REPAIR AND MAINT OF JCOs ORs CDE and MES MD ACCN AT CR CAMP and MT COLONY AT IMA DEHRADUN

Amount

Taking down cement plaster of any description on brick/stone/concrete wall surfaces of any description including racking out joints hacking for key, scrubbing down with water etc. complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished surfaces even and smooth without using extra cement upto 10.5m height complete all as specified and as directed.

M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces or stone masonry in cement mortar 1:6 finished surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 10 mm thick on concrete surfaces of ceiling in cement mortar 1:3 finished surfaces even and smooth without using extra cement complete all as specified and as directed.

Demolition brick or stone masonary built in cement mortar including all quoins arches pillars etc but excluding ashlars facing dressed stone work and precast concrete block, complete all as specified and as directed.

M&L brick work with sub class 'B' brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 including all quoins, arches, pillars etc complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified and directed.

M & L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in window or door cill,lintel, benching to drain, holdfast, coping, bed block, posts, boundary pillars, bonders etc. and the like edge slightly rounded or chamfered angles and throating including necessary form work and demolition of existing concrete complete all as specified and directed.

Excavation in post hole (or similar holes) each n. exc 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers n. exc 25cm, watering and removing surplus soil to a distance n. exc 50m and making good surface in soft/loose soil complete all as specified and directed

M & L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation filling, mass concrete complete all as specified and directed.

S&F pre-painted galvalume aluminium Zinc coating GI based plain steel sheet to match with profile sheet in 0.50 mm thick of any colour having tensile strenth of 550 Mpa as in ridge, vally/gutter of roof , cladding to wall fixed with self tapping screws including dismantling of existing unserviceable sheet complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to walls etc fixed with self tapping screws including dismantling of existing unserviceable sheet complete all as specified and directed.

M&L for Second class hard-wood in scantlings, clean sawn timber framed and fixed with nails in framed work including dismantling of old unserviceable scantling complete all as specified and directed.

S&F MS Hollow tublar section as in column, main or cross beams, hip and jack rafter, purlins, roof trusses (Framed), vertical posts including MS angle cleats etc, where connected to common rafters and etc conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F framed work as in doors or gates of square/rectangular tubing mild steel angle or other section Fe 410 W Gde E 250 with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing with a shop coat steel primer complete all as specified and directed.

S&F Welded steel wire fabric weight not exc 4 Kg/Sqm fixed complete to wood or steel members including dismantling existing fabric of any description complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with stainless steel wire staples complete all as specified and directed.

S&F 4mm thick E-board false ceiling (Classic) including galvanised colour coated snap grid frame for false ceiling, size of grid 605 X 605mm fixed with 1.6 mm dia GI wire suspenders one end tied to roof members and other end connected to main tee of grid framework size of main tee 38mm X 25mmX 1.4mm, cross tee 38 mm X 25 mm X 1.4mm, angle along walls 38 mm X 25mm X 2.0 mm and including taking down existing boards any thickness including cover fillets etc complete all as directed.

M & L 75 mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection or similar places and finishing the surface even & smooth with out using extra cement including making joints 12mm wide to the full depth of PCC at every 3 meter and every change of direction and filling the same with mixture of bitumen & sand in ratio (1:1) by weight including necessary form work etc and including demolition of existing old cement concrete, complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete and sub base of floor including demolition of existing old cement concrete complete all as specified and directed.

M&L for Glazed ceramic coloured tiles of size 450x300x7mm thick, as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles fixed over and including rendering 10mm thick in CM 1:4 for receiving wall tiles including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

S&F non-skid coloured ceramic tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floors etc set and jointed in neat cement slurry and pointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles fixed over and including 15 mm thick screed bed in cement mortar 1:6 including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

S&F non-skid coloured ceramic tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles fixed over and including rendering 10mm thick in CM 1:4 for receiving wall tiles including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

S&F non-skid coloured ceramic tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles fixed over and including 15 mm thick screed bed in cement mortar 1:6 including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L for Vitrified ceramic tiles any shade 10 mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 sqm, laid in floors, set and jointed and pointed in white or coloured cement to match the shade of tiles fixed over and including 15 mm thick screed bed in cement mortar 1:6 including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L for Vitrified ceramic tiles any shade 10 mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 sqm, as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles fixed over and including rendering 10mm thick in CM 1:4 for receiving wall tiles including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M & L for machine cut kota stone slab flooring 18-20 mm thick, set and jointed with grey cement slurry mixed with pigment to match the shade of the slab laid over and including 20 mm thick screed bed in cement mortar 1:6 including rubbing and polishing and dismantling of existing stone slab flooring and rubbish off the premises complete all as specified and directed.

M & L for machine cut kota stone slab 18-20 mm thick, as in vertical surfaces set and jointed with grey cement slurry mixed with pigment to match the shade of the slab fixed over and including 10 mm thick rendering in cement mortar 1:4 including rubbing and polishing and dismantling of existing stone slab and rubbish off the premises complete all as specified and directed.

M&L for green marble work 18 to 20mm thick (table rubbed and polished) in cooking platforms, flooring, skirting, window cill & stepes fixed over and including 15mm thick screed bed / rendering in CM 1:6 complete all as directed.complete all as specified and directed.

Cutting and grinding of existing granite/kota stone floor (2 cut) on horizontal and vertical surface and finally finishing the surface uniformally by applying floor polish complete all as directed.complete all as specified and directed.

