KIT OF BRAKE GEAR NYLON BUSHES

Special Eligibility Criteria

1. 1

   I/We engage to supply the Western Railway with the articles specified above upon the terms of the Indian Railway Standard Conditions of contract (latest revision) and upon the terms of the Revised Special Conditions and instructions for the guidance of the contracts issued by the Western Railway S/137/F Revised May 2011 Amendment No. 12 of August 2018.

   Confirmation required
2. 2

   Bulk procurement will be made from the sources approved by ICF. Approval status shall be reckoned as on the date of tender Closing and not thereafter, unless it is a case of removal/suspension/banning. Minimum 80% of the net procurable quantity shall be ordered on the ICF approved Regular vendors. Developmental order will be considered up to a maximum of 20% NPQ quantity on firms who have supplied tendered item to any of Indian Railway production unit or Zonal Railways provided they have submitted performance along with their offer in form of copies of Receipt Note, Inspection Certificate, Completion Report etc. Tenderers to note that non-submission of required documents shall be taken as they do not possess any past performance and/or capacity, and their offer is likely to be passed over as per extant rules and no back reference in this regard will be made to them.

   Document optionalConfirmation required
3. 3

   In case there are not more than three Indian suppliers categorized as approved vendor for a particular item, developmental vendors can be considered for placement of bulk order. While considering such vendors, Factors including past performance, Capacity , delivery requirements, quantity under procurement, nature of items, Outstanding order load etc. shall be considered , without any quantity restrictions subject to rates being reasonable. Quantity allocation among eligible vendors shall be based on pre- decided tender criteria. Such orders on developmental sources shall be treated as bulk orders.

   Document optionalConfirmation required
4. 4

   Procurement from (OEM s) manufacturers or authorized agent / dealer. 2.0 Either OEM should quote directly or OEM can authorize and give Tender Specific Authorization to its Agent / dealer to quote on their behalf. 2.1 The authorized dealer should submit valid tender specific authorization, along with the offer, failing which their offer will be liable to be passed over. 2.2 Trader / Authorized dealer should mention name of Manufacturer along with complete address for inspection of material at OEM Premises as per revised special conditions and Instructions for Guidance of Contractors.

   Document requiredConfirmation required

Check List

1. 1

   MSE : a] Please indicate whether you are registered with any of the following Micro & Small Enterprises (MSE) agencies : District industries Centres, KVIC, KVIB, Coir Board, NSIC, Diretorate of Handicraft & Handloom or any other body specified by Ministry of MSME.[Name the agency clearly] b] If you are registered with any of the above mentioned agencies, lease indicate the terminal validity date of registration and also indicate whether the Enterprise is owned by SC/ST.
2. 2

   MARKING : Manufacturer to mark his name and date of manufacture as per drawing, wherever indicted, or at a location where it may not get obliterated in service on the item being supplied by them against the purchase order. Supplies received without this are liable to be rejected by consignee.

Commercial-Compliance

1. 1

   Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

   Confirmation required
2. 2

   LIQUIDATED DAMAGE (LD) ON DELAYED SUPPLY: Recovery ofLiquidated Damage (LD) shall be levied @ 1/2% (half percent) of the priceof the store per week or part of the week during which delivery is acceptedand the upper limit for recovery of LD in supply contracts is 10%(tenpercent) of the value of contract irrespective of delays, unless otherwiseprovided, specifically in the contract.

   Confirmation required
3. 3

   Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

   Document optional

1. 1

   Payment Terms: No deviation from the Payment Terms stipulated in the tender is permitted.

2. 2

   Validity of Offer: No deviation from the offer validity period stipulated in the tender is permitted.