Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | R1₹2.0 LAccepted-AOC CHAKKALAKUNNAN H KURUMBALANGODE VILLAGE CHUNGATHARA MALAPPURAM DISTRICT | R1 | Accepted-AOC low | |
| 2 | R2₹2.3 LRejected-Finance | R2 | Rejected-Finance high |
| Sl No | Description | Qty | Unit | ABDUL KAREEM L1 | A M YOOSAF L2 |
|---|---|---|---|---|---|
| 1.00Renovation | |||||
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 654.39 | kg | 187.05 ₹1,22,403.65 Lowest | 210 ₹1,37,421.9 |
| 1.00 | OD236861/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required. | 122.43 | sqm | 633.66 ₹77,578.99 Lowest | 660 ₹80,803.8 |
| 1.00 | OD283144/2025-2026:Providing and fixing on wall face square type (or nearest available) section uPVC rainwater gutter pipes of 150 mm(6inch) or nearest available, 4 kg/cm² pressure rating, conforming to IS:13592 Type A, including jointing (including all fittings such as end cap, end drop,etc. cutting, chamfering, joint lubrication if necessary) , securely fixed using galvanized iron (GI) brackets or clamps at max. 1.0 m intervals, leak testing, and making good the surface, complete in all respects as per manufacturers specifications and direction of the Engineer-in-Charge. (Modified DAR12.41.2) | 18 | metre | 559.21 ₹10,065.78 Lowest | 580 ₹10,440 |
| 1.00 | 50.18.9.18.2:Providing and fixing PVC pipes including fixing the pipe with clamps/Clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 4 Kfg/cm2 - External work - Exposed on wall | 6 | metre | 263 ₹1,578 Lowest | 320 ₹1,920 |
Tender Value
₹2.1 L
EMD Value
₹5,291
Closing Date
20 Sept 2025, 9:00 amClosed
ASWIN.P.VIJAYAN
ASWIN.P.VIJAYAN ASSISTANT ENGINEER OFFICE
SUB CENTER NAVEEKARANAM
2025_LSGD_790817_1
08/ETR/AE/LSGD/VLR/2025-26
Open Tender
Civil Works - Buildings
Item Rate
ASSISTANT ENGINEER OFFICE
PLEASE REFER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹555
Yes
₹5,291
Yes
28 Apr 2026
11 Sept 2025
22 Sept 2025
11 Sept 2025
20 Sept 2025
11 Sept 2025
Amount
Renovation
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
OD236861/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required.
OD283144/2025-2026:Providing and fixing on wall face square type (or nearest available) section uPVC rainwater gutter pipes of 150 mm(6inch) or nearest available, 4 kg/cm² pressure rating, conforming to IS:13592 Type A, including jointing (including all fittings such as end cap, end drop,etc. cutting, chamfering, joint lubrication if necessary) , securely fixed using galvanized iron (GI) brackets or clamps at max. 1.0 m intervals, leak testing, and making good the surface, complete in all respects as per manufacturers specifications and direction of the Engineer-in-Charge. (Modified DAR12.41.2)
50.18.9.18.2:Providing and fixing PVC pipes including fixing the pipe with clamps/Clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 4 Kfg/cm2 - External work - Exposed on wall
A M YOOSAF (BID ID -2347465)
Bidder Name
A M YOOSAF
ABDUL KAREEM
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1316994.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.05 MB
Tendernotice_2.pdf
PDF • 0.07 MB
Tendernotice_3.pdf
PDF • 0.07 MB
BOQ_1316994.xls
BOQ • 0.30 MB
PRE.pdf
Tender Documents • 0.08 MB
AFF.pdf
Tender Documents • 0.06 MB
FT.pdf
Tender Documents • 0.07 MB
SBD.pdf
Tender Documents • 1.77 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .