S&T&L,LDG&UNLDG OF PAVER_SZ

S/L DRIVEWAY GREY PVR M- — Supply and laying of 80mm thick grey pavers in line and level and approved pattern and shape, as per attached specifications. The job includes supplying and laying sand bedding, compacting using plate vibrator, all material and labour complete. Pavers will be laid in specified pattern. Plan of laying will be developed by the contractor and prior approval of EIC will be taken before commencement of laying. The pavers supplied should qualify min comp. strength of 47.2MPa and should conform to IS:15658:2006. The party shall have to produce manufacturer's certification on the paver qualifying criteria stated in IS-15658 and limits specified in the attached specification before the pavers are sited. HPCL reserves the right to do random sampling and testing as per IS-15658:2006 to assess manufacturer's certification on qualifying norms specified in the attached specification. The testing charges, if samples qualify, shall be borne by HPCL, else shall be borne by the party.(Refer attached Drawing) Note:Only M Sand to be used for Sand bedding.

S/L DR.WAY COLOUR PVR M- — Supply and laying of 80mm thick grey pavers in line and level and approved pattern and shape, as per attached specifications. The job includes supplying and laying sand bedding, compacting using plate vibrator, all material and labour complete. Pavers will be laid in specified pattern. Plan of laying will be developed by the contractor and prior approval of EIC will be taken before commencement of laying. The pavers supplied should qualify min comp. strength of 47.2MPa and should conform to IS:15658:2006. The party shall have to produce manufacturer's certification on the paver qualifying criteria stated in IS-15658 and limits specified in the attached specification before the pavers are sited. HPCL reserves the right to do random sampling and testing as per IS-15658:2006 to assess manufacturer's certification on qualifying norms specified in the attached specification. The testing charges, if samples qualify, shall be borne by HPCL, else shall be borne by the party.coloured paver(Refer attached Drawing) Note:Only M Sand to be used for Sand bedding.

S/L REFL. GREY D/W PVR — Supply and laying of 80mm thick grey pavers in line and level and approved pattern and shape, as per attached specifications. The job includes supplying and laying sand bedding, compacting using plate vibrator, all material and labour complete. Pavers will be laid in specified pattern. Plan of laying will be developed by the contractor and prior approval of EIC will be taken before commencement of laying. The pavers supplied should qualify min comp. strength of 47.2MPa and should conform to IS:15658:2006. The party shall have to produce manufacturer's certification on the paver qualifying criteria stated in IS-15658 and limits specified in the attached specification before the pavers are sited. HPCL reserves the right to do random sampling and testing as per IS-15658:2006 to assess manufacturer's certification on qualifying norms specified in the attached specification. The testing charges, if samples qualify, shall be borne by HPCL, else shall be borne by the partybut reflective coloured paver. The top layer shall have 10to 15mm uniform thickness made out of Granite/Quartz crushed aggregated of cubical sizes not more than 6 mm & downsize (shall have good abrasion resistant properties) as wearing layer & reflective coating & cement shall be mixed with UV resistant pigment & colour as per HPCL's selection & without impairing the characteristic properties of cement. Top surface shall be made anti skid (indentations) with lacquer coating finish(Refer attached Drawing). Note:Only M Sand to be used for Sand bedding.

REFL. COLOURED D/W PVR — Supply and laying of 80mm thick pavers in line and level and approved pattern and shape, as per attached specifications. The job includes supplying and laying sand bedding, compacting using plate vibrator, all material and labour complete. Pavers will be laid in specified pattern. Plan of laying will be developed by the contractor and prior approval of EIC will be taken before commencement of laying. The pavers supplied should qualify min comp. strength of 47.2MPa and should conform to IS:15658:2006. The party shall have to produce manufacturer's certification on the paver qualifying criteria stated in IS-15658 and limits specified in the attached specification before the pavers are sited. HPCL reserves the right to do random sampling and testing as per IS-15658:2006 to assess manufacturer's certification on qualifying norms specified in the attached specification. The testing charges, if samples qualify, shall be borne by HPCL, else shall be borne by the partybut reflective coloured paver. The top layer shall have 10to 15mm uniform thickness made out of Granite/Quartz crushed aggregated of cubical sizes not more than 6 mm & downsize (shall have good abrasion resistant properties) as wearing layer & reflective coating & cement shall be mixed with UV resistant pigment & colour as per HPCL's selection & without impairing the characteristic properties of cement. Top surface shall be made anti skid (indentations) with lacquer coating finish.(Refer attached Drawing) Note:Only M Sand to be used for Sand bedding.

