Loading…
Loading…
Tender Value
₹2.6 Cr
EMD Value
₹2.6 L
Closing Date
29 Jun 2026, 6:00 pm
Executive Engineer R and B Division Modasa
Construction of B type - 4 Units and C type - 4 Units Quarters Ta. Bhiloda Dist. Aravalli.
309035
Nivida No.03 of 2026-27
Open
Civil Works - Buildings
Arvalli
10 documents required · 8 mandatory · 2 optional
₹3,600
Executive Engineer R & B Division Modasa
₹2.6 L
6 Jun 2026
6 Jun 2026
6 Jun 2026
29 Jun 2026
6 Jun 2026
Bill of Quantities
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
1 Excavation for foundation upto 1.5 m depth including sorting 543.00 Cum 157.08
out and stacking of useful materials and disposing off the
excavated stuff upto 50 Meter lead.(B) Dense or Hard soil
2 Excavation for foundation for depth from 1.5 m to 3.0 m 243.30 Cum 170.40
including sorting out and stacking of useful materials and
disposing off the excavated stuff upto 50 Meter lead.(B)
Dense or Hard soil
3 Filling available excavated earth (excluding rock) in trenches. 783.00 Cum 136.92
plinth, sides of foundations etc. in layers not exceeding
cm. in depth consolidating each disposited layer by ramming
4 Filling in plinth with sand under floors including watering 42.00 Cum 481.81
ramming, consolidating and dressing complete
5 Filling in foundation and plinth with murrum or selected soil 83.00 Cum 294.39
in layers of 20cm. thickness including watering, ramming and
consolidating etc. complete.
6 Providing and laying controlled cement concrete M.150 for 169.00 Cum 4300.58
curing complete including cost of formwork but excluding the
cost of reinforcement for reinforced concrete work in (A)
Foundations, footings,Base of columns and Mass concrete
7 Providing and laying controlled cement concrete M.250 and 225.00 Cum 4620.25
curing complete including cost of formwork but excluding the
cost of reinforcement for reinforced concrete work in (A)
Foundations, footings, Base of columns and Mass concrete.
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
8 Providing and laying controlled cement concrete M250 and 15.00 Cum 8293.11
curing complete including the cost of form work but
excluding the cost of reinforcement for reinforced concrete
work in Columns, pillars posts and struts Column Up to
9 Providing and laying cement concrete 1:4:8 (1- Cement : 4- 11.00 Cum 2956.07
coarse sand : 8- Machine Crushed stone aggregates 40 mm
nominal size) and curing complete excluding cost of
formwork in (A) Foundation and Plinth
10 Providing and laying controlled cement concrete M.250 and 40.00 Cum 5995.36
curing complete including the cost of form work but
excluding the cost of reinforcement for reinforced concrete
work for Ground and Plinth Beams
11 Providing and laying controlled cement concrete M.200 and 63.00 Cum 8200.33
curing complete including the cost of form work but
excluding the cost of reinforcement for reinforced concrete
work in Columns, Pillars posts and struts, For All Floors.
12 Providing and laying controlled cement concrete M.200 and 29.00 Cum 11677.30
curing complete including the cost of formwork (Vertical
fins and vertical sun breakers.) and reinforcement for
reinforced concrete work in (B) Walls, for all floor level
13 Providing and laying controlled cement concrete M.200 and 81.00 Cum 6011.16
curing complete including the cost of form work but
excluding the cost of reinforcement for reinforced concrete
work in Beams For All Floors.
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
14 Providing and laying controlled cement concrete M.200 and 116.00 Cum 6972.82
curing complete including the cost of form work but
excluding the cost of reinforcement for reinforced concrete
work in Slab for All Floors.
15 Providing and laying controlled cement concrete M.200 and 15.00 Cum 6371.38
curing complete including the cost of form work but
excluding the cost of reinforcement for reinforced concrete
work in Lintels For All Floors.
16 Providing and laying controlled cement concrete M.200 and 3.00 Cum 6969.59
curing complete including the cost of form work but
excluding the cost of reinforcement for reinforced concrete
work in Chajja For All Floors.
17 Providing and laying controlled cement concrete M.250 and 18.00 Cum 6993.10
curing complete excluding the cost of formwork and
reinforcement for reinforced concrete work in (E) Staircases
18 Providing TMT Bar FE 500D reinforcement for R.C.C. work 75160.00 Kg. 77.29
including bending, binding and placing in position complete
19 Providing throating or plaster drip and moulding to R.C.C. 19.00 Rmt 43.08
Chhajja by making 5mm to 15mm wide grove as per design
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
20 Brick work using Common Burnt Clay building bricks having 230.00 Cum 4521.45
crushing strength not less than 35 kg./Sq.Cm. in Super
structure Above plinth level up to All Floor levels in Cement
Mortar 1:6 (1- Cement : 6 -fine sand) (Conventional)
21 Half brick masonry in common burnt clay building bricks 332.00 Sqmt 688.93
having crushing strength not less than 35 Kg/Sq.Cm. in
Superstructure above plinth level upto All Floor level in
Cement mortar 1:4 (1- Cement : 4 -coarse sand )
(Conventional).
22 Providing & Fixing Chicken mesh for joint between brick 241.00 Sqmt 173.72
work & RCC work fixing with nail & GI washer as per
director in charge
23 Providing 20 mm thick double coat mala cement plaster on 1877.00 Sqmt 350.45
interior brick / concrete work for plastering comprising of
base coat of 12 mm thick cement plaster in cement mortar (1
Cement : 4 coarse sand) in rough finishing and 8 mm thick
top coat of cement mortar 1:2 (1 Cement : 2 Coarse
sand)finished with trovel including scaffolding curing etc.
10x10 mm groves etc. Complete for All Floors.
24 Providing 10mm thick cement mala plaster in single coat on 1289.00 Sqmt 231.50
brick/concrete walls for interior plastering and finished even
and smooth fininshing with a floating coat of neat cement
slurry in (i)Cement mortar 1:3 (1-cement:3-sand). Complete
for All Floors.
25 20mm thick sand faced cement plaster with Gutka Finish on 852.00 Sqmt 321.10
walls upto height 15 metres above ground level consisting of
12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and
8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand)
with 5mm grooves, etc. complete.
26 Providing Water Proofing Treatment on Sunk Slab including 37.00 Sqmt 370.67
cement concrete flooring 1:2:4 (1-cement : 2-coarse sand : 4-
graded stone aggregate 20mm nominal size) laid in one layer
and finished with a floating coat of neat cement average
50mm thick to prepare slope including water proofing
chemical etc. Complete for Sunk Slab for All Floor.
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
27 Applying two coats of putty & two coats of primer of 3121.00 Sqmt 40.60
approved brand and manufacture on new wall surface to give
an even shade including thoroughly brushing the surface free
from mortar dropping and other foreign matter and sand
papered smooth.
28 Wall painting (three coats) with plastic emulsion paint of 1832.00 Sqmt 125.53
approved brand and manufacture on undecorated wall surface
to give an even shade including throughly brushing the
surface free from mortar droppings and other foreign matter
and sand papered smooth.
29 Ceiling painting (three coats) with plastic emulsion paint of 1289.00 Sqmt 131.02
approved brand and manufacture on ceiling and soffits of slab
surface to give an even shade including throughly brushing
the surface free from mortar droppings and other foreign
matter and sand papered smooth.
30 Finishing wall with weather proof exterior emulsion paint 1023.00 Sqmt 93.93
(two coats) with Damp Proof Coating (one coat) on wall
surface to give an required shape even shade after thoroughly
brushing the surface to remove all dirt, and remains of loose
powdered materials.etc complete
31 Providing and laying polished Blue Kota stone slab flooring 26.00 Sqmt 1019.00
over 20mm (Average) thick base of cement mortar 1:6 (1-
cement : 6-coarse sand) or L.M. 1:1.5 (1-Lime putty :1.5 -
coarse sand) laid over and jointed with grey cement slurry
mixed with pigment to match the shade of slab including
rubbing and polishing etc. complete. (A) 25mm thick
32 Providing and laying Ceramic tiles 6mm thick in skrting 38.00 Sqmt 1090.32
risers of steps and dedo on 10mm thick cement plaster 1:3 (1-
cement : 3-coarse sand) and jointed with white cement slurry
33 Providing and fixing pre-cast Rubber Dye / steel Dye inter 294.00 Sqmt 706.93
locking concrete block 60mm thick with grade of concrete
M300 pnumatic compressed / vibrated mechanically and as
per approved design Confirming to IS 15658 :
including 35 mm Sand layer for levelling and filling the joint
with sand in proper line and level as per guidlines of IRC : SP
63-2018 etc. Complete.
34 P & L 60 x 60 cm Soluble Salt vitrified 10 mm thick tile 316.00 Sqmt 1324.11
flooring over 20 mm (average) base of cement mortar 1:6 (
cement: 6 coarse sand) on new surface or fixing on existing
flooring by adhesive material including dismentaling of
existing flooring and jointed with color cement slurry
including finised with flush pointing & cleaning the surface
etc. complete for Light shade
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
35 P & L 60 x 60 cm Soluble Salt vitrified 10 mm thick tile 36.00 Sqmt 1345.32
flooring over 20 mm (average) base of cement mortar 1:6 (
cement: 6 coarse sand) on new surface or fixing on existing
flooring by adhesive material including dismentaling of
existing flooring and jointed with color cement slurry
including finised with flush pointing & cleaning the surface
etc. complete for Dark shade
36 Providing and laying Vitrified tiles 10 mm thick , 24'' x 24'' in 54.00 Sqmt 1195.03
skrting risers of steps and dedo on 10mm thick cement plaster
1:3 (1-cement : 3-coarse sand) and jointed with white cement
37 P & L Mate Finished Antiskid Ceramic 10 mm thick tile 26.00 Sqmt 1266.54
flooring over 20 mm (average) base of cement mortar 1:6 (
cement: 6 coarse sand) on new surface or fixing on existing
flooring by adhesive material including dismentaling of
existing flooring and jointed with color cement slurry
including finised with flush pointing & cleaning the surface
38 Providing and laying coloured glazed tiles of the size 300 mm 282.00 Sqmt 1487.89
x 450 mm x 8 mm in skirting, risers of steps and dedo on
mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) &
jointed with white cement slurry.
39 Providing and fixing Machine cut, Free edges, Mirror 106.00 Sqmt 2464.40
Polished Granite stone slab flooring 18mm thick laid on
20mm (Average) thick base of cement mortar 1:6 (1-cement :
6-coarse sand) for Trade & Riser including Half Round
moulding front edge of trade jointed with grey cement slurry
mixed with pigment to match the shade of slab including
rubbing and polishing etc. complete.
40 Providing and fixing Machine cut, Free edges, Polished 184.00 Sqmt 2510.86
Granite stone slab flooring 18mm thick for vertical
wall/Doors/Windows Sill, Jams for cladding as per design
including full moulded round inside edge and laid on10mm
thick base of cement mortar 1:3 (1-cement : 3-coarse sand)
jointed with grey cement slurry mixed with pigment to match
the shade of slab including rubbing and polishing etc.
