Composite tender for various works viz constrution of intake sump cum pump house on river jehlum providing laying and fitting of 150mm dia flanged rising main commissioning of PST and other works for WSS Ghulamyari Hastikhan

Amount

Earth work in excavation by manual means over areas (exceeding 30cm and up[to 1.5mtr in depth, 1.5mtr in width as well as 10 sqm on plan) including disposal of excavated earth upto 1mtr from cutting edge disposal earth to be levelled and neatly dressed . All kinds of soil

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc not exceeding 1.5mtr in width and for shafts wells, cesspits and the like not exceeding 10 Sqm on plan, depth upto 1.5mtr. All kinds of soil

Extra for every additional lift of 1.5m or part therof in excavtion/banking excavated or stacked material: All kinds of soil (ist lift)

Extra for every additional lift of 1.5m or part therof in excavtion/banking excavated or stacked material: All kinds of soil (2nd lift)

Extra for every additional lift of 1.5m or part therof in excavtion/banking excavated or stacked material: All kinds of soil (3rd lift)

Demolishing R.C.C work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer incharge.

Extra for cutting reinforcement bars manually/by mechanical means in R.C.C or R.B Work (Payment shall be made on the cross sectional areas of R.C.C or R.B work) as per direction of Engineer incharge

Construction of ring bund for construction of Intake channel/Sump incld. cost of E.C bags filled with earth/sand including excavating earth/Sand from barrow pits, filling in E.C bags, sewing, stitching, cost of empty cement bags placing in position in all conditions, in or under water. The job includes all types of carriages, leads and lifts and removing of the same all inclusive Complete job.

Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like

Supply, fabrication and fixing in position M.S edge cutter with M.S anchorage incld. welding and making provisions for fixing of reinforcement of well curbs as per approved drawings and technical specification and as per the instructions of Engineer incharge complete job

Sinking of well through all types of soil complete as per drawings and technical specification having inner dia 4.50Mtrs and outer dia 5.10 Mtr by way of making of plate form over well with loading/unloading of sand filled bags for required number of casting and engagement of skilled well sinker/Asstt. well sinker to a required depth as per the site condition and removal of the plate form as per the instruction of the Engineer's incharge complte job

Providing and laying stone soling hand packed on level incld. cost of stones incld. all carriages

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level 1 : 4 : 8 (1 cement : 4 fine sand : 8 graded stone aggregate 40mm nominal size) crushed. Incld. all carriages

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone) aggregate 20mm nominal size Crushed. Incld. all carriages

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering. All work upto plinth level. 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone agg. 20mm nominal size) Crushed incld. all carriages

Providing and laying in position specified grade of rein forced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement all work upto plinth level (1:1.5:3) 1 cement 1.5 corse sand 3 graded stone aggregrate 20 mm nominal mix.incld. all carriages

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc upto floor five level excluding cost of centering, shuttering finishing and reinforcement 1 : 1.5 : 3 ( 1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20mm nominal size). incld. all carriages

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1 : 1.5 : 3 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) incld. all carriages

Extra for laying reinforced cement concrete in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc, complete

Reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete (T.M.T bars) incld. all carriages

Centring and shuttering including strutting, propping etc and removal of form for: Foundations, footings, bases of columns etc for mass concrete

Centring and shuttering including strutting, propping etc and removal of form for: Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc

Centring and shuttering including strutting, propping etc and removal of form for: Lintels, beams, plinth beams, girders, bressumers and cantilevers

Centring and shuttering including strutting, propping etc and removal of form for: Suspended floors, roofs, landings, balconies and access platforms

Centring and shuttering including strutting, propping etc and removal of form for: Edges of slabs and breaks in floors and walls under 20cm wide

Extra for shuttering In circuilar work (20 % of respective centring and shuttering items): Walls (any thickness) including attached pilasters, buttresses, plinth and string courses

Providing and fixing tie bolt, spring coil and plastic cone in wall shuttering complete as per the direction of Engineer incharge. 20mm dia and 225mm length

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curling in: Cement mortat 1 4 (1 cement : 4 coarse san) incld. extra and incld. all carriages

15mm cement plaster on the rough side of single or half brick wall of mix: 1 : 4 (1 cement : 4 coarse sand) incld. all carriages

Cement concrete flooring 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone agg.) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc complete. 50mm thick with 20mm nominal size stone agg. Crushed incld. all carriages

Ponting on brick work or brick flooring with cement mortar 1 : 4 ( 1 cement : 4 fine sand) Raised and cut pointing

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fsteners shall be paid for separately): First class kail wood.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for seperately, all complete as per direction of Engineer-in-charge (Note:- Butt hinges and necessary screws shall be paid seperately). First class kail wood.

