Project for renovation of Phika barrage at Tumaria and Tumaria extention dam, Block Jaspur, Distt.-Udham Singh Nagar

Amount

Excavation for Structures Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. Ordinary soil Upto 3 m depth

Construction of embankment with approved material obtained from borrow pits (including cost of compensation for earth taken from private land) with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.

Construction of Embankment with Material Obtained from Roadway Cutting Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5

Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 P.C.C. grade M 20 Nominal mix (1:2:4)

45 To 90 mm Shingle filling between Gaps of C.C Blocks i/c all cost of labour, material and T and P etc Complete

Providing and laying filter material underneath pitching in slopes complete as per drawing and technical specifications Clause 1302

Providing and laying pitching on slopes laid over prepared filter media as per drawing and technical specifications Clause 1302. Stone/Boulder

Stone masonry work in cement mortar in foundation complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203. In 1:4 cement mortar

Pointing with Cement Mortar (1:3) as per technical specification

Dismantling Brick/Tile Work Dismantling of existing structures like culverts, bridges, retaining walls and other structures comprising of brick masonry, including disposal of unserviceable material and stacking the serviceable material with all lift and lead of 1000 m as per Technical Specification Clause 202 Bick Work in Cement Mortar

Brick Soling Laying brick soling layer on prepared sub-grade with brick on end edging according to lines, graded and cross-section shown on the drawing filling joints with sand and earth, spreading 25 mm thick layer of earth over brick soling,watering and rolliing the same with three wheel road roller 80-100 kN as per Technical Specification Clause 412

Brick masonry work in cement mortar in foundation complete excluding pointing and plastering as per drawing and technical specifications Clauses 600, 1202 & 1203 Brick masonry in 1:4 cement mortar

Plastering with cement mortar (1:4), 15 mm thick on brickwork in substructure as per technical specification Clauses 613.4 & 1204

Painting on Steel Surfaces (Providing and applying two coats of ready mix paint of approved brand on steel surface after through cleaning of surface to give an even shade)

Painting Two Coats on New Concrete Surfaces Painting two coats including primer coat after filling the surface with synthetic enamel paint in all shades on new, plastered / concrete surfaces as per drawing and Technical Specification Clause 1701

Providing And Fixing Sal Wood Planks at Phika Barrage And Phika feeder

Painting on Wood Surfaces (Providing and applying two coats of ready mix paint of approved brand on wood surface after through cleaning of surface to give an even shade)

Removing old/damaged bottom rubber seal from Gate scraping and cleaning surface, marking on New rubber seal making holes, fixing and clamping with MS plate buy new hexagonal/ counter sunk head, high tensile bolts, nuts washers, making adjustment as per requirement of site including all cost of material, labour, T&P and scaffolding etc. for proper completion of work at site but including cost of superior quality rubber seals plane type.

Removing old/damaged side musical knot (P-Type) rubber seal from Gate scraping and cleaning surface, marking on New rubber seal making holes, fixing and clamping with MS plate buy new hexagonal/ counter sunk head, high tensile bolts, nuts washers, making adjustment as per requirement of site including all cost of material, labour, T&P and scaffolding etc. for proper completion of work at site but including cost of superior quality musical rubber seals. (Both Side)

Providing and fixing 24 Watt L.E.D. Solar Street Light with 0.6 M Long G.I. Pole with M.S. Bracket ,Nut Bolt Pipe Clamp , Copper wirer i/c all cost of labour and material T&P etc. complete.

Providing and fixing all in One Solar L.E.D. Street Light System 24W inclusive of 24W LED + 50W PANEL + 11.1 Volt ,26AH Lithium Ion Battery in built With motion sensor dimming system i/c all cost of labour and material T&P etc.complete.

M/S GHANSHYAM TEWARI