CA NO. CWE BLY / GE(E) / 67 OF 2022-23 ADDITION / ALTERATION AND SPL REPAIRS OF 24 QUARTERS OF JCOs/OR MD ACCN AT MIL STN HEMPUR UNDER GE(E) BAREILLY

Amount

Taking down cement plaster any description on brick, PCC block or stone wall etc including racking out joints hacking for key scrubbing down with water etc. complete all as specified and directed.

M&L rendering 15mm thick in CM 1:4 in two layers of 10mm and 5 mm each including using WPC @ 2 % by weight of cement in finishing layer on brick or concrete surfaces finished even & smooth complete all as specified and directed by Engr-in-Charge

M&L rendering 10mm thick in CM 1 : 6 on brick masonary surfaces finished even & smooth without using extra cement complete all as specified and directed by Engr-in-Charge

M&L 5mm thick rendering in CM 1:3 as on ceiling finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for roughening the surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc including for brushing neat cement slurry @ 3 Kg per square meter complete all as specified and directed.

M&L for non skid ceramic tiles 9 to 10 mm thick (square / rectangular )area of each tiles exc 0.18 sqm but not exceeding 0.38 Sqm in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match with coloured tiles complete all as specified and directed

M&L for non skid ceramic tiles 9 to 10 mm thick (square / rectangular )area of each tiles exc 0.18 sqm but not exceeding 0.38 Sqm on vertical surfaces etc set and jointed in neat cement slurry and pointed in coloured cement to match with coloured tiles complete all as specified and directed.

M&L for vitrified glazed ceramic dark shade/ double charged / ultra charged tiles 10 mm thick square/ rectangular) polished area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for vitrified glazed ceramic dark shade/ double charged / ultra charged tiles 10 mm thick square/ rectangular) polished area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm as in vertical surfaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles complete all as specified and directed.

M&L Non- skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surface 350X250X7mm/450X350X7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25 mm thick bull nosed over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engr-in-Charge.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dedo and pillar laid over cemant screed and jointed complete all as specified and directed by Engr-in-Charge.

M & L 25 mm thick PCC 1:2:4 type B0, using 12.5mm graded aggregate as in floors to receive surface of tile complete all as specified and directed.

M&L for screed bed of badding layer of mortar 15mm thick screed bed in CM 1 : 6 for receiving floor finishes complete all as specified and as directed.

M&L for 15mm thick rendering in cement mortar 1 : 4 on brick/concrete surfaces etc to receive floor finishes complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n exc 15 cm thick (below or above GL) complete all as specified and directed.

M&L for 100mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base floor/pavings complete all as specified and directed.

M&L PCC 1:3:6 type C2 using 20mm graded stone aggregate as in surface channels/drain including forming fair finished to drain channel complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth complete all as specified and directed.

M&L PCC 1:3:6 type C2 using 20mm graded stone aggregate as in plinth protection/path etc (100mm thick) finishing the surface even & smooth without using extra cement complete all as specified and directed.

Demolition of reinforced cement concrete as in roofs, slabs, floors(other than ground floors) beams, staircases, landing, chajjas, and similar works reinforcement cut as required to facilitate as demolition complete all as specified and directed.

M & L RCC 1: 2 : 4, type B1 using 20 mm graded stone aggregates as in slabs on walls, Chajja, beams and columns in floors, roofs, landings, balconies, selves, canopies, deck slabs and in shelves, Manhole cover, chajja and the like etc complete all as specified and directed.

M & L Mild steel TMT bars 10mm dia and overs, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or secured with clips including welding new to old (if required) complete all as specified and directed.

All as per item 25 above, but 5 mm dia and over upto and including 10mm dia in Stirrups, spacers and binders complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick (Horizontal or sloping) rough finished surfaces of concrete complete all as specified and directed.

Formwork to edges of concrete flats, treads, breaks in floors, windows, cills, concrete railings, openings in concrete walls, floor and roofs n. exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar works exc 10 cm but n. exc 20 cm wide rough finished of concrete complete all as specified and directed.

M&L 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete over and including 20 mm thick screed bed or bedding layer in CM 1:6 finished even and rough complete all as specified and directed.

Taking down chowkats or frames exc 1.5 Sqm and n.exc 4 Sqm (without taking off shutter from the frames) and removal from site complete all as specified and directed by Engr-in-Charge.

Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed by Engineer-in-Charge.