M & L for Rubberised precast concrete coloured interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade laid over and including 25mm thick sand cushioning layer including dismantling of existing damaged flooring complete all as specified and directed.

All as per item No.31 above but except paver blocks. (Old paver blocks obtained from dismantling shall be re-used)

M&L for 300x300x25mm thick (M-35) glossy finish polished red colour Chequered cement concrete tile of any pattern as decided by Engr-in-charge as in floors/pavings laid over and including 20 mm thick screed bed in cement mortar 1:6, set, jointed and pointed with white cement slurry mixed with pigment to match the shade of tile including dismantling of existing tiles with screed bed of any description and in any position complete all as specified and directed.

M & L for RCC (1:1½:3) type A-1, using 20mm graded crushed stone aggregate as in slab supported on walls beams and columns in floor, roof, landing and in shelves and the like including demolition of existing R.C.C complete all as specified and directed.

Use and waste of form work to soffits of supended slabs such as roof slabs, floor slabs, landings and similar works n.exc 200mm thick (Horizonal or slopping) for rough finished surface of concrete complete all as specified and directed.

M & L for Precast RCC 1:2:4 Type B-1 ( using 20 mm graded crushed stone aggregate} as in cover slab, set and jointed in CM 1:4 incl demolition of existing old RCC slabs of any description complete all as directed. (Note: Reinforcement shall be measured and paid separately under respective items of this BOQ)

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S & F 15mm bore medium grade steel water tubing, galvanized with and including all fittings and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing complete all as specified and directed.

S & F 20mm bore medium grade steel water tubing, galvanized with and including all fittings and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing complete all as specified and directed.

S& F in repair chromium plated Angle valve 15mm dia (angle cock) cast complete all as specified and directed.

S& F in repair 15mm dia pillar cock Super Delux with Aerator complete all as specified and directed.

S& F in repair 15mm bore long body bib tap chromium plated with wall flange complete all as specified and directed.

S& F in repair 15mm bore short body bib tap chromium plated with wall flange and aerator complete all as specified and directed.

S& F in repair Overhead shower round shape 100mm dia single flow (ABS body chrome plated with grey face plate) with revolving joints (with body rotation) & 115 mm long shower arm complete all as specified and directed.

S&F in repair 15mm bore stainless steel jet spray with 1.00meter long PVC tube complete all as specified and directed.

S&F in repair Vitreous china squatting pan, 'Orissa' pattern, size 580 x 440mm white, with integral foot rests including replacement of PVC 'P' or 'S' trap, concrete bedding and making good existing floor complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (padestal pattern), white including plastic water closet seat cover, white, closed pattern flat bottom and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S& F in repair PVC low level flushing cistern 10 Ltr capacity symphonic action type white including ball valve, float valve and handle including bracket and PVC flush pipe complete all as specified and directed.

S&F in repair plastic water closet seat cover, white, closed pattern flat bottom and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair Vitreous China wash basin, white, flat back, size 550x400mm including 32mm CP waste coupling, waste pipe, fixing brackets complete all as specified & directed.

S&F in repair sinks kitchen or laboratory made of stainless steel 1mm thick sheet with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S & F in repair brass chrominium plated tubular towel ring complete all as specified and directed.

S & F in repair brass chrominium plated tubular towel rail 20mm dia ,D type, 60cm long between flanges complete all as specified and directed.

S & F in repair Chromium Plated brass soap dish complete all as specified and directed.

S& F in repair 100mm dia chromium plated grating with/without hole complete all as specified and directed.

S& F in repair ball valve 20mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball min weight 210 gmscomplete all as specified and directed.

S& F in repair ball valve 15mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball min weight 142gms complete all as specified and directed.

S& F in repair 15mm bore gun metal globe/gate valves, with iron wheel head, screwed both ends for iron/GI pipe complete all as specified and directed.

S& F in repair 20mm bore gun metal globe/gate valves, with iron wheel head, screwed both ends for iron/GI pipe complete all as specified and directed.

S&F Stack clamps made out of 20mm X 2 mm flat iron and 16mm dia round iron stays, for fixing 100 mm bore pipe including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

S& F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with MS clamp including taking down existing pipes complete all as specified and directed.

S& F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with MS clamp including taking down existing pipes complete all as specified and directed.

S&F in repair PVC (SWR) bends in any radius 110mm bore complete all as specified and directed.

S&F in repair PVC (SWR) bends in any radius 75mm bore complete all as specified and directed.

S&F in repair PVC (SWR) floor trap 100mm dia, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair PVC (SWR) floor trap 75mm dia, plain with grating including jointing with solvent cement complete all as specified and directed.

Cleaning and removing all scale and dirt, etc. from over head water tanks and from mouths of circulating pipes of capacity exc 250 ltr but not exc 500 ltr vacumation, dewatering, desludging, rubbing internal surfaces with soft sponge & medium hard sponge to remove coglation with vinegar solution or light acid, drawing the tank by wet vaccume cleaner, disinfecting the internal surfaces with KMNo4 solution & drying it again with vaccume cleaner and marking the (Date of cleaning month & Year) on outer surface of overhead tank with synthetic enamel paint using stancils complete all as specified and directed.

All as per serial item No 67 here-in-before but capacity of water tanks exc 500 ltr and not exc 1000 ltr

S & F 500 ltr capacity Rotational moulded polythylene water storage tanks three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part I including dismantling/ taking out of old water tank & removing to where directed complete all as specified and as directed.