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
41 Providing and fixing Machine cut Bothside mirror polished 2.00 Sqmt 618.12
kota stone in single piece (Max 150 cm long and width upto
45 cm with both side polished) for horizontal Shelves
including makng grooves & Fixing the same in Brick/
concrete wall finished with flush pointing, round open edge
42 Providing and laying water prooofing treatment with china 345.00 Sqmt 1132.21
mosaic tiles flooring over avg 50 mm C.C. 1:2:4 bedding
maintaining slope for plain and curve surface & 12 mm to
mm broken pieces not more than 2.5 cm of ceramic/ of glazed
tiles to be laid over cement mortar 1:3 to plain or slope and to
be tempered to bring mortar creme out upto surface using
white cement including rounding off junctions and extending
them upto 15 cm along the wall,clearing with water and
oxalic acid etc. as directed.
43 Constructing Sandwich Platform of 18mm thick polished 24.00 Sqmt 2760.33
black or selected granite at top and 25 mm thick kota stone
with 75cm height with necessary support using 20mm thick
cement mortar 1:3 for sandwich and fitting at bottom & edges
with waterproof rigid adhesive including making necessary
grooves in walls with vertical support of double kota stonr
sandwich every 60cm centre to centre including all labour
material of approved quality including full moulded round
front edge fixed in wall for partition.
44 Providing and fixing flush door with Single shutters, solid 129.00 Sqmt 4211.70
core construction with frame of Anodized Alluminium
section (weight not less than 1.1 kg/mt.) with cross board and
finished with 1 mm thick laminate on both side of shutter,
machine glued PVC beading on periphery including 30cm
long Stainless Steel Pipe handle on both side SS ASIS
grade, SS Stopper 20cm, SS Aldrop 30cm both side, anodised
alluminium butt hinges with necessary screws. (B) Non-
decorative type and block board core anodised alluminium
butt hinges in flush door shutters (2) 35 mm thick.
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
45 Providing and fixing window having extruded aluminum 44.00 Sqmt 2563.38
Colour anodized section frame main outer size 127mm x
38.10mm x 1.35mm @wt. 1.384kg/m, horizontal Four track
member size 122.20mm x 31.75mm x 1.10mm@ wt
kg/m, vertical member of size 122.20mm x 31.75mm x
1.50mm @1.398 kg/mt with sliding shutters of horizontal
member size 40mm x 18mm x 1.29mm@ 0.456kg/mt
,vertical member of size 40mm x 18mm x 1.29mm @
kg/mt with 5 mm thick transparent bronze colour tinted float
glass with powder coated aluminum fittings and fixtures and
transparent silicon sealant glass fixing to frame as per details
etc complete for window. With Mosquito net shutter in outer
46 Providing and fixing window having extruded aluminum 11.00 Sqmt 1977.58
Colour anodized section frame main outer size 95mm x
24mm x 1.17mm @ wt.of 0.738 Kg/mt , horizontal Three
track member size 92mm x 31.75mm x 1.30mm,@ Wt.1.07
Kg/mt , vertical member of size 92mm x 31.75mm x 1.50mm
@ Wt. 1.06 Kg/mt with sliding shutters of horizontal member
size 40 mmx18mm x1.29mm @ wt.of 0.456 Kg/mt, vertical
member of size 40mm x 18mm x 1.29 mm @ wt.of
0.456Kg/mt/ with 5 mm thick transparent bronze colour
tinted float glass with rubber gasket and airlock strip
anodiazed aluminum fittings and fixtures and transparent
silicon sealant glass fixing to frame as per details etc. With
Mosquito net shutter in outer track.
47 Providing and fixing Standard extruded colour anodized 6.00 Sqmt 1368.55
alluminium section frame weight 1.094 kg/Rmt.with
Adjectable Glass Louvers of 5 mm thick transparent glass
colour tinted float glass with transparent silicon gasket with
allu. Powder coated fittings & fixtures.
48 Providing & fixing M.S. Grill using 12 mm dia. M.S. Bars @ 51.00 Sqmt 1870.52
15 cm C/C fixed in frame using angle 35mm x 6mm, 35mm x
6mm flat in center, and Galvanized wire mesh jali 20mm x
20mm spacing, including red lead primer coat and two coats
of oil painting etc. complete.
49 Providing erecting and fixing double coated ISI water tank of 10000.00 Litre 3.95
required capacity each with all necessary fittings and
connection etc. complete on terrace
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
50 Providing, laying and jointing in true line and level 110 560.00 Rmt 876.12
diameter U.P.V.C (Type B) conforming to IS 13592-1992
with one end plain and other end socketed with rubber ring, &
fittings conforming to ISI 14735-1999 of approved make for
drainage system pipe line, pipe shall be jointed with each
other with rubber lubricant, pipe shall be fixed on wall using
of PVC clamp of the size 110 mm diametre x 149 mm length
x 145 mm heigh at every 2000 mm center to center or shall be
concealed in walls as directed including necessary fittings
such as bends, shoes etc. including testing of pipes and joints
and jointed with adhesive solvent cement including cost of all
51 Providing, laying and jointing in true line and level 160 100.00 Rmt 834.39
diameter U.P.V.C (Type B) conforming to IS 13592-1992
with one end plain and other end socketed with rubber ring, &
fittings conforming to ISI 14735-1999 of approved make for
drainage system pipe line, pipe shall be jointed with each
other with rubber lubricant, pipe shall be fixed on wall using
of PVC clamp of the size 160 mm diametre x 210 mm length
x 196 mm heigh at every 2000 mm center to center or shall be
concealed in walls as directed including necessary fittings
such as bends, shoes etc. including testing of pipes and joints
and jointed with adhesive solvent cement including cost of all
52 Providing laying and jointing in true line and level 50mm dia. 60.00 Rmt 195.67
U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as
approved by Engineer In Charge. Pipe shall be fixed on the
wall with the help of clamp at every two metre C/C or shall
be concealed as directed including necessary fittings etc.
including testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials.
53 Providing laying and jointing in true line and level 40mm dia. 160.00 Rmt 148.12
U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as
approved by Engineer In Charge. Pipe shall be fixed on the
wall with the help of clamp at every two metre C/C or shall
be concealed as directed including necessary fittings etc.
including testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials.
54 Providing laying and jointing in true line and level 25mm dia. 160.00 Rmt 91.84
U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as
approved by Engineer In Charge. Pipe shall be fixed on the
wall with the help of clamp at every two metre C/C or shall
be concealed as directed including necessary fittings etc.
including testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials.
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
55 Providing and fixing concealed center point to wall ceiling & 40.00 Rmt 253.83
floor CPVC (SDR 13.5) PIPE having National Sanitation
Foundation (NSF) seal for potable water of following dia.
nominal bore tube fittings and clamps including making good
the wall, ceiling and floor etc. complete. 25 mm.
56 Providing and fixing concealed center point to wall ceiling & 20.00 Rmt 170.36
floor CPVC (SDR 13.5) PIPE having National Sanitation
Foundation (NSF) seal for potable water of following dia.
nominal bore tube fittings and clamps including making good
the wall, ceiling and floor etc. complete. 15 mm.
57 Providing and fixing Gun metal check or non-return fullway 16.00 Nos. 663.43
wheel valve.(E) 40mm dia.
58 Providing and fixing ball cock of approved. quality as 4.00 Nos. 189.84
directed.(A) Copper Metal (ii) 50mm dia.
59 Providing and fixing C.P. brass shower rose with 15mm or 8.00 Nos. 282.17
20mm inlet.(A) 100mm dia. Each
60 Providing and fixing water closet squatting Pan (Indian type 8.00 Nos. 1637.51
W.C. Pan) size 580mm (Earthwork, bed concrete, foot reste
and trap to be measured and paid for separately) (A) Vitreous
China.(I) Long pattern = White colour including 100mm size
P or S trap for water closet squatting pan including jointing
the trap with the pan and soil pipe in cement Mortar 1:1 (1-
Cement : 1-Fine sand) with 25mm dia. chromium plated brass
half trun flush cock of approved quality including fixing in
pipe line xing G.I. inlet connection for flush pipe with W.C.
Pan etc. complete.
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
61 Providing and fixing washbasin (ii) Flat Back washbasin 550 8.00 Nos. 2180.73
mm x v 400mm size. (i) In white colour including with
approved sanitary grade material with CP waste coupling,
waste pipe, 15mm dia Pillar & Stop Cock of approved brand
with connection 15mm dia flexiable pvc pipe etc. complete
62 Providing and fixing Kitchen sink with C.I. or M.S. brackets, 8.00 Nos. 2987.88
painted white including cutting holes in walls (C) Vitreous
China Sink.(i) 600mm x 450mm x 150mm size including
approved sanitary grade material with CP waste coupling,
waste pipe, 15mm dia Pillar & Stop Cock of approved brand
with connection 15mm dia flexiable pvc pipe etc. complete
63 Providing and fixing brass screw down stop tap.(A) 15mm 50.00 Nos. 205.83
64 Providing and fixing PVC SWR Nahni trap IS 14735 for 32.00 Nos. 586.60
drain - 100 mm diameter with jali of the following nominal
diameter of self cleansing design with C.I scread down or
hinged grating including the cost of cutting and making good
65 Providing and fixing S.W. gully trap with C.I. grating brick 8.00 Nos. 1246.92
masonry chamber and water tight C.I. cover with frame of
300mm x 300mm size (inside) with standard weight.(i)
Square mouth traps.(B) 150mm x 100mm size P or R type
66 Providing and fixing C.P. brass towel rail comlete with C.P. 24.00 Nos. 616.43
brass brackets fixed to wooden plugs with C.P. brass
scews.(B) 600mm x 20mm size.
67 Providing and fixing 600mm x 450mm bevelled edge mirror 16.00 Nos. 859.41
of superior glass mounted on 6mm thick A.C. sheet or
plywood sheet and fixing to wooden pluge with C.P. brass
screws and washers.
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
68 Providing and fixing in position PVC cowel went to pipes 14.00 Nos. 75.75
69 Constructing brick masonry chamber for underground C.I. 12.00 Nos. 3660.76
Inspection chamber and bends with bricks having crushing
strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with
frame (Light duty) 455mm x 610mm intenal dimensions total
weight of cover with frame to be not less than 38Kg. (Wt. of
cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe
with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone
aggregate 20mm size) foundation concrete 1:5:10 inside
plaster 15mm thick with cement mortar 1:3 finished smooth
with a floating coat of neat cement on walls and bed concrete
etc. complete.(ii) Inside dimensions 500mm x 700 mm and
450mm deep for pipe line with one or two inlets.
70 Providing sock pit of 5.00 Cu.M. Volume including 4.00 Nos. 3445.19
excavating and filling brickbats with dry masonry work at top
for 45cm. height including covering the top with stone
including providing vatas in C.M. 1:3 with finishing curing
etc. complete as directed.
71 Applying general insecticide pest control treatment to floors, 840.00 Sqmt 80.62
cupboards etc including labour materials etc. complete. Using
Imidacloprid 30.5 SCas Per IS 6313 part -II( (0.075%
concentration by mass) is recommended 10.5ml chemical
diluted with 5 liters of water application 0.5 litre chemical
/Sqm of surface is recommended as per I.S.
72 Providing and fixing 90 cm high Stainless Steel railing made 50.00 Rmt 3880.83
from anticorrosive 304 grade S.S. pipe of 50 mm dia. (16
gauge) as hand rail with S.S.304 grade baluster of 32 mm dia
(16 gauge) as a vertical support fixed in RCC Slab/ steps of
stair at 0.9 mt. c/c including Four horizontal S.S. pipes of
mm dia (16 gauge) at equal distance fixed by 16 mm dia (16
gauge) S.S. pipe with baluster including accessories as per
detailed drawing as directwed etc. complete
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
73 Brick work using common burnt clay building bricks having 46.00 Cum 4214.33
crushing strength not less than 35 kg./Sq.Cm. in foundation
and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)
74 Providing and laying controlled cement concrete M.150 and 3.00 Cum 7426.53
curing complete excluding the cost of formwork and
reinforcement for reinforced concrete work for Coping
75 Providing & laying weep hole in Aburtments, and returns by 160.00 Each 86.73
using A.C. pipe of 100mm including laying in proper grede
and jointing the completed as per detailed specification.
76 Providing and fixing concertina coil fencing with punched 209.00 Rmt. 565.60
tape concertina coil 600 mm dia 10 mt openable length
having 50 no rounds per 6 mt length, upto 3mt height of wall
with existing angle iron (50mm x50mm x5mm )requird
shaped As per Directed Engeenier in charge. placed 2.4mt or
3.00mt apart and with 4 horizontal R.B.T. reinforced barbed
wire(3 mm) , stud tied with G.I. staples and G.I. clips to retain
horizontal, including necessary bolts or G.I.barbed wire tied
to angle iron, all complete as per direction of Engineer-in-
charge, with reinforced barbed tape (R.B.T.)/Spring core (2.5
mm thick) and weight 43.478 gm/meter at compound wall for
ESR M4/intakewell.
77 Steel work, welded in built up sections framed work 9.00 Quintal 9108.49
including cutting, hoisting, fixing in position and applying a
priming coat of red lead paint. (A)In beams and joists,
channels angles Tees, flats, with connecting plates or angle
cleats as in main and cross beams. Hip and jack rafters,
purlins conneted to common rafters and the like
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
78 Drilling of pilot bore hole of size 250/300 mm diameter at 300.00 Rmt 1544.29
above site by mud finish direct rotary rig etc. complete
79 Reaming of 250/300 mm diameter pilot bore hole to size 450 250.00 Rmt 742.35
mm diameter including assembling, lowering housing, casing
strainer pipes with gravel packing and clay ball packing etc.
80 Providing 600 CFM / 150 PSI capacity air compressor upto 1.00 Job 25118.70
available of sand free discharge ( Minimum 6.0 Hours)
81 Supply of reducer made frim 6 mm thick plate (M.S.) for 1.00 Nos. 2009.90
ERW pipe of size (ii) 200 mm dia. x 250 mm dia. X 600 mm
82 Supply of 200 mm diameter V-wire screen pipe of slot size 90.00 Rmt 1401.88
1.0 mm nominal hole etc. complete.
83 Supply of M.S. Bore clamps with 3 holes on either side with 1.00 Pair 1753.36
nuts and bolts of standard make and suitable size (g) 750 mm
x 75 mm x 16 mm flat to 200 mm dia. Pipe.
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
84 Supply of Bore Plug having 100 mm height made from M.S. 1.00 Nos. 834.26
plate with 3 holes at equal distance on circumference for nuts-
bolts type, locking arrangement with nut-bolts & lock nuts of
standard make complete. (b) from 5 mm thick M.S. plate (for
top also) (ii) suitable for 200 mm dia. pipe.
85 Supply of M.S. Bail Plug having length of 0.45 mtr from 1.00 Nos. 907.99
medium class pipe as per I.S.S. suitable for (b) 200 mm
diameter pipe etc. complete.
86 Supply of Steel Bent plates suitable to ERW pipe for (b) 200 8.00 Nos. 71.71
mm diameter and 150 x 150 x 6 mm size etc. complete.
87 Supply of Gravel of size selected size up to 4mm to 6 mm, 6.00 Cmt 2295.73
including stacking and filing etc. complete.
88 Charges for uptron make Electrologger (with carting ) of pilot 1.00 Job 12120.00
bore hole etc. complete.
89 Charges for Geo Hydrological ground water investigation 5.00 Job 16160.00
including water sample chemical analysis etc. complete.
90 S.I.T.C. submersible pump set suitable for bore of 150 mm 1.00 Each 49148.62
dia or more having 3 phase motor capacity not less than
HP with following capacity. Lifting and Lowering taken
extra. [C] 25 stage 160 to 100 LPM discharge at 185 to
mtr head for 50 mm dia delivery pipe
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
91 Providing and erecting PVC corrugated Flexible conduit with 125.00 Rmt 26.26
required numbers of coupling, PVC bushes, Check-nuts etc.
complete of following sizes. (3) 32 mm diameter
92 Lowering of submersible motor pump set complete with 1.00 Job 2568.43
required. Nos. and size of casing pipes erected by means of
proper chain pulley block & pipe wrenches after checking of
threads of each pipe with coupling to take the load of the
pump set and pipe assembly filled up with water. (B) Above
60 mtr and up to 120 mtr
93 Supplying and erecting approved make motor control cubical 1.00 Each 8710.24
panel (Direct - on - line) made from 16 G. CRCA sheet duly
epoxy powder painted inside and outside with hinged doors
and locking, arrangement consisting of suitable size of ON-
OFF isolator (AC - 3/23 duty) main fuses, single phasing
preventer, indicating lamps for R-Y-B phases, overload relay,
automatic water level controller, Ammeter, Voltmeter each
with two way selector switch incoming, wires duly socket
crimped, main contactor & overload relay, start-stop push
buttons, to be erected on angle iron frame grouted on wall as
directed. The isolator, overload relay & contactors will be of
L&T, Seimens or BCH make only (a) DOL upto 7.50 H.P.
94 Supplying and erecting XLPE (IS:7098) (I)-88 ISI 250.00 Rmt 136.35
unarmoured copper cable 1.1 KV grade to be erected as
directed of following size. (E) 3 core 2.5 Sq. mm
95 Providing laying and jointing in true line and level 50mm dia. 150.00 Rmt 195.67
U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as
approved by Engineer In Charge. Pipe shall be fixed on the
wall with the help of clamp at every two metre C/C or shall
be concealed as directed including necessary fittings etc.
including testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials.
96 Providing and fixing butterfly valve of IS approved brand (D) 2.00 Nos. 1595.80
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
97 Providing 15mm thick cement mala plaster in single coat on 126.00 Sqmt 241.38
Rough (Similar)side of single or half brick walls for interior
plastering and finished even and smooth fininshing with a
floating coat of neat cement slurry in (i) Cement mortar 1:3 (1-
cement:3-sand), 10x10 mm groves etc. Complete for upto
Floor two level.
98 Providing and laying polished Kota stone slab flooring over 12.00 Sqmt 1019.00
20mm (Average) thick base of cement mortar 1:6 (1-cement :
6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand)
laid over and jointed with grey cement slurry mixed with
pigment to match the shade of slab including rubbing and
polishing etc. complete. (A) 25mm thick
99 Providing and fixing Safety Grills of required pattern for 65.00 Kg 110.60
windows/door using MS polished bars, Rectangular CRS
Pipes of size 50mm x 30mm x 2mm or Required at required
spacing as per design and hold fast with coach bolts including
one coat of and two coats of matt finished oil painting etc.
100 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. 5.00 Nos 958.17
size having weight not less than 35Kg.
101 Box cutting the road surface to proper slope and camber for 184.00 Cum 109.05
making a base for road work including removing the
excavated stuff and depositing on the road side slope as
directed upto 50Mt.lead.
102 Construction of B.I.T.C. granular sub base by providing 184.00 Cum 1397.46
granular material of Grading II, spreading in uniform layers
with motor grader on prepared surface , mixing by mix in
place method with front end loader at OMC , and compacting
with vibratory roller to achieve the desired density ,complete
103 Providing, laying, spreading and compacting stone aggregates 133.00 Cum 1808.15
of specific sizes to water bound macadam (Grade-II) (B.T.
Metal of size 45 to 63 mm) specification including spreading
in uniform thickness, hand packing, rolling with 3 wheeled
steel/ vibratory roller in stages to proper grade and camber,
applying and brooming requisite type of screening/ binding
Materials to fill up the interstices of coarse aggregate,
watering and compacting to the required density.
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
104 Compaction and finishing of cement concrete road by trimix 825.00 Sqmt. 72.72
process providing extra labour charges for the trimix vaccum
dewatering service process on cement concrete road surface
by using vaccum dewatering pump floater surface vibrator
including making rough finish to surface as per in including
levelling the complete.
105 Supplying and fixing reinforced concrete heavy duty non- 50.00 Rmt. 660.00
pressure pipes with collars for culverts carrying heavy traffic
as per IS 458-1991 specifications including setting the pipes
in C.M. 1:2 watering and laying (to level or slopes) of class
NP3 of following internal daimeters.(i) 300mm dia.
106 Constructing Brick masonry road gully chamber 500mm x 20.00 Nos. 2017.20
450mm x 600mm including 500mm x 450mm C.I. horizontal
grating wih frame complete.
107 Providing and fixing pre-cast concrete kerb stone of gray 248.00 Rmt 404.06
cement based concrete block 30cm length,30cm height and
15cm thick of M200 grade concret as per approved design
and including excavation for fixing in proper line and
Level,filling the joint with C:M 1:3 (1cement:3fine sand) etc
108 Earthwork for embankment including breaking clods, 513.00 Cum 131.93
dressing with all lead and lift (including watering and
consolidation)(A) From Borrow pits within land width
109 Rolling and consolidation of soling including filling in 1458.00 Sqmt. 22.75
depression which occur during the process, with power roler
8 tonne to 12 tonne.
110 Supplying of yellow or Goradu soil with all lead and lift 438.00 Cum 505.00
including spreading watering dressing and rolling with hand
roller etc complete selected soil
111 Supplying of well rotted FYM manure with all lead and lift 22.00 Cum 378.75
including spreading mixing dressing and rolling with hand
roller etc. complete
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
112 Scarifying the surface of soil including spreading of DAP 1458.00 Sqmt. 26.26
fertilizer mixing with soil properly leveling ground dressing
113 Supplying and planting Dibbling semi carpet lawn at distance 1458.00 Sqmt. 90.90
of about 15 cm x 15 cm after proper anti termite treatment
and rolling the same by hand roller and watering etc complete
114 Bowling and developing flowering plants grown in nursery 20.00 Nos. 505.00
having approximate height 4 to 5 t or Height as per
Landscape Plan with natural growth and natural colour
planted in a lump of soil packed in polyethylene bag or
earthen pot including organic & chemical fertilizer pesticides,
fungicides, hormones & maintaining the plants up to three
months as Deserted Bottom Palm
115 Bowling and developing flowering plants grown in nursery 10.00 Nos. 656.50
having approximate height 4 to 5 t or Height as per
Landscape Plan with natural growth and natural colour
planted in a lump of soil packed in polyethylene bag or
earthen pot including organic & chemical fertilizer pesticides,
fungicides, hormones & maintaining the plants up to three
months as Deserted Triangle Palm
116 Bowling and developing flowering plants grown in nursery 30.00 Nos. 80.80
having approximate height 4 to 5 t or Height as per
Landscape Plan with natural growth and natural colour
planted in a lump of soil packed in polyethylene bag or
earthen pot including organic & chemical fertilizer pesticides,
fungicides, hormones & maintaining the plants up to three
months as Jasud
117 Bowling and developing flowering plants grown in nursery 20.00 Nos. 85.85
having approximate height 4 to 5 t or Height as per
Landscape Plan with natural growth and natural colour
planted in a lump of soil packed in polyethylene bag or
earthen pot including organic & chemical fertilizer pesticides,
fungicides, hormones & maintaining the plants up to three
months as Croton
118 Bowling and developing flowering plants grown in nursery 25.00 Nos. 85.85
having approximate height 4 to 5 t or Height as per
Landscape Plan with natural growth and natural colour
planted in a lump of soil packed in polyethylene bag or
earthen pot including organic & chemical fertilizer pesticides,
fungicides, hormones & maintaining the plants up to three
months as Deserted Croton
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
119 Bowling and developing flowering plants grown in nursery 15.00 Nos. 70.70
having approximate height 4 to 5 t or Height as per
Landscape Plan with natural growth and natural colour
planted in a lump of soil packed in polyethylene bag or
earthen pot including organic & chemical fertilizer pesticides,
fungicides, hormones & maintaining the plants up to three
months as Deserted Croton Petra
120 Bowling and developing flowering plants grown in nursery 15.00 Nos. 40.40
having approximate height 4 to 5 t or Height as per
Landscape Plan with natural growth and natural colour
planted in a lump of soil packed in polyethylene bag or
earthen pot including organic & chemical fertilizer pesticides,
fungicides, hormones & maintaining the plants up to three
months as Deserted Croton Petra Live Plant
121 Bowling and developing flowering plants grown in nursery 20.00 Nos. 101.00
having approximate height 4 to 5 t or Height as per
Landscape Plan with natural growth and natural colour
planted in a lump of soil packed in polyethylene bag or
earthen pot including organic & chemical fertilizer pesticides,
fungicides, hormones & maintaining the plants up to three
months as Deserted Golden Durenta Varigated
122 Bowling and developing flowering plants grown in nursery 30.00 Nos. 85.85
having approximate height 4 to 5 t or Height as per
Landscape Plan with natural growth and natural colour
planted in a lump of soil packed in polyethylene bag or
earthen pot including organic & chemical fertilizer pesticides,
fungicides, hormones & maintaining the plants up to three
months as Deserted Crotons Variety
123 Bowling and developing flowering plants grown in nursery 150.00 Nos. 35.35
having approximate height 4 to 5 t or Height as per
Landscape Plan with natural growth and natural colour
planted in a lump of soil packed in polyethylene bag or
earthen pot including organic & chemical fertilizer pesticides,
fungicides, hormones & maintaining the plants up to three
months as Deserted Green Mahindi
124 Bowling and developing flowering plants grown in nursery 40.00 Nos. 85.85
having approximate height 4 to 5 t or Height as per
Landscape Plan with natural growth and natural colour
planted in a lump of soil packed in polyethylene bag or
earthen pot including organic & chemical fertilizer pesticides,
fungicides, hormones & maintaining the plants up to three
months as Deserted Varigated Ficus
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
125 Bowling and developing flowering plants grown in nursery 35.00 Nos. 70.70
having approximate height 4 to 5 t or Height as per
Landscape Plan with natural growth and natural colour
planted in a lump of soil packed in polyethylene bag or
earthen pot including organic & chemical fertilizer pesticides,
fungicides, hormones & maintaining the plants up to three
months as Deserted New Black Ficus
126 Bowling and developing flowering plants grown in nursery 10.00 Nos. 45.45
having approximate height 4 to 5 t or Height as per
Landscape Plan with natural growth and natural colour
planted in a lump of soil packed in polyethylene bag or
earthen pot including organic & chemical fertilizer pesticides,
fungicides, hormones & maintaining the plants up to three
months as Deserted White Ribbon Plants
127 Bowling and developing flowering plants grown in nursery 150.00 Nos. 60.60
having approximate height 4 to 5 t or Height as per
Landscape Plan with natural growth and natural colour
planted in a lump of soil packed in polyethylene bag or
earthen pot including organic & chemical fertilizer pesticides,
fungicides, hormones & maintaining the plants up to three
months as Deserted Green Mahendi border
128 Bowling and developing flowering plants grown in nursery 23.00 Nos. 95.95
having approximate height 4 to 5 t or Height as per
Landscape Plan with natural growth and natural colour
planted in a lump of soil packed in polyethylene bag or
earthen pot including organic & chemical fertilizer pesticides,
fungicides, hormones & maintaining the plants up to three
months as Deserted Pendulla Asopalav
129 Bowling and developing flowering plants grown in nursery 50.00 Nos. 121.20
having approximate height 4 to 5 t or Height as per
Landscape Plan with natural growth and natural colour
planted in a lump of soil packed in polyethylene bag or
earthen pot including organic & chemical fertilizer pesticides,
fungicides, hormones & maintaining the plants up to three
months as Deserted Potted Plants
130 Labour charges for planting various plantsafler proper anti- 643.00 Nos. 70.70
termite treatment in pits including placing properly and filling
the pits with required prepared mix soil and watering and
dispporting etc. complete
131 Maintance of the garden for 60 days after Complition of 3 1.00 Job 25250.00
month stipulated period is completed for plantation of lawn
and plants including applying second round of proper anti-
termite treatment
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
132 Providing laying and jointing in true line and level 15mm dia. 50.00 Rmt 72.65
U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as
approved by Engineer In Charge. Pipe shall be fixed on the
wall with the help of clamp at every two metre C/C or shall
be concealed as directed including necessary fittings etc.
including testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials.
133 Rubber Hose Pipe 15 mm dia of approved brand and make 100.00 Rmt 90.90
134 Providing and fixing G.I. Nipple as directed 164.00 Nos. 50.50
135 Excavation for foundation upto 1.5 m depth including sorting 75.00 Cum 122.99
out and stacking of useful materials and disposing off the
excavated stuff upto 50 Meter lead.(A) Loose or soft soil
136 Providing & Laying Rain Water Junction Chamber of Clear 15.00 Nos. 6241.80
Internal Size 0.60 x 0.60 x 0.75m with excavation of size
1.36 x 1.36m & 0.15m thick M200 Bed Concrete Including
brick masonary 0.23 thick wall in C.M. 1:6 of 0.75m height
with 15mm thick Cement Plaster inside & outside (1:4),
x 1.06 RCC M200 top slab of thickness 0.15m with TMT
steel and 455mm x 610mm cast iron manhole cover with
frame weight not less than 35 kg as per directed by Engineer-
137 Providing & Laying Filter chamber of brickwork 0.23 thick in 15.00 Nos. 22067.49
C.M. 1:6 of clear internal size 2.04m x 1.20m x 1.20m and
excavation dimension of 2.80m x 1.96m x 1.35m including
C.C. M200 Bed Concrete 0.15m thick and RCC M200 Top
slab of thickness 0.15m with TMT steel, Including 15mm
(1:4) thick cement plaster inside & outside with Cement
slurry & top cover with frame of minimum weight of 35kg,
including filling filter material of 200mm thick each layer of
25-40mm, 10-20mm of BT metal and sand as per directed by
engineer-in-charge
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
138 Providing & Laying Water Harvesting Pit of clear size 2.00 1.00 Nos. 32558.36
mt x 2.00 mt x 4.00 mt. For water logging with excavation in
any strata upto four meter depth, Brick work 0.23 thick in
C.M. 1:6 of clear internal size 2.00m x 2.00m x 1.20m with
15mm thick C.M. 1:4 plaster, filling the pit with B.T. metal
40mm in 0.60 mt. depth with 25-40mm kaptchi, 0.30 mt.
depth and 2mt. depth with coarse sand in layers including
makng P.V.C. line for water inlet etc. as directed with 250mm
dia bore 15mt. depth amd 150mm dia PVC pipe of
Kg.f/cm2 casing wih gravel packing or as directed.
139 A Pump Room. Supply & fixing Diesel engine driven min. 2.00 Nos. 555500.00
pump of S5 mt. head and 137 M3/ Hr. capacity with
RPM diesel engine with battery charger. Base plate, AVM
pad etc. complete as directed including necessary concrete
platform as directed. (Make:-L)
140 Fire Pumps & Accessories, Yard Hydrant, Internal Hydrant, 2.00 Nos. 153924.00
Hose Reel & Sprinkler System Supply, Installation, Testing &
Commisioning of Main Fire Pump Of Capacity 20 H.P. with
55 mtr. Head, Pump
141 Supply, Installation, Testing & Commisioning of control 2.00 Nos. 90900.00
Panel suitable for automatic operation of fire fighting pumps
consisting (a) Necessary cabling, wiring, earthing from panel
to individual equipment shall be included in the quoted price.
(b) Facility for more selection i.e. auto or manual. (c)
Protection failure and control cabling. (d) Interlocking of
pressure switch with pumps.
142 Supply, Installation, Testing & Commisioning of 150mm dia. 2.00 Nos. 3535.00
Pressure Gauge of range 0 - 15 kg/cm3 confirming to as per
specification complete as required.
143 Supply, Installation, Testing & Commisioning of Pressure 2.00 Nos. 4545.00
Switches for automation of fire pumps, Pressure switches
shall be double pole, single throw type suitable for 3 phase
supply with diaphragm. Alluminium Enclosure with IP
protection as required.
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
144 Supply, Installation, Testing & Commisioning of the 40.00 meter 2390.67
following sizes of flanges jointed / screwed / welded, M.S.
Pipes of Class C ISI marked including accessories such as
MS bracket, U clamps with Anchor Fasteners, tees / elbows /
reducers / couplings / unions / bends / flanges etc. and laying
on the surface including painting with two coats of
anticorrosive primer and two coats of approved red enamel
paint after laying and testing after installation etc. as per
specifications complete as required.a) 150 mm dia.
145 Supply, Installation, Testing & Commisioning of the 50.00 meter 1711.95
following sizes of flanges jointed / screwed / welded, M.S.
Pipes of Class C ISI marked including accessories such as
MS bracket, U clamps with Anchor Fasteners, tees / elbows /
reducers / couplings / unions / bends / flanges etc. and laying
on the surface including painting with two coats of
anticorrosive primer and two coats of approved red enamel
paint after laying and testing after installation etc. as per
specifications complete as required. b) 100 mm dia.
146 Supply, Installation, Testing & Commisioning of the 10.00 meter 1277.65
following sizes of flanges jointed / screwed / welded, M.S.
Pipes of Class C ISI marked including accessories such as
MS bracket, U clamps with Anchor Fasteners, tees / elbows /
reducers / couplings / unions / bends / flanges etc. and laying
on the surface including painting with two coats of
anticorrosive primer and two coats of approved red enamel
paint after laying and testing after installation etc. as per
specifications complete as required. c) 80 mm dia.
147 Supply, Installation, Testing & Commisioning of the 50.00 meter 1100.90
following sizes of flanges jointed / screwed / welded, M.S.
Pipes of Class C ISI marked including accessories such as
MS bracket, U clamps with Anchor Fasteners, tees / elbows /
reducers / couplings / unions / bends / flanges etc. and laying
on the surface including painting with two coats of
anticorrosive primer and two coats of approved red enamel
paint after laying and testing after installation etc. as per
specifications complete as required. d) 65 mm dia.
148 Supply, Installation, Testing & Commisioning of the 50.00 meter 989.80
following sizes of flanges jointed / screwed / welded, M.S.
Pipes of Class C ISI marked including accessories such as
MS bracket, U clamps with Anchor Fasteners, tees / elbows /
reducers / couplings / unions / bends / flanges etc. and laying
on the surface including painting with two coats of
anticorrosive primer and two coats of approved red enamel
paint after laying and testing after installation etc. as per
specifications complete as required. e) 50 mm dia.
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
149 Supply, Installation, Testing & Commisioning of the 40.00 meter 858.50
following sizes of flanges jointed / screwed / welded, M.S.
Pipes of Class C ISI marked including accessories such as
MS bracket, U clamps with Anchor Fasteners, tees / elbows /
reducers / couplings / unions / bends / flanges etc. and laying
on the surface including painting with two coats of
anticorrosive primer and two coats of approved red enamel
paint after laying and testing after installation etc. as per
specifications complete as required. f) 32 mm dia.
150 Supply, Installation, Testing & Commisioning of the 70.00 meter 555.50
following sizes of flanges jointed / screwed / welded, M.S.
Pipes of Class C ISI marked including accessories such as
MS bracket, U clamps with Anchor Fasteners, tees / elbows /
reducers / couplings / unions / bends / flanges etc. and laying
on the surface including painting with two coats of
anticorrosive primer and two coats of approved red enamel
paint after laying and testing after installation etc. as per
specifications complete as required. g) 25 mm dia.
151 Supply, Installation, Testing & Commisioning of C.I. 4.00 No. 9738.42
Butterfly valve (PN 1.6) with flanges, nut bolts, gaskets
complete as required. a) 150 mm dia.
152 Supply, Installation, Testing & Commisioning of C.I. 8.00 No. 8932.44
Butterfly valve (PN 1.6) with flanges, nut bolts, gaskets
complete as required. b) 100 mm dia.
153 Supply, Installation, Testing & Commisioning of C.I. 8.00 No. 5555.00
Butterfly valve (PN 1.6) with flanges, nut bolts, gaskets
complete as required. d) 50 mm dia.
154 Supply, Installation, Testing & Commisioning of Cast iron 2.00 No. 9090.00
Dual plate Check valve (PN 1.6) a) 150 mm dia.
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
155 Supply, Installation, Testing & Commisioning of Cast iron 4.00 No. 7564.90
Dual plate Check valve (PN 1.6) b) 100 mm dia.
156 Supply, Installation, Testing & Commisioning S.S. Single 6.00 Nos. 5656.00
Headed Fire Hydrant Valve with 80mm N.B. Flanged inlet,
63 mm dia. Female instantaneous outlet type S.S. coupling,
blank cap, chain, twist release type lug & all accessories
Confirming to IS:5290. Including fixing with supports,
flanged tapping from wet riser, orifice plate.
157 Supply, Installation, Testing & Commisioning of Weather 6.00 Nos. 4595.50
proof standard M.S. Fire Hose Cabinet wall mounting type
(450mm x 450mm x 250mm deep) having single or double
opening with necessary locking arrangement by allan key
suitable for housing 1 nos. hose pipe, 1 nos. Branch pipe &
nozzle spanner.
158 Supply, Installation, Testing & Commisioning non 6.00 Nos. 5641.86
percolating rubber reinforced lined Fire Hose pipe (as per
IS:636) of 63mm dia and 15 mtr. Long. The hose shall be
rated for burst pressure pf 35.7kg/sqcm. Hose shall be
complete with ISI marked SS male & female coupling
(IS:903) bound & riveted to hose pipe with copper rivets &
1.5mm copper wire.
159 Supply, Installation, Testing & Commisioning of 63mm dia. 6.00 Nos. 5641.86
Instantaneous pattern SS 304, short branch pipe, 20mm dia
nozzle confirming to IS
160 Supply, Installation, Testing & Commisioning of First Aid 6.00 Nos. 6565.00
Hose Reel equipment conforming to 15:884 comprising of
hose reel drum, 8 mm shut off noz:z.le, Ru bber hose of
mm dia x 30 mtr. long, painting, swinging type fixing
bracket, anchor fastener, bolts & nuts etc.
161 Supply, Installation, Testing & Commisioning of SS Ball 6.00 Nos. 858.50
Valve. A) 25mm dia.
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
162 Supply, Installation, Testing & Commisioning of Cast Iron 2 2.00 Nos. 8585.00
Way Fire Brigade Inlet as per 1S: 904 having 63 mm dia in/et
with blank cap and chain with necessary fit ti ngs, flanges, nut
bolts etc. complete as required. (For Hydrant Network)
163 Supply, Installation, Testing & Commisioning of Gun Metal 2.00 Nos. 959.50
Air Release Valve with necessary fittings. Size: 25mm (For
164 Supply, Installation, Testing & Commisioning of Quartzoid 50.00 Nos. 454.50
Bulb type Sprinkler Heads. A) Pendent Sprinkler 57°C
165 Fire Alarm System Alarm panel Microprocessor based 8 zone 2.00 Nos. 16665.00
166 Manual Call Point 6.00 Nos. 454.50
167 2 core x 1.5 sqmm wire with pvc conduct and required 170.00 Rmt. 166.65
168 Smoke Detector 16.00 Nos. 1565.50
169 II) Fire Extinguisher and Exit Signages Supply, installlation, 4.00 Nos. 6447.84
testing and commissioning of Carbon Dioxide (CO2) type
Fire Extinguisher of 4.5 kg confirm to IS:15683, with ISI
marked / TAC approved fitted with required accessories
including wall suspension brakets.
170 Supply, Installation, Testing & Commisioning of ABC type 4.00 Nos. 2222.00
6kg confirm IS:15683, with ISI marked / TAC approved fitted
with required accessories including wall suspension brackets.
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
171 Signage Boards 4.00 Nos. 252.50
172 Excavation for foundation upto 1.5 m depth including 80.00 Cum 272.57
sorting out and stacking of useful materials and
disposing off the excavated stuff upto 50 Meter lead.(B)
Dense or Hard soil
173 Excavation for foundation for depth from 1.5 m to 3.0 m 27.00 Cum 498.93
including sorting out and stacking of useful materials and
disposing of the excavated stuff upto 50 Meter
lead.(C) Hard Murrum
174 Providing and laying cement concrete 1:5:10 (1- Cement : 5- 6.00 Cum 2566.77
fine sand : 10- graded brick bat aggregates 40mm nominal
size) and curing complete excluding cost of formwork in (A)
Foundation and Plinth
175 Half brick masonry in common brunt clay building bricks 29.00 Sqmt. 618.79
having crushing strength not less than 35 Kg/Sq.Cm. in
Cement mortar 1:5 (1- Cement : 5 -coarse sand ) in
foundation and plinth (B) Conventional
176 Providing and laying cement concrete flooring 1:2:4 (1- 40.00 Sqmt. 352.01
cement : 2-coarse sand : 4-graded stone aggregate 20mm
nominal size) laid in one layer and finished with a floating
coat of neat cement. (B) 50mm thick.
177 Providing 15mm thick cement plaster in single coat on Rough 175.00 Sqmt. 184.78
(Similar)side of single or half brick walls for interior
plastering upto floor two level and finished even and smooth
in (i) Cement mortar 1:3 (1-cement:3-sand)
178 Providing and Laying ordinary cement concrete 1:2:4 (1- 7.00 Cum 6888.15
Cement 2- coarse sand : 4- graded stone aggregates 20 mm
nominal size) and finishing smooth with curing etc. complete
including the cost of formwork but excluding the cost of
reinforsement for R.C.C work in (iii) Slabs having more than
10 cm and upto 13 cm. thickness
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
179 Providing and laying (to level or slopes) and jointing with 20.00 Rmt 317.48
stiff mixture of Cement Mortar in proportion 1:1 Salt glazed
stoneware pipes including testing of pipes and joints
complete.(B) 150mm dia.
180 Providing and Constructing sock pit of 2.46 mt. dia outside 4.00 Nos 35192.44
and 4 mt depth with honey combed masonary 3.50 mt. from
bottom and 0.60 mt. brick masonary in C.M. 1:6 top with
RCC slab cover of M200 vent pipe 1.8mt. Long 75mm dia &
C.I. cover and cowel vent etc. comp
181 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire 118.00 Pt 485.81
of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade
FRLS PVC insulated multi strand copper wires up to 10 mtr
length , in below type of pipe erected with 6A Modular type
switch / bell push & accessories and earth continuity of
following type, erected on PVC / Metallic/Wooden box,
single mounting base frame covered with
textured/metallic/white front plate modules erected on / in
wall / ceiling as per pipe erected, with necessary Lamp
holder/ceiling rose / H.D.Connector as directed.(f) with
medium class Rigid PVC pipe and accessories erected
concealed in wall/ceiling complete Cat. III
182 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire 24.00 Pt. 242.91
of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade
FRLS PVC insulated multi strand copper wires up to 10 mtr
length , in below type of pipe erected with 6A Modular type
switch / bell push & accessories and earth continuity of
following type, erected on PVC / Metallic/Wooden box,
single mounting base frame covered with
textured/metallic/white front plate modules erected on / in
wall / ceiling as per pipe erected, with necessary Lamp
holder/ceiling rose / H.D.Connector as directed.(f) with
medium class Rigid PVC pipe and accessories erected
concealed in wall/ceiling complete Cat. III BATH / W.C.
