Procurement of Furniture and installation at the integrated Urban Primary Health Centre with Polyclinic at Plot No IIC BLK 22 of New Town Kolkata

Amount

Supply ,Fitting & Fixing of BIFMA Level 2&3, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified manfacturer Make FLIP TBL PU 1200W_600D RAL WH as per following specification. Table top: Table top is made of 25mm thk .MDF OSR .OSR board (Bottom side in white-collar) as per IS: 12406 which is having two finish options. Option I: PU coated on top side with the colour options as per colour chart. Under structure -Legs are made by welding the combination of M.S.E.R W. round tube 63.5x2mmTHK of IS: 7138, flanges made of CRCA sheet. Of 1.6mm THK and 1.2mm thk) of IS513.inside plates made of HR 5mm THK sheet (IS:2062). Assembly in epoxy polyester powder coated(Min40micron). Table Top folds upside at offset centre pivot provide on support bracket which is Aluminium alloy (ADC12) pressure die cast coated with epoxy polyester powder coated (min 40 micron) Table top connected with spring loaded mechanism with full handle made of sandwich tubes of M.S.E.R.W. 16*1.2mm THK. And 12.7*1.6mm THK. tube of IS7138.coated with epoxy polyester powder coated(Min40micron). To operate table top Legs are provided with casters of 65mm lockable type for Ease of movement and can be locked when required at any positions

Supply ,Fitting & Fixing of BIFMA Level 2&3, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified manfacturer Make Diva 7044T- Visitor Chair with Arm as per following specification. SEAT/BACK ASSEMBLY: The seat made from 1.2 ±0.1cm. thk. hot pressed plywood measured as per QA and back should be injection moulded from black Co-polymer Polypropylene upholstered with fabric and moulded Polyurethane foam together with seat and back covers. The back foam should be designed with contoured lumbar support for extra comfort. SEAT SIZE: 45.0cm(W) x 42.0cm.(D), BACK SIZE: 39.0cm(W) x 38.0cm.(H). SEAT I BACK COVERS: The seat and back covers should be injection moulded in black Co-polymer Polypropylene. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density = 45 +/-2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression. ARMREST ASSEMBLY (FOR 7044T): The armrests should be made of black integral skin Polyurethane wtih 50-70 Shore 'A' Hardness and reinforced with M.S. insert. The P.U. armrests should be then fixed to black powder-coated ( OFT 40-60 microns ) armrest brackets made of of 0.5 ± 0.05 cm. thk. HR steel and fitted with claddings made of injection moulded Polypropylene. FIXED TYPE mechanism: The fixed type mechanism should be without back tilt.TUBULAR FRAME: The tubular frame should be made up of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S. E.R.W. tube and black powder coated ( DFT 40-60 microns). Overall Dimensions of Chair: Seat Height -49.5cm, Height -88.5cm, Width & Depth of Chair as measured from pedestal - Width-56.0 cm and Depth-54.0 cm.

Supply ,Fitting & Fixing of BIFMA Level 2&3, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified manfacturer Make Storwel Plain Almirah as per following specification. Storwel plain shall have an overall size of 916mm(W)x486mm(D)x1980mm(H) with welded construction. It should have the shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. The Storwel Plain should have a Mazak handle and Three way locking mechanism with Shooting Bolts. It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of colour options and shelving options shall be available.

Supply ,Fitting & Fixing of BIFMA Level 2&3, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified manfacturer Make EXAMINATION TABLE ON RATCHET WITH NO STORAGE as per following specification. Overall dimension of L 1835 X W 600 H 850 mm. The backrest should have ratchet mechanism for tilting the backrest. Leg frames & intermediate frames should be made of ERW tubes having section of 30 x 30 square tubes with thickness of 1.6mm. Nylon 6 leg shoes should be given to avoid wear & tear. MS sheet metal lying surface of thickness 1.2mm should be used. Top sheet metal panel base frame of 25 x 25 ERW square tubes of thickness 1.6mm should be used. Ratchet should be made of MS Strip with section 40 x 4 to provide the backrest tilt. Anti microbial thermosetting epoxy powder coating should be used to fulfill the requirements of bacterial protection. All MS part should be powder coated with RAL white color & all plastic parts in grey. Safe working load must be 135kg.

Supply ,Fitting & Fixing of BIFMA Level 2&3, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified manfacturer Make EXAMINATION TABLE ON RATCHET MATTRESS 30 MM as per following specification. Providing and Supplying EXAMINATION TABLE ON RATCHET MATTRESS 30 MM The bed should be provided with 40 density 30mm thick PU foam mattress which should be covered by heavy helium material which is water proof, flame retardant, vapour & X-ray permeable. The zip & stiches for the mattress cover should be concealed. The mattress foam and cover to be divided in 2 sectionsThe manufacturer should compilant with ISO 9001, 14001, 13485 & OHSAS 1800 and CE certification.The work shall be carried as per the instructions of engineer in charge.

Supply ,Fitting & Fixing of BIFMA Level 2&3, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified manfacturer Make DOUBLE FOOT STEP as per following specification. Overall dimension should be 665 mm (L) x 485 mm (w) x 393 mm (H). Understructure frame should be made of 19 mm x 19 mm and 1.2 mm thick vertical tubes. The stool top should be made of 1.2 mm thick . The step top should have 3.2 mm thick rubber sheet to have better grip. load bearing capacity should e 135 kg. all tehmetal parts are pre treated and powder coated with epoxy polyester powder coating.

Supply ,Fitting & Fixing of BIFMA Level 2&3, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified manfacturer Make Three Fold Partition Screen as per following specification. Overall dimension: L 2637 X W 640 x h1720 MM. Frame should be made of ERW tube with movable plastic hinges. The fix frame should be made of 25.4 mm dia 1.2 mm thich ERW tube, the movable frame shouuld be made of 19.05 mm dia 1.2 mm thich ERW tube and the leg frame should be made of 30 mm suqare tube with 1.6 mm thick. The fixed portion should be 1075 mm width and the movable portion should be 778 mm width. 50 mm dia wheel castors should be provided. All MS parts should be powder coated with thermosetting epoxy polyester. Green color Casement fabric must be provided for modesty.

