Development of Park at 1 no. Ramkrishna Pally under Kamarhati Municipality ward no.30

Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm.

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

Cement concrete with graded jhama khoa (30 mm size) excluding shuttering In ground floor and foundation.

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (i) Pakur Variety

Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:6 cement mortar

For Paver block

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc

For Paver block

125 mm. thick brick work with 1st class bricks in cement mortar (1:3) in ground floor.

Supplying & laying as per IRC-SP:063-2004 paver unit of any shade of approved quality as per relevant IS code, laid in pattern as directed in pavement, footpath, driveway (paver block only), etc including necessary underlay complete in all respect with all labour and material. [Border concrete if necessary to be paid separately]

(B) Filling in foundation or plinth by fine sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)

Earth work in filling in compound, tank, low land, ditches etc. with good earth, in layers not exceeding 150 mm. including breaking clods and consolidating the same by ramming and dressing complete. (Payment will be made on profile measurement before and after the work)

Supplying, fitting & fixing true to line and level digital elevation Ceramic tiles of approved brand conforming to IS:15622:2006 Group B III and tested as per IS:13630:2006 as ornamental cladding on external wall in natural stone, brick, wood, bamboo pattern/ design fixed with adhesive 4.5 mm thick at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. With polymerised adhesive and epoxy grout pointing including spacer - 2mm (When tiles are laid over existing hard ready surface) all complete as per direction of Engineer-in-charge.

a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. (ii) Grill weighing above 16 Kg./sq.mtr and above

M.S. gate of Jail type as per approved design made of strong M.S. frame work, intermediate stiffeners and round / square bars or angles. M.S. sheet (not less than 14 gauge) gussets, cleats etc. including necessary riveting, bolting, welding, locking and hanging arrangements, fitting and fixing complete as per direction of the Engineer-in -charge. In ground floor. approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specification. In Ground floor: (iii) Two coats.

(a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc

(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :

Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface. Two Coats enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : With other than hi-gloss of approved quality- (b) On steel or other metal surface : With super gloss (hi-gloss) - iv) Two coats (with any shade except white)

Antique lron Eench :- Length - 6 Ft. Suitable to seat 3 or 4 adults comfortably. The frame should be made of lron and FRP 6 mm different designs permeably garden green colour. The sittinB area should be contoured designs. High quatity fastened complete with supply / fixing and installed to be groubnd including civil work for making base. MOC: iron, hollow section/frp batam clour: ASPA finish paint on 2 coats of primer. (AS per approved by E.E.(M.E.D- NORTH)

Sprial Slide Height:8 FT, FRP Sprial Slide len8th - 16 FT, AREA . 12'- 16' Structural parts made of ms tata puipes and MS Hollow section (includint cuttin& fitting, welding, Bolting and smooth grinding etc. complete). All the structural parts High quality fastened complete with supply/fixing and instaliation to ground includin g civil work. outer Diameter of Metal Parts - 50.3, 26-9 MM,Thickness of Metal Parts - min. 2.9mm, FRP thickness:6 mm to 8 mm, colour: multicolour ASPA finish paint on 2 coats of primer. (AS per approved by E.E.(M.E.D- NORTH)

SeaSaw-4seater SEAT MOC:FRP, Len8th - 9', HeiSht - 2', width - 2.5' Structural parts made of 60 mm Pipes, and MS Hollow section (including cuttinS, fitting, weld ing. Bolting and smooth grindint etc. complete). High Quality fastened complete with supply/fixing and installation to Bround including civil work for making base and pedestals. Outer Diameter of Metal Parts - 48.3.26.9, Thickness of metal Parts-min. 2.9 mm, colour:multi- colour ASPA finish paint on 2 coats of. (AS per approved by E.E.(M.E.D- NORTH)

Doll Sealy Merry Go Round Which provide complete enjoyment and fun to the kids. Owing to appealing desitns and superior finish, these merry go rounds are preferred by clients of all age goups. Furthermore, in order to faciliate our clients, we offer our entire product rante colour: multi-colour ASpA finishpaint on 2 caots of primer. at market lead ingprices Specifications: Area: 6' Dia (AS per approved by E.E.(M.E.D- NORTH)

Double Swing (Heavy Dury) Hei8ht:9.5 Ft., tength - 10,. Width - 5' The chain link should be plastic coated and take the load of 80 kg. The Assy. Of swing has to be heavy duly ball bearing. Struictural parts madfe of Ms pipes and MS Hollow section (including cutting, fitting, weldin& Boltint and smooth Brindint etc. complete) lnstallation to ground includlng civil work for making base and pedestals. Outer Diameter of metal parts - gg.9, Thickness of Metal parts-min. 2.9mm, seat MOC:FRP, colour: multi-colour ASpA finishpaint on 2 caots of primer. (AS per approved by E.E.(M.E.D- NORTH)

Supplying and Planting of different plant / trees ( Supplying well grown plants bushy and healthy, minimum height as specified i.e. exposed height including all leads & lift, carriage, handling, manuring, applying presticide and fertilizer etc.ii) Rangon chineese of size not less than 20cm

iv) Rangon hi-breed healthy plant.

viii) China palm of leaves 4-5 in earthen pots size 25cm

xix) Bougainvillea (name variety, bushy plants, full bloom) of height 90cm-60cm in cement pots of size 30cm

xxvi) Areca Palm 4 - 5 suckers of height 90 cm to 105 cm in earthen pots of size 25 cm

xxxi) Dracaena Green of height 30 cm to 90 cm in earthen pots of size 20 cm.

Supplying, fitting & fixing granite slabs 15mm to 18 mm. thick with uniform texture & without decorative veins in columns, wall, facia etc. with 15 mm thick [avg] cement mortar (1:2) including making suitable arrangements to hold the stones properly by brass / copper hooks including pointing in cement mortar (1:2) (1 white cement : 2 marble dust) with admixture of pigment matching the stone shades all complete as per direction of the Engineer-in-charge including cost of all materials, labours, scaffolding, staging ,curing and roughening of concrete surface complete. Area of each Granite slab > 0.6 upto 1.0 square metre. [Using cement slurry at back side of granite @ 4.4 kg/sq.m & white cement slurry for joint filling @ 1.8 kg/sq.m]

Please Enable Macros to View BoQ information