Supply Installation Testing and Commissioning of Fire Fighting System at Main Block and Academic Block of IHRD Engineering College Kottarakkara Kollam Electrical Fire Fighting Work

Amount

SITC of Fire Fighting System

OD170908/2022-2023:Supplying, installation, testing and commissioning of electric driven terrace pump mounted on anti vibration pads consisting of following,complete in all respects as required. a. Horizontal type, centrifugal, End Suction pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal at a flow of 900 lpm at 35m Head confirming to IS : 1520 b. Suitable HP squirell cage induction motor TEFC type having synchronous speed of 1500 RPM & class-F insulation suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 protection for enclosure conforming to IS-325 fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. d. Suitable cement concrete foundation duly plastered

90.14.28.2:S & F Motor starters of the following ratingsThree phase DOL starters for 0.25HP to 7.5 HP motor

90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.<br> Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)

90.14.3.1:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardA' section neoprene beeding suitable for 1.60/ 2.00 mm sheet

90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

OD169565/2022-2023:Providing and fixing following metering ct 100/5A 5VA /1A accuracy class 0.5 existing panel and giving connection complete

OD169566/2022-2023:Supply and fixing 20 A, HRC Fuse Base with 2A HRC Fuse link

OD169567/2022-2023:Supply & fixing 2 A, 415 V, 2 way neutral link mounted on DMC/ SMC base.

OD169568/2022-2023:Providing and fixing Blue colour LED indicator, AC/DC, 22.5 mm cut out dia in existing panel and giving connection complete

OD169569/2022-2023:Providing and fixing Red, Green, Black, Yellow, Orange colours LED indicator, AC/DC, 22.5 mm cut out dia in existing panel and giving connection complete

OD169570/2022-2023:Supply & Fixing Single Phase Voltmeter accuracy Class 1Digital LED Type 96x96mm

OD169571/2022-2023:Supply & Fixing Single Phase Ammeter accuracy Class 1

1.17.1:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.1 x 1.5 sq. mm

90.17.7.6:Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :80 mm dia

90.17.7.7:Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :100 mm dia

90.17.14.5:Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :100mm dia

90.17.9.1:Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :Single headed Gunmetal

90.17.11.5:Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required100 mm dia

90.17.16.1:Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :Gun Metal

OD169573/2022-2023:Charges for core cutting holes up to 150mm dia in RCC Floors and Roofs for passing MS Pipe

17.2.14:Supplying, installation, testing & commissioning of addressable manual call point complete as required.

90.17.19.1:Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :2 way-100 mm dia M.S. Pipe

90.17.22:Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required

OD169574/2022-2023:Supply & fixing of Pressure Gauge in the existing system as required

OD169575/2022-2023:Supply,Installation,Testing and Commissioning of Air Release Valve 20mm gun metal including fixing the existing pipe with all accessories if required

OD169576/2022-2023:Supply,installation,testing and commissioning of Hose cabinet having the size of 750*500*250 mm made of MS sheet and full front door glass and locking arrangements suitable to accommodate 2 Nos 15mm long hose pipe and 1 Nos Branch pipe.The cabinet shall be painted to scarlet red colour pain

OD169577/2022-2023:Supply and providing of ABC type fire extinguisher 6kg capacity consisting of M.S cylindrical body,squeeze lever discharge valve fitted with pressure indicating gauge internal discharge tube, 30cm long high pressure discharge hose, nozzle etc. with installation brackets conforming to IS 15683 as required

OD169578/2022-2023:Supply,Installation,Testing and Commissioning of Electric Hooter.

OD169579/2022-2023:Supply and providing 9 Litre capacity GI Fire Bucket painted in post office red with primer coat of red oxide and written with white paint 'FIRE' mounted on MS angle frame work/ wall bracket filled with fine sand, painting the bracket/ floor stand including making good the damages, colour washing etc. as required. as per IS 2546

OD169580/2022-2023:Fabrication, supply, conveyance and fixing frame work made out of suitable size angle iron cut and welded to shape of suitable size painted with 2 coats of synthetic enamel paint over a coat of red oxide primer & with drilled holes/brackets to mount the fire buckets, fixed to wall/floor using suitable size anchor bolts or grouted to wall/pedestal, making good the damages, colour washing etc as required

OD169581/2022-2023:Supply and providing Glow SIgn boards of 3mm PVC foam board size not less than 12'x4' as required

OD169582/2022-2023:Supply and providing Assembly point boards of 3mm PVC foam board size not less than16'x16' as required

90.17.17.1:Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. a. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 b. 20 mm nominal internal dia gun metal globe valve & nozzle. c. Drum and brackets for fixing the equipmets on wall. d. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. 30 m

OD169583/2022-2023:Ball Valve-Supply,Installation,Testing and Commissioning of CI slim seal type ball valve with required flanges,nuts and bolts gasket etc complete 20mm dia

90.6.5.3:Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.2 core 1.00 sq mm

1.21.1:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

OD169584/2022-2023:Charges for preparation of Electrical/Fire drawing per A3 sheet first copy(Supply and Erection of fire route map drawing in A3 sheet with plastic laminated)

OD169585/2022-2023:Copying Charges of Electrical/Fire drawing per A3 sheet additional copies

OD169586/2022-2023:Fee to be remited to Fire &rercue service Department (actual amount incurred for the above items will be reimbursed on production of orignal documents)(Non-Competitive Item Rate Rs.39.10/Sqm)

Electrification

90.12.7.13:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3 core 6 sq mm with factory made clamp

90.12.7.39:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 6 sq mm with factory made clamp

OD169562/2022-2023:Supply and making end termination with brass compression gland and aluminium lug for following size of PVC sheathed/XLPE aluminium conductor cable of 1.1 KV geade as required 4x6 sqmm

OD169563/2022-2023:Supply and providing 25x3 mm brass bolt and nut with washer including drilling holes as required

90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)

90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)

OD169564/2022-2023:Supply, conveyance and fixing the following types & current rated control gears & switch gears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required. 63A Isolator switch disconnector

Bidder Name

SPARK FIRE SAFETY EQUIPMENTS