Supply ,Fitting & Fixing of BIFMA Level 2&3, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified manfacturer Make HEIGHT ADJUSTABLE SS TOP ROUND STOOL as per following specification. Overall Dimension: Overall Sizes Diagonal Leg Dia 538 mm H470 min-655max Top plate should made of SS 202 made sheet with spin section of thickness 1mm & should be non corrosive. It should have a diameter of 305mm, seat base should made of MS ring and rectangular tube. EN8 Screw having dia of 22 mm should be used for height adjustment of the seat base. The round hub should be made of MS ERW tube having dia of 38mm and thickness 2 mm. The Hub should be welded with the legs and it should accommodate and cover the lead screw mechanism. The understructure should consist of 4 legs made up of MS ERW tube of diameter 25.4 mm and 1.6mm thick. The press formed pipe leg should give a round & clean look. All the legs should be provided with 4 nos of Nylon-6 bush. All metal components should be pre treated with zinc phosphating in 9 tank porcess and then powder coated with anti microbial epoxy polyster powder coating to fulfill the requirements for bacterial protection against at least 2 commonly found bacteria in Hospital environment [Gram positive and Gram Negative]. Safe working load must be 135kg

Supply ,Fitting & Fixing of BIFMA Level 2&3, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified manfacturer Make Medicine Trolley as per following specification. Overall dimension: - 902(L) X 532(B) X 915(H) mm. Top shelf & bottom shelf should be made of SS304 sheet with 1mm thickness & 1.2mm. Rest of the components like supporting legs, horizontal bar handle should be made of SS 304 pipe having dia 31.8, 12.7 mm respectively. The castors of high quality plastic injected molded & anti static having the dia of 125mm should be used.Handles made of SS 304 pipe having section of 16mm & thickness of 1.2mm should be used.

Supply ,Fitting & Fixing of BIFMA Level 2&3, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified manfacturer Make Unlearn 1 Seater CPU / Laptop as per following specification. Unlearn 1 Seater The size shall be 900 Width mm x 600 Depth mm x 680 Height mm . Top shall be 25 mm thick , Base material shall be 25 mm thick pre-laminated particle board plus 2 mm thick PVC edge banding on straight outer edges . The Modesty shall be 18 mm thick its base material shall be 16 mm Plain particle board plus post - laminated with 0.6 mm top laminate on either side 2 mm thick and 0.8 mm thick PVC edge banding of matching colour on outer edges of modesty . Legs shall be made from 1.6 mm Matt silver anodized aluminiumn extrusion . Legs assembeled together with 8 mm thick MS Powder coated plate at top . The base support plate is having provision for wire entry and glide fixing . The wire carrying is facilitated through the hollow space between two leg extrusions and the wires are concealed between removable rigid PVC extrusion in the leg . Max . 20 nos. of Dia 6 wires can be passed through the space between two leg extrusions . Table Support brackets shall be powder coated table support brackets made from 2 mm thick MS sheet provided for overall product stability . Stopper shall be powder coated made from 1.5 mm thick aluminium extrusion fixed with work - surface by powder coated stopper bracket made from 3 mm thick MS sheet . Both ends of Aluminium extrusion covered with plastic moulded end cap . The Grommet shall be made from plastic moulded components to facilitate access electrical / data / voice sockets access from top . The Switch Mounting tray shall be powder coated made from 0.8 mm and 2 mm thick MS sheet fitted with modesty through which cables can be passed .

Supply ,Fitting & Fixing of BIFMA Level 2&3, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified manfacturer Make First Impression Reception Table 2 Arc Rubberwood Top with Arm as per following specification. Top shall be of Rubberwood with clean Matt PU finish 18 mm thick , inside radius - 700 mm , outside radius - 1350 mm and depth - 650 mm . Cork shall be 18 mm thick of rubber . Glass shall be Frostered 10 mm thick diamond cut finishing on edges , inside radius shall be - 1202.5 mm , otside radius - 1402.5 mm and depth - 200 mm . The Modesty Panel shall be MS Perforated sheet below worksurface : 0.8 mm (thick) x 665 mm ( height) x 1345 mm (flat length ) . Above Worksurface : 0.8 mm (thick ) x 260 mm (height) x 1345 mm (flat length) . The legs shall be of MS tube 1.6 mm thick diameter 50.8 mm and height 604 mm

Supply ,Fitting & Fixing of BIFMA Level 2&3, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified manfacturer Make Motion High Back Larger Seat - Adjustable Armrests as per following specification. The cushioned seat assembly consists of seat base moulded in glass-filled Poly-amide, moulded Polyurethane foam & upholstered with high stretch knitted polyester fabric. The cushioned back assembly consists of back inner moulded in Polypropylene in-situ moulded with Polyurethane foam & upholstered with high stretch knitted polyester fabric. Full Back Size : 45.5 cm. (W) x 53.0 cm. (H) *Seat Size :48.5 cm. (W) x 47.0 cm. (D) The HR polyurethane foam used in seat and back cushion is moulded in Density 45±2 kg/m3, and hardness load 16 ± 2 kgf as per 15:7888 for 25% compression. The seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi-dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjustments. The cantilevered seat offers impact cushioning while sitting and synchronises with the back movement during posture changes. The "5" shaped spines moulded in high strength glass-filled Poly-amide and the spine connector moulded in glass-filled Poly-am)de form the back-spine structure involved in multi-dimensional recline motion. The variable tilt angle recline motion can be adjusted with 3 position Tilt Limit feature which is inbuilt in seat base and the tension (return force) is user weight dependent. The assembly consists of armrest housing sliding over the armrest structure, both moulded in glass-filled Poly-amide. The height adjustment feature is button operated having adjustment of 6.6±0.5cm. The Armrest Top is made up of integral skin PU moulded over plastic inner moulded in glass-filled Poly-amide. The seating height can be adjusted with a pneumatic gas-lift having an adjustment stroke of 9.2 ± 0.3 cm The pedestal is injection moulded in glass-filled Poly-amide and fitted with 5 nos. in wheel castors. The pedestal is 66.0±0.5 cm. pitch centre diameter and 76.0±1.0 cm. with castors. twin wheel castors are injection moulded in Poly-amide having 5.0±0.1cm heel diameter and assembled to the pedestal. The powder coated (DFT 40-60 micron) tubular frame is cantilever type & lade of 02.54±0.03 cm x 0.3±0.016 cm thk MS ERW tube. Shoes are made of glass-filled Poly-amide and fixed the tubular frame. Dimensions measured out to out extreme point) on components in knockdown condition, variations within ±1.0 cm. (W)76(D)76*(H)99.5-108.8cm seat(H)44.5-53.8cm.