S& F 1000 ltr capacity Rotational moulded polythylene water storage tanks three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part I including dismantling/ taking out of old water tank & removing to where directed complete all as specified and directed.

S & F in repair PVC lid for PVC water tank with hinging device and locking arrangement of capacity 500 ltr to 1000 ltr with necessary nuts, bolts and washer etc complete all as specified and directed.

S&F in repair PVC connections 15mm size with PTMT length 600mm complete all as specified and directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area exc 1.5 Sqm but n.exc 4.0 Sqm each complete all as specified & directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area n.exc 1.50 Sqm each complete all as specified & directed.

Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each complete all as specified & directed

S & F Pressed steel frame of 105x60mm section for doors with one or more rebates including necessary fixing lugs, hinges, lock strikes plates etc including PCC 1:3:6 type C-0 using 12.5mm graded crushed stone aggregate as in back filling complete all as directed.

S & F Pressed steel frame of 165 x 60mm section for doors with one or more rebates including necessary fixing lugs, hinges, lock strikes plates etc including PCC 1:3:6 type C-0 using 12.5mm graded crushed stone aggregate as in back filling complete all as directed.

S&F Steel window factory made with side hung shutter including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed as per drg No TD 158 1/2 to 2/2 complete all as specified and directed

S&F Steel window factory made with centre hung shutter including hinges and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed as per drg No TD 158 1/2 to 2/2 complete all as specified and directed

S&F Steel ventilator factory made with centre hung shutter including hinges and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed as per drg No TD 158 1/2 to 2/2 complete all as specified and directed

M&L for aluminum alloy powder coated standard hollow section as mentioned below window frame (Bombay sliding) with two glazed shutter and one nos wire gauged shutter sliding type, with aluminum sections as per Series-A (15mm) 3 track of Jindal section numbers for sliding windows, and glazed with tinted glass coloured glass 5.5mm thick, fixed with glazing clips, rubber beading / gasket anodised beading, screw and lock type handle of size 75mm, etc complete all as specified and directed. Shutter Top & bottom size : 37.50x15x1.60mm Shutter inner lock size 37.50 x15 x1.60 mm Shutter side (Handle) size 37.50x15x1.36 mm Chowkhat bottom size : 75 x 26 x1.20mm Chowkhat top & sides size: 75 x 26 x1.20mm

M & L Powder coated aluminium Anodized frame for doors, windows, ventilators, partition wall with one or more rebates including joining cleat for fixing etc fixed in repair complete all as specified. (Minimum thickness of powder coating not less than 50 micron) complete all as directed

S&F for decorative aluminium grill weight not less than 3.13 Kg/Sqm (without frame) and 20x20mm aluminium cleat, screwed to main frame/fixed to wall with screws complete all as specified and directed.

S & F 5.5mm thick frosted/ tinted glass fixed in aluminium door/ window/ partition fixed with rubber gasket and aluminium beading complete all as specified and directed.

S&F Mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing and similar work complete all as specified and directed

M & L 30 mm thick flush shutter, ISI marked, solid core construction, with block board core and ply wood face panel commercial type on both side as approved complete all as specified & directed.

M & L 35mm thick 2nd class H.W. glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc(with sash bars) divided into squars, with plain chamfered or rounded, mitred and rebated sash bars, any numbers fitted with cut and mitered beads for securing glass/gauze etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed

S& F Factory made extruded WPC (Wood Polymer Composite) Double Door Frame solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantetc and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed .

S& F Factory made extruded WPC (Wood Polymer Composite) single Door Frame solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantetc and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed .

S& F Factory made single extruded WPC (Wood Polymer Composite) solid Moulded Flush Door Shutter both side laminated of 30 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800N (Face) & 90 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately

S& F Factory made extruded WPC (Wood Polymer Composite) single Door Frame solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 75 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantetc and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed .

S& F Factory made single extruded WPC (Wood Polymer Composite) solid Moulded flush door shutter both side laminated of 24mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately

S&F 35mm thick factory made solid WPC (Wood plastic composit) semi gauged door shutter with both side lamination, single pieces minimum density of 600 kg/cum with wire mesh in any number of division with (Frame size bottom rail 200 to 250mm wide ,middele or loc rail rail 150mm to 250mm wide, Stiles, top and freeze rails 100 to 120 mm wide and glazing bar 75 mm wide, including stainless steel wire mesh shall be fixed with 15 mm MS Square tube and covered with PVC moulded bedding in side rails with screwing 8x28 heat metal zink coated screws can be remove or fix again of the shall be as per manufacture instruction complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails ms frame shall be covered with heat moulded plain colour PVC "C" channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawing in SSR Part II 2010 etc complete all as directed.

S& F Butt hinges, 100mm long, medium weight, cold rolled, mild steel complete all as directed.

S&F stainless steel butt hinges, 100mm long, medium weight, complete all as specified and directed.

S & F 150mm long aluminium anodized handle cast type complete all as directed.

S& F 200mm long aluminium anodized barrel tower bolt of extruded section complete all as directed.

S & F 250mm long aluminium anosized sliding door bolt with hasp staple (bolt type) and fixing clips to sheet cast or extruded section of cast aluminium complete all as specified and directed.

Hacking out old broken glass pane of any thickness and size from wooden/metal frame including punching or drilling and glazing pins etc complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality type & glazing with wooden beads in squares not exc 0.5 Sqm in each pan, including hacking out old broken glass pane of any thickness and size from wooden/metal frame including punching or drilling and glazing pins etc complete all as specified and directed.

