S.R To Government Polytechnic, Ambawadi, Ahmedabad. (Repairing and maintenance of plumbing work in various building of polytechnic campus.)

Name of work : S.R To Government Polytechnic, Ambawadi, Ahmedabad. (Repairing

and maintenance of plumbing work in various building of

polytechnic campus.)

Estimated Rates

Quanitites Total

estimated Amount

but may be Item of Work Unit according to

No. In Figure In Words

more or estimated

1 112.00 Dismantaling tiled or stone 47.72 Rupees Forty Smt

floors laid in mortar including Seven And

stacking of serviceable materials Paise Seventy

and disposal of unserviceable Two Only

materials with all lead and lift.

2 648.00 Dismantaling C.I pipes, Upvc, 74.77 Rupees Rmt

G.S.W pipes and A.C rain water Seventy Four

pipes with fittings and clamps And Paise

including stacking the materials Seventy

with all lead and lift (For any Seven Only

diameter of pipe)

3 112.00 Providing and laying Ceramic 1038.39 Rupees One Smt

tiles 6mm thick in skrting risers Thousand

of steps anddedoon10mm thick Thirty Eight

cement plaster1:3(1-cement :3- And Paise

coarse sand) and jointed with Thirty Nine

white cement slurry Only

4 15.00 Providing and fixng gun metal 420.63 Rupees Four NO.

check or non return full way Hundred

wheel valve (b) 25 mm diameter. Twenty And

5 10.00 Providing and fixing gun metal 663.43 Rupees Six No.

check or non return full way Hundred Sixty

wheel valve. (E) 40 mm dia. Three And

Estimated Rates

Quanitites Total

estimated Amount

but may be Item of Work Unit according to

No. In Figure In Words

more or estimated

6 30.00 Providing and fixing chromium 254.78 Rupees Two No.

plated brass half turn flush cock Hundred Fifty

of approved quality including Four And

fixing in pipe line etc. complete. Paise Seventy

(II) 20 mm diameter. Eight Only

7 80.0 Providing and fixing C.P. Bib cock 518.74 Rupees Five No.

15 mm Heavy duty with cap of Hundred

approved or equivalent brand as Eighteen And

per direction of Engineer In- Paise Seventy

charge etc. complete. Four Only

8 30.00 Providing and fixng pillar tap, 308.73 Rupees Three No.

capstan head, screw down high Hundred

pressure with screws, shanks Eight And

and back nuts. (I) 15 mm Paise Seventy

diameter. Three Only

9 20.00 Providing and fixing PVC SWR 571.08 Rupees Five No.

Nahni trap IS 14735 for drain - Hundred

100 mm diameter with jali of the Seventy One

following nominal diameter of And Paise

self cleansing design with C.I Eight Only

scread down or hinged grating

including the cost of cutting and

making good the walls.

10 80.00 Providing and fixing brass screw 223.81 Rupees Two No.

down stop Hundred

tap.(A) 20mm dia. Twenty Three

Estimated Rates

Quanitites Total

estimated Amount

but may be Item of Work Unit according to

No. In Figure In Words

more or estimated

11 80.00 Providing, laying and jointing in 831.22 Rupees Eight Rmt

true line and level 160 diametre Hundred

U.P.V.C (Type B) conforming to Thirty One

IS 13592-1992 with one end And Paise

plain and other end socketed Twenty Two

with rubberring,& fittings Only

conforming to ISI 14735-1999 of

approved make for drainage

system pipe line, pipe shall be

jointed with each other with

rubber lubricant, pipe shall be

fixed on wall using of PVC clamp

of the size 160mm diametrex

210mm length x196 mm heigh at

every 2000 mm center to center

or shall be concealed in wall as

directed including necessary

fittings such as bends, shoes etc.

including testing of pipes and

joints and jointedwith adhesive

solvent cement including cost of

Estimated Rates

Quanitites Total

estimated Amount

but may be Item of Work Unit according to

No. In Figure In Words

more or estimated

12 250.00 Providing, laying and jointing in 835.15 Rupees Eight Rmt

true line and level 110 diametre Hundred

U.P.V.C (Type B) conforming to Thirty Five

IS 13592-1992 with one end And Paise

plain and other end socketed Fifteen Only

with rubberring,& fittings

conforming to ISI 14735-1999 of

approved make for drainage

system pipe line, pipe shall be

jointed with each other with

rubber lubricant, pipe shall be

fixed on wall using of PVC clamp

of the size 110mm diametrex

149 mm length x145mm heigh at

every 2000 mm center to center

or shall be concealed in wall as

directed including necessary

fittings such as bends, shoes etc.

including testing of pipes and

joints and jointedwith adhesive

solvent cement including cost of

13 56.00 Repairing Existing Alluminum 1066.99 Rupees One Smt

extruded Fully / Partly glazed Thousand

sliding windows by replacing of Sixty Six And

old rusted rollers, replacing Paise Ninety

mosquito net, glass, hardware as Nine Only

per requirement & making good

& refixing shutters in position as

directed by Engineer In Charge.

Estimated Rates

Quanitites Total

estimated Amount

but may be Item of Work Unit according to

No. In Figure In Words

more or estimated

14 25.00 Providing and fixing jet spray 413.41 Rupees Four No.

heavy duty with S.S. Braided Hundred

hose 60 cm long with fitting. Thirteen And

15 10.00 Providing 4 mm thick bajri or 279.55 Rupees Two Smt

figure glass louvers for Hundred

vantilation as required size as Seventy Nine

directed by EIC. And Paise

Fifty Five Only

16 150.00 Providing laying and jointing in 91.84 Rupees Rmt

true line and level 25mm dia. Ninety One

U.P.V.C. Pipe ( SCH- 40) for cold And Paise

water including fittings as Eighty Four

approved by Engineer In Charge. Only

Pipe shall be fixed on the wall

with the help of clamp at every

two metre C/C or shall be

concealed as directed including

necessary fittings etc. including

testing of pipe and joints and

fixing the same with adhesive

solvent, including cost of all

17 15.00 Providing & fixing 50 mm U.P.V.C 847.90 Rupees Eight No.

Ball valve with proper fitting and Hundred

level. Forty Seven

Estimated Rates

Quanitites Total

estimated Amount

but may be Item of Work Unit according to

No. In Figure In Words

more or estimated

18 70.00 Providing & fixing 15 mm 118.47 Rupees One No.

nominal bore and 45 cm length Hundred

PVC connection pipe with Eighteen And

P.T.M.T. Nuts as approved or Paise Forty

equivalent brand as per direction Seven Only

of Engineer In-charge etc.

19 6000.00 Providing erecting and fixing 12.27 Rupees Litre

tripal coated (three layer) Syntex Twelve And

or equivalent PVC (ISI) water Paise Twenty

tank white color antibacterial Seven Only

tank of required capacity as

approved by engineer incharge .

with all necessary fittings and

connection etc. complete on

terrace with all lead and lift.

20 120.00 Providing laying and jointing in 195.67 Rupees One Rmt

true line and level 50 mm dia. Hundred

U.P.V.C. Pipe (SCH-40) for cold Ninety Five

water including fittings as And Paise

approved by Engineer In Charge. Sixty Seven

Pipe shall be fixed on the wall Only

with the help of clamp at every

two metre C/C or shall be

concealed as directed including

necessary fittings etc. including

testing of pipe and joints and

samewithadhesivesolvent,

including cost of all materials.

Estimated Rates

Quanitites Total

estimated Amount

but may be Item of Work Unit according to

No. In Figure In Words

more or estimated

21 60.00 Providing and laying and jointein 148.12 Rupees One Rmt

true line and level U.P.V.C. pipe Hundred

(SCH-40) for cold water Forty Eight

Including fitting of standard And Paise

make as approved by Engineer in Twelve Only

charge. Pipe shall be fixed on the

wall with the help of clamp at

every 2000mm center to center

or shall be concealed as directed

including necessary fittings,

testing of pipe and joints and

fixing the same with adhesive

solvent,including cost of all

materials (E) 40mm

22 60.00 Providing and fixing concealed 205.00 Rupees Two Rmt

center point to wall ceiling & Hundred Five

floor CPVC (SDR 13.5) PIPE Only

having National Sanitation

Foundation (NSF) seal for

potable water of following dia.

nominal bore tube fittings and

clamps including making good

the wall, ceiling and floor etc.

complete.[B] 20mm.

23 35.00 Providing and fixing C.P. brass 67.91 Rupees Sixty No.

waste for wash basin or sink. (A) Seven And

32mm dia Paise Ninety

24 70.00 Providing and fixing Waste Pipe 84.25 Rupees Eighty No.

for Wash basin C.P. 32 mm dia of Four And

approved or equivalent brand as Paise Twenty

per direction of Engineer In- Five Only

charge etc. complete.

Estimated Rates

Quanitites Total

estimated Amount

but may be Item of Work Unit according to

No. In Figure In Words

more or estimated

25 10.00 Providing and fixing plastic seat 291.33 Rupees Two No.

and cover for wash down water Hundred

closer with C.P. brass hinges and Ninety One

rubber buffers. (B) Black plastic And Paise

seal and cover Thirty Three

26 100.00 Providing laying and jointing in 72.65 Rupees Rmt

true line and level 15mm dia. Seventy Two

U.P.V.C. Pipe ( SCH- 40) for cold And Paise

water including fittings as Sixty Five

approved by Engineer In Charge. Only

Pipe shall be fixed on the wall

with the help of clamp at every

two metre C/C or shall be

concealed as directed including

necessary fittings etc. including

testing of pipe and joints and

fixing the same with adhesive

solvent, including cost of all

27 128.52 Repairing to Door / Window 683.58 Rupees Six Smt

including dissembling from Hundred

frame, wroughting, providing Eighty Three

patti, angles, replacing / And Paise

repairing stoppers - aldrops - Fifty Eight

handles etc. for proper fixing in Only

to frame hole etc. complete for

smooth operation and proper

utilization including assambeling

and refixing of the same as

directed by Engineer-in-charge.

Estimated Rates

Quanitites Total

estimated Amount

but may be Item of Work Unit according to

No. In Figure In Words

more or estimated

28 52.0 Providing and fixing door 301.99 Rupees Three No.

stopper 2", 3'',4'' & 5'' long with Hundred One

all necessary fittings including all And Paise

the work to be done when fitting Ninety Nine

the door etc. as per detailed Only

drawing or instructions by

Engineer in charge.

29 50.0 Repairing of RCC Slab, Beam, 907.03 Rupees Nine Smt

Column, Pardi, Lintel, Spawlled Hundred

Concrete patche by applying Seven And

Polymer Modified Cement Paise Three

Mortar in the proportion Cement Only

: Sand in 1:3 (by weight) fortified

with SBR in prpoportion

Ltr. per 50 Kg. cement bag in 2 or

3 layers 25 to 50mm overall

thickness wherever total

thickness of repair is exceeding

30mm use of 10 / 6 mm down

size aggregate may be required.

The finish surface to match with

the existing adjoning surface etc.

complete as directed by

Architect / Engineer-in-charge.

30 100.0 Providing 10 mm thick cement 128.86 Rupees One Smt

plaster in single coat on Hundred

brick/concrete walls for interior Twenty Eight

plastering upto floor two level And Paise

and finished even and smooth in Eighty Six

(i)Cement mortar 1:3 (1- Only

Estimated Rates

Quanitites Total

estimated Amount

but may be Item of Work Unit according to

No. In Figure In Words

more or estimated

31 150.0 Providing 15 mm thick cement 176.58 Rupees One Smt

plaster in single coat on Hundred

brick/concrete walls for interior Seventy Six

plastering upto floor two level And Paise

and finished even and smooth in Fifty Eight

(i)Cement mortar 1:3 (1- Only

32 650.0 Applying two coats of Birla or 40.59 Rupees Forty Smt

Asian acrylic lapy ( putty) & two And Paise

coats of primer of approved Fifty Nine

brand and manufacture on new Only

wall surface to give an even

shade including thoroughly

brushing the surface free from

mortar dropping and other

foreign matter and sand papered

33 500.0 Wall painting (two coats) with 79.22 Rupees Smt

plastic emulsion paint of Seventy Nine

approved brand & manufacture And Paise

on under coated wall surface to Twenty Two

give an even shade including Only

thoroughly brushing the surface

free from mortar droppings and

other foreign matter and sand

papered smooth.

