Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.0 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹30.0 L+₹1,076 (0.04%)Rejected-AOC | L2 | Rejected-AOC L2 |
Tender Value
₹30.0 L
EMD Value
₹50,000
Closing Date
20 Apr 2020, 5:00 pmClosed
EXECUTIVE ENGINEER
PWD ELECTRONICS DIVISION THRISSUR
Supply,installation, testing and commissioning of EPABX System at Govt. Chest Hospital, Mulankunnathukavu, Thrissur
2020_PWD_351258_1
73/EEELCSTSR/2019-20/S
Open Tender
Miscellaneous Works
Item Rate
180 days
THRISSUR
Please refer Tender documents.
7 documents required · 7 mandatory
₹2,750
online
₹50,000
25 Jun 2020
17 Mar 2020
23 Apr 2020
17 Mar 2020
20 Apr 2020
17 Mar 2020
Amount
PART- A
Supply ,installation and commissioning of EPABX System compatable for existing EPABX installed at Medical College Hospital expandable up to 1000 ports equipped with, 12 trunk lines (P&T Lines), and 192 analog extensions, 1 ISDN PRI, 128 Channel IP Gateway Card, min. 14 slots, supporting min 448 ports, expandable type including software, and 25A SMPS based Float cum boost charger/UPS with battery bank as required for 6 hours working during power failures. Warranty: 5 year (Make: Coral /NEC/Panasonic)
Main Distribution Frame (MDF) 500 + 500 IDF Box with Original Krone make Module for 600 Pair
Supply and Installation of ADC Krone Make Over Voltage Surge Protection IPM Module with Earth Plate
36U Network Rack with all accessories. (Make Netrack/Valrack)
Analogue phones (DTMF) with glass epoxy coated printed board. (Model: Beetel B17/ Panasonic Kx-TS500/ equivalent)
Electronic Push Button telephones(DTMF) with CLI. (Model: Panasonic KX-TSC60SXB / equivalent)
Supply and Installation of RJ11 Rosette box on surface /in recess as per the site requirement, of approved make in good quality, in wall / column / wooden panel with shutter arrangement front plate to match the interior arrangement & making necessary connections, fixing arrangement. (Preferred Make: D-link/ equivalent)
Supply and Laying of 2 Pair PVC Telephone Cable of conductor size 0.51mm ATC Copper in the existing cable trays / PVC conduits / Oval Conduits / casing-n-caping etc. as required. (Preferred Make : Finolex / equivalent)
Supply and Laying of 10 Pair PVC Telephone Cable of conductor size 0.51mm ATC Copper in the existing cable trays / PVC conduits / Oval Conduits / casing-n-caping etc. as required. (Preferred Make : Finolex/ equivalent)
Supply and Laying of 20 Pair PVC Telephone Cable of conductor size 0.51mm ATC Copper in the existing cable trays / PVC conduits / Oval Conduits / casing-n-caping etc. as required. (Preferred Make : Finolex/ equivalent)
Supply, laying and commissioning of 50 Pair Polyurethane Insulated Jelly Filled armoured Telephone Cable of conductor size 0.51mm ATC Copper in the existing / cable trays / trusses / supporting system etc. as required. Make: Finolex /or equivalent
Supply, laying and commissioning of 100 Pair Polyurethane Insulated Jelly Filled armoured Telephone Cable of conductor size 0.51mm ATC Copper in the existing trench in the soil / built in trench / cable trays / trusses / supporting system etc. as required. Make: Finolex /or equivalent
Supply and Installation of Door type junction box with lock and fitted with KRONE make modules for 20 pairs.
Supply and Installation of Door type junction box with lock and fitted with original KRONE make modules for (50+50) pairs.
Supply and Installation of Door type junction box with lock and fitted withoriginal KRONE make modules for (100+100) pairs.
Supply and fixing of 25 mm PVC conduit/cape-n-case of approved model, with specials conforming to ISI standard on surface using suitable size fixtures, spacing not exceeding 60cm including making good the damages, colour washing etc
Supply and fixing of 20 mm PVC conduit/cape-n-case of approved model, with specials conforming to ISI standard on surface using suitable size fixtures, spacing not exceeding 60cm including making good the damages, colour washing etc
50 mm HDPE pipe
Supplying and providing of ISI plate earthing as per with 600 X 600 x 6mm GI/CI earth plate with required length of 20mm dia B Class watering Pipe, Providing GI funnel with weld mesh, filling required quantity of charcoal including construction of inspection chamber with a bed concrete of 1:4:8 PCC using 40mm broken stone(10 cm thick), brick work in cement mortar 1:6, plastering the surface of brick masonry and the exposed surface of PCC using bed with cement mortar 1:4, 12mm thick, (the finished inside dimension shall be 300x300x300mm), providing cast iron gully trap with GI covering at the top.
Earth lead supply and drawing 8 SWG bare copper conductors on the wall with necessary clamps with a spacing not exceeding 1 metre with necessary connections as required and tin plating on all ends and joints.
Preparing Schematic diagram of all equipments (EPABX) and cabling layout, operation manual, documentation details.
Dismantling of existing EPABX cables and conduits
6 PORT LIU,RACK MOUNT, 1U, Suffifient slots to accommodate LC duplex adapters, pigtails,Aluminum base material for light mounting, Should have Splice Tray & Cable Spool provision inside, Should have cable ties,mounting ear screw earthling and spiral wrap tube, Can Include 12 LC,6 SC,6 ST and 6 FC Terminations(Make: Molex/ Opterna)
1Mtr Fiber patch cord, OM3, LS0H, IEC and EIA/TIA compliant. Warranty: 5 year onsite. (Make: Molex/ Opterna)
Optical Transceiver, Single-mode 10GBASE -LR SFP Module, Interface :LC duplex (1310nm,10km), Industrial Temperature Range -40 to 85°C (-40 to 185°F) (Make:Ubiquiti/Cisco)
8-port Gigabit Switch with 2 Gigabit Fiber SFP uplinks, web based management, Bandwidth: 20Gbps full duplex or better, Warranty: 3 year onsite., Make: Netgear, Model: GS 110 TP/Cisco
Cat 6, 3 mtr Patch Cord. (Make: Molex/ Opterna)
Single mode 12 core fiber for outdoor use having standard: IEC 60793 / IEC 60794. (Make: Molex/ Opterna /AMP / Dlink)
Providing Trenchless excavation by Horizontal Directional Drilling consists GPRS survey of the route to be carried out on USER INSTRUCTIONS, Excavation of pits at entry and exit points as well as any other locations if required, Provision of HDD machine, skilled manpower, supervisor and other required tools and tackles and transportation from one location to other. Provision of fuel and engine oil. To refill evacuated pits after horizontal drilling is completed. HDD suitable for 50mm HDPE pipe through soil or rock, cable pulling, HDPE welding per joint including all other accessories as required.
COMPUTER CARE
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .