Fabrication, Erection and Commissioning Of Cantilever bag conveying system to reduce Wagon loading time AND pushing activity of Wagons in Suphala Bagging Plant at RCF Trombay

Amount

Job No 1- Removal of existing entire SC-1A Conveyor from loading platform. (Elevation is 2.2 meter approx. from ground level)

Removal/Dismantling of conveyor structure

Removal of gearbox, motor, pulley, rollers.

Job No 2- Shortening of existing RBC-3 Conveyor by 12 meter out-off 24 meter from loading platform. (Elevation is 2.2 meter approx. from ground level)

Shortening of existing RBC-3 Conveyor by 12 meter out-off 24 meter from loading platform.

Fabrication, erection & installation of Tail & Take_up pulley structure along with skirt board

Job No 3- Installation of new slat-4A conveyor belt system. (Belt width 800mm, length 12 meter & elevation is 08 meter from ground level)

Fabrication, erection and commissioning of conveyor structure, Gearbox & Motor foundation, Head, Tail, Take up pulley structure, G I gratings, transfer chutes & decking plate of slat-4A conveyor as per scope of work.

Installation of Head Pulley, Tail pulley, bend pulleys(2 Nos), Take-up Pulley, Snub pulleys (2 Nos), troughing & return frames (30 & 10 respectively) and rollers & Gear box with motor etc. of Suphala slat-4A conveyor as per scope of work. (Supply & installation of 32 nos. anchor fasteners, size M-16 is in Party scope)

Fabrication & erection of hand railing & toe guard for Suphala slat-4A Conveyor

Job No 4- Fabrication, erection & commissioning of two way diverter along with SS chute (2 nos.) at head pulley od Slat-4A Conveyor belt. (Elevation is 08 to 04 meter from ground level).

Fabrication, erection of SS discharge chutes as per SOW

Fabrication, erection of two way diverter as per SOW

Job No 5- Re-locating Truck loader (TL-1) from RBC-3 conveyor to BC-6 Conveyor belt. (Elevation is 2.2 meter from ground level).

Removal, shifting & installation of Truck loader as per SOW (Hydra for shifting of Truck loader is in Party’s Scope) (Supply & installation of 32 nos. anchor fasteners, size M-16 is in Party scope)

Job No 6- Installation of new cantilever conveyors on loading platform along with MDS trolley. (Elevation is 02-03 meter from ground level).

Fixing of 16.0 mm thick plates two No each on RCC columns/Beams by anchor fasteners and two No each by welding as per scope of work. (Supply & installation of 96 nos. anchor fasteners, size M-16/12 X 125 mm long is in Party scope)

Fabrication and Erection of Cantilever Conveyor structure, foundation structure, platform for gear box- motor foundation, walkway of GI gratings, ladders etc. as per scope of work.

Installation/Mounting of Head pulley, Tail pulley take up pulleys, bearings, Gear box, Motor, couplings as per scope of work.

Fabrication & erection of hand railing & toe guard for Suphala ET-9 Conveyor

Job No 7- Installation of Mobile Diverting station (02 nos) on loading platform along with MDS trolley. (Elevation is 04 meter from ground level).

Fabrication, erection & commissioning of Mobile Diverting station as per SOW

Job No 8- Installation of Erection of rails for wagon loader on loading platform. (Elevation is 2.2 meter from ground level).

Fabrication & provision of foundation for bearing plate. & Installation of 52 kg rail along with other fitting, alignment as per given in scope of work.

Job No 9 Removal of existing staircase by gas cutting on loading platform. (Elevation is 2.2 meter from ground level).

Removal/Dismantling of conveyor structure

AL AAQIB ENGINEERING WORKS

Balaji Engineering Works