Supply ,Fitting & Fixing of BIFMA Level 2&3, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified manfacturer Make VSDU-8 as per following specification. Overall Dimensions of VSDU - 8 shall be 900mm(W)x450mm(D)x1830mm(H). The top shall be Metal top (1 mm add in unit height ) .The Rigid Knock Down Construction , Back , Sides and Door shall be made from 0.7 mm high yield strength CRCA ,rest in 0.8 mm CRCA . CRCA - 'D' Grade as per IS-513 . Sliding door arrangement shall have sliding door wth top hanging arrangement to prevent derailment . Each door shall be provided with 2 plastic roller having steel ball bearing for smooth movement of door & less noise .VSDU 8 shall have glass door for visibility of the content . Locking shall be 5 lever cam lock for safe locking . Handle shall be plastic flush & recessed handle . Shelving shall have Height wise adjustable shelf mounting . Uniformly Distributed Load Capacity of the shelf is 40 Kg maximum . VSDU - 8 shall have 4 no. of adjustable full shelves . Accessories optional shall be cradle with pipes for hanging instadex files . Leveler shall be screw type leveler with hex plastic base and overall finish shall be epoxy polyester coated to the thickness of 50 microns . For VSDU 8 - A4 size box file can be stored vertically on four shelves and clear space above fifth shelf is 220 mm .

Supply ,Fitting & Fixing of BIFMA Level 2&3, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified manfacturer Make Matrix 2 Str ,Comm Arm with Cushion as per following specification. SEAT SHELL : The seat shell should be a welded assembly of seat,back and side frame. The seat and back should be made of 0.12±0.013cm thk CR steel sheet with oblong perforations.They should be welded to sideframe of size 3.2±0.05cm x 0.5 ± 0.05 cm thk HR steel.The welded assembly should be powder coated ( DFT 40-60 microns ). The seat has a front water fall edge to provide popliteal clearance for comfortable seating. It also has a buttock support curve that not only provides rear support but also prevents small children from falling through the gap between seat and back. Clean and flat surfaces of seat and back aids in easy maintenance. SEAT SIZE : 47.8 cm (W) x 44.6 cm (D) BACK SIZE : 41.6 cm (W) x 23.0 cm (H). UNDERSTRUCTURE ASSEMBLY: Understructure assembly consshould be ts of connecting beam and leg assembly made of M.S. E.R.W. oblong tube of size 7.5±0.03cm x 2.5±0.03cm x 0.2±0.016cm thk.The welded structure assembly should be powder coated ( DFT 40-60 microns ).The leg assembly should be fitted with shoes and levellers in Nylon. The leg structure should be designed with minimal should be a of contact close to ground providing easy access for cleaning purposes. The shoes fitted to leg assembly help in aligning the structure for back to back arrangements. Levellers take cshould be of uneven flooring.Connecting beam should be fitted with snap locking end cap.lt also aids in side-by-side understructure alignment. ARM REST ASSEMBLY: Armrest assembly consshould be ts of armrest frame and armrest pad . The armrest frame should be made up of size 3.175±0.05cm x 0.47±0.027cm thk HR steel and it should be powder coated ( DFT 40-60 microns ). Armrest pad should be injection molded in Nylon and should be fitted onto the armrest frame.

Customized Wall Cabinet for Pharmacy Area to store medicines (CUSTOMIZED ITEM)

Providing and fixing 316 grade stainless steel motiff as per design including cost of materials, physical vapour deposition (PVD) coating in rose gold finished, transportation to site and fixing over the provided MS Frames/GFRC panells and civil structures. All visible supporting brackets to be off stainless steel and non visible brackets to be hundred micron hdg. It should be design to witstand the wind pressure of 2.5 kpa. All fastening and fixing materials should be off 304 grade and approved maked.

Supply ,Fitting & Fixing of BIFMA Level 2&3, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified manfacturer Make Stool Mch Ht Adj + back Hi Base as per following specification. SEAT ASSEMBLY: The seat should be made up of 1.2±0.1cm thick flat plywood and with moulded Polyurethane foam and should be .upholstered with replaceable synthetic leather covers. SEAT SIZE: Diameter 40.0 cm. ADJUSTMENTS: 360° Revolving type. BACK ASSEMBLY: The back foam should be designed with contoured Lumbar support for extra comfort. The upholstery should be available in synthetic leather. *BACK SIZE: 45.0 cm (W) covered with polyurethane foam. HIGH RESILIENCE (HR) POLYURETHANE FOAM:The_HR.polyurethane foam should be _moulded with density = 45 +1-2 kg/m3 and Hardness load 16 ± 2 kgf for 25% compression. HEIGHT ADJUSTMENT: The manual height adjustment should be very easy to operate with a help of a knob.. It can be easily locked at the most comfortable position. PEDESTAL ASSEMBLY: The five-prong pedestal should be fabricated from 0.2 ± 0.02 cm :thick HR sheet.( should be :. DD 1079 / HR ), powder coated ( DFT 40-60 microns ) and fitted with an injection moulded black Polypropylene Hub Cap and 5 nos. twin wheel castors. The pedestal-should be 55.0±0.5cm pitch-circle-diameter- (65.0±-1,0cm-with-castors).-Circular-foot-ring of 052.0±0.2cm made up of 01.9±0.2 x 0.12±0.0096cm thk MS ERW Tube for foot support in High-base stool. TWIN WHEEL CASTORS: The twin wheel castors should be injection moulded in Black Nylon. Overall dimensions shall be Width- 65.0cm, Depth- 65.0 cm, Height- 88.0 to 99.5 cm, Seat Height- 67.0 to 78.5 cm.