/TOILET Cat - III
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
183 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 38.00 Pt 674.68
sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS
PVC insulated multi strand copper wires up to 10 mtr length,
in below type of pipe erected with 6A Modular type switch
and hum free EME step type electronic fan regulator
mounted and accessories with earth continuity of following
type erected on PVC / Metallic/Wooden box, single mounting
base frame covered with textured/metallic/white front plate
modules erected on / in wall / ceiling as per pipe erected. with
necessary ceiling rose / H.D.Connector as directed.(f) with
medium class Rigid PVC pipe and accessories erected
concealed in wall/ceiling complete Cat. III
184 Point wiring for on board Looped Plug with 6A Modular type 68.00 Pt. 257.55
switch & 5 pin socket erected on PVC / Metallic/Wooden
box, single mounting base frame covered with textured /
metallic/white front plate modules erected on / in wall /
ceiling with following type accessories Cat. III
185 Providing following type of Modular Type Accessories 8.00 Ea. 160.59
mounted with PVC / metallic/Wooden box, single mounting
base frame covered with textured / metallic/white front plate
modules erected with necessary connections as per site
situation directed by Engineer In charge. (4) TV Co-axial
Socket outlet CAT-III
186 Providing following type of Modular Type Accessories 60.00 Ea. 180.79
mounted with PVC / metallic/Wooden box, single mounting
base frame covered with textured / metallic/white front plate
modules erected with necessary connections as per site
situation directed by Engineer In charge. (9) 16 Amp. SP one
way switch cat-III
187 Providing following type of Modular Type Accessories 60.00 Ea. 199.98
mounted with PVC / metallic/Wooden box, single mounting
base frame covered with textured / metallic/white front plate
modules erected with necessary connections as per site
situation directed by Engineer In charge. (10) 6/16Amp.
Universal socket cat-III
188 Providing following type of Modular Type Accessories 8.00 Ea. 280.78
mounted with PVC / metallic/Wooden box, single mounting
base frame covered with textured / metallic/white front plate
modules erected with necessary connections as per site
situation directed by Engineer In charge. (15) 32 Amps. DP
switch with Indicator CAT-III
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
189 Providing and erecting ISI mark Medium class RIGID PVC 960.00 Mtr. 24.24
PIPES of following size complete to be erected on/in wall or
ceiling erected with necessary PVC fittings & Junction boxes
fixed with adhesive solution & Clamps with following dia of
pipes, in approved manner as directed (a)20 mm
190 Providing and erecting ISI mark Medium class RIGID PVC 600.00 Mtr. 33.33
PIPES of following size complete to be erected on/in wall or
ceiling erected with necessary PVC fittings & Junction boxes
fixed with adhesive solution & Clamps with following dia of
pipes, in approved manner as directed (b) 25 mm
191 Providing and erecting Mains with 1.1 KV grade FRLS PVC 2887.00 Mtr. 82.82
insulated ISI marked stranded Copper conductor wire in
following type of pipe to be erected concealed in /flushed on
wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC
insulated stranded wire of green colour for earth continuity of
following size (A) With medium class Rigid PVC pipe and
accessories (b) 2 wire 2.5 sq. mm
192 providing and erecting Mains with 1.1 KV grade FRLS PVC 200.00 Mtr. 147.46
insulated ISI marked stranded Copper conductor wire in
following type of pipe to be erected in / on wall / ceiling with
2.5 sq. mm copper conductor FRLS PVC insulated stranded
wire of green colour for earth continuity of following size (A)
with medium class Rigid PVC pipe and accessories (b)
193 providing and erecting Mains with ISI marked, 1.5KV grade 4.00 Mtr. 142.41
electrolyte multi stranded, annealed copper conductor with
heat resistant PVC insulated conforms to IS 694, IEC -
erected in existing pipe of following size (Specifically for
control panel, relays, power switchgears, motor starters &
control wiring) with required size of copper lugs, nuts and
bolts if required. (g) One wire 16.00 sq. mm
194 Supplying and erecting Flexible PVC insulated multi strand 80.00 Mtr. 46.46
multi core 1.1 kv grade ISI marked copper wires of following
size to be erected as directed.(e) 1.50 Sq.mm 3 core round
195 Providing & Erecting approved make following size of TV 160.00 Mtr. 62.62
Co-axial flexible cable comprising inner conductor of solid
bare copper insulated with Foam PE & Secondary conductor
made of poly - Aluminium film bonded Al. Braids @ suitable
coverage overall sheathed with black PVC insulation. (e)
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
196 Providing & erecting Switch board for Computer or electric 20.00 Ea. 1133.22
apparatus consisting of following modular type accessories
mounted with PVC / Metallic concealed/open box with
single mounting base frame covered with textured/metallic
/white front plate,modules erected with necessary connections
1 no. 6A/16A universal plug-switch combined.
3 nos. 6A Switch
3 nos. 6A 5 pin Plug For Modular Type Accessories cat-III
197 Decorative call bell Ting-tong box type 250 volts complete 8.00 Ea. 71.71
198 Supplying and erecting LED indoor fittings with LEDs of 62.00 Ea. 373.70
wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,
with housing used as a heat sink shall be made of thick sheet
Steel conforming to IS: 513/CRCA/ aluminium die cast
powder coated and high U.V. & corrosion resistance with
diffuser with company mark/name 160V to 270V, Power
Factor more than 0.95, THD < 15%,
CCT 3000 K to 6500K,
Luminaire efficacy> 85 lumens/watt ,LED
LED driver efficiency > 85 %
( fitting required LM-79 & LM-80 Certificates)(NOTE:
Below description have shown ranges of Wattage capacity of
LED fittings.The Engineer incharge may select any wattage
capacity between the ranges shown.)(A) Tube Light with
integral driver (iv) 22-24 Watts, Surge - 2KV,IP-20,
conventional 4 feet cat III
199 Supplying and erecting led lamps with following wattage 56.00 Ea. 188.87
capacity of 220 to 240 voltage, minimum 15000 burning
hours life, 500 V in built-surge protection,Polycarbonate
diffuser, mounting suitable for E14 / E27 / B22 lamp holders,
(A) LED Lamps integral type, with PC diffuser suitable
LAMP holder (iii) 10 to 15 watts cat-III
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
200 Supplying and erecting LED street light / Flood light fittings 8.00 Ea. 4997.48
with High power White LEDs wattage of 3 Watt and above
assembled on single MCPCB, efficiency more than 130 lm/w
and corrosion free High pressure die cast aluminum housing
with smooth finish powder coated and heat sink extruded
aluminium with diffuser and Polycarbonate optics/ lenses,
with toughened glass with company mark/name engraved or
embossed 160 to 270 V,Power Factor more than 0.95, THD <
10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,
Luminaire efficacy> 100 lumens/watt . LED driver efficiency
> 85 %.( fittings required LM-79 & LM-80
certificates)(NOTE: Below description have shown ranges of
Wattage capacity of LED fittings.The Engineer incharge may
select any wattage capacity between the ranges shown.)(A)
Street Light (IP-65), Surge protection -4KV integral and
,Light must have 440VAC line supply with over-voltage
protection. (ii) above 48 to 60 WattsCat-lll
201 Supplying and erecting LED street light / Flood light fittings 12.00 Ea. 6088.28
with High power White LEDs wattage of 3 Watt and above
assembled on single MCPCB, efficiency more than 130 lm/w
and corrosion free High pressure die cast aluminum housing
with smooth finish powder coated and heat sink extruded
aluminium with diffuser and Polycarbonate optics/ lenses,
with toughened glass with company mark/name engraved or
embossed 160 to 270 V,Power Factor more than 0.95, THD <
10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,
Luminaire efficacy> 100 lumens/watt . LED driver efficiency
> 85 %.( fittings required LM-79 & LM-80
certificates)(NOTE: Below description have shown ranges of
Wattage capacity of LED fittings.The Engineer incharge may
select any wattage capacity between the ranges shown.) (B)
Flood Light (IP-65), Surge protection -4KV integral and
,Light must have 440VAC line supply with over-voltage
protection. (iii) Above 60 to 90 watts cat-III
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
202 Supplying and erecting LED street light / Flood light fittings 2.00 Ea. 4092.52
with High power White LEDs wattage of 3 Watt and above
assembled on single MCPCB, efficiency more than 130 lm/w
and corrosion free High pressure die cast aluminum housing
with smooth finish powder coated and heat sink extruded
aluminium with diffuser and Polycarbonate optics/ lenses,
with toughened glass with company mark/name engraved or
embossed 160 to 270 V,Power Factor more than 0.95, THD <
10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,
Luminaire efficacy> 100 lumens/watt . LED driver efficiency
> 85 %.( fittings required LM-79 & LM-80
certificates)(NOTE: Below description have shown ranges of
Wattage capacity of LED fittings.The Engineer incharge may
select any wattage capacity between the ranges shown.) (C)
Post Top Lantern LED fitting comprises of finish cast
aluminum spigot and spun aluminum canopy fixed with opal
polycarbonate, pipe arrangement for vertical mounting driver
and accessories wired upto terminal block.IP 65 (i)20- 30W
203 Pproviding and erecting Approved make Four pole moulded 5.00 Ea. 6173.12
case circuit breaker having breaking capacity ICU of 25 KA.
at 415 V,having normal current rating up to 25 A to 100A.
with Fixed thermal & magnetic release suitable to work on
A.C. supply 50 c/s. with all internal connections, spreader
tinned copper & complete erected in existing 16 G.M.S.
housing. ICS=100% of ICU only Cat III
204 Supplying and erecting triple pole & neutral 440V / 500V 0.50 Rn.Mtr. 1961.42
panel mounting Copper Busbars with four equal Nos. of
electrolyte bus having current density not more than 1.6 Amp.
/ sq.mm (Rated current / cross section area) duly wrapped
with colour insulating tape for phase sequence of following
current carrying capacity, erected with necessary bus bar
supports /insulators, main cable socket to each bar, erected in
existing cubical panel with necessary connections.(A)
Suitable for 100 Amp. Capacity
205 Supplying KITKAT pattern porcelain cut-out fuse with base 3.00 Ea. 278.76
of following current capacity erected on existing block
board.(v) 100 A. 500 V.