S & F Stainless steel curtain Rod Fancy type 25 mm Bore and 1mm thickness including a pair of brackets and decorative fancy type stainless steel finals fixed in repair complete all as specified and directed.

S & F in repair Stainless steel handles fancy type 100 mm size for kitchen cabinet shutters complete all as specified and directed.

S&F in repair Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs complete all as specified and directed. Make :Hexa, Hettich, Hafele

S &F in repair Chromium plated stainless steel wire basket (storage basket) pull out type for large utensils, size 480 x 500 x 150 mm of Grade 304 with necessary fixing clips etc complete all as specified and directed. Make :Hettich, Hafele, Butterfly

S &F in repair Chromium plated stainless steel wire basket (cup and saucer basket) pull out type, size 380 x 500 x 100 mm Grade 304 with necessary fixing clips etc complete all as specified and directed Make :Hettich, Hafele, Butterfly

S &F in repair Chromium plated stainless steel wire basket (plate basket) pull out type, size 380 x 500 x 100 mm Grade 304 with necessary fixing clips etc complete all as specified and directed. Make :Hettich, Hafele, Butterfly

S &F in repair Chromium plated stainless steel wire basket (cutlery basket) pull out type, size 380 x 500 x 100 mm Grade 304 with necessary fixing clips etc complete all as specified and directed.. Make : Hettich, Hafele, Butterfly

S &F in repair Chromium plated stainless steel wire basket (Grain Trolley) pull out type, size 480 x 500 x 200 mm Grade 304 with necessary sliding frame structure, fixing clips etc complete all as specified and directed. Make : Hettich, Hafele, Butterfly

S &F in repair Chrome plated stainless steel wire basket (Bottle pull out) pull out type two self, size 120 x 500 x 432 mm with necessary sliding frame structure, fixing clips etc complete all as specified and directed. Make : Hettich, Hafele, Butterfly

S&F 18mm thick prelaminated colour WPC Board having base brown, minimum density of 600 kg/cum, for kitchen cabinet Shutter/ drawer Front, cup board shutters, frame etc complete all as specified and directed.

S&F 18mm thick WPC Board having base brown, minimum density of 600 kg/cum, for kitchen cabinet Shutter/ drawer Front, cup board shutters, frame etc complete all as specified and directed.

S&F Magnetic catcher suitable for cup board shutter fixed with scews in bath cabinet or similar situations, complete all as specified and directed.

Repairing to existing door/ window chajjas, roof slab bottom upto 3.0m span and width 1.0m by demolition/ scrapping of damaged portion and preparing the surfaces by providing 50mm thick cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate including finishing the surface by rendering 10 mm thick plaster in CM 1:3 and finished even and smooth surface using extra cement over concrete surface and PCC benching including weathering sliglitely rounded or chamfered angles and throating over and including priming newly plastered/concrete surface by applying one coat of primer, 2 mm thick acrylic damp proof wall care putty and applying two coat of Apex paint (Weather coat exterior paint) and complete making good existing disturbed surface all as specified and directed (work to be carried out upto a height of 7.5 m and rate shall be inclusive of all necessary scaffolding and shuttering). Note: Reinforcement if required shall be measured and paid separately under respective item of BOQ.

Taking down existing broken portion of upward/ inverted facia or roof slab or visible concrete reinforcement of any thickness and shape and surface area exc 0.50 Sqm but n exc 5.0 Sqm and repaired by providing cement concrete 1:2:4 type B1 (using 12.5 mm graded stone aggregate) mixed with quick setting adhesive inclusive of all necessary reinforcement / mesh and other material including finishing the surface by rendering 10 mm thick plaster in CM 1:3 and finished even and smooth surface using extra cement over concrete surface and PCC benching including weathering slightely rounded or chamfered angles and throating over and including priming newly surface with application of one coat of primer, 2 mm thick acrylic damp proof wall care putty and applying two coat of Apex paint (Weather coat exterior paint) and complete making good existing disturbed surface all as specified (work to be carried out upto a height of 7.5 m height and rate shall be inclusive of all necessary scaffolding and shuttering) . Note: Reinforcement if required shall be measured and paid separately under respective items of this BOQ)

Taking down existing broken portion of upward, dowanward / inverted facia or roof slab stair slab , stair beam or visible concrete reinforcement of any thickness and shape and surface area n. exc 0.50 Mtr wide repaired by providing cement concrete 1:2:4 type B1 (using 12.5 mm graded stone aggregate) mixed with quick setting adhesive inclusive of all necessary reinforcement / mesh and other material including finishing the surface by rendering 10 mm thick plaster in CM 1:3 and finished even and smooth surface using extra cement over concrete surface and PCC benching including weathering slightely rounded or chamfered angles and throating over and including priming newly surface with application of one coat of primer, 2 mm thick acrylic damp proof wall care putty and applying two coat of Apex paint (Weather coat exterior paint) and complete making good existing disturbed surface all as specified (work to be carried out upto a height of 7.5 m height and rate shall be inclusive of all necessary scaffolding and shuttering) . Note: Reinforcement if required shall be measured and paid separately under respective items of this BOQ)

M&L for Mild steel TMT bars 8mm dia bent to shape required including cranking bending and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as directed.

M&L for preparation of old painted steel cupboard with 90mm sander machine of any description and applying one coat of synthetic enamel spray painting with approved shade over a coat of NC Putty and making desired pattern complete all as specified and directed.

M&L for complete removing of existing treatment from wall / ceilling by using machinary complete all as specified and directed.Note:-(work to be carried upto a height of triple storeyed bldg )

M&L for prepration of scrapped / new surface of wall / ceilling and applying 1 to 1½ mm thick damp proof wall care putty in two coats as per manufacturer's instruction complete all as specified and directed. Note:-(work to be carried upto a height of triple storeyed bldg )

M&L for applying two coats of weather proof exterior emulsion paint (Apex of Asian, weather coat of Berger) of ant tint over a priming coat on wall, chajjas, facia etc with mechanical spray mechine complete all as directed. Note:-(work to be carried upto a height of triple storeyed bldg )

M&L for prepration of scrapped / new surface of wall / ceiling and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil emulsion distemper on walls complete all as specified and directed

M&L for preparation of old painted wooden surfaces of any description, over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed

M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed

M&L for preparation of old plastered/unplastered surfaces of wall and applying one coat of weather exterior emulsion paint (Apex of Asian Paint / Weather proof of berger) on walls complete all as directed.

M&L for preparation of new steel surfaces of any description, over 10 cm in width or girth and applying two coat of synthetic enamel paint with approved shade over one coat of red oxide primer complete all as specified and directed

M&L for preparation of new wood and wood based surfaces of any description, over 10 cm width or girth and applying two coat of synthetic enamel paint with approved shade over one coat of pink primer complete all as specified and directed

S & F Mild steel door shutter two leaves with frame of 1 mm thick MS steel (all around) and leaves of 1.00 mm thick MS steel all as per Godrej Pattern with three way locking arrangement with brass lock and C P handle with duplicate keys including two costs of spray painting over a coat of red oxide primer complete in existing cup boards fixed with necessary nut bolts including embedding in PCC 1:2:4 incl taking down existing chowkhats or frame with shutters complete all as specified and directed Note.- Area of opening shall be measured

Taking down steel window shutter n.exc 1sqm and refixing in the same opening after replacement of broken hinges & wire mesh including welding,reveting , grinding, painting etc each complete all as specified and directed Note: (Wire mesh shall be measured and paid separately under respective items of this BOQ).

M&L for preparing surfaces holding the members in true position and welding in reparis n. exc 2.5 cm in length, thickness of metal to be welded exc 9 mm and nexc 20 mm complete all as specified and directed

M&L, for PCC 1:2:4 , type B-0 ( using 12.5mm graded crushed stone aggregates) as in roof padding in chimni portion, laid in proper slope and finished fair and even complete all as specified and directed.

M&L, for cutting out cracks to V-section, 15mm X 15mm on existing roofs or terracing, cleaning out, wetting etc and filled solidly with Sika cracksil or Dr Fixit 201 Crack X paste or, Asian paint Smart care crack seal as per manufacturers instructions, finished the roof suface properly, all complete as specified and directed.

Taking down of existing sunken slab treatment including demolition of sub base concrete of any description form the sunken portion and cleaning the surfaces by washing down with water and rubbish off the premises and treated the sunken portion as per following specifications:- (a) Cleaning and filling crevices, cracks and undulations by applying cement sand mortar mixed with SBR latex polymers of make- Dr fixit Pidicrete URP or equivalent of Sika or STP Ltd as per recommendations of manufacturer and then brushing the entire floor and walls of sunken area with neat cement slurry @ 3.00 kg/ sqm and laying 30mm average thickness of plain cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) over sunken slab portion in required slope and finishing the top surfaces even and smooth using extra cement . (b) Provision and fixing of 50mm dia PVC pipe as spout, projection 150mm beyond outer face of the wall of sunken floor to drain out water. (c) Apply two coats of acrylic cementitious water proofing coating resin base 2K, manufactured by M/s Pidilite industries Ltd, STP Ltd, Sika or equivalent make as approved by GE as per manufacturer recommendations on floor and all around wall surfaces dulyv sanding with dry coarse clean sand in second wet coat of 2K to make rough surface to receive plastering all as directed. (d) Laying a protective coat of 15 mm thick rendering in cement mortar 1:3 mixed with liquid water proofing compound @ 200ml per 50 kg cement or as per manufacturers instruction, of approved make on all surfaces of sunken area including vertical wall upto 450mm height, after preparations as mentioned above. Method of application for acrylic cementitious water proofing coating shall be followed as per manufacturers instructions. Note :- PCC sub base for filling under floor over treated sunken floor sufaces upto required level shall be measured and paid seperately under respective item of BOQ.

M & L for PCC 1:5:10 type E- 2, using 40 mm graded stone agg as in foundation, filling, mass concrete and filling under floor over treated sunken floor sufaces including demolition of existing old concrete complete all as specified and directed.

M&L for roof treatment through manufacturer /authorized applicator of the manufacturer as approved by GE by A coat of cold applied bituminous primer over cleaned surface @ 0.30 Kg/Sqm and applying one coat of hot blown bitumen 85/25 grade @ 1.20 Kg/Sqm followed by APP modified five layer polymeric membrane 3mm thick, minimum weight 3.60 kg/sqm reinforced with polyester non-woven fabric (weighing not less than 150 gms/sqm) manufactured by authorised manufacturer specified in particular spicification, laid as per the manufacturer instruction with side over lap of 75mm & end over lap of 100mm & tucked into the chases on vertical surfaces and applying one coat of hot blown bitumen 85/25 grade @ 1.20 Kg/Sqm finally finished with bituminous aluminum paint @ 0.20 Kg/Sqm complete including taking down existing roof treatment the RCC slab, cleaning off all foreign material by wire brushing, cleaning off surface and removal of spoil to a distance exc 500m complete all as specified and directed. Note-1 :- Work shall be executed by authorised applicator and upto roof height of double storied building.