Taking down of wooden shutter of any description area exc 1 sqm and n. exc 2 sqm and removal from site complete all as specified and directed by Engr-in-Charge

Taking down shutter and refixing with easing cutting or necessary repair in same opening of any description exc. 1 sqm but n.exc 2 sqm each complete all as specified and directed.

Supply and Fix second class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned and joints complete all as specified and directed by Engr-in-Charge

S&F pressed steel frame of size 125 x 60mm for door with one or more rebates including necessary fixing, lugs, hinges,lock ,strike plate, etc complete all as specified and directed.

S&F 2nd class hard wood, 35mm thick plain framed, panalled shutter (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medioum density wood particle board with commercial face veneers fitted to chowkats all as specified in SSR-Part-I Section - 8 Clause 8.20 (a) for doors complete all as specified and directed.

S&F II nd cl hardwood, glazed and skelton shutters factory made 35 mm thick open rebated and prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I Section 8, Clause 8.20 (a) supplied and fitted to chowkats complete all as specified and directed.

S&F Powder coated aluminium sliding windows frame with movable shutter ( sliding on minimum two PVC roller of best quality, for each shutter on three tracks with stainless steel mosquito proofing and glazing shutter and incl 5.50 mm thick glass & stainless steel wire mesh fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below- (i) Window frame :68.4x38mm X 1.15 mm thick for three tracks. (ii) Top/bottom rail and style / rail of shutter : 15x37.5x1.15 mm thick and over. (iii) Aluminium beading - 0.7mm thick (iv) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperature 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium wire staples complete. (v) Aluminium fittings such aluminium suitable handle with auto interlock cap with suitable size . (vi) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed.

S&F Powder coated aluminium ventilators box type with louvers & wire mesh fixed with neoprene rubber gasket, aluminium beading, clips. Frame made with powder coated aluminium section of size as appended below (i) frame :45.2mm x35mm X 1.15 mm (ii) Aluminium beading - 0.7mm thick (iii) Glass louvers depth 6 inch. Blade Angle: 38 degrees and thickness of blade 2.02 mm with 106.25 mm spacing. (iv) Aluminium neccessary fittings complete as required. (v) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed.

S&F mild steel window grills box type framed work as in window guard bars, grills or forged into spikes, framed balusters, walkway railing and similar work including welding complete FE-290 grade E-165 all as specified and directed.

S&F PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC Sheet reinforced with M.S. Square tube all as directed and specified by Engr-in-Charge

S &FF in frame factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' Channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail and bottom rail on either side & as gap insert for top rail and bottom rail.Panelling of plain colour PVC sheet to fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet Beading and joined together with solvent cement, complete all as specified and directed by Engr-in-Charge

S&F 75 mm size stainless steel butt hinges fitted of PVC door shutter complete all as specified and directed.

S&F 125 mm size aluminium handle cast type,anodised complete all as specified and directed.

S&F 150 mm long aluminium anodised,barrel tower bolt of extruded section complete all as specified and directed.

S&F 100 mm size mild steel butt hinges medium weight cold rolled complete all as specified and directed.

S & F 150 mm size mild steel pressed handles oval type, stove enemalled black type complete all as specified and directed by Engr-in-Charge

S&F 200 mm size mild steel barrel tower bolts stove enamelled black with bright bolt and fixed complete all as specified and directed. by Engr-in-Charge

S & F 300 mm long mild steel sliding door bolts plate type, stove enamelled black with bright bolt not less than 16 mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on staple plate complete all as specified and directed.by Engr-in-Charge

S& F Mild steel 300 mm long ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engr-in-Charge

S& F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks,or galvanised wire staples complete all as specified and directed.

S&F mild steel bands, straps, supports or stays for rainwater, ventilating pipes incl bolts , hooks for large gates, pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fast, and wall tie , hook for hanging fans, plain angle cleats for securing purlins trusses or rafters, knee piece inserts, two way and three way straps, plate washers and all similar small articles conforming to FE-290 Gde and E-165 complete all as specified and directed. by Engr-in-Charge

S& F 2nd class hard wood plain fillets square, rectangular or triangular in section wrought secured with nails or brads of sectional area exc 3 sqcm but n. exc 6 sqcm complete all as specified and directed by Engr-in-Charge

M&L two coats of synthetic enamel painting to new wooden surfaces over a coat of pink primer including preparation of surfaces of any description not otherwise described over 10 cm width or girth complete all as specified and directed.

M&L two coats of synthetic enamel painting to old wooden surfaces including preparation of surfaces of any description not otherwise described over 10 cm width or girth complete all as specified and directed.