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
206 providing and erecting Miniature circuit breaker single pole 20.00 Ea. 270.68
0.5A to 2A system and having breaking capacity 10 KA to be
erected in existing box. confirming to IS 8828/1996 with ISI
207 providing and erecting Miniature circuit breaker single pole 80.00 Ea. 112.11
6A to 25A suitable to operate on 240 V A.C. system and
having breaking capacity 10 KA to be erected in existing
box. confirming to IS 8828/1996 with ISI Mark Cat.III
208 Providing & erecting 415 V MCB Four Pole for Motor & 2.00 Ea. 737.30
Inductive Load (C Curve) having 10KA breaking capacity &
confirms to IS :8828 in existing box having following
capacity (c)63 Amp. Cat.III
209 Providing and erecting Sheet Steel powder coated MCB 8.00 Ea. 1492.78
distribution board - flush / surface mounted fitted with
busbar, neutral link, earth bar and DIN rail, Conforms to IS
8623-1 & 3, IEC 61439-1 & 3 without MCB to house
appropriate nos. of MCBs.(The DBs should be used of same
company of MCB to be used) suitable for (A) single phase
incoming and horizontal single phase outgoing (b) sheet steel
double door (IP-43) (iv)12 way
210 providing and erecting Approved make RCCBs conforming 8.00 Ea. 2235.13
to IS: 12640 and having sensitivity of 30 mA and Short
Circuit withstand capacity of 10 KA and suitable for
operation on single phase 240 V,50Hz. having characteristic
of quick action & tripping with all advance feature & do not
incorporate any electronic component. for following Max.
rating erected as directed (ii) 40Amps. DP Cat.III
211 Providing and erecting Pipe type earthing having 150 8.00 Ea. 368.65
cms.long and 2.5 cms. dia. galvanised iron pipe with coupling
and buch buried in specially prepared earth pit complete with
necessary 8 SWG earth wire.
212 For using salt and charcoal / coke as required for pipe type 8.00 Ea. 171.70
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
213 Providing and erecting Annealed bare Copper wire 8 to 16 5.00 Kg. 794.87
214 Supplying & erecting earth pit of minimum bore dia.150mm 2.00 Ea. 4591.46
size approved make Earthing Electrode consisting Pipe-in-
Pipe Technology as per IS 3043-1987 made of corrosion free
hot dipped G.I.Pipes having Outer pipe dia of 50mm having
80-200 Micron galvanising, Inner pipe dia of 25 mm having
200-250 Micron galvanising, connection terminal dia of
12mm with constant ohmic value surrounded by highly
conductive compound with high charge dissipation suitable
for following type of applications with chamber and heavy
duty cover. (A)(approved make OEM has to submit test
certificate including value of earth resistance of installation
duly stamped and signed by agency and officer Incharge has
to ensure the value of earthing resistane mentioned in test
Certificate) & having back filling compound of (B) Inner
chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter
testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no
load & dry form, Sulphar content:- <2%(C) Back fill
Compound :- Earthing compound should be capable to retain
moisture for long time Necessary test report must be
submitted by Agency. (a) For Electrical Installation up to
440V in normal soil
Length of pipe - 1 Mtr
Back filling compound - 1 Nos Bag of 15 Kg.
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
215 Providing & erecting weather proof, dust & vermin proof, 1.00 Sq.Mtr. 10468.65
floor mounted front operated indoor type cubical panel board
necessary IP-42 and above protection as per approval from
engineer incharge made from 14 SWG thick CRC M.S. sheet
for outer body & doors, 16 SWG thick CRC M.S.sheet for
internal partitions with necessary accesories , supporting
angles/ flats channel including cutting, bending, drilling,
welding, riveting with internal partitions & cable alley as per
requirements & instruction of engineer-in-charge with
erection of supplied switch gears, BUSBARS, suitable size
of inter connecting PVC copper wire / copper-aluminium
strips, rubber grommets, rib, bakelite control fuses/MCB for
measuring instruments, earth bus & earth bolts, foundation
flange - bolts-base Plates, sufficient nos. of hinged doors,
handles with locking arrangement and rubber gasket,heavy
duty end terminal connection,danger notice board,necessary
ventilation,earthing strip complete. The Panel shall be
painted with epoxy powder coating. (The rates excludes the
cost of switchgears, bus bars, inter connecting mains &
Copper Aluminium strips, meters, Fuses etc. The dimension
shall be measured excluding base beams) The panel shall be
supplied with following approved manufacturers with
following size.(A) locally fabricated panel board (i) with
216 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured 150.00 Mtr. 183.82
cable multistrand Aluminium conductor for 1.1 KV. to be
laid on wall with necessary clamps or in existing trench /
pipe of following size of cables (A) 3 1/2 core 25 Sq. mm (
16 Sq. mm 1/2 core)
217 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured 30.00 Mtr. 220.18
cable multistrand Aluminium conductor for 1.1 KV. to be
laid on wall with necessary clamps or in existing trench /
pipe of following size of cables (B) 3 1/2 core 35 Sq. mm (
16 Sq. mm 1/2 core)
218 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured 420.00 Mtr. 126.25
cable multistrand / Solid Aluminium conductor for 1.1 KV.
to be laid on wall with necessary clamps or in existing trench
/ pipe of following size of cables (B) 4 core 6 Sq. mm
219 Making trench in soft soil of suitable width of 90 cm deep for 320.00 Mtr. 55.55
laying cable or locating the fault all over the run and back
filling the same and making the surface as normal ground.
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
220 Making trench in Hard Murrum / Tar Road of suitable width 10.00 Mtr. 74.74
of 90 cm or required depth for laying any size of cable or
locating the fault all over the run and back filling the same
and making the surface as normal ground.
221 Making trench in Hard Murrum / Tar Road of suitable width 10.00 Mtr. 357.54
of 90 cm or required depth for laying any size of cable or
locating the fault all over the run and back filling the same
and making the surface as normal ground. (B) If additional
machinery like hammer driller or JCB use [Add]
222 Drilling the road without breaking the road surface (Asphalt) 10.00 Mtr. 492.88
for laying of cable for feeding power supply by making up to
following size of holes at both ends complete. (A) Up to
223 Providing & laying approved make Double walled 360.00 Mtr. 62.62
corrugated pipes (DWC) of polyethylene(conforming to IS
14930 II )with necessary connecting accessories of same
material at required depth in existing trench for laying of
cable. below ground / road surface for enclosing cable (A)50
224 Providing and, fixing heavy duty flange type brass cable 18.00 Ea. 38.38
gland with rubber ring for PVC insulated armoured cable
complete with out going tails, insulating tape etc for
following size of cables.(B) 2 to 4 core 6 Sq. mm
225 Providing and, fixing heavy duty flange type brass double 2.00 Ea. 66.66
compression type cable gland with rubber ring for PVC
insulated armoured cable complete with out going tails,
insulating tape etc for following size of cables.(A) 3 & 1/2 /
226 Providing and, fixing heavy duty flange type brass double 2.00 Ea. 75.75
compression type cable gland with rubber ring for PVC
insulated armoured cable complete with out going tails,
insulating tape etc for following size of cables. (B) 3 & 1/2
core 35/50 Sq. mm
227 Solder less crimping type Aluminium lugs conforming to IS 160.00 Ea. 6.06
suitable for cable of following size evenly crimped with high
pressure tool & connected to switchgear terminals with
brass/cadmium plated nut bolts in an approved manner.(A)
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
228 Solder less crimping type Aluminium lugs conforming to IS 8.00 Ea. 15.15
suitable for cable of following size evenly crimped with high
pressure tool & connected to switchgear terminals with
brass/cadmium plated nut bolts in an approved manner. (C)
229 Solder less crimping type Aluminium lugs conforming to IS 8.00 Ea. 20.20
suitable for cable of following size evenly crimped with high
pressure tool & connected to switchgear terminals with
brass/cadmium plated nut bolts in an approved manner. (D)
230 Providing & erecting Approved make Power Saving 50 Watt 38.00 Ea. 1948.29
Ceiling Fan with double ball bearing ISI mark with
Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete
having 3blades with aluminium blades with , canopy &
cm. down rod erected with earthing.(Make shall be approved
by Engineer in charge))
231 Supplying and erecting 19 / 20 mm. nominal bore Medium 38.00 Mtr. 108.07
Class M.S. Pipe down rod erected duly painted for fan
complete with proper insulation without leakage and earthing.
232 Supplying & erecting fan hook box of 10 mm M.S. round 38.00 Ea. 108.07
bar bounded to the RCC bars up to 50mm length each side
and pierced through a 16 Gauge M.S. box / Heavy Duty PVC
box complete erected concealed in Ceiling with necessary
233 Providing 2.5mm.thick laminated acrylic sheet to cover the 38.00 Ea. 18.18
fan hook or Fan box.
234 Supplying & erecting approved make low noise decorative 16.00 Ea. 1366.53
exhaust fan having square frame ABS body with inbuilt
lowers & square frame.250mm with 1350 RPM Cat.II
235 Supplying & erecting Galvanized M.S pipe post “B” class 8.00 Ea. 4440.97
88.9 mm O.D 6 mtr. Long duly painted with two coats of
aluminium paint complete with metallic base- plate of
mm x 300 mm x 4mm thick for using as a compound light
pole with approx. weight 47 Kg.
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
236 Supplying & erecting approved make SMC press moulded 20.00 Ea. 476.72
composite FRP. loop-in, loop-out approx. 2mm thick box
complete with Bakelite connector strip 5way(3P+N+E),DIN
rail for mounting mob & hinged doors as per requirement
having locking arrangements with mounting clamp with nuts,
bolts & washers suitable for erection on pole with cable
clamps& earth bolt of following size of box. (C)150mm x
125mm x 100mm [deep]
237 Providing and erecting street light pole bracket comprising 8.00 Ea. 561.56
main B Class MS pipe of 4.2 cm/require outside dia.
complete with suitable B Class M.S. sleeve tubing of approx.
45cms.length and suitable for 76.5 mm / 80mm. / require size
pole top having sufficient fasteners for fixing the brackets and
having spread of 1 mtr. length with suitable rise as per site
condition & suitable welded stiffener reducer and nipple with
check nut complete painted with one coat of Red oxide / PU
base primer and two coats of Aluminium / PU paint. paint
with following nos of arms.[A] Single Arm bracket 1 Mtr
238 Providing 1:2:4 cement concrete foundation & 70 % PCC 8.00 Ea. 809.01
from bottom including excavation for the pole of size 45 x
x 100 cm. Deep in below ground level with plinth of 45 cm x
45 cm (or 45 cm dia x 45 cm) high upper ground level with
necessary curing and finishing in approved manner.
( for 4 & 6 mtr pole)
239 Supplying and erecting B class Galvanized iron pipe having 16.00 Mtr. 180.79
smooth finished bore of the pipe on both ends erected nuts
and bolts along the pole / wall shaping the pipe as per site
requirement. Pipe dia as following. (A) 25 mm dia
240 Supplying and erecting B class galvanised iron pipe 32 mm 12.00 Ea. 343.40
outside dia 45 cm long duly welded on 20 cm x 20 cm x
mm thick M.S. base plate, erected on wall or corner for
mounting street light luminaire with necessary hardware
materials duly painted.