Supply ,Fitting & Fixing of BIFMA Level 2&3, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified manfacturer Make INSTRUMENT CABINET as per following specification. Overall dimensions of 900mmWx 1990mmHx450mmD and should have transparent doors and sides with steel frame work. Transparent portion of this cupboard should be made of Acrylic of 4mm thick. This cabinet should have 5 adjustable acrylic shelves each of 6 mm thickness. Three way lock should be provided of 6 levers. In the front door there should be 4 acrylic sheets and 2 each on both the sides. Metal used should be of CRCA and powder coated for finish. To be provided with rubber shoes to prevent direct contact of cabinet and floor.

Supply ,Fitting & Fixing of BIFMA Level 2&3, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified manfacturer Make AYUSH PLUS LITE SEMI FOWLER BED WITH CASTORS WITH REMOVABLE HEAD / FOOT BOARD IN PP as per following specification. Dimension: Overall dimension: (L) 2145 mm x (W) 990 mm x (H) 560mm.Function: Single function bed with adjustable backrest 70deg. Head board & foot board: Made of PP (Polypropelen).Bed frame: bed frame should be made of MS ERW rectangular section longitunal tube of size 30mmx60mm of 1.6mm thick. It should have provision 4 iv pole holders . It is strengthned by rectangular cross tube section of size 60mmx40 mm having 1.6 mm thickness. It is further strengthen by 25.4 mm sq tube with 1.2 mm thickness. Leg Under Structure ERW round tubes should be used with thickness of 1.2mm with section 31.75 mm. Lying surface: Lying surface should be made of CRCA sheet of thickness of 1mm thick . This lying surface should have 4 sections for bed profiling i.e. back adjustment, fixed pelvic section, upper and lower leg adjustment. Lower leg rest section is provided with Ratchet for leg rest adjustment. Mattress platform is strengthned by tubular frame of size 25.4mm dia x 1.2mm thickness. It should be strengthned by trapizodal contour ( rounded corner ) 14 nos, embossed cut out. All metal components should be pre treated with zinc phosphating and then powder coated with anti microbial epoxy polyster powder coating. Mechanism: All functions should be operated with lead screw mechanism, ACME threaded EN8 made 6mm pitch for easy in movment Castors High endurance, plastic injection molded castors of 125mm dia having provision for diagonal locking with stem dia 22mm should be provided for better stability. Powder coating. Anti rust, thermosetting epoxy polyester powder coating should be used. All powder coating should be in Ral White. Certifications: The manufacturer should compilant with ISO 9001, 14001, OHSAS 1800, ISO 13485:2016, USFDA and CE certification. Maximum weight Maximum safe working load must be 135 kg. Handle All the functions should operated with the help of single ergonomically dedicated handles, which are made of metal inserted PP co polymer , it's lever should be snap locked when not in use. All the handles should be provided operating guidence stickers welding. To ensure qood quality welding " Co2 Argon" process should be adhered to. Powder coating: All metal components should be pre treated with zinc phosphating in 9 tank porcess and then powder coated with epoxy polyster powder coating . packing Goods should be supplied in knocked down construction to reduce carbon emission. In house test treport: proof loading test , cycle tests , impact test, horizontal & vertical load tests for side rails, salt spray test, castor break test, pull test for head and foot board. Certifications: The manufacturer should compilant with ISO 9001, 14001, OHSAS 1800, ISO 13485:2016, USFDA and CE certification.

Supply ,Fitting & Fixing of BIFMA Level 2&3, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified manfacturer Make 2 SECTION MATTRESS 100 mm as per following specification. Dimension:- (L)1965*(W)830*(H)100 mm. The bed should be provided with 40 density 100 mm thick PU foam mattress which should be covered by heavy helium material which is water proof, flame retardant, vapour & X-ray permeable. The zip & stiches for the mattress cover should be concealed.

Supply ,Fitting & Fixing of BIFMA Level 2&3, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified manfacturer Make SS INFUSION STAND 5 CASTORS as per following specification. Infusion Pole can be mounted on all beds and is provided with telescopic IV pole. Overall dimension: Hook arm PCD dia 366mm x adjustable height from 1007 mm to 1300mm. The Infusion pole has 2hooks to hand the pumps and saline

Supply ,Fitting & Fixing of BIFMA Level 2&3, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified manfacturer Make Enterprise 1200 as per following specification. Enterprise 1200 Table without CPU Hanger size shall be 1200 Width mm x 600 Depth mm x 728 Height mm. Top shall be 18 mm thick Pre laminated particle board all work surface edges shall be having duly sealed with 2 mm thick PVC edgebanding. Understructure Modesty Panel 18 mm thick Pre laminated particle board . The Rectangular frame shall be fabricated component in 1.2 mm thick CRCA , Finish : powder Coat( epoxy polyster) . Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm thick MS ERW ATube ,finish powder coat ( epoxy polyster).The plastic cap for cable travel shall be injection moulded polypropylene and leveler glide for shall be nylon 6 & MS bolt. The storage shall be having shell and drawer tray 0.6 mm thick CRCA Finish powder coat (epoxy polyster) plus the drawer front shall be 0.8 mm thick CRCA Finish powder coat (epoxy polyster) plus lock with 10 lever and handle and leveller. The wire management shall be horizontal wire carrier 0.7 mm thick CRCA Finish powder coat (epoxy polyster) and vertical wire carrier 0.8 mm thick CRCA Finish powder coat (epoxy polyster) .

Supply ,Fitting & Fixing of BIFMA Level 2&3, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified manfacturer Make Arrive Back Unit as per following specification. The Size of the Back unit shall be 1000 mm width x 480 mm Depth x 2035 mm height. The back unit shall be made up of MDF board duly finished with veneer & final finish by PU coating. The mobile unit can be bought in multiples.PU coating hardness 1.5H.

