Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.4 LAccepted-Finance | ₹3.4 L | L1 | Accepted-Finance LOWEST |
| 2 | L2₹3.4 L+₹2,999.53 (0.89%)Rejected-Finance KANNUR | KERALA | 670612 | ₹3.4 L+₹2,999.53 (0.89%) | L2 | Rejected-Finance As per resolution |
| Sl No | Description | Qty | Unit | muhammed k L1 | ISMAIL P L2 |
|---|---|---|---|---|---|
| 1.00Renovation work | |||||
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 164.9 | kg | 171.81 ₹28,331.47 Lowest | 190 ₹31,331 |
| 1.00 | OD461411/2025-2026:Supplying and fixing UPVC section with brackets at the end of sheet roof or tiled roof for rain water collection including all cost and materials, conveyance, labour charges ... etc. | 11 | metre | 584.65 ₹6,431.15 Lowest | 584.65 ₹6,431.15 Lowest |
| 1.00 | OD461412/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 meter or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 24.2 | sqm | 572.91 ₹13,864.42 Lowest | 572.91 ₹13,864.42 Lowest |
| 1.00 | 50.18.8.7.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work including cutting chases and making good the wall etc. 63 mm pipe 6 Kgf/cm2 | 5 | metre | 645.69 ₹3,228.45 Lowest | 645.69 ₹3,228.45 Lowest |
| 1.00 | 50.6.7.1:Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for foundation and basement including all cost of materials, labour charges etc. | 6.96 | cum | 7,489.25 ₹52,125.18 Lowest | 7,489.25 ₹52,125.18 Lowest |
| 1.01 | 13.1.2:12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand). | 41.6 | sqm | 324.8 ₹13,511.68 Lowest | 324.8 ₹13,511.68 Lowest |
| 1.01 | 10.25.2:Item Shifted to Sub head 14 as item 14.73
Item Shifted to head 14 as item 14.74
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | 91.2 | kg | 163.89 ₹14,946.77 Lowest | 163.89 ₹14,946.77 Lowest |
| 1.01 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 1.42 | cum | 8,483.41 ₹12,037.96 Lowest | 8,483.41 ₹12,037.96 Lowest |
| 1.01 | 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more | 28 | kilogram | 103.26 ₹2,891.28 Lowest | 103.26 ₹2,891.28 Lowest |
Tender Value
₹3.4 L
EMD Value
₹8,464
Closing Date
13 Aug 2026, 3:00 pmClosed
ASSISTANTENGINEER
AE/LIDEW KARUVARAKUNDUGP
Annual Plan-Karuvarakund GP-2025-26-194/26- GLPS Kizhakkethala School Renovation-194/26-R
2026_LSGD_864384_26
ET1/27/AE/LIDEW/KKD
Open Tender
Civil Works - Roads
Item Rate
240 days
KARUVARAKUNDU
Please refer Tender documents
9 documents required · 9 mandatory
₹750
₹8,464
19 Sept 2026
6 Aug 2026
14 Aug 2026
6 Aug 2026
13 Aug 2026
6 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Renovation work | |||||
| 1.001 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | - | kg | - | - |
| 1.002 | OD461411/2025-2026:Supplying and fixing UPVC section with brackets at the end of sheet roof or tiled roof for rain water collection including all cost and materials, conveyance, labour charges ... etc. | - | metre | - | - |
| 1.003 | OD461412/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 meter or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 1 | sqm | - | - |
| 1.004 | 50.18.8.7.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work including cutting chases and making good the wall etc. 63 mm pipe 6 Kgf/cm2 | - | metre | - | - |
| 1.005 | 50.6.7.1:Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for foundation and basement including all cost of materials, labour charges etc. | - | cum | - | - |
| 1.006 | 13.1.2:12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand). | - | sqm | - | - |
| 1.007 | 10.25.2:Item Shifted to Sub head 14 as item 14.73
Item Shifted to head 14 as item 14.74
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | - | kg | - | - |
| 1.008 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | - | cum | - | - |
| 1.009 | 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more | - | kilogram | - | - |
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
finance_1462647.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.28 MB
BOQ_1462647.xls
BOQ • 0.31 MB
viewsbd.pdf
Tender Documents • 2.02 MB
generalestpdfview.pdf
Tender Documents • 0.02 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .