Construction of Mahatama Jyotiba Phule GITI Bahlolpur, Distt. Kurukshetra (CM Announcement No. 12583 dated 29.05.2016) (Pdg. Power Wiring Only).

Amount

1: - ( c ) Moulded case Circuit breakers. Supply and erection of moulded case circuit breakers on wall or on existing pedestal including bonding to earth and necessary connections. 15 amp.to 60 amp. 415 V ,10 KA 3-phase. 31.12 c (i)

: - 100 amp.to 220 amp.415 V,10 KA 3-phase. 31.12 c (ii)

2: - S/E of M.S. angle iron frame duly welded for housing M.S. sheet & main switches etc. on it, fixed on wall by means of suiteble size of rag bolts with cement concrete ,duly painted with three coats of approved paint including one coat of red oxide. Size 40 mm x 40 mm x 6 mm. 31.13(ii)

3: - M.S.Sheet . Supply and erection of 3 mm thick mild steel sheet duly welded on existing M.S. angle iron frame for fixing the main switches etc. as required, duly painted with three coats of approved paint including one coat of red oxide. 31.14 (i)

4: - (L)Miniature Circuit Breaker and Isolator. Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections. TP MCB of 9 KA breaking capacity 40 amp. to 63 amp. 31.17(a) (iii)

5: - (Q) Earthing Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required . 31.22(i)

: - Extra for using salt and charcoal / coke for pipe earth electrode as required. 31.22(ii)

: - Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required . 31.22(xii)

: - Pdg. and fixing 4.00 mm dia G.I.wire on surface or in recess for loop earthing as required . 31.22(xvi)

: - Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as equired. 31.22(iii)

: - Extra for charcoal or coke and salt for G.I. Plate or copper plate earth electrode. 31.22(v)

: - Pdg. and fixing 25 mm x 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode as required . 31.22(xi)

: - Pdg. and fixing 25 mm x 5 mm GI strip on surface or in recess for connections etc. as required with all labour and material. 31.22(xv)

: - Supply and erection of 20 mm x 3 mm thick G.I. tape fixed with suitable G.I. stapples of same size. 31.22(xix)

6: - Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections . 16 Sq. mm 4 Core Cable . 31.26 (xI) Ard.

: - 25 Sq. mm 4 Core Cable . 31.26 (xIi) Ard.

: - 50 Sq. mm 4 Core Cable . 31.26 (xIiii) Ard.

: - 95 Sq. mm 3.5 Core Cable . 31.26 (xxix) Ard.

: - 185 Sq. mm 3.5 Core Cable . 31.26 (xxxii) Ard.

7: - S/E of suitable compression type brass cable glands for underground Cable. 10 Sqmm to 16 Sqmm Cable 2 to 4 Core . 31.28 (ii)

: - 25 Sqmm to 50 Sqmm Cable 2 to 4 Core. 31.28 (iii)

: - 70 Sqmm to 95 Sqmm Cable 3 to 3.5 Core . 31.28(iv)

: - 120 Sqmm to 185 Sqmm Cable 3 to 3.5 Core 31.28 (v)

8: - (U)Bus Bar chamber (a) Copper . Supply and erection of metal clad bus bar chamber made from 1.6 mm thick M.S.sheet fixed with rag bolts on wall or on existing pedestal / angle iron frame including bonding to earth , detatchable top and bottom painting and necessary connections etc.(Copper bars duly tinned ). 100 amp. 4 bars of 55 cm each (cross section 25 mm x 3 mm) chamber over all size 60 cm x 45 cm x 18 cm . 31.31 (a) (ii)

9: - Supply and erection of double door sheet steel enclosures distribution boards suitable for MCBs and ELCBs etc. recessed in wall including bonding to earth with all labour and material requared complete the job in all respect upto the entire satisfaction of the Engineer-in Charge of the work. 8-way, TP & N (Vertical) (8+24) 31.41 (vii)

: - 12-way, TP & N (Vertical) (8+36) 31.41 (vii)

10: - Supply and erection of MS sadles and clamps on wall / RCC parapit for fixing underground cable at at distance of 0.60 metre centre to centre fixed by means of rawl plug including the cost of all labour and material required to complete the job in all respect. 31.48

11: - Supply and erection of MS stand made of 50cm×50mm×6cm angle iron frame and 150cm long, 30cm wide with MS sheet covering size 30cmx30cm 3.15mm thick fixed on the top of board & legs duly embedded in 1:2:4 cement concrete block 30cm below, ground level including the cost of cement sand welding, painting & fabrication charges etc up to the entire satisfaction of the Engineer-in-Charge of work 31.51

12: - Supply and erection of PVC pipe ISI marked (Medium) recessed in wall/ceiling etc including the cost of PVC bends inspecion boxes, iron hooks and cement concrete etc complete in all respect upto the entire satisfaction of engineer-in-charge of work PVC pipe of 40 mm dia 31.58

13: - S/E of mark double walled corrugated (DWC) HDPE pipe laid 1 Mtr. Below ground level including diging and refilling of earth including cost of suitable size socket cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to entire satisfaction of Engineer- incharge of the work. HDPE Pipe 145/123 outer dia / inner dia. 31.67 (iii)

14: - S/E of Module case circuit breaker single pole / 4 pole on wall/ on existing pedestal including bounding to earth and making necessary connection required to complete the job in all respect upto the entire satisfaction of Engineer in Charge of work. 4 pole MCCB 200 amp 31.69 vi

: - 4 pole MCCB 300 amp to 400 amp vii

: - Load Bank 8 way 400 Amp. iv

16: - S/E of cable tray made gut of 2mm thick galavanised perforated sheet steel including erection of the same on wall or ceiling with necessary fixture and other material required to complete the job in all respect upto the entire satisfaction of Engineer in Charge of work. 40 x 100 mm 31.81 i

: - 50 x 150 mm ii

: - 50 x 300 mm iii

17: - S/E of factory manufactureed cable tray cover made of 16g GI Sheet complete with Fastoner Nuts bolts and in position including all petty material required to complete the job in all respect upto the entire satisfaction of Engineer in Charge of work. Suitable for 40 x 100 mm 31.82 i

: - Suitable for 50 x 150 mm ii

: - Suitable for 50 x 300 mm iii

18: - Supply & erection of enclosure for MCCB 32/63 Amp. (Indo asian make) Complete with labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-charge of work. (similar make of L&T, Havells & Standard). NS- 1

M/S R K ELECTRICAL

malkhansinghelectricals

M R CONSTRUCTION COMPANY