RequiredAnnual Turnover
RequiredOEM Annual Turnover Bid to RA enabled No Note: 1. OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product during the last three years
Requiredending on 31st March of the previous financial year
Requiredshould be as indicated in the bid document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant/Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the date of constitution/incorporation of the OEM is less than 3 year old
Requiredthe average turnover in respect of the completed financial years after the date of constitution shall be taken into account for this criteria. Crawler Hydraulic Excavator ( 2 pieces ) Technical Specifications * As per GeM Category Specification 1/11 Specification Specification Name Values Bid Requirement (Allowed Values) Generic Parameters Conforming IS/ISO 7135:2009 Hydraulic Excavator (Crawler) Yes Yes Make - * Model - * Type of the excavator Crawler * Operating mass 22500 Any applicable numeric value Shipping mass 22500 Any applicable numeric value Engine manufacturer and model - * Ignition type Diesel Diesel Type of cycle 4 Stroke 4 Stroke Aspiration mechanically turbocharged * No of cylinders 6 * Bore 102 * Stroke 120 * Displacement (cc) 5880 * Max Engine horsepower 140 More than 131.12 Or higher Maximum Engine torque (Nm@rpm) 571 537.4
Required556
Required564.8
Required571
Required655
Required695
Required873 Engine cooling system Liquid cooled * Type of fuel Diesel * Starter type - * Electrical system voltage (in volts) 24 * Bucket capacity to handle material of density 0.55 0.5
Required0.55 ISO net flywheel power at given engine speed (hp@rpm) 121 Any applicable numeric value Maximum swing speed 12 12
Required13.7 Reach at ground level 15490 14500.0
Required15490.0 Depth reach 11990 Any applicable numeric value 2/11 Travel speed 3.8 3.8
Required4.2 Gradeability (degree) 35 More than 35.0 Or higher Force at bucket curl at the Tip 57.1 Any applicable numeric value Stick crowding force 39.8 * Ground Pressure 0.51 * Operating weight 23100 More than 20600.0 Or higher Draw bar pull 166 * Standard Boom 8700 8095.0
Required8700.0 Standard Arm 6400 5785.0
Required6400.0 maximum digging depth 11990 More than 11050.0 Or higher maximum digging Reach 15600 More than 14500.0 Or higher Rated Lift Capacity 5650 Any applicable numeric value fuel tank capacity 343 Any applicable numeric value Certification Vehicle Certification ARAI/VRDE/ICAT No * If No
Requiredmention the name of Vehicle Certification agency - * Vehicle Certification name and date - * Compliance with pollution standards
Requiredsafety standards of components and road worthiness as per CMVR rules Yes * Availibility of test report for the product from Any ILAC/NABl accredited/central government lab to be furnished to buyers on demand Yes * Responsibility of Registration with RTO Yes * IS/ISO 6165 : 2006 Earth moving machinery - basic types - Identification and terms and definitions Yes * 3/11 IS 11114 : 2006 Earth- moving machinery - Definitions of dimensions and codes: Part 2 base machine Yes * IS 11114 : 2006 Earth- moving machinery - Definitions of dimensions and codes: Equipment and attachments Yes * IS13116 : 2006 Earth- moving machinery -Engine Test Code - Net power Yes * Construction Parameters Overall length 12545 * Overall width 2990 * Overall heigth 3025 * Overall transport length 12545 * Width of upper structure 2549 * Track overall length 4460 * Track overall width when retracted 2990 * Track overall width when extended 2990 * Track shoe width 600 * Centre to centre - idler to sprocket 3370 * Upper structure ground clearance 1079 * minimum ground clearance 494 More than 435.0 Or higher Tail swing radius (standard) 2825 * Tail swing radius (counterweight) 2825 * Backfill Blade height 0 * Backfill blade width 0 * Backfill blade rise above ground 0 * Backfill blade dig depth 0 * Maximum Cutting height 12660 * 4/11 Maximum Loading height 10450 More than 10450.0 Or higher Minimum Loading height 0 Any applicable numeric value Maximum vertical wall digging depth 10000 * Hydraulic pump system type - * Hydraulic pump flow at given pressure (L/hr) 26400 * Hydraulic pump flow at given speed (L/hr) 26400 * Hydraulic system fluid capacity 203 * Hydraulic system output 440 * Cooling systsem fluid capacity 25.5 * engine crankcase fluid capacity 19 * pump drive fluid capacity 440 * Swing reduction 110.73 * Swing circle lubrication - * Swing lock - * swing drive fluid capacity 5 * Filteration system - * Fuel filters - * Air Cleaners Yes * Type of Steering Power * Type of braking system Hydraulic * Type of final drive Planetary * final drive fluid capacity 5 * Type of Track - * Track dimensions 4460 * Ground Contact area 4.39 * Number of shoes on each side 49 * Number of carrier rollers 4 * 5/11 Number of track rollers 16 * Cab height 3060 * Crawler track height 885 * Clearance height under upper structure 1079 * Undercarriage overall width 2990 * Shipping height 3025 * Shipping height with guard rail 3025 * Shipping length 12545 * tail swing radius 2825 * Length to centre of rollers 2230 * Counterweight clearance 1079 * Right-side upper structure distance from axles of rotation 1274.5 * cab width overall 1040 * Track gauge with track extended 2390 * track gauge with track retracted 2390 * Crawler overall length 3660 * Sprocket axis to axis of rotation (in degress) 90 * Upper structure rearmost distance from axis of rotation 2825 * Maximum dumping height for shovel 10450 * Length of level floor cut 0 * Minimum level floor radius 0 * Muffler with rain cap Yes * Fuel Consumption for Earthwork application 17 * Maximum dig radius 11990 * Dig radius at groundline 15490 * Maximum dig depth 11990 Any applicable numeric value 6/11 Vertical straight wall dig depth 10000 * Dump height 10450 More than 10450.0 Or higher Overall reach height 12660 More than 12110.0 Or higher Bucket rotation 2760 * Arm digging Force 39.8 * Bucket Digging Force (ISO) 57.1 Any applicable numeric value Stick Digging Force (ISO) 39.8 Any applicable numeric value Bucket Digging Force (SAE) 57.1 * Stick Digging Force (SAE) 39.8 * Fully enclosed steel cabin with safety pipes window locking service doors and adjustable cushion seal Yes * Service hour meter Yes * Complete Instrumentation Yes * Starter key switch Yes * 2 working light and cabin light Yes * Electric Horn Yes * Parking brakes Yes * Emergency shut off Yes * Cabin/canopy :All round visible cabin
RequiredWith easy Walk Through Access Yes * Instrument Panel Yes * Cabin Instumental panel with audio indicators Yes * Cabin Instumental panel with visual indicators Yes * Seating Plan: Co- Adjustable driver seat with one helper seat Yes * Doors:-Front door with fixed toughened glass Yes * 7/11 & locking mechanism with wiper Glasses:-Front wind screen
Requiredrear glass in two pieces glass Yes * Paint:Standard automobile paint to the exterior body as per CVMR rules Yes * Rear view large convex mirror Yes * Front screen wiper Yes * Front and rear horn Yes * Number of roller 20 * Lift Path Yes * Cabin Entry and Exit Yes * Operation Control Yes * Length Without Attachment 5055 * Performance Parameters ISO net engine power (HP@rpm) 121 * Maximum travel speed (high) (km/hr) 3.8 * Maximum travel speed (low) (km/hr) 3.8 * Braking performance - * Tipping Load (kN) 75 Any applicable numeric value Digging Tool used Hoe * maximum force by Shovel/hoe/clamshell using arm cylinder (kN) 39.8 * maximum force by Shovel/hoe/clamshell using bucket cylinder (kN) 57.1 * Warranty time 1 * Operating hours during warranty period 2000 Any applicable numeric value Battery warranty 1 * No Of Free services 9 * Transportation charge (in Rupess) 200000 * 8/11 Maintenance cost for first 5000 Hrs (in Rupees) 600000 * Excavator Self propelled machine on crawlers having an upper structure capable of 360 degree swing and with mounted equipment which is primarily designed for excavating with bucket without movement of undercarriage during work cycle Yes * Work cycle normally compromised excavating
Requiredelevating
Requiredswinging and discharging of material Yes * * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer. Additional Specification Documents