Preparation newly steel surfaces exc. 10 cm width or girth and applying two coat of synthetic enemelled paint over a coat of red oxide including all preparation complete all as specified and directed.

Preparation old steel surfaces exc. 10 cm width or girth and applying two coat of synthetic enemelled paint over a coat of red oxide including all preparation complete all as specified and directed.

Taking up or down steel tubing 15 mm bore and connections including cleaning for refixing or removal to stores all as directed

Taking up or down steel tubing 20 mm bore and connections including cleaning for refixing or removal to stores complete all as specified and directed.

M & L steel tubing 15 mm bore medium grade,galvanised with all fitting and fixed complete to walls and ceiling or laid in floor etc complete all as specified and directed by Engr-in-Charge

M & L steel tubing 20 mm bore medium grade,galvanised with all fitting and fixed complete to walls and ceiling o laid in floor etc complete all as specified and directed by Engr-in-Charge

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exc 10 cm girth on stone, concrete block walls orslab walls etc complete all as specified and directed by Engr-in-Charge.

Dismantling water tanks of any description and type (PVC or RCC or bk wall) and removing to stores exc 500 ltrs and n. exc 1000 ltrs capacit incl float valve etc complete all as specified and directed by Engr-in-Charge

S&F storage water tank (Rotational moulded PVC tank) cylindrical vertical type with closed top hoisted & Fixing in position incl float valve and connecting to GI pipe etc complete (500 ltr capacity) including ball brass valvs high pressure with polythene float fixed to 20 mm bore pipe complete all as specified and directed.

S&F in repairs 15 mm bore stop valves fency type, chromium plated reduce body, long shunk, cap (concealtype) screwed down high pressure screwed both ends for iron pipe or for union etc complete all as specified and directed by Engr-in-Charge

S&F 15mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe complete all as specified and directed.

S&F 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe complete all as specified and directed.

S&F in repairs Chromium plated shower rose 125 mm size with or without swivel joints any size including fixing to steel pipe or union etc complete all as specified and directed. by Engr-in-Charge

S&F 15mm dia angle valve cast copper alloy fancy type chromium plated with long shank and cup (concealed type) complete all as specified and as directed.

S&F in repairs 15mm bore bib taps brass chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for chromium plated ferrule and fixed complete all as specified and directed by Engr-in-Charge

S&F in repairs 100 mm dia PVC grating doom etc fitted to gratings complete all as specified and directed.

S& F in repairs PVC connections 15 mm dia with PTMT nuts of length 600 mm complete all as specified and directed.

S &F in repairs soap dish of chromium type fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repair Brass Chromium plated Towel Rail 20 mm dia D type 60 cm long between flanges complete all as specified and directed.

S&F in repairs vitreous China water closet Orissa pattern of size 580x440mm , white, with 'P' ro 'S' trap and integral foot rest, front or back inlet and flush pipe of polytheylene 32mm dia for low level cistern including provision of cement concrete bedding complete all as specified and directed.

M&L for GI steel sheet cover / lid 0.45m dia and 0.20m ht of 0.8mm thick of semi sphere shape hollow fixed to over head service tank of size 500 ltrs to 1000 Ltrs capacity with proper fixing arrangement of hasp and staple and butt hinges fixed with small nuts and bolts complete all as specified and directed

S&F 20 mm dia fancy type coloured CP curtain rod with bracket including all neccessaly fittings fitted on wooden round blocks with screws complete all as specified and directed. complete all as specified and directed.

S&F of PVC low level flushing cistern 10 Ltr capacity, valveless syphonic action type complete with inlet, ball valve, float valve, bends brackets, rawl plug, brass screws handle etc complete having BIS description mark with IS-2731 with and including suitable size of MS brackets, plug, screw all as required incl taking down existing high level/low level flushing cistern any type disconnecting pipes and jointing with new one etc, and making good the floors/walls as per existing floor finish/wall finish including 32 mm bore PVC flush pipe and jointing with water closet of any type complete all as specified and directed.

S&F in repairs vitreous china wash basin white flat back of size 450X300 mm including Pillar tap, waste fitting, chain and plug including suitable size of brackets and making good the damaged walls as per existing wall finish complete all as specified and directed

M & L for chequered cement tiles 20 cm X 20cm X 25 mm thick, or more, set, jointed & pointed in neat cement slurry in floor with grey cement mixed with colour pigments including 20mm thick screed bed or bedding layer of mortar in CM 1:6 and including packing to edges complete all as specified and directed.

M&L for Machine pressed precast colour concrete interlocking paver block with grey cement and pigment of any size and shape confirming to IS-15658-2006 of 60mm thickness M-40 Grade including packing to edges as required complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation etc complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc complete all as specified and directed.

M &L for PCC (1:2:4) type B-0 using 10/12.5 mm graded stone aggregrate laid over roof slab after applying cement slurry for filling undulationations finished even and smooth without using extra cement complete all as specified and directed.

M & L for applying cement slurry over existing roof surface @ 3 Kg/Sqm complete all as specified and directed.

M&L screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:4, over RCC roof slabs for laying water proofing treatment mixed with using water proofing liquid @ 150 ml per bag of cement complete all as specified and directed by Engineer-in-Charge. (Note : Water proofing liquid shall be measured and paid separately)

M & L for cool roof antislip tiles 300x300x10 mm with high SRI (Solar Reflective Index) value not less than 90 laid over existing treatment on accessible roof and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

supply Integral water proofing Liquid complete all as specified and directed.

M&L PCC (1:5:10) type E-2 as sunken sub base of floor fillings with broken brick aggregrate to sunken floors including demolition of PCC any type or broken brick with sunken floor complete all as specified and directed.

S&F 32mm dia GI pipe, medium grade as in spout pipe in sunken floor complete all as specified and directed.

S&F in repairs Stainless Steel plate rack of size 90x80x25cm made with 1.00 mm thick sheet including taking out existing wooden plat rack, complete all as specified and directed.

S & F Sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

M&L for Providing & injecting chemical for post construction ATT along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in a portion with cement mortar 1:2 to match the existing apron complete all as specified and directed.

M & L for Post Construction anti termiteTreatmentAt points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed.

M & L for Post Construction anti termiteTreatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor complete all as specified and directed.

M&L for two coat OBD on newly plastered wall surface over including a coat of primer applied including a coat of 1mm thick wall care putty Finishes shall be applied using airless spray technology and capable of oprating single spray gun with a suitable hose length. The spray machine should be reputed manufacturer with pro-guard technology and capability of tracking pressure as well paint & primer usage complete all as specified and directed by Engr-in-Charge.

M&L for complete removal of existing treatment on wall by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc by skilled labour and applying two coat OBD on wall with Finishes shall be applied using airless spray technology and capable of oprating single spray gun with a suitable hose length. The spray machine should be reputed manufacturer with pro-guard technology and capability of tracking pressure as well paint & primer usage over one coat of plaster of paris of 1mm thickness complete all as specified and directed.

M&L for preparing newly plastered walls surfaces and applying two coats of cement base paint over a coat over a coat of alkali resistant priming paint primer, Finishes shall be applied using airless spray technology and capable of oprating single spray gun with a suitable hose length. The spray machine should be reputed manufacturer with pro-guard technology and capability of tracking pressure as well paint & primer usage complete all as specified and directed.

M&L complete removal of existing treatment and applying two coats of cement base paint over a coat of alkali resistant priming paint primer, Finishes shall be applied using airless spray technology and capable of oprating single spray gun with a suitable hose length. The spray machine should be reputed manufacturer with pro-guard technology and capability of tracking pressure as well paint & primer usage complete all as specified and directed.

M&L for preparing newly plastered surfaces and applying two coats of white wash on ceiling complete all as specified and directed.

M&L for complete removal of existing treatment on ceiling, etc including cleaning of any mortar drops, fungus efflorescent salts etc and preparation of old plastered surfaces and applying two coats of white wash complete all as specified and directed.

Dismantling of cast iron pipes or reinforced concrete drain pipe, jointed in cement mortar and taking out of trenches if required upto 100mm bore including fitting complete all as specified and directed.

S&F of 75 mm PVC (SWR) drain pipe single socketed in any length with rubber ring joints, laid in trenches or in floors or fixed to walls complete all as specified and directed.

S&F of 110 mm PVC (SWR) drain pipe single socketed in any length with rubber ring joints, laid in trenches/floor if required or fixed to walls complete all as specified and directed.

S&F of 110 mm bore PVC (SWR) bend any radius complete all as specified and directed.

S&F of 75 mm bore PVC (SWR) bend any radius complete all as specified and directed.

S&F of 110 mm bore PVC (SWR) Junction single equal or un-equal complete all as specified and directed.

S&F of 75 mm bore PVC (SWR) Junction single equal or un-equal complete all as specified and directed.

S & F Stack clamps out of 75mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof suitable 75mm bore pipe complete all as specified and directed.

