Amlappuzha North GP 2021-22- Renovation of front office and setting up record room (Pn 94/22)puzha North GP-Construction of Road from Pottakkadu to Puthumpalli in Ward 9 (PN 183/22)

Amount

Record room and front office rennovatin

od1575833/2021_2022 : Providing and fixing Over head Work using 18mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, fixed togetherusig screws complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides for counter with counter top.

od1575834/2021_2022 : Providing and fixing Cup board using Pre-laminated exterior Grade- I MDF Board 18 mm thick confirming to IS:14587 , for racks C.P. brass / stainless steel screwsetc. complete as per architectural drawings and directions of Engineer - in- Charge.<br>Pre-laminated with decorative lamination one side and other side balancing lamination exterior Grade- I<br>MDF Board 18 mm thick confirming to IS:14587

15.13.1 : Taking out doors, windows and clerestory window shutters (steel or wood ) including stacking within 50 metres lead:Of area 3 sq. metes and below

15.7.4 : Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar

9.154 : Providing and fixing frame work for partitions/ wall lining etc. made of 50x50x1.6 mm hollow MS tube, placed along the walls, ceiling and floor in a grid pattern with spacing @ 60 cm centre to centre both ways (vertically & horizontally) or at required spacing near opening, with necessary welding at junctions and fixing the frame to wall/ceiling/floors with steel dash fasteners of 8 mm dia, 75 mm long bolt, including making provision for opening for doors, windows, electrical conduits, switch boards etc., including providing with two coats of approved steel primer etc. complete, all as per direction of Engineer-in- charge.

od1581504/2021_2022 : Providing and fixing Partitions on Light gauge steel frame work<br>with 6mm thick Novapan Sheet as per standard sizes fixed with self drilling / taping screws / fasteners @ 60cm c/c of approved make. .(cost of frame work to be paid for<br>separately).

21.1.1.2 : Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)

9.158.2 : Providing and fixing in wall lining medium density fibre board IS: 14587: 1998 marked, Pre-laminated one side decorative lamination and other side balancing lamination, with necessary fixing arrangement and screws etc. complete.18mm thick.

od1575888/2021_2022 : Providing and fixing Wall panelling on Light gauge steel frame work<br>with . Outer face having 9mm thick heavy duty fiber cement board confirming to IS 14862:2000, category<br>IV type A (High pressure steam cured) as per standard sizes fixed with self drilling / taping screws / fasteners @ 60cm c/c of approved make. .(cost of frame work to be paid for<br>separately).

13.26 : Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

14.85 : Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.

od1233955/2021_2022 : FIxing Departmental Door frame inside a new opening made as directed by engineer in charge

14.1.1 : Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand)

10.16.1 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

od1581207/2021_2022 : Providing and fixing precoated galvanised iron profile sheet ( size shape and pitch of corrugation as aproved by the engineerin charge) 0.35mm(+0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS 277, in 240mpa steel grade 5-7 micronsepoxy primer on both sides of the sheet and polyster top coat 15-18 microns.Sheet should have protective guard firm of 25 microns minimum to avoid scratches during transportationand should be supplied in single length up to 12 metreor as desired by Engineer in charge.The sheet should be fixed using self drilling/self tapping screws of size (5.5 x5.5.mm) with EPDM seal complete to any pitch in horrizontal/ vertical or curved surfaceexcluding the cost of purlins, rafters and trusses and including cutting to size and shape whwereever required

od1581227/2021_2022 : Supplying and fixing 15cm Square PVC gutter including MS falt supports @ 1m interval etc complete

50.18.9.2.2 : Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 20 mm dia 10 Kgf/cm2

50.18.9.17.1 : Providing and fixing PVC pipes including fixing the pipe with clamps/ clip at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 6 Kgf/cm2 - External work - Exposed on wall

od1581605/2021_2022 : Supplying and pasting Plastic Sticker letters on Information Board

ABDUL RAHEEM M

GREGORY.C

SAI CONSTRUCTIONS

Bidder Name

K.MUJEEB

SAI CONSTRUCTIONS

GREGORY.C

ABDUL RAHEEM M