Supply ,Fitting & Fixing of BIFMA Level 2&3, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified manfacturer Make Pisa 1 Seater Sofa as per following specification. SEAT FOAM‎: ‎The seat is made of PU ‎foam with Density ‎28‎± ‎2 ‎kg‎/‎cu‎.‎mtr having an ‎additional top layer of super soft ‎PU foam in Density ‎32 ‎± ‎2 ‎kg‎/‎cu‎. ‎upholstered with fabric ‎or leatherette‎. ‎BACK ‎FOAM‎: ‎The back is ‎made of PU foam with ‎Density ‎28 ‎± ‎2 ‎kg‎/‎cu‎. mtr with two additional ‎top layer of supersoft ‎ foam of density ‎32 ‎ ± ‎2 ‎kg‎ / ‎cu‎. ‎mtr‎, upholstered ‎ with leatherette finish.UNDERSTRUCTRE ‎: ‎Understructure is made ‎up of ‎1‎.‎2‎±‎0‎.‎1 ‎cm‎. ‎thick ‎hot pressed plywood ‎( moisture resistance & termite proof as per IS: 303) & pinewood of cross section devoid of major knots & surface defects 6 nos. per seat & 3.8 mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose 6 nos. per seat & 3.8 mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose. LEG ASSEMBLY‎: ‎It is ‎a welded assembly ‎made in Stainless steel ‎(‎grade SS ‎202‎) ‎tube ‎& ‎plate‎ with plastic endcap. (W) 86.0* (D) 90.5(H) 85.5 cm seat (H) 45.0 cm

Supply ,Fitting & Fixing of BIFMA Level 2&3, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified manfacturer Make Wish Standalone Partition of Height 5 Feet as per following specification. Wish Standalone partition is a modular system with thickness of 75mm and variety of functional and decorative finishes. Main Frame Structure: Wish Standalone Partition has main structure of combination of different Aluminum Sections made from Aluminum alloy 63400-WP and are powder coated with Epoxy Polyester or Anodized. The 52.4mm panel comprises of - 1) 2 nos. of vertical extrusions made of aluminum. 2) Horizontal extrusions made of aluminum at every division of tile/block. The numbers of these horizontal extrusions vary as per panel height. 3) Intermediate blocks made out of a composite construction of MDF and paper honeycomb. Numbers of these blocks vary as per panel height. 4) Fabricated bottom frame as a welded structure of steel components. 5) 2 nos. of bottom tiles. 6) Cover extrusions made of aluminum to cover the glass screen fixing details on panels. 7) These panels are supported on legs at bottom with levelers at various locations depending on the layout requirements

Supply ,Fitting & Fixing of BIFMA Level 2&3, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified manfacturer Make Matrix 3 Str ,Comm Arm with Cushion as per following specification. The seat shell should be a welded assembly of seat,back and side frame. The seat and back should be made of 0.12±0.013cm thk CR steel sheet with oblong perforations.They should be welded to sideframe of size 3.2±0.05cm x 0.5 ± 0.05 cm thk HR steel.The welded assembly should be powder coated ( DFT 40-60 microns ). The seat has a front water fall edge to provide popliteal clearance for comfortable seating. It also has a buttock support curve that not only provides rear support but also prevents small children from falling through the gap between seat and back. Clean and flat surfaces of seat and back aids in easy maintenance. * SEAT SIZE : 47.8 cm (W) x 44.6 cm (D) * BACK SIZE : 41.6 cm (W) x 23.0 cm (H) Understructure assembly consshould be ts of connecting beam and leg assembly made of M.S. E.R.W. oblong tube of size 7.5±0.03cm x 2.5±0.03cm x 0.2±0.016cm thk.The welded structure assembly should be powder coated ( DFT 40-60 microns ).The leg assembly should be fitted with shoes and levellers in Nylon. The leg structure should be designed with minimal should be a of contact close to ground providing easy access for cleaning purposes. The shoes fitted to leg assembly help in aligning the structure for back to back arrangements. Levellers take cshould be of uneven flooring.Connecting beam should be fitted with snap locking end cap.lt also aids in side-by-side understructure alignment . Armrest assembly consshould be ts of armrest frame and armrest pad . The armrest frame should be made up of size 3.175±0.05cm x 0.47±0.027cm thk HR steel and it should be powder coated ( DFT 40-60 microns ). Armrest pad should be injection molded in Nylon and should be fitted onto the armrest frame. The cushions for seat and back should be made up of 1.5 ± 0.1 cm thk foam on a flat MR grade ply 0.8±0.04cm thk and should be upholstered with leatherite. Overall Dimensions of Chair: Seat Height - 44.1 cm, Height - 78.5 cm, Width & Depth of Chair as - Width-169.5cm and Depth-63.8 cm.

Supply ,Fitting & Fixing of BIFMA Level 2&3, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified manfacturer Make Crash Cart as per following specification. .Overall dimension of L 1048 W x 475 H x 1555 mm . SS 304 grade made top sheet with 2mm thickness should be used. Middle & bottom sheet should be used made of SS 304 grade with thickness 1mm. SS 304 grade frame bar with section of 25.4, 19, 1.2 & 16mm should be used. SS Cylinder case should be used welded with cylinder holding unit to hook giving the curve bend at the bottom to hold the cylinder. SS 304 grade pipe of section 12mm should be used to provide provision to mount IV rod. High endurance anti static, plastic injected molded 4 swivel castors of dia 125mm should be used & should have provision for diagonal locking. SS 304 handle pipe should have section of 25.4mm with length of 365mm & should have thickness of 1.2mm giving a glossy finish. SS 304 tubular frame should have five different colored removable bins mounted on top shelf and two polystyrene lockable storage units with three drawers each. The top drawers should have containers of different sizes. Thermosetting epoxy polyester with semi gloss finish powder coating must be used. Safe working load must be 40kgs

Supply ,Fitting & Fixing of BIFMA Level 2&3, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified manfacturer Make Wallside Lab Table with Electrical Trunking, Wash Besin, Understorage & Overhead Storage Unit as per following specification. D-FRAME SYSTEM: All D-Frames assemblies should be manufactured from standard hollow metal sections; confirming to I.S. Code 7138:1973 (Indian Standard specification for steel tubes for furniture) and all sheet metal components should be of CRCA confirming to IS Code 513:1994. The suspended under-bench welded units should be supported on heavy-duty steel frames fully carrying the load of worktops. Its superior strength combined with aesthetically appealing end caps shall give maximum flexibility and modularity while making a layout. D-frame should be constructed from a square pipe with a cross section of 30mm x 30mm and should be a minimum 1.6 mm thick. The D-frame legs should be supplied with adjustable levelling screw (M-10 levelers of Nylon + MS, tolerance from -5mm to +15mm) to correct the unevenness of flooring. The tubular enclosed type construction shall discourage dust accumulation and unwanted development of bacteria & fungus. Drainage gradient should be well adjusted throughout the length of table and should have horizontal supports for drainage systems. It should be suitable for sitting and standing nominal heights of 750mm & 900mm respectively. The nominal table depths should be 450mm, 600mm, 750 mm for wall side and 1050mm, 1200mm, 1500mm for Island tables. The Corner Units shall fit well with 750mm & 900mm table depths. All frame-work is should be pre-treated with superior pure epoxy powder coated finish. The D-Frames structure should be for suspended storage cabinets. HORIZONTAL MEMBERS: These should be made from square pipes of 1.6 mm thickness. Cross-sectional dimensions of the pipe should be 30 x 30mm with a minimum of 1.6 mm. They should be made of CRCA MS and coated with pure epoxy powder. These connect two D-Frames together as shown using C-clamps/U-clamps. Together with the D-Frames and Horizontal Members connected together, the skeletal structure of the workbench is formed on which the worktop can be placed and the hanging-type storage cabinets can be suspended. Horizontal Members determine the width of the lab workbench as they form the member (distance) between two adjacent D-Frames. COVER PANELS: All leg-space panels, rear cover panels, island side panels etc. should be made from CRCA MS panels of minimum 0.8mm thickness with pure epoxy powder coating. WELDED UNDER-BENCH STORAGE CABINETS: Under bench cabinets are to be Pure epoxy powder coated with thickness of 40-60 microns and should be suspended from tubular structure. The cabinet should have a corrosion resistance magnetic strip as shutter catch, shutter and drawer are to be equipped with 180 degree cam lock. PP constructed semi recessed handle to be screw fitted to the shutters. Hinges are to be of SS-304 knuckle overlay type with 270 degree opening and 2 nos of hinges are to be screw fitted to each shutter and cabinet. WELDED OVER HEAD STORAGE CABINETS. Over head cabinets are to be Pure epoxy powder coated with thickness of 40-60 microns and should be fixed on the wall. The cabinet should have a corrosion resistance magnetic strip as shutter catch, shutters are to be equipped with 180 degree cam lock. PP constructed semi recessed handle to be screw fitted to the shutters. Hinges are to be of SS-304 knuckle overlay type with 270 degree opening and 2 nos of hinges are to be screw fitted to each shutter and cabinet. Unit Construction : It should be Welded body construction with load bearing members such as top, bottom and stiffeners should have a minimum thickness of 0.8 mm. Shelf : Should be made of 0.8mm thickness which should be adjustable to 6 steps of 50mm. Shutter should be over-closing type. It has a sandwich door construction with shutter front & shutter cover with 1.2mm thick hinge stiffener. Empty gap should with filled with 15mm thick paper honeycomb for sound dampening.

Supply ,Fitting & Fixing of BIFMA Level 2&3, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified manfacturer Make Slotted Angle Rack as per following specification. Slotted Angle Rack - Providing & supplying of slotted Angle Racking Systems are the most versatile of all storage systems commerci -ally available. The flexibility offered by this type of storage system is unparallel and can meet a wide variety of storage requirements. Slotted Angle Systems can be custom assembled for any storage requirement and can be dismantled in no time for reassembly somewhere else. The scalability of the system is very high that a two tier or even three tire systems can be made out of this basic components. Any typical slotted angle racking system consists of the following components. a) Angles b) Panels c) Corner Plates d) Fasteners (Nuts & Bolts)1. Angles : Material Specifications of Angles & Straps are IS: 5986 (ST 42). The length of the Angles shall correspond to the height of the rack. Overall unit dimension of 1800H x 450D x 900W, The thickness of the angles when made from sheet steel are not less than 1.6 mm. Angles are of rolled formed construction to ensure minimal residual stresses and accuracy throughout the length of the angles. The angles are free from twist, sharp edges and burrs. Angles are provided with holes at a pitch of 19.05 mm. The holes starts from 19 mm center from each edge. Straps are used for stability of the racks and the system. They are provided as required by the design of the system. sheets not less than 1.0 mm in thickness as the application warrants. Panels are provided with lipped flanges. Width of the flange being 31 mm and depth of lip 17 mm. Panels are provided with 9 mm holes on the flange for corner plates, cladding sheets and for fitting to the angles. 3. Corner Plates (Gussets) :Material Specifications of Corner Plates are IS : 513 D. Adequate numbers of Corner Plates are fitted to the rack to impart stability to the system. Corner Plates are made of 1.60 mm thick mild steel sheet and provided with black powder coated finish. 4. Nuts & Bolts : All fasteners like nuts, bolts, clips etc. are supplied in Galvanised condition for protection against environment and corrosion 5. Design of Components : The components are designed with a minimum factor of safety of 1.67 with respect to yield stress in accordance with IS : 800 & IS : 801. 6. Pre-treatment : All components of the system are supplied duly finished with Epoxy-Polyester powder coating after doing the surface treatment of all the items by using pre-treatment method as mentioned below. 6.1. Pre-treatment : All of the above mentioned processes are interspersed with rinsing with water of appropriate temperature. 6.2. Degreasing : Degreasing is carried out with the help of a two step chemical process within controlled temperatures. 6.3. The degreasing conform to the requirements of IS : 3194 / 6005 – 1980. 6.4. Phospha- ting : Phosphating is carried out by using Nipaphose 3456 additives within a controlled temperature. This process is carried out as per IS : 6005 and IS : 3618 Class D. 6.5. After phosphating, cold water rinse is done using two different tanks and one final rinse is done with de-mineralised water to remove all traces of retained chemicals. 6.6. Dry off oven treatment : The material will be dried up using drying oven at an air temperature of 125 deg C. 7. Final Finish : 7.1. Epoxy Polyester powder coating of approved colour and shade is applied to all components with an average dry film thickness not less than 35 microns. 7.2. The material components are oven baked within a controlled temperature as specified by Powder Manufacturer for a flawless finish. 7.3. The finish is as stronger as to withstand a 2H pencil hardness test.

Supply ,Fitting & Fixing of BIFMA Level 2&3, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified manfacturer Make Relish Table with SS top (1180W x 750D x 750H mm) as per following specification. Relish Table With SS Top 1200 W size shall be 1180 Width mm x 750 Depth mm x 750 Height mm . The top shall be in Stainless Steel brushed finish with PLB insert for Durability . Easy to clean and maintain hygiene . The Understructure shall have side frames shall be made from 30 mm x 30 mm x 1.5 mm thick MS Powder Coated tubes at base which are welded and are fixed to top with screws . The bottom ends are closed with plastic bottles .MS Shade : S/G Metallic Dark Grey . The Cross Member shall be made from 30 mm x 30 mm x 1.5 mm thick MS powder coated tube , which is welded and bolted to side frames .