Demolition carefully old Chimny incl RCC cover over double storey RCC roof etc in any position, carefully removing demolished material from roof, making good existing roof surface including water proofing treatment and removal of debris out side MD land complete all as specified and directed.

Demolition carefully old RCC Chimny inside portion over cooking plateform in any position, carefully removing demolished material, making good existing wall surface including plastering and removal of debris out side MD land complete all as specified and directed.

Demolition carefully old RCC water tank incl RCC base beam over double storey RCC roof (cutting reinforcement as required to facilitate demolition) etc in any position, carefully removing demolished material from roof, making good existing roof surface and removal of debris out side IMA MD land complete all as specified and directed.

Attending complaints like leakge of taps, angle valve stop coks or in pipes, fitting and removing of plumbing fittings such as Bib taps , pilllar taps, GI tubing , stop cocks, angle vales, float valves water tanks, gratinsgs, traps , WCs flushing cistern, waste pipes, WHBs, EWCs and similar work for continuity of essential internal water supply/sanitary services by employing an experienced team of plumbers and helpers to restore the exiting/services to the satisfaction of Engineer-in-Charge. Note :- (i) T&P including convence to reach door to door for attending the jobs will be provided by the contractor. (ii) Material will provided by seggregation of complaints (72 Hours/3 days/15 days/30 days) to the contractor and will be seperatly measured & paid as per item below. (iii) The complaint slip will be collected from complaint cell incharge/JE(Civ) by the contractor or high authority rep in writing. (iv) The area/Location of of Job will be all MD and OTM accn in AOR of AGE B/R-I. (v) If any complaint not attended by contractor with in 24 hours he will be liable for penalty/recovery of Rs.150 per complaint.Amount will be deducted from running payments/Final bill.

Attending complaints related to carpenter work and obtaining completion from user including repair/easing of doors re-fixing or tightening of doors, windows, resecuring of door/window wire guage, (fixing only) builders hardwares, helical door spring including use of all types of nails, screws etc which are required to make good the work, use of any other stores/fittings shall be paid seprately under Supply only items in building to continuity of essential carpentry service by employing a team of experienced carpenters with a helpers to restore the existing service to the satisfaction of Engineer-in-Charge. All as directed T&P for attending the job will be provided by the contractor. Note :- (i) T&P including convence to reach door to door for attending the jobs will be provided by the contractor. (ii) The complaint slip will be collected from complaint cell incharge/JE(Civ) by the contractor supervisor. (iii) The area/Location of of Job will be all MD and OTM accn in AOR of AGE B/R-I. (iv) If any complaint not attended by contractor with in 48 hours he will be liable for penalty/recovery of Rs.150 per complaint.Amount will be deducted from running payments/Final bill.

Attending complaints related to Cleaning of blocked WC seat of pedestal/ squatt pattern floor trap of bath room & kitchen upto Ist manhole and making the drain pipe of any size full fuctional by flushing with water to entire satisfaction of engr-in charge including cleaning of 1st manhole and removing the waste material/sludge etc to a distance n. exec 300m and burning the same in pits complete all as specified and directed by Engr-in -charge. T&P for attending the job will be provided by the contractor. Note :- (i) T&P including convence to reach door to door for attending the jobs will be provided by the contractor. (ii) Material will provided by department through maintanace cell and neccessary salvage/unused material deposit back to complaint cell incharge/JE(Civ). (iii) The complaint slip will be collected from complaint cell incharge/JE(Civ) by the contractor supervisor. (iv) The area/Location of of Job will be all MD and OTM accn in AOR of AGE B/R-I. (v) If any complaint not attended by contractor with in 24 hours he will be liable for penalty/recovery of Rs.100 per complaint.Amount will be deducted from running payments/Final bill.

Attending complaints related to black smith work and obtaining completion from user for resecuring/easing/minor repair to make functional of steel doors, steel windows, steel rolling shutter and gates etc by greasing,oiling & cleaning and changing of required fittings, fixtures & compnents etc by employing experienced Black smith with a helper to restore the existing service to the satisfaction of Engineer-in-Charge by using store issued by the Dept..All as directed T&P for attending the job will be provided by the contractor. Note :- (i) T&P including convence to reach door to door for attending the jobs will be provided by the contractor. (ii) Material will provided by department through maintanace cell and neccessary salvage/unused material deposit back to complaint cell incharge/JE(Civ). (iii) The complaint slip will be collected from complaint cell incharge/JE(Civ) by the contractor supervisor. (iv) The area/Location of of Job will be all MD and OTM accn in AOR of AGE B/R-I. (v) If any complaint not attended by contractor with in 24 hours he will be liable for penalty/recovery of Rs.150 per complaint.Amount will be deducted from running payments/Final bill.

Taking down existing aluminium/copper surface/concealed point wiring (light, fan, socket or power point) complete including fitting such as switches, ceiling roses, regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, holders and making good the disturbed surfaces in CM 1:3 of walls, floors, ceiling etc including distempering to match with existing surfaces complete.