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
241 Supplying & erecting IP 55 grade following size section pillar 1.00 Ea. 16691.26
fabricated from joint less M.S. Sheet with angle iron legs
made from jointless M.S. Angle with cable clamps to be
buried in ground to have appropriate erection to work
uniform until erected with cement concrete foundation and
cm high bricks work finishing with plaster etc. hinged double
door internally supported on both side, with internal and
outside looking arrangement with look and keys in duplicate
35 x 35 x 5 mm M.S. Angle of Two Nos. one is welded and
other with nut and bolt for erecting Bakelite sheet. Painting
the Section Pillar inside and out side with three tank powder
coated paint. section pillar roof should be without joint with
water leakage proof & tested as per IP 55 test & followed by
IS 2147 of 1962 (A) 150 X 90 X 75 cm section pillar
fabricated from 14 Gauge MS Sheet with angle iron legs
cm long made from 40 X 40 X 6 mm thick MS angle.
242 Supplying and erecting HYLAM sheet on existing angle iron 0.68 Sq.Mtr. 771.64
frame.for following thickness (B) 4mm
243 Supplying & erecting approved make Digital time switch 1.00 Ea. 3168.37
having lithium cell 6 years operative and operate battery
backup 1 channel day clock with 14 memory programme,
suitable to operate on 240V + 5%, 16A with, floating contacts
Minimum switching setup time 1 minimum & LCD display.
Also comprised permanent ON/OFF switching. Programming
switches & housed in fire proof thermoplastic enclosure &
transparent cover erected as required with necessary
connection erected as directed.
244 Supplying & erecting power contactor ,AC3 duty for time 1.00 Ea. 2782.55
switch complete erected as per direction Cat III (D) 4 pole
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
245 Supplying and erecting approved make panel mounting type 1.00 Ea. 1275.63
Digital Voltmeter having 3 digits LED display, 0 to 750 AC
Volts range erected on existing panel board with all
connection, wiring etc .with manufacturers calibration
246 Supplying and erecting approved make panel mounting type 1.00 Ea. 1558.43
Digital Ammeter having 3 digits LED display, external CT
operated, calibrated for 0 to 1000 Amps suitable to operate on
500 Volt AC , erected on existing panel board with all
connection, wiring etc .with manufacturers calibration
247 Supplying and erecting Ammeter / Voltmeter selector switch 2.00 Ea. 317.14
for 3 phase AC Supply 500 V on existing panel board with
necessary connections.
248 Providing & erecting L.T. Current Transformer with bar 3.00 Ea. 274.72
primary 50/5 to 1000/5 ratio 15 VA burden erected in existing
CRCA box duly secured with insulating materials connected
249 Supplying and erecting approved make suitable panel 3.00 Ea. 43.43
indicator LED type lamp, lens cover, complete erected with
necessary connections.
250 Providing & erecting open well horizontal mono block pump 2.00 Ea. 25987.30
set with cast iron body, complete for three phase submersible
motor having [E] For 7.5 HP 3 phase open well horizontal
mono block pump set suitable for 1550 LPM to 370 LPM @
13.5 Mtr to 42 Mtr head suitable for 65/75 mm dia delivery
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
251 Supplying & erecting approved make motor control cubical 2.00 Ea. 8710.24
panel (Direct - on - line) made from 16 G. CRCA sheet duly
epoxy powder painted inside and outside with hinged doors
and locking, arrangement consisting of suitable size of ON-
OFF isolator (AC - 3/23duty) main fuses, single phasing
preventer, indicating lamps for R- Y - B phases, overload
relay, Automatic water level controller, Ammeter, Voltmeter
each with two way selector switch incoming, wires duly
socket crimped, main contactor & overload relay, start - stop
push buttons, to be erected on angle iron frame grouted on
wall as directed. The isolator, overload relay & contactors
will be of L & T, Siemens or BCH make only.(B) DOL for
252 Lowering of submersible motor pump set at the depth of 2.00 Per Job 1284.72
following ,complete with required. Nos. and size of casing
pipes erected by means of proper chain pulley block & pipe
wrenches after checking of threads of each pipe with coupling
to take the load of the pump set and pipe assembly filled up
with water (D)For Open well Horizontal submersible pump
set for sump well (ii) 7.5HP to 15 HP
253 Providing and erecting ISI marked PVC insulated PVC 40.00 Mtr. 295.93
Sheathed Flat flexible Submersible copper cable approved
make of following Size. (E) 3 Core x 10 Sq. mm.
254 Supply of following size of TOP & BOTTOM accessories i.e. 2.00 Per Set 1900.82
Adaptor set (CI) long, pump guard set, starter pipe Rubber
ring for submersible pump & UPVC column pipe as directed
by Engineer - in - charge with necessary plumbing as desired.
255 Supplying of following size of HEAVY UPVC column pipe 50.00 RMT. 493.89
with coupler and wire lock [C] 65 mm dia
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
256 Supplying and erecting ISI marked sluice valve at position 2.00 Ea. 1558.43
with necessary material for following size of pipe
diameter.(E) 65 mm(2.5")
257 Supplying, & erecting C.I. swing, check type non-return 2.00 Ea. 1489.75
(Reflux) Valve -ISI marked suitable for following size (B)
258 Supply, Installation, Testing & Commissioning of following size of Grid Tied Solar Power Plant with
Solar Panels (ALMM approved): Frame Material : Anodized Aluminum alloy Frame With Twin Wall
Profile, Front Cover : High Transmission Low-Iron Tempered Glass (AR Coated), High efficency and
positive power tolerance Pmax: 0/+5, Module Efficiency should be approx. 19.5%-22%, Normal operating
temperature 45'C, Junction Box with Waterproof IP67 & MC4 Compatible and Enclosed with Bypass
diodes, 100% Electroluminescence test to ensure error free Modules, Thep. temp. co-efficient of the PV
module shall equal or better than -0.45%/degree C. Solar PV modules of minimum fill factor 75% to be
used. Unit Production:- More than 4.5 Unit /kw /day (Actual)(1Year Avg) With 10 year Product warranty
and 25 year Linear Power Warranty includes all mechanical and electrical parameters of the Solar panel.
Modules must be complied to the DCR(Domestic content requirements). The Ration of AC to DC is 5:6 for
the Installation capacity which are given in AC KW.
Solar Inverter: MPPT Range: MPPT Range: 80-1000 V , Max efficiency: 97.5% - 98.9%, O/p Frequency:
50/60Hz, Operating Altitude (m) ≤4000, O/p Power Factor: ~1, O/P THDi: <3%, Operating Tempreture
Range: -25~60°C, Integrated protection of Inverter are Anti-islanding Protection, Input Reverse Polarity
Protection, Insulation Resistor Detection, Ground fault protection, Residual Current Monitoring Unit,
Output Over Current Protection, Output Short Circuit Protection, Output Over Voltage Protection, PV array
string fault Protection. Protection Degree: IP65, User Interface LCD & APP, Datalogger & Communication:
GPRS / Wi-Fi. Integrated, Input Reverse Polarity Protection Integrated, Insulation Resistor Detection
Integrated, Residual Current Monitoring Unit Integrated, Output Over Current Protection Integrated, Output
Short Circuit Protection Integrated, Output Over Voltage Protection Integrated, Protection Degree: IP65,
User Interface LCD & APP,Datalogger & Communication: GPRS / Wi-Fi, Module Mounting Structure:
The mounting (Rectangular pipe / square pipe / circular pipe) with requisite cross bars, nuts and bolts, etc.
shall be Hot deep galvanized with minimum 80micron coating. The Rectangular / square /circular hollow
pipe section used for the structure should have a minimum thickness of 2.0 mm. other than above, the
material thickness should be minimum 2.5 mm. A certificate of a structural engineer certifying the strength
and stability of the mounting structure to withstand the weight and wind speed of 150 km/hour throughout
the life span of 25 years of the system, shall be submitted by the vendors. Hot Dipped Galvanized steel
coils. suitable arrangement for base plate for foundation , solar panel mounting, the structure should be
suitable for carry the load of solar panel,wiring, sprinkler system etc. with necessary foundation work/wall
mount, j bolt, anchor fastner etc. the nut bolt used for installtion of stucture should be (SS 304) quality.The
ground clearance of the bottom most edge of solar panel shall not be less than 300 mm to 1200 mm or as
per site’s technical/feasibility requirement.
a. Column –The minimum section (thickness) should be 60MM*40MM
b. Rafter - The minimum section (thickness) should be 60MM*40MM
c. Purlin - The minimum section (thickness) should be 40MM * 40MM Balane of System with necessary
Swichgears (Suitabel size and protection of ACDB & DCDB), inter connecting wiring, earthing system as
per the CEIG drawing approval, lightining arrester system as per the CEIG drawing approval, all liasoning
work with various gov. dipartment like state nodal agency,DISCOM & CEIG is included in agency scope
(Excluding All charges namely GEDA Application fees, Solar connectivity Charges, Meter connectivity
Charges, Meter testing Charges and system stability/strenthning charges.) (B) Grid Tied Solar Power
System: 7 - 10 kW (3 - phase)
Total Cost of Construction Cost
(Rupees Two Crore Sixty lakh Fifty Three Thousand Four Hundred Nineteen and Forty One Paise Only)
I/We am/are willing to carry out the work at ………………………………………………..% above/below (percent
should be written in figures and words) of the estimated rates mentioned above. Amount of my/our tender works out
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
I/We am/are willing to carry out the work at ………………………………………………..% above/below (percent
1 be written in figures and words)
2 of the estimated rates mentioned above.
*Estimated amount *Estimated amount
Put to tender Rs…26053419.41 Put to tender Rs.26053419.41
Deduct ……. % below Rs……………………..…. Add ……. % Avove Rs…………..….
Net Rs. …………………….… Total Rs. ………….…
The Contractor shall exhibit a board with detailed specification and details of work as directed by
the Engineer-In-Charge for which no extra payment shall be made.
2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done
3 GST and Income tax TDS will be deducted at a source while making payments of bills.
In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt.G.R.: PRC-
10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there
4 is a change as per actual mix design the cost of difference of cement consumption have been deducted from the
rate of original item at the rate of input rate mentioned in all the tender.
5 Dismentalling of Credit materials amounting of Rs. -0.00/- must be recovered from Contractor's respective
Deputy Executive Engineer Executive Engineer
R&B Sub Division R&B Division
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
SBD Book 2023 REVENUE QUARTERS B-TYPE and C-TYPE AT BHILODA.pdf
BOQ.pdf
02-2 Electrical Work - MOU.pdf
02-3 Electrical Work - Special Condition.pdf
02-4 Electrical Work - Elect. Sub. Con.pdf
02-5 Electrical Work - Sch_A.pdf
ARCHITECTURAL DRAWINGS.pdf
BUILDING WORK BOOKLET.pdf
Details Specification_.pdf
General Specification - State.pdf
GR - 1.pdf
GR - 2.pdf
GR - 3.pdf
GR - 4.pdf
GR - 5.pdf
GR - 6 - SBD Change.pdf
Specification Index_.pdf
Technical Specification electrical _1.pdf
WORK DETAIL.pdf
Download all tender documents and submit your bid