Supply ,Fitting & Fixing of BIFMA Level 2&3, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified manfacturer Make Unwind Café Chair with SS Understructure as per following specification. The seat and back are made uo injection moulded high impact strenght polypropylene polymer compound with indoor graade UV Resistance.The tubular weled frame is made from Dia2.22 +/- 0.03cmx 0.12+/- 0.0128 cm and 3.5+/- 0.03 cm x 0.12+/- 0.0128 am stainless Steel 202 grade tube.The tube are buff polished to give shiny finish. cm. The Shoes are made of high impact strenght polypropylene polymer compond with indoor grad UV Resistance and pressed fitted with tubularfram. SIZE : (W)52.5cm*(D)55.8cm*(H)84.5cm*(seat H) 45.0 cm. Seat Size 52.5cm(W)*53.2 cm(D). Back Size 51.6 cm(W)*40.5 cm (H)

Supply ,Fitting & Fixing of BIFMA Level 2&3, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified manfacturer Make CONCLAVE 8 B.CONV (2400W x 1200D x 750H mm) as per following specification. Conclave 8 Recta 1200 D size shall be 2400 Width mm x 1200 Depth mm x 750 Height mm . Top work surface shall be 12 mm thick tougher glass with back painted design on to under side and crystal edge polish finish . The construction shall be Knock down Construction . The Understructure shall have all panels made from 36 mm thick Pre-laminated board with 2 mm thick PVC edge beading . Understructure also consists of storage for CPU , projector and paper storage . Provision for glass adjustment for glass aligning . The Wire Management shall have Legrand electricals used for wire management on tocentre support beam panel and CPU storage area for socket connections ,RJ11,RJ45 .

Supply ,Fitting & Fixing of BIFMA Level 2&3, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified manfacturer Make Cross Chair with Headrest as per following specification. . SEAT/BACK ASSEMBLY: The seat is made up of 1.2 + 01cm thk hot pressed plywood measured as per QA method described in OCP-QLTA-PL14-18 The Back is made up of injection moulded glass filled nylon & upholstered using Micro mesh fabric with high tenacity yarn with 28 density foam Sandwich in lumbar area. SEAT SIZE(Larger Seat Depth) : 47.0 cm. (W) x 51.5 cm (D). BACK SIZE : 45.0 cm. ”(W) x 65.3 cm. (H). HIGH RESILIENCE (HR) POLYURETHANE FOAM The HR poly methane seat foam is moulded with density 45+/-2 kg/m" and hardness 16 + 2 kgf as per IS:7888 for 25% compression. ARMRESTS : The adjustable armrest is designed with the folIowing features. Up-Down adjustment— 8 steps (8.0+0.Scm range). Height adjustable armrest structure which is Powder Coated & fitted with an armrest top. Fixed Armrest Top is PU moulded over metal insert. LUMBAR SUPPORT ASSEMBLY: The Lumbar support consists of polypropylene pad The Height of Lumbar pad can be adjusted through two projecting knobs provided on the rear side of the pad Lumbar pad has an adjustment of 8 0 + 0.5 cm in height.FRONT PIVOT SYNCHRO MECHANISM: The adjustable tilting mechanism is designed with the following features. 360° revolving type. Single point control. Front-pivot for tilt with feet resting on ground ensuring more comfort. Tilt tension adjustment. 4-position locking with anti shock feature. Seat/back tilting ratio of 1:2. NECKREST . The Neckrest assembly consist of polypropylène pad with moulded polyurethane foam & covered with polyester fabric. Neckrest is fixed to Back Assembly through Neckrest connector. Neckrest assembly has height adjustment of 4.2 + 0 5 cm and rotation adjustment of overall 76”+ 2 . The complète neckrest assembly is retro Ut to the main chair. PNEUMATIC HEIGMT ADJUSTMENTT: Tne pneumatic height adjustment has an adjustment Stroke of 10.0+-0.3 cm. PEDESTAL ASSEMBLY: The pedestal is injection moulded in black 3G% glass-filled Nylons and fitted with 5 nos. twin wheel castors. The pedestal pitch-center dia is 66.1 + 0.5 cm (76.1 + 1.0 cm. with castors). TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in black Nylon.

Supply ,Fitting & Fixing of BIFMA Level 2&3, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified manfacturer Make Cross Chair without Headrest as per following specification. SEAT/BACK ASSEMBLY: The seat is made up of 1.2 + 01cm thk hot pressed plywood measured as per QA method described in OCP-QLTA-PL14-18 The Back is made up of injection moulded glass filled nylon & upholstered using Micro mesh fabric with high tenacity yarn with 28 density foam Sandwich in lumbar area. SEAT SIZE(Larger Seat Depth) : 47.0 cm. (W) x 51.5 cm (D), BACK SIZE : 45.0 cm. ”(W) x 65.3 cm. (H). HIGH RESILIENCE (HR) POLYURETHANE FOAM The HR poly methane seat foam is moulded with density 45+/-2 kg/m" and hardness 16 + 2 kgf as per IS:7888 for 25% compression. ARMRESTS : The adjustable armrest is designed with the folIowing features: Up-Down adjustment— 8 steps (8.0+0.Scm range). Height adjustable armrest structure which is Powder Coated & fitted with an armrest top. Fixed Armrest Top is PU moulded over metal insert. LUMBAR SUPPORT ASSEMBLY: The Lumbar support consists of polypropylene pad The Height of Lumbar pad can be adjusted through two projecting knobs provided on the rear side of the pad Lumbar pad has an adjustment of 8 0 + 0.5 cm in height.FRONT PIVOT SYNCHRO MECHANISM: The adjustable tilting mechanism is designed with the following features. 360° revolving type, Single point control, Front-pivot for tilt with feet resting on ground ensuring more comfort, Tilt tension adjustment, 4-position locking with anti shock feature, Seat/back tilting ratio of 1:2. PNEUMATIC HEIGMT ADJUSTMENTT: Tne pneumatic height adjustment has an adjustment Stroke of 10.0+-0.3 cm. PEDE STAL ASSEMBLY: The pedestal is injection moulded in black 3G% glass-filled Nylons and fitted with 5 nos. twin wheel castors. The pedestal pitch-center dia is 66.1 + 0.5 cm (76.1 + 1.0 cm. with castors). TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in black Nylon.

