Modernization and Renovation of gates and Regulator Structure of of Head Regulator of Combined Branch at Manpur Head for preparation of installation of SCADA system

Amount

Steel casting as per IS specifications & grade complete in all respects and to entire satisfaction of engineer incharge Alloy Steel Casting

Machining and Finishing of any part to desired shape and size , complete in all respects and to entire satisfaction of engineer incharge

Drilling/ Boring including Reaming complete in all respects & to entire satisfaction of engineer incharge. above 50 mm dia

Drilling/ Boring including Reaming complete in all respects & to entire satisfaction of engineer incharge. above 10 - 20 mm dia

Anealling Heat Treatment of steel in all respect and to entire satisfacion of engineer incharge

Providing Gun Metal Bush

Removing Assembling and fixing in position of GM bush complete in all respect and to entire satisfaction of engineer in charge

Steel forging as per IS specification and grade , complete in all respects and to entire satisfaction of engineer incharge. EN-8

Removing and Fixing of roller pin In position complete in all respects and to entire satisfaction of engineer in-charge. (upto 75 mm/ above 75 mm)

Supply of 8 mm MS plate

Cutting and Staightening Charges complete in all respects and to entire satisfaction of engineer incharge

Preperation of surface for fixing new skin plate with new old skin plate complete in all respects and to entire satisfaction of engineer in charge

Fillet Welding with high strength steel rods complete in all respects and to entire satisfaction of enginer incharge 10 mm wide

Crane Charges for dismantling , loading/ unloading and refitting of gates at site(35 T)

Supply of rod 40 mm dia

Supply of rod 45 mm dia

Supply of rod 65 mm dia

Supply of rod 60 mm dia

Threading for pins complete in all respects and to entire satisfaction of engineer incharge upto 75 mm

Teeth cutting for gear wheel complete in all repects and to entire satisfaction of engineer-in-charge. 6 dp

Teeth cutting for gear wheel complete in all repects and to entire satisfaction of engineer-in-charge 12 dp

Supply of Channel 150 x 150 x 6

Supply of angle 75 x 75 x 6

Supply of Flats 75 x 6

Supply of Chequered Plate 6mm thick

Supply of Channel 150 x 75 x 6

Supply of MS Flats 75 x 8

Providing of hollow bulb seal 100x44 mm and fixing in position including preparation of surface complete in all repects

Removing damaged old rubber seal blub or flat including clamp plate of all sizes and Types.

Providing and fixing galvanized nuts and bolts of all sizes and lengths required

Supply of I-section beam of size 150 x 80 mm

Removing, Providing & fixing S.S Flat, complete in all respects. (Grade 304) Plate 10 mm.

Supply of Anchor Bolts Dia 16 mm

Removing Damaged structural steel and stacking clear from working space by gas cutting complete in all respects and to entire satisfaction of engineer incharge

Commissioning and testing of Gates at site complete in all repects and to entire satisfaction of engineer-in-charge

First Class burnt Brick Work laid in CSM 1:4 including supply, carriage and loading & unloading of cement, sand & bricks complete in all respect.

Raking out joints in lime or cement mortar and preparing the surface for repointing or replastering including disposal of rubish to the dumping ground within 50 m lead (excluding the cost of scraping of plaster and replastering)

Cement Concrete 1:2:4 with stone ballast or shingle complete in all respect.

Scraping colour washing & Distemepring work.

Cement Pointing 1:2 deep variety

Finishing walls with exterior decorative cement based paint such as snowcem, robbiacem etc. two coats to give an even shade.

Burning old paint with blow lamp

Scraping brushing to remove paint to base metal surface

Paintng two coats with anti corrosive bitumastic paint to give an even shade with speacial quality paint

Paintng two or more coats excluding priming coat with synthetic enamel paint in all shade wood metallic or plasted conrete surface to give an even shade.

Applying Priming Coats with metal primer on new steel or iron work i/c prepration of surface

Dismantling Brick masonary

Supply of Multipurpose Grease

Supply of Multigrade Mobile oil 10w- 40 or 10w-50

Providing Advanced direction Sign Board 1200x1800 mm rectangular as per IRC 67-2012 with retro reflective high intensity grade sheeting fixed over 2 mm thick alm sheet with 25x25x3mm angle complete in all respect.

Supply & fixing of MS cover for rope drum including cost of hinges & lifting hooks including labour charges.

Mechanical coupling of Electric motor mechanism including reduction gear with existing gate mechanism complete in all aspects. Rack & Pinion system

Removing, Providing, & fixing Bearing bracket, complete in all respects.

Removing & fixing Bearing, complete in all respects.

Providing LED Light of standard reputed company with minimum 2 year warranty (20 watt)

Plumber block as per list and make SKF , NBC

Supply of Plate 12 mm

Providing and fixing Flexible coupling

Providing and fixing Dog clutch

PVC INSULATED FR COPPER CONDUCTOR CABLES: Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 1sq.mm (Un-sheathed) (within panels)

PVC INSULATED FR COPPER CONDUCTOR CABLES: Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 1.5sq.mm (Un-sheathed) (within panels)

PVC INSULATED FR COPPER CONDUCTOR CABLES: Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 2.5sq.mm (Un-sheathed) (within panels)

PVC INSULATED FR COPPER CONDUCTOR CABLES: Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 4sq.mm (Un-sheathed) (within panels)

PVC INSULATED FR COPPER CONDUCTOR CABLES: Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 6sq.mm (Un-sheathed) for induction brakes

PVC INSULATED FR COPPER CONDUCTOR CABLES: Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 10 sq.mm (Un-sheathed) for coupling/ berm

Supply and erection of PVC insulated PVC sheathed FR (2Core) round flexible wire with copper conductor cable (ISI marked) confirm to IS:694/1990 left bare in pipe or on surface with cleats of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 1.5sq.mm (48/0.20mm), 2Core ( For MCB )

Supply and erection of PVC insulated PVC sheathed FR (2Core) round flexible wire with copper conductor cable (ISI marked) confirm to IS:694/1990 left bare in pipe or on surface with cleats of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 2.5sq.mm (50/0.25mm), 2Core ( For MCB )

XLPE INSULATED ARMOURED CABLES (LOOSE): Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS:7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:- Overall size 10sq.mm (2Core) Armoured (Loose) (for motor to motor connection)

XLPE INSULATED ARMOURED CABLES (LOOSE): Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS:7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:- Overall size 25sq.mm (4Core) Armoured (Loose) (for Connection from Main Line considering parallel connection)

XLPE INSULATED ARMOURED CABLES (LOOSE): Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS:7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:- Overall size 35sq.mm (4Core) Armoured (Loose) (for Connection from Transformer)

G.I. EARTHING WIRE/ ROPE (AS ADDITIONAL LENGTH): Bonding to existing earth with 8 S.W.G. (4mm dia) G.I. wire fixed with stapples on wall.

SUPPLY AND ERECTION OF WIRING ACCESSORIES: Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc:- Modular Motor Starter 25Amp. (Two Module)

BAKELITE SHEET: Supply and erection of brown bakelite sheet white glazed translucent backside painted 3mm thick (thickness not less than 3mm) on the existing metal box including cutting, fixing and connection of existing switches and sockets and other petty material etc.

MINIATURE CIRCUIT BREAKERS:Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- MCB Double Pole 6-32amp. (10kA, Curve- C)

MINIATURE CIRCUIT BREAKERS:Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- MCB Double Pole 50, 63amp. (10kA, Curve- C)

MINIATURE CIRCUIT BREAKERS:Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- MCB Single Pole 0.5-4amp. (10kA, CurveC)

MINIATURE CIRCUIT BREAKERS:Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- MCB Triple Pole 6-32amp. (10kA, Curve-C)

MINIATURE CIRCUIT BREAKERS:Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- MCB Four Pole 50, 63amp. (10kA, Curve-C)

RCBO's: Supply and erection of RCBO (Residual Current Breaker Overload) for Earth leakage, overload and short circuit protection suitable for 240/415 volts 50 cycles AC supply with breaking capacity of 10kA as per IEC 61009 in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- RCBO Four Pole 16/25amp., Sensitivity 30mA

Supply and erection of Porcelain Fuse Unit with Extension Strip on existing surface with G.I. bolts & nuts/ rag bolts and nuts etc., including connections with suitable size of thimbles and bonding to the existing earth as Per PWD General Specifications :- Porcelain Fuse Unit 32Amp., 415volts

Supply and erection of Porcelain Fuse Unit with Extension Strip on existing surface with G.I. bolts & nuts/ rag bolts and nuts etc., including connections with suitable size of thimbles and bonding to the existing earth as Per PWD General Specifications :- Porcelain Fuse Unit 100Amp., 415volts with Extension Strip

MCCB's (FOR PANELS & SHEET ENCLOSURE): Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubical type) in the existing Cubical Panel (confirm to IEC:60947-2) having Ics=100 Icu, 100% neutral with spreader terminal links, Extended rotary handle and relevant PWD general specifications complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with suitable size of thimbles etc:- MCCB Four Pole 125amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting

MS CHANNELS/ FLATS: Supply and Erection of MS angle iron (Channel)/ MS Flats of suitable size with cutting, bending and necessary holes as desired by Engineer-in-charge at site:- MS flat iron size 40mm x 5mm thick

Supply and erection of heavy duty aluminium thimbles/lugs for cable end termination duly crimped including making necessary connections completely:- Aluminium thimble cable Core size 4-6 sq.mm

Supply and erection of heavy duty aluminium thimbles/lugs for cable end termination duly crimped including making necessary connections completely:- Aluminium thimble cable Core size 25 - 35sq.mm

Supply and erection of heavy duty Copper thimbles/lugs for cable end termination duly crimped including making necessary connections etc. completely:- Copper thimble cable Core size 25 - 35sq.mm

Nuts & Bolts of all sizes and length required

Providing, installation & fixing in position of Limit Switches 30 Amp capacity H.D. At site complete in all respects and to entire satisfaction of engineer-in-charge

Providing, installation & fixing in position of LC1D Contactor 32 Amp at site complete in all respects and to entire satisfaction of engineer-in-charge

Designing, Supply, Erection, Testing & commissioning of indoor Type LT cubical panel enclosure (dust, vermin and interchangeable modules with facilites for extensions or reduction as per the space or requirments). The Panel shall be suitable for operation at 415+6% Volts, 50HZ, 3 phase 4 wire & earth system. The assembly manufacturer should be ISO approved and CPRI tested for short circuit of (minimum 50kA) as well as IP degree of protection (IP 54/55). Fabrication:- Panel shall be made from 14/16 SWG CRCA sheet, conforming to IS 8623/1977-82. The sheet metal used for the fabrication of control panel will be 2mm for load bearing member’s door and fittings plates etc. the partitions and other non load bearing members will be fabricated out of 1.6mm sheet, the sheet will be of mild steel CRCA type. The base channel will be made out of 75 x 40 x 5mm rolled channel (iii) LT Panel enclosure having space for 1No. Incomer MCCB 250Amp. and 6Nos. outgoing MCCB's 40amp. to 125amp. according to the requirement at site (Approx. size 1300 x 1650 x 400mm)

Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:- (a) Heavy Gauge PVC Conduit Pipe 20mm dia. (On Surface)

Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:- (d) Heavy Gauge PVC Conduit Pipe 40mm dia. (On Surface) dia. (On Surface)

Painting of Galvanized iron pipe pole including bracket with two coats of aluminium paint (With brush):- (b) Overall Length 6.1 Metre

Painting of G.I./ Conduit pipes with two coats of approved paint (With brush) including cleaning the surface etc.:- (a) Painting of G.I. Pipe 15mm and Conduit Pipe 20mm dia.

Painting of G.I./ Conduit pipes with two coats of approved paint (With brush) including cleaning the surface etc.:- (d) Painting of G.I. Pipe 32mm and Conduit Pipe 40mm dia.

Supply and erection of PVC flexible pipe complete without compression glands, locking arrangement, check-nuts as required:- (a) PVC Flexible Pipe 20mm dia.

Supply and erection of MS perforated cable tray (MS Sheet thickness 2mm) with DA gray paint on the existing surface with the help of MS angle iron support (to be painted with approved paint) of size 50mm x 50mm x 6mm thick to be fixed with fastners/ nut & bolts etc., complete in all respect as desired by the Engineer-in-charge and as per PWD General Specifications:- (i) Cable Tray Size 150mm x 50mm x 50mm (2mm thick)

Supply and erection of MS perforated cable tray (MS Sheet thickness 2mm) with DA gray paint on the existing surface with the help of MS angle iron support (to be painted with approved paint) of size 50mm x 50mm x 6mm thick to be fixed with fastners/ nut & bolts etc., complete in all respect as desired by the Engineer-in-charge and as per PWD General Specifications:- (ii) Cable Tray Size 300mm x 50mm x 50mm (2mm thick)

Supply of 0.75 KW (1 HP ) motor including EM Brake integral with with gearbox assembly mounted with torque of 241 Nm at 28.8 rpm at gearbox output shaft. Standard Motor consists of 3 dia , Squirrel cage , 415 V +/- 10% , 50 Hz +/- 5% , TEFC IP55 , SI duty , Amb Temp 50 degree , F class Insulation limited to B class (OEM Specs)

Supply and installation of VFD ( Variable frequency drive )for 1 HP motor

12 Watt WHITE-LED BASED SOLAR STREET LIGHTING SYSTEM With 30 Ah Battery Capacity

VARSHA CONSTRUCTION CO