Providing and fixing 35 mm thick wire gauze shutters using galvanized M.S wire gauze of average width for aperture 1.4mm in both directions with wire of dia 0.63mm for doors, windows and clerestory windows with ISI marked M.S pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer incharge. First class kail wood

Providing and fixing ISIS marked oxidised M.S tower bolt black finish, (Barrel type) with necessary screws etc complete 100 x 10mm

Providing and fixing ISIS marked oxidised M.S tower bolt black finish, (Barrel type) with necessary screws etc complete 200 x 10mm

Providing and fixing oxidized M.S. hasp and staple (Safety) type) conforming to IS : 363 with necessary screws etc complete: 75mm

Providing and fixing oxidized M.S. hasp and staple (Safety) type) conforming to IS : 363 with necessary screws etc complete: 125mm

Steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc as required. In gratings, frames, guard bars, ladders, railings, brackets, gates and similar works.

Supplying and fixing rolling shutters of approved make, made of required size M.S laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.50cm long wire springs manufacture from high tensile steel wire of adequate strength confirming to IS 4454 part 1 and M.S top cover of required thickness for rolling shutters. 80x1.20mm M.S laths with 1.20mm thick top cover

Providing and fixing ball bearing for rolling shutters

Supplying at site angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10cm length and drilling holes upto 10mm dia etc complete

Providing and fixing G.I link fabric fencing of required width in mesh size 50x50mm including strengthening with 2mm dia wire of nuts, bolts and washers as required complete as per direction of Engineer incharge. Made of G.I wire of dia 4mm

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat pf approved steel primer all complete. Welded

Providing & fixing of colour cotted title type G.I sheet roofing including cost of JRL hooks, bolts and nuts 8mm diameter with biimin and G.I limpet washers filled with white lead 0.50 mm thick of approved colour and mate complete.

Applying priming coat: with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give and even shade.Two or more coats on new work

Providing and applying plaster of paris puty of 2mm thickness over plastered surface to prepare the surface even and smooth complete

Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade on new work. Two or more coats.

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30cm in depth, 1.5m in width as well as 10m² on plan) including disposal of excavted earth lead upto 50meters and lift upto 1.5m, as sirected by Engineer incharge. All kinds of soil

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m

Providing and installation including testing and commissiong of 1 cusec desludging VT Pump of standard make for a staging height of 5mtrs (especially Darling made) water requisite horse pipe and delivery pipe for a length of 100mtrs including having arrangement for electric supply, separate pannel board and starter etc required for operation of pump including all taxes etc payment of the item shall be made only after producing of VAT bill to be verified by the Engineer incharge complete job.

Providing and fixing of electro mechanciual equpiment for flash mixer with electricity driven steel blade churners with 1 HP 3 phase induction motor complete kirloskarn make to be paid in fixed & commissioned from complete job

Providing, installation and successful commissioning of M.S rotating desludging bridge moving on rail, central bearing, rotar etc fixed on peripherial beam of the clarifloculator with well designed M.S trusses frame with hand railing, chequered plate flooring complete job with suitable reduction gear arrangements coupled 5 HP 3 phase induction motor of kirloskar/greaves/Crompton incld providing fixing of churrnces inside floculator with 1 HP redcation gear to be paid in fixed & commissioned from complete job

Providing and laying of 150mm dia G.I flanged rising main incld. cost of pipe, M..S flanges nuts, bolts, rubber insertion, welding charges and laying in trenches complete as directed by site Engineer incharge

Electro Mechanical Works: VT Pumping Unit: Providing, installation, successful testing and commissioning of vertical turbine pumping unit driven by hollow shaft VT pumping unit of following parameters:• Site Condition:Altitude = 1580 Meters (AMSL)Ambient Temperature = +40°C to - 1Relative Humidity = 60% • Levels of site Bottom level of intake channel = Zero Meters Machine Floor level from bottom level of sump = 10 Meters • Type of water = Raw water having specific gravity of unity average • Quality of water = Raw water with silt having medium to coarse sand. A. PUMP 1. Discharge = 22000 GPH 2. Type = Self water lubricated, VT pump, open line shaft.3. Liquid to be handled = Raw Water 4. RPM = 14605. Head = 65 Meters6. Efficiency = Not less than 75%7. Impeller = Enclosed/semi-enclosed mixed flow all bronze8. Line shaft = Stainless steel9. Impeller shaft = Stainless steel 10. Line shaft bearing = Cut less rubber/Neoprene rubber 11. Line shaft coupling = Stainless steel 12. Suction Strainer = MS fabricated 13. Suction Bowl/Bell mouth= Cast Iron 14. Pump Bowl = Cast iron 15. Column pipe = Mild Steel 150mm dia, anti- corrosive and polished, of wall thickness not less than 8mm flanged type in assorted lengths. At least 10 Meters column pipes to be provided. 16. Make = WPIL / Kirlosker / M&P Pump bowl to be designed with minimum number of stages.B. Prime Mover 1. Type = Vertical hollow shaft, AC induction2. Power Supply = 03 Phase, 41 5V± 10% AC 3. Frequency = 50Hz±3% 4. RPM = 1450 Synchronous5. Efficiency = Not less than 85%6. HP = Corresponding to Head and discharge but not less than 50HP.7. Class of insulation = F or above 8. Type of duty = Continuous9. Motor thrust bearing = Anti-friction ball bearing10. Make = Kirlosker / ABB / Siemens The motor should be able to with stand fluctuations in voltage and to be conforming the latest ISS specifications.C. Accessories Pumping unit shall be provided with motor stool discharge elbow, non-reverse ratchet, coupling etc. as per standard specification. Besides all other accessories required for satisfactory performance of pumping units shall be provided, moreover cost of pumping set complete (VT pump/Electric motor/Accessories) as detailed above all told is inclusive of all taxes and duties state/central and carriage charges for delivery in the consignee's stores/ site. Original Manufacturer’s Test certificates in original to be provided with the material before installation.

Delivery Pipe Fittings: Providing, fabrication, installation and testing of 150mm dia GI B Class pipes 30 Mtrs with Flanges (18mm Thick flanges to be used), Bends and provided with necessary brackets and gaskets etc as per site requirement. There may be slight changes at site which will be provided by the site Engineer.

Control Valves and delivery manifold: Providing, installation, testing and commissioning of DI control valve viz,1. 150mm dia Sluice valve (PN 1.6) --- 02 No. 2. 150mm dia NRV (PN 1.6)----02 No. Make: VAG/ TALIS/Sigma flow The job includes cutting of pipe at site and fitting of the above valves as per requirement includes all required fittings viz. 18mm thick flanges, gaskets, nut bolts etc. Job also includes fabrication, providing, fitting and testing of delivery manifold Y-junction system fabricated out of above G I B class 150mm dia pipes. The job also includes fabrication, providing and fitting of 150mm dia G I B class bends including flanges, tabular flanges, increasers, reducers, nuts and bolts, gaskets as per site requirement. Job also includes painting of delivery manifold with one coat of red oxide and two coat of paint. (Colour as per direction of site engineer).Original Manufacturer’s Test certificates in original to be provided with the material before installation.

Manufacturing, installation and commission of, 250KVA, oil cooled L wound three phase, outdoor type 11/0.433 KVA conventional (non-seated) type distribution, transformer shall have core type construction, suitable for outdoor system as stop down transformer. The primary winding shall be connected in the delta and secondary winding in star with symbol (DYLL). The neutral of separate insulated terminal. The core shall be built up of high grade chrome annealed silicon steel laminators having low loss and coated with firmly with channeled frame to prevent noise and vibrations.The LV winding shall be circular and concentric with HV winding on the outside. The arrangement of winding should be robust in elect./ mechanical construction and should permit free circulation of oil to avoid hot spots. Adequate bracing shell be provided so that a strong self-supporting coils is obtained, no tapes shall be provided in the Winding Electrical grade epoxy dotted or other suitable insulations both for LV and HV windings. The transformer tank shall be made out of MS Sheet of minimum thickness 3.15mm thickness for sides and 5m thicknesses for top and bottom plate, suitable to withstand extreme pressure conditions. Primary coating and two coats of enamel paint should be duly painted on the tank. The transformer shall have a conservator tank provided with a drain plum-filling hole with cover. The cover shall be with 75x49 mm channel, with holes to make them suitable for mounting on plate/ plinth. The transformer tank shall be fitted with new 11 KVA grade T oil up to specific mark, the earthing terminals, two lifting lungs, rating and terminal marking plate, bi-metallic terminal connection for High Voltage/ Low V voltage side bushing level gauge, breather, duly valve should be provided to the transformer. Original Manufacturer’s Test certificates in original to be provided with the material before installation.

Distribution Cables: Providing, Installation, testing of multi-stranded copper conductor PVC insulated single core unsheathed 50mm sq. Copper cable for internal distribution wiring. The multi-stranded copper cable to be laid through PVC conduits on wooden plain boards fixed on walls with suitable plugs, nails and clamps. The job also includes termination of ends of cable with suitable rating of Cu. thimbles duly taped.Original Manufacturer’s Test certificates in original to be provided with the material before installation for stage 1st and 2nd Make: Havells/ National/Standard/Plaza/Imperial/ RR Cables.

Service Cables: Providing, laying, installation and testing of 3.5 Core, 120 sq. mm. Aluminum Conductor, PVC insulated, armored cable from distribution box of Transformer to the voltage stabilizer at both stages of the scheme. Job also includes providing and installation of aluminum Thimblings of appropriate ratings (24 No.) duly crimped and taped for stage 1st and 2nd Original Manufacturer’s Test certificates in original to be provided with the material before installation. Make: Havells/ Polycab/ Finolex/RR Cables

Motor cables: Providing, laying and testing of flat 3 core copper 25 sq mm S/ cable. The cable shall be PVC insulated and impermeable to grease, water and abrasion resistant. The job includes providing of copper thimblings as per requirements. for stage 1st and 2nd Original Manufacturer’s Test certificates in original to be provided with the material before installation. Make: Finolex/ Polycab/ Havells

Gantry:a) P/F of 3-ton chain pulley block with Mono rail Pull Lift/ Indef make having lifting capacity of 5m. Complete with U. clamps, chain, hooks and other allied fixtures. b) Fabrication / Erection of Channel iron column to act as support for resting of Chain Pully Block with Monorail as per following details:-Vertical Posts = ISMC 150 No. of vertical posts = 02 Nos. Vertical channel section each post = 02 Nos. vertical post bracing = ISMC 100 Sole / Matching plates = 500x300x12 mm Height of vertical posts = 4.5 M size of vertical post concrete blocks = 600x600x900mm Concrete grade = M20 welding Electrode = Overcord SS of Adore/ESAB/L&T Monorail Section = ISMB 200 length of monorailChain Pully Block with monorail = 3 Ton = 5M Steel Detail : i. ISMC 150 4.5Mx2x2 = 18 M @ 16.4kg/m = 295 kg ii ISMC 100 0.25Mx8x2x2 = 8 M @ 9.2kg/m = 73.60 kg iii Plate 0.500x0.300x8 (12mmthk) = 1.20 M²(12thk) = 112.80 kg iv Monorail ISMB 200 5 M @ 25.4 kg/M = 127kgs v Bolts/Nuts (L.S) = 20 kgs Total = 628.5 kg = 630 KG say

Illumination and other amenities: -Providing, manufacturing, installation and fitting of heat resistant toughened glass 60W LED street lights (04 Nos.) with following specifications: Power Consumption/ Rating = 60W Make = Havells/ Vinay/ Bajaj/ Syska Housing/ Bogy = Single piece Pr. Die cast Aluminum Alloy complete non dimmable, environmental friendly, weather proof, excellent aesthetics. Operating voltage = 140- 270V, 50Hz The street lights to be fixed on the galvanized steel poles (04 nos to be provided), octagonal type 8m each complete with required MCB (02 nos.) of 10 amperes, required cable of 1.5mm2 (copper wire multi stranded type) from MCB to light through PVC conduits. The MCBs to be housed in MS boxes. The steel poles to be provided with 2 MS arms for each pols for housing street lights. The job also includes providing, installation, fitting and testing of 40W LED lights (01 No.) with heat resistant toughened glass with following specifications: Power Consumption/ Rating = 40W Make = Havells/ Vinay/ Bajaj/ Syska Housing/ Bogy = Single piece Pr. Die cast Aluminum Alloy complete non dimmable, environmental friendly, weather proof, excellent aesthetics. Operating voltage = 140- 270V, 50Hz The job also includes providing and fitting of MCB of 10 amperes, required cable of 1.5mm2 (copper wire multi stranded type) from MCB to light through PVC conduits. The job also includes providing and installation of 5 No. 12 Watt LED Lamps along with holders and switches and fitting by providing 1.5 sq. mm copper wire as per site requirement. Providing and installation of 16 A sockets along with 4 sq mm copper wire as per site requirements. All wires, to be laid through double U channels along with clamps, screws and other accessories. -Providing and fitting of inverter cum battery (180AH) with 5 No inverter lumps with all accessories like wire holder, channels ,switches and lumps. -Providing of solar/ electrical lantern both chargeable in solar/electrical (Indus/Tata) (01 No.). -Providing of bedding including mattress, pillows, blankets and utensils as amenities to the pumping station staff as per requirements. Providing of tool kit consist of following items  Spanner set = 12 pieces of size 4/5,6/7,8/9,10/11,12/13,14/15,16/17,18/19, 21/23,24/26,24/27,30/32  Ring set = 12 pieces of same size as above  Pliers = 2 No`s (tappari/ jalani)  Cutting pliers = 2 No`s(tappari/jalani)  Screw driver = 2 No`s (tappari/jalani)  Hammer = 1 no of size 1 kg  Pipe wrench = 2 Nos of size 12 inches Mutimeter = 1 No L Keys = one complete set For Stage 1st and 2nd

Earthing: Chemical Earthing of all the electrical equipment’s like transformer, lightening arrestor, sub-station using Electrode as per load, 2 Meters long connected with desired sized Aluminum internal strip complete with excavation, civil works, cast iron cover with back fill compound as required. The said earthing pit shall be completed taking into account the load of the equipment’s installed at site in consideration, included is installation of required sized Aluminum strips from earthing station to all the installed equipment’s with all desired items required for stage 1st and 2nd