Supply ,Fitting & Fixing of BIFMA Level 2&3, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified manfacturer Make TOPAZ TABLE 1650 with ERU 1200 & Pedestal as per following specification. Primary Work Surface Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Softclosing access flap with in-build power box are provided on work surface for wire management. Secondary Work Surface Made of 25mm thick MDF one side pre-aminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Modesty Panel Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Under structure Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Integrated Pedestal Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Pedstal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestal is provided with lock for security.

Supply ,Fitting & Fixing of BIFMA Level 2&3, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified manfacturer Make TOPAZ BACKUNIT 1650W 1100H as per following specification. Top Panel-Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Slide Door Unit-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping for body panels like side, bottom,back and shelves. Shutters are made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Shutters have a soft closing & anti slam mechanism. Handles are provided for ease of opening.Storage is provided with lock for security

Supply ,Fitting & Fixing of BIFMA Level 2&3, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified manfacturer Make Oxbo Visitor Chair as per following specification. SEAT ASSEMBLY: The seat assembly should be made up of 1.2 ±0.1cm. thick hot-pressed plywood , upholstered with fabric upholstery covers and moulded Polyurethane foam. SEAT SIZE: 47.0 cm. (W) x 48.0 cm. (D). BACK ASSEMBLY: The back asembly. should be made of powder coated (OFT 40-60 microns) tubular frame of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. MS ERW tube designed with contoured lumbar support for extra comfort. The back should be upholstered using double layer spacer mesh fabric with high tenacity yarn. BACK SIZE : 46.5 cm. (W) x 60.5cm. (H) .HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression. ARMRESTS: The one-piece armrests should be injection moulded from black Co-polymer Polypropylene. TUBULAR FRAME: The powder coated (DFT 40-60.microns) tubular frame should be cantilever type & made of Ø2.54 ±0.03cm. x 0.2 ±0.016cm thick M.S.E.R.W. Tube. Overall Dimensions of Chair: Seat Height - 46.5cm, Height - 93.5cm, Width & Depth of Chair as measured from pedestal - Width-61.0 cm and Depth-64.5 cm.

Supply ,Fitting & Fixing of BIFMA Level 2&3, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified manfacturer Make Upbeat 1050 x 600 Workstation as per following specification. . Understructure : MS powder coated. Prelaminated particle board 25mm thick with 2mm thick PVC lipping. E1 level board which helps to reduce VOC emission by minimum of 40%. Toolbar : 1. Accessory strip is a metal strip which is used as magnetic strip as well as mounting rail for accessories with Fabric screen . 2. H rail for hanging accessories with glassscreen Leg : Swing legs are fabricated from MS ERW Tube 50mm x 25 mm x 1.2mmthk (as per IS: 7138 ERW) along with a PDC (Swing leg corner PDC) part made from Aluminum alloy, which is connected to the worktop and cross members.This is a three dimensional leg which has inclination in 2 planes, it has a ball socket M8 leveler with bottom translucent cap, that allows adjustment up to 50 mm height. Screen : Options are given below : Fabric T- mould screen : This screen is made of block structure (3mm thk MDF board + batten made of 12mm thk MDF board + 3 mm thk MDF board) Honey comb block is used to fill in the void space. Groove of 3 mm is provided on the periphery. This groove is to accommodate the fabric pasted on either side to be tucked in and allow a PVC Flexible T-Mould to give a clean edge. The Fabric screens are upholstered with Hot-melt glue. ii. Fabric T- mould removable screen : Construction of Fabric Tmould removable screen is same as Fabric T- mould screen, In addition removable screen has a turned pin made from Ø 12 MS rod (as per IS : 432) which is glued to the screen. Sleeves are mounted on the pin made from Thermoplastic Elastomer (TPE). Removable T mould fabric screen not offered for 1650 and 1800 worktop. When removable T mold screen is offered in back to back, the Aisle workstations will be provided with Fabric T mold screen cum modesty. These are available as End and shared screens in two heights 650 and 800mm. iii. Laminated glass -This Glass screen is made from 3.5 mm clear annealed + 1 mm PVB film + 3.5 mm clear annealed. Access Flap: Access flap is made from Aluminum extrusion, PDC parts made from Aluminum Alloy and plastic parts made from Nylon 6 and wire brush with nylon bristles. Metal modesty : Metal modesty is made from 0.8 mm thick CRCA. Internal tapped stud is welded to the modesty for mounting. Metal and wooden modesty are mounted on the worktop with the help of the modesty mounting brackets made of 3 mm thick HR. Modesty terminates at 400 mm from ground. Wire Management : Wire Tray with integrated power box made with a combination of 0.6 mm thick CRCA outer body and 0.8 mm thick CRCA switch plate (8+3 Anchor Roma) module cut out as standard. These are mounted either on leg lateral members or cross member with bracket made from 3 mm thick HR. Integrated power box wire tray available for shared, end and aisle end conditions.

Supply ,Fitting & Fixing of BIFMA Level 2&3, Greenguard (UL), Greenpro, AIOTA, Greenco Platinum Certificate, ISO 14001:2015, 9001:2015, 45001:2018, 50001:2011, 13485:2016, Indoor Advantage Gold, Indian Design Mark, GRIHA, Indoor Air Monitoring Report Certified manfacturer Make OXYGEN CYLINDER TROLLEY as per following specification. MS Oxygen cylinder trolley suitable for B type oxygen cylinder. The overall dimension should be 410 mm (L) x 375 mm (W) x 1112 mm (H).The main frame should made of 25.4 mm dia 1.6 mm thick ERW tube with 10 mm dia ms made locking rod to keep the cylinder position during transit. The trolley should be provided with 100 mm dia 25 mm thick PU wheel for longer durability. LDPE made leg bush should be provided on the legs. Max load bearing capacity should be 50 kg.

KOLKATA INTERIORS PRIVATE LIMITED

SANKAR FURNITURE