insulated LT under ground cable, sheathed, as per IS- 7098 (Part I) 1988, galvanized steel strip armoured heavy duty multi stranded aluminum conductor laid in trenches / passed through pipe/duct road crossing, fixed on poles/ wall with clamps made out of mild steel flat iron including fixing accessories like brass cable glands double compression type, lugs, nuts, bolts, washers etc of size 3.5 core 50 sqmm, complete all as specified and directed Note: - (i) Excavation and earthwork, sand cushioning, PCC cable cover, shall be measured and paid separately in relevant item here in after .

Supplying and laying un-reinforced precast concrete cable cover, class LV, type 1, flat, size 300x180mm x40 mm, complete all as specified and as directed.

M&L for dry clean fine river sand as in sand cushioning to underground cable including punning down of sand layer, complete all as specified and as directed. Note :- Punned thickness shall only be measured and paid.

M&L for galvanised steel tubing, medium grade, for protection of cable, laid in trenches/road crossing/floor or fixed to pole/wall with all fittings, of size 40 mm bore, complete all as specified and as directed.

Surface excavation n.exc. 30 cm deep and averaging 15 deep and getting out in any type of soil complete all as specified and directed.

NOTE:- (i)- Quantities are clubbed in BOQ for different Jobs. For which ref. Annexure-I on Sl. page. No. 52 to 57 of tender document. (ii)- The contract sum shall be arrived at after duducting amount of schedule of "Credit" from the Total quoted amount

m/s Firoz khan

M/S SUMAN ENTERPRISES