All as per item No. 112 above, but suitable for 110mm bore complete all as specified and directed.

S&F PVC (SWR) vent cowls suitable for 75mm bore pipe complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed by Engineer-in-Charge.

M&L for fly ask brick work straiight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed by Engr-in-Charge.

All as per item No. 116 above, here-in before but half brick complete all as specified and directed.

M&L rendering 10mm thick in CM 1:4 in including using WPC @ 2 % by weight of cement in finishing layer on brick or concrete surfaces finished even & smooth complete all as specified and directed by Engr-in-Charge

S & F PTMT alloy toilet cabinet with mirror of overall size 350 x 450mm and fixed to wall complete all as specified and directed.

S & F for aluminium powder coated frame hollow sections members of size 63.50 mm x38mmx 1.48 mm thick,4 mm thick aluminium composite panel LDPE core with PET coating fixed with into the wall for kithen cabinet/ cupboard shelf incl hanging self for clothes with aluminium clip/strips, pvc beadings fixed with adhesive on edging , design as per site requirements basis, complete all neccessary fitting complete all as specified and directed

S&F 18 mm thick imported pine wooden medium density fibreboard fixed with frame incl hold fast ( as in shutter incl knob in each shutter) etc including magnet catcher built in cup board with all necessary fittings complete all as specified and directed

S&F Powder coated aluminium sliding windows and frame with movable shutter ( sliding on minimum two PVC roller of best quality on two tracks Aluminium composite panel shutter fixed with neoprene rubber gasket with aluminium beading, clips, frame made with aluminium section as appended below- (i) Window frame :68.4x38mm X 1.15 mm thick for two tracks. (ii) Top/bottom rail and style / rail of shutter : 15x37.5x1.15 mm thick and over. (iii) Aluminium beading - 0.7mm thick (v) Aluminium fittings such aluminium suitable handle with auto interlock cap with suitable size . (vi) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed.

S&F in repair Brass CP wall mixture for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed

Dismantling of plain or corrugated steel sheeting any gauge, thickness including Nainital or similar pattern as in roof covering etc complete all as specified and directed

S&F Pre-coated galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

M & L for cutting chases of hanging chajjas, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of sunshades, shelves, lintels, Chajja ( up to IInd floor) etc making good, cutting out exc 10cm and not exc 40cm girth in RCC chajjas in brick walls complete all as specified and as directed.

Excavating in trenchs, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5m in depth and getting out soft and loose soil complete all as specified and directed

Returning, filling soft/loose soil in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed

Removing excavated Soil material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Demolition and breaking up drain pipes (salt glazed stoneware, asbestos cement or reinforced concrete set in cement mortar internal dia of pipe 150mm complete all as specified and directed.

M&L for cement concrete type D2 (1:4:8) (using 40 mm graded stone aggregate) in foundations filling and mass concrete complete all as specified and directed

Concrete bed to drain pipe in Cement concrete 1:3:6 type C-2 including packing under, and haunching against the sides ofpipes after they are laid and tested in complete all as specified and directed

M & L PCC 1:2:4 type B1 using 20mm graded stone aggregate as in Coping /benching including necessary form work and finishing all exposed surfaces of concrete complete all as specified and directed.

M & L 150 mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars laid in trenches and joints complete all as specified and directed.

M&L for rendering 10mm thick either fair faces or other thatn fair faces of brick work or on concrete surfaces of (1:4) finished the surface even and smooth wihtout using extra cement complete all as specified and directed.

Taking down copper/aluminum point wiring complete including fixture and fitting such as switches, ceiling roses, pendants, regulators, sockets, light fittings, holders etc and removing the items from site to store for taking credit (credit for above items should be made as per conditions separately ) and making good disturbed surfaces to match with the existing surfaces of walls, floors etc complete all as specified and directed.

Taking down ceiling/exhaust fan and disconnecting,dismantling blades and removing to store for keeping in safe custody for re-use after making minor repairs complete all as specified and directed.

Taking down electric meter and disconnecting, removing to store for keeping in safe custody for re- fixing and making good disturbed surfaces to match with the existing surfaces of wall, floors etc complete all as specified and directed.

Taking down electric storage type water Heater ( Geyser ) and disconnecting, removing to store for keeping in safe custody for re installing after making minor repair and making good disturbed surfaces to match with the existing surfaces of wall, floors etc complete all as specified and directed.

Taking down main switch / MCB DBS including MCBS etc of any size and removing the items from site to store for taking credit (credit for above items should be made as per conditions separately ) or re-use and making good disturbed surfaces to match with the existing surfaces of wall, floors etc complete all as specified and directed.