S & F sub replacement main wiring with PVC insulated unsheathed FRLSH cable 1100 Volt grade, with multi stranded copper conductor drawing in and including rigid PVC conduit in concealed / surface as required at site including one run PVC insulated unsheathed cable with multi stranded copper conductor colour code as a earth continuity and connected upto DB including taking down old unsv submain wiring of following sizes . Note: (i)Two/Four run of single core PVC cable with one run of earth conductor & condiut shall be measured as one unit. (ii) The quoted rates shall be deemed to be inclusive for fixing the conduits to surface with using PVC rawl plugs etc. (iii) Phase colour code must be follow i.e Phase( Red) and Neutral ( Black) In colour and for three Phase RYB For phase and black for neutral.

2 x 10 Sqmm + 1 x 10 sqmm

2 x 6 Sqmm + 1 x 6 sqmm

2 x 4Sqmm + 1 x 4 sqmm

2 x 2.5Sqmm + 1 x 2.5 sqmm

S & F in replacement Distribution boards epoxy powder coated TP & N (VTPN MCCB DB) fabricated from minimum 1.6 mm thick CRCA sheet and fixed/ flush to wall with suitable size fully insulated copper Bus Bar for each phase and 02 neutral shrouded bar ,2 earth bar and cable tie for cable management with reversible door for IP-43 protection,415 volt and suitable for fixing FP MCCB of suitable capacity as incomer and combination of SP/TP MCBs as outgoings of following capacity . Note: Suitable MCCB and outgoing MCBs will be measuredand paid separately under relavant items of this schedule.

4 Way VTPN DB

8 WAY VTPN DB Cat No 507747

S & F in replacement MCCB, 4 pole ICS=100% ICU at 415 volts with thermal-magnetic release and adjustable overload setting of following capacity .

100 Amps with rupturing capacity 16 KA

125 Amps with rupturing capacity 16KA

160 Amps with rupturing capacity 25 KA

S & F in replacement MCB SP 240 volts 'B' Curve 10 KA . including connection with suitable size copper lugs of following capacity

MCB SP 6 to 32 Amp 240 volts

MCB SP 40 to 63 AMPS 240 volts

MCB SPN 6 to 32 Amps 240 volts

MCB SPN 40 to 63 Amps 240 volts

S & F in replacement sheet metal enclosure, single pole and neutral with two pin and earth plug and socket with and including one single pole MCB 20 Amps, complete all as directed.

S & F in replacement MCB DB, sheet metal enclosures double door .The DBs should be supplied with tin platted insulated copper bus bar rated for 100A. 240 volts with IK09 type with blanking plates where required and IP 43 degree protection of following size:-

4 way SPN DB.

8 way SPN DB.

12way SPN DB

16 way SPN DB

Material and labour for point wiring in replacement with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH having multi stranded copper conductor of 1.5 sq mm nominal cross sectional area drawn in non rigid PVC concealed conduit not less than 25mm dia with all fitting and fixing accessories and 1.5 sq mm PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to earth dolly by providing suitable lugs with & including Modular metal flush boxes 1.6 mm thick, upto 60 mm deep of required size factory made for mounting modular switch, regulators etc with inner /outer cover and frame (white) ISI marked, fixed with brass screws for the following. Note: (i) The quoted rates shall be deemed to be inclusive for making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. (ii) Point wiring & earth wire shall be connected to each & every sunken box.

One light point controlled by one, one way switch 5 Amps

One fan point point controlled by one, one way switch 5 Amps .

One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board.

One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

One bell point controlled by one, bell switch 5 Amps

All as per item No.151 above but with stranded copper conductor 4 Sq mm (nominal area), two single core, PVC insulated cable 1100 Volt grade ISI marked for 3 pin, 15 Amp socket outlet, independent, including PVC insulated stranded copper conductor 4 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly.

S & F replacement fan regulator modular step type 120W 240 volts 2 module type complete.

S & F in replacement Modular switch single pole one way 6 Amp ..

S & F in replacement Modular switch single pole one way 16 Amp.

S & F in replacement Modular socket outlet 2/3 pin combined 6 Amp 240 volts .

S & F in replacement Modular socket outlet 2/3 pin combined 16 Amp 240 volts .

S & F in replacement Modular bell push flush type, 5 Amps .

S & F in replacement Electric ding dong bell 230 volts AC .

S & F in replacement Bell push flush type, 5 Amps .

S & F in replacement ceiling rose, 63.5 mm dia, ISI marked, three terminal of polycarbonate/isolated body .

S & F in replacement Electronic steppped type fan regulator 100 watt 230 volts AC 50 Hz.

S & F in replacement Batten holder, PVC/polycarbonate type with back plate suitable for batten fittings .

S & F in replacement switch piano, flush type, single pole one way 6 Amp .

S & F in replacement switch piano, flush type, single pole one way 16Amp .

S & F in replacement socket outlet, multipurpose, 2 in 1, 5 pin, 6 Amp.

S&F in replacement socket outlet, multipurpose, 2 in 1, 5 pin, 16 Amp with fuse and neon indicator .

S & F in replacement Electronic dimmer type fan regulator 120 watt 230 volts AC 50 Hz

S &F in replacement Bakelite sheet cover 3 mm thick cut as required shape and size including brass screws and cup washer off following size for mounting swich, socket fan regulator .

S & F in replacement cable 2 core 23/76 multi stranded copper conductor white/ black colour code .

S&F in replacement Exhaust fan 300 mm sweep, 900 RPM, ,made up of Sturdy Engineering Plastic complete ,voltage 230 Volts ,50 Hz, energy saving model single phase copper wound motor, white in colour complete with blade, box type louvers etc. complete all as specified and directed. (Old fan will be deposited in AGE E/M store yard of GE IMA) by the contractor.