Estimated Rates

Quanitites Total

estimated Amount

but may be Item of Work Unit according to

No. In Figure In Words

more or estimated

34 150.0 Wall painting (two coats) with 84.64 Rupees Eighty Smt

plastic emulsion paint of Four And

approved brand & manufacture Paise Sixty

on under coated Celling surface Four Only

to give an even shade including

thoroughly brushing the surface

free from mortar droppings and

other foreign matter and sand

papered smooth.(Ceilling)

35 120.0 Providing and laying 24" x 24" 1189.88 Rupees One Smt

Vitrified 8 mm thick tile flooring Thousand

over 20 mm (average) base of One Hundred

cement mortar 1:6 (1 cement : 6 Eighty Nine

coarse sand) or by adhesive And Paise

material including dismentalling Eighty Eight

of existing flooring and jointed Only

with colour cement slurry

including finished with flush

pointing & cleaning the surface

etc.complete For light shade

Estimated Rates

Quanitites Total

estimated Amount

but may be Item of Work Unit according to

No. In Figure In Words

more or estimated

36 7.20 Providing and laying 18mm thick 2841.94 Rupees Two Smt

polished Black of colour Granite Thousand

stone slab machine cut in single Eight

piece with all exposed edges Hundred

polished, chamfered and Forty One

proected 6mm from finished wall And Paise

thickness in sill and jambs laid Ninety Four

on 10mm thick cement mortar 1 Only

: 3 (1 cement slurry including

rubbing and jointed withgrey

cement slurry including rubbing

and polished etc. comlete. also

Fixing: Rear face of granite shall

be standed using clean sand

sieve no.10 passed 2mm fixed

with araldite and dried for at list

37 4.0 Providing and fixing 9466.23 Rupees Nine No.

Conventional EWC Cat.No. Thousand

S1043101 (CARAT) with close Four Hundred

seat cover including J Wall Hook Sixty Six And

with all fitting inlet and outlet Paise Twenty

connection and all required Three Only

fitting accessories etc. completed

as per directed engineer in-

Estimated Rates

Quanitites Total

estimated Amount

but may be Item of Work Unit according to

No. In Figure In Words

more or estimated

38 21.0 Providing and fixing 35mm thick 5648.20 Rupees Five Smt

SINGLE SHUTTER Solid Core Thousand Six

Wooden FLUSH DOOR using Hundred

covered with 1mm thick Forty Eight

Laminates on both shutters of And Paise

approved colour, pattern and Twenty Only

design by the Architect, and

mm x 70 mm teak wood frame

fixed with min. 4 nos of 150mm

high SS Hinges including 300 mm

Stainless Steel Handles, Heavy

Stainless Steel Aldrop and other

SS Fixtures, Door Cacher and

locking arrangements as per

detailed drawing / as directed

and approved by the Architect

and Engineer-In-Charge etc.

39 8.0 Providing julla Structure for 2565.40 Rupees Two job

height up to 13th storey building Thousand

with labour and all arrangement Five Hundred

for outside repairing work etc. Sixty Five And

directed by engieer in charge. Paise Forty

Rs. In words : Rupees Thirteen Lakh(s) Ninety Seven Thousand Six Hundred Eighty Three And

Paise Ninety Four Only

I / We am / willing to carry out the work at __________ above / below _______________

________________ percentage (should be written in figures and words) above / below the

estimated amount mentioned above. Amount of my / our tender works out as under.

Estimated Amount put to Estimated Amount put to

Estimated Rates

Quanitites Total

estimated Amount

but may be Item of Work Unit according to

No. In Figure In Words

more or estimated

Deduct _________ % Below. Add _________ % Above.

Notes for civil works :-

1. All work shall be carried out as per public works Department Handbook and other specifications of

Division or as directed.

2. All the columns is Schedule should be filled in ink and the total of the entries in the last column

should be struck by the contractor under his signature.

3. Rates quoted include clearance of site (Prior commencement of work and as its close) in all

respects and hold good for work under all conditions, site, moisture, weather etc.

4. To be Continued on additional sheets, if found necessary.

5. The Labour Cess shall have to be deducted from payable bill as per prevailing Rules.

6. Credit of Rs. 9600/- Shall be recovered from the payable bills towards cost of dismental materials.

7. For abnormal high or law rates payment of such items shall be regulated as per Govt. circular No.

PARACH / 102008 / 61 / S, Dt. 27/11/2008 attached with tender papers.

Dated Signature of Executive Engineer

the Contractor Navrangpura (R&B) Division