Renovation/ Repairing of Canal Service Road

Amount

WBM G-2 Providing, Laying, Spreading and compacting stone aggregates of specific sizes (45 mm to 63mm) to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel / vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density as per MORD specification clause 405.2

WBM G-3 Providing, Laying, Spreading and compacting stone aggregates of specific sizes (22.4 mm to 53mm) to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel / vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density as per MORD specification clause 405.3

Providing and applying Primer coat with bitumen emulsion (SS2) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 Kg per sqm using mechanical means as per Techincal specification clause 502

Providing and applying Tack coat with bitumen emulsion using pressure distributor at the rate of 0.30 Kg per sqm on the prepared non bituminous surface cleaned with hydraulic broom as per Technical specification clause 503

Providing, Laying and Rolling of open graded premix carpet of 20 mm thickness composed of 13.2 mm to 11.2 mm dalla grit in proportion of 2:1 either using viscosity grade bitumen @ 1.46 kg per sqm to required line, grade & level to serve as wearing course on a previously prepared base including mixing in a suitable plant, laying & rolling with a smooth wheeled roller 80-100 kN static roller capacity, finished to the required level & grade to be followed by Seal coat Type-C as er technical specification clause 508

Providing and Laying Seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type-C as per Technical specification clause 510

Road marking with applied Thermoplastic compound with reflectorising glass on bituminous surface. Providing & Laying of hot applied Thermoplastic compound 2.50 mm thick including reflectorising glass bead @ 250 gms per sqm area, thickness of 2.50 mm is inclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes.

Earth work in canal with manual compaction and dressing with all lead lift in all type of soils including cost of all materials, labour, T&P etc complete

M/S DILAWAL SINGH