S/L PEDESTRIAN PVR MIX M- — Supply & laying of 40 mm thick wedge wood (flag) unipavers made from M 25 grade concrete in 1 red and 2 grey combination for walkways and light load areas as advised by EIC .

RELAYING OF PAVERS_TN — Laying of HPCL supplied/existing old pavers in line and level , as per attached specifications. The job includes supplying and laying sand bedding, compacting using plate vibrator, all material and Laying of HPCL supplied/existing old pavers in line and level , as per attached specifications. The job includes supplying and laying sand bedding, compacting using plate vibrator, all material and labour complete. Pavers will be laid at 45 degree to road line in 1 red and 2 grey arrangement. Plan of laying will be developed by the contractor and prior approval of EIC will be taken before commencement of laying.. Note:Only M Sand to be used for Sand bedding.

DRESSING OF DRIVEWAY_TN — Dressing of existing driveway wherever required including excavation to required depth and providing / laying metalling upto 3" or as per required thickness compacted to level desired by ramming, filling up the interstices with stone chips, stone grit powder including all materials and labour, wherever necessary as per instruction of HPCL Engineer/Architect. paver driveway works for regions Kerala Manadatory: No

S/L DRIVEWAY GREY PVR M- — Supply and laying of 80mm thick grey pavers in line and level and approved pattern and shape, as per attached specifications. The job includes supplying and laying sand bedding, compacting using plate vibrator, all material and labour complete. Pavers will be laid in specified pattern. Plan of laying will be developed by the contractor and prior approval of EIC will be taken before commencement of laying. The pavers supplied should qualify min comp. strength of 47.2MPa and should conform to IS:15658:2006. The party shall have to produce manufacturer's certification on the paver qualifying criteria stated in IS-15658 and limits specified in the attached specification before the pavers are sited. HPCL reserves the right to do random sampling and testing as per IS-15658:2006 to assess manufacturer's certification on qualifying norms specified in the attached specification. The testing charges, if samples qualify, shall be borne by HPCL, else shall be borne by the party.(Refer attached Drawing) Note:Only M Sand to be used for Sand bedding.

S/L DR.WAY COLOUR PVR M- — Supply and laying of 80mm thick grey pavers in line and level and approved pattern and shape, as per attached specifications. The job includes supplying and laying sand bedding, compacting using plate vibrator, all material and labour complete. Pavers will be laid in specified pattern. Plan of laying will be developed by the contractor and prior approval of EIC will be taken before commencement of laying. The pavers supplied should qualify min comp. strength of 47.2MPa and should conform to IS:15658:2006. The party shall have to produce manufacturer's certification on the paver qualifying criteria stated in IS-15658 and limits specified in the attached specification before the pavers are sited. HPCL reserves the right to do random sampling and testing as per IS-15658:2006 to assess manufacturer's certification on qualifying norms specified in the attached specification. The testing charges, if samples qualify, shall be borne by HPCL, else shall be borne by the party.coloured paver(Refer attached Drawing) Note:Only M Sand to be used for Sand bedding.

S/L REFL. GREY D/W PVR — Supply and laying of 80mm thick grey pavers in line and level and approved pattern and shape, as per attached specifications. The job includes supplying and laying sand bedding, compacting using plate vibrator, all material and labour complete. Pavers will be laid in specified pattern. Plan of laying will be developed by the contractor and prior approval of EIC will be taken before commencement of laying. The pavers supplied should qualify min comp. strength of 47.2MPa and should conform to IS:15658:2006. The party shall have to produce manufacturer's certification on the paver qualifying criteria stated in IS-15658 and limits specified in the attached specification before the pavers are sited. HPCL reserves the right to do random sampling and testing as per IS-15658:2006 to assess manufacturer's certification on qualifying norms specified in the attached specification. The testing charges, if samples qualify, shall be borne by HPCL, else shall be borne by the partybut reflective coloured paver. The top layer shall have 10to 15mm uniform thickness made out of Granite/Quartz crushed aggregated of cubical sizes not more than 6 mm & downsize (shall have good abrasion resistant properties) as wearing layer & reflective coating & cement shall be mixed with UV resistant pigment & colour as per HPCL's selection & without impairing the characteristic properties of cement. Top surface shall be made anti skid (indentations) with lacquer coating finish(Refer attached Drawing). Note:Only M Sand to be used for Sand bedding.