Material and labour in replacement for Earthing complete with galvanized iron earth plate electrode 600 mm x 600 mm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test point & to main switch board and testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc. GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI light grade earth lead protection pipe etc complete all as specified and directed. Note: (i) Earth lead wire and its protection pipe upto and including 7.5 mtr from the top of earth electrode are included under this item. (ii) Any joints in earth lead from earth electrode to test point shall not be allowed/permitted.

S&F in replacement Rigid non metalic PVC conduit inclusive of boxes (junction/terminal) all tees, bend, elbow, reducers, bell mouth tube ends and fixing acessories such as couplers, lock, nut saddles, pipe hooks complete all as specified and directed for following dia of pipe:-

25mm dia

20mm dia

Supply and fix in replacement PVC Casing Caping inclusive of all tees, bend, elbow and fixing acessories including taking down old unsv pvc casing caping for the following size:-

S & F in replacement sheet metal enclosure, Triple pole and neutral with three pin and earth plug and socket with and including one triple pole MCB 32 Amps, 415 volts,10 KA complete all as specified and directed.

S&F in replacement Exhaust fan 250 mm sweep, 900 RPM, ,made up of Sturdy Engineering Plastic complete ,voltage 230 Volts ,50 Hz, energy saving model single phase copper wound motor, white in colour complete with blade, box type louvers etc complete all as specified and directed. (Old fan will be deposited in AGE E/M store yard of GE IMA) by the contractor.

M & L for taking down unsv ceiling fan of size 1200/1400mm sweep from any height and carry to local workshop for rewinding the fan with super enameled copper wire of suitable gauge including replacement of spare parts like down rod, clamp, bearing, rubber reel, Split pin, Fan Canopy, fan Cover, fan condensor, painting and refixing complete all as specified and directed.

S&F in replacement high prssure die cast alluminium LED Batten light fitting 20W,125 lumens /watt, IP-20, colour temp not less than 6500, inbuilt electronic driver, PF not less than 0.90, inbuilt surge protection minimum 2.5KV complete all as specified and directed.

S&F in replacement high prssure die cast alluminium LED Batten light fitting 10W,100 lumens /watt, IP-20,colour temp not less than 5700, inbuilt electronic driver, PF not less than 0.90 , inbuilt surge protection minimum 2.5KV complete all as specified and directed.

S&F in replacement LED up down twin glow 20w+20w Batten light fitting 20W, not less than 100 lumens /watt, IP-20, colour temp not less than 5700 down side and 3000 up side, inbuilt electronic driver, PF not less than 0.90 inbuilt surge protection minimum 2.5KV complete all as specified and directed.

S&F in replacement CRCA body LED 1x1 surface/Recss mounted light fitting 18W, not less than 100 lumens /watt, IP-20, colour temp not less than 6500, inbuilt electronic driver, PF not less than 0.90, inbuilt surge protection minimum 2KV complete all as specified and directed.

S&F in replacement high pressure die cast aluminium LED secutiy light fitting 25W, not less than 100 lumens /watt, IP-66 colour temp not less than 6500, inbuilt electronic driver, PF not less than 0.90 , inbuilt surge protection minimum 4 KV complete all as specified and directed.

S&F in replacement CRCA body LED 2x2 Recessed/Recess Mounted light fitting 36W, not less than 100 lumens /watt, IP-20 colour temp not less than 6500, Inbuilt electronic driver, PF not less than 0.90 , inbuilt surge protection minimum 2.5 KV complete all as specified and directed.

S&F in replacement Aluminium die cast body bulk head surface mounted LED fitting 10W, not less than 100 lumens /watt, IP-66 colour temp not less than 6500, Inbuilt electronic driver, PF not less than 0.90 , inbuilt surge protection minimum 4 KV complete all as specified and directed.

S&F in replacement Aluminium die cast body LED flood light fitting 50W, not less than 100 lumens /watt, IP-66 colour temp not less than 6500,inbuilt electronic driver, PF not less than 0.90 inbuilt surge protection minimum 4 KV complete all as specified and directed.

Supply and fix in replacement industrial hanging bed switch 5/6 Amps ,230 Volts complete all as specified and directed.

S& F in replacement bed side reading lamp White in colour 4 Watt, connected the same with using PVC sheathed and insulated 3 core flexible copper conductor cable including all accessories and fixing arrangement complete all as specified and directed.

S&F in replacement Metal finish wall light with maximum bulb wattage 9 watt, base of the lamp should be E27, colour of the fixture is white & silver with chrome finish and having rectanguar shape for aesthetic look, connected the same with using PVC sheathed and insulated 3 core flexible copper conductor cable including all accessories and fixing arrangement complete all as specified and directed.

M & L for taking down unsv Exhaust Fan of size 350/450mm from any height and carry to local workshop for rewinding the exhaust fan with super enameled copper wire of suitable gauge including replacement of spare parts like safety pin, condensor, rubber stud, fan blade, bearing, painting and refixing complete all as specified and directed.

S&F in replacement capacitor of 2.5 Mfd as per site requirement suitable for ceiling fan/ exhaust/cabin/table fan of any sweep complete all as specified and directed.

Alankar Traders (BID ID -3315860)

mohanlal gupta (BID ID -3323091)

M/S SEWA AND SERVE BUILDERS (BID ID -3323472)