Taking dowm submain wiring/service cable including earth wire and removing from site to store for taking credit (credit for above items should be made as per conditions separately ) and making good disturbed surfaces to match with the existing surfaces of walls, floors complete all as specified and directed.

M & L for point wiring with 1.5 sqmm cable PVC unsheathed and insulated copper multistranded conductor FRLS 1100 Volts grade cable ( red colour cable to be used for live connection and black colour cable to be used for neutral connection ) controlled by one way switch drown through and including PVC concealed conduit with all accessories including 1.5 sqmm copper multistrand conductor FRLS 1100 Volts grade unsheathed PVC insulated ( green colour ) continuity earth wire connected to common earth dolly and sunk cast pressed steel terminal box made out of MS sheet 1.25 mm thick for mounting of fittings like switch , socket and fan regulator with 3 mm thick hylum laminated sheet cover incl cutting Chases pinning in, for concealed conduit wiring and making goods of disturbed surface not exc 15 cm girth complete all as specified and as directed following for one light point/fan/Exhaust fan/bell point controlled by one way switch complete all as specified and directed.

All as per item No. 142 above but One 3 pin socket oultel 5 Amp on the same board with other switch complete all as specified and directed.

All as per item No. 142 above but One 3 pin socket oultel 5 Amp on independent complete all as specified and directed.

All as per item No. 142 above but for one light point controlled by two, 2-way 5 Amps switch complete all as specified and directed.

All as per item No. 142 above but 2.5 Sqmm PVC insulated sheathed cable and 2.5 Sqmm cable for earth wire for one 5 pin socket outlet 15 Amps complete all as specified and directed.

All as per item No. 142 above but wiring in existing conduit for one light/fan/exhaust fan/bell point controlled by one switch/bell push complete all as specified and directed.

All as per item No. 142 above but wiring in existing conduit for One 3 pin socket outlet 5 Amp independent complete all as specified and directed.

All as per item No. 142 above but wiring in existing conduit for One 3 pin socket outlet 15 Amp independent with 2.5 Sqmm PVC insulated sheathed cable and 2.5Sqmm cable for earth wire complete all as specified and directed.

Fixing only old serviceable switch piano flush type single pole one way 5 Amps after cleaning etc complete all as specified and directed.

S&F switch piano flush type single pole one way 5 Amps complete all as specified and directed.

S&F switch piano flush type single pole two way 5 Amp complete all as specified and directed.

S&F Switch Piano flush type single pole one way 15 Amps complete all as specified and directed.

S&F Bell push flush type 5 Amp complete all as specified and directed.

S&F Socket outlet 2 in 1, 3 pin 5 Amp flush type complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin 5Amp and 15 Amp complete all as specified and directed.

S&F Bell AC 230 Volt single pole Ding Dong complete all as specified and directed.

S&F Lamp Holder, PVC/Polycarbonate type with back plate for batten fitting ,aluminium heat sink powder coated white with PC diffuser & B22 base cap 9watt 240 Volt complete all as specified and directed.

S&F LED Lamp , PVC/Polycarbonate type, aluminium heat sink powder coated white with PC diffuser & B22 base cap 9watt 240 Volt. complete all as specified and directed.

S&F in repairs LED bulk head luminaire 10 watt with Engineering plastic housing and oval shaped with holder, clear prismatic diffuser,heat sink integrated including one no. 9Watt LED lamp complete all as specified and directed.

S & F in repairs LED Wall bracket type CITY-2 fitting 9 Watt including one nos LED lamp complete all as specified and directed.

S&F in repairs ceiling roze, 3 terminals, PVC polycarbonate isolated body complete all as specified and directed.

Fixing only old serviceable LED Tube light fitting 1x20 Watt after minor repair & retrofit poly carbonate glass tube LED 20W, 4' long if required including suitable electric connection with flexible PVC insulated copper conductor(multistranded) cable of 1.0sqmm from ceiling roze to batten complete all as specified and directed.

S&F in repairs Ultra slim LED light fitting 1X20Watt , powder coated decorative end cap complete with retrofit poly carbonate glass tube LED 20W, 4' long including suitable electric connection with flexible PVC insulated copper conductor(multistranded) cable of 1.0sqmm from ceiling roze to batten complete all as specified and directed.

S&F Ultra slim LED Mirror light fitting 1X10Watt , powder coated decorative end cap complete with retrofit poly carbonate glass tube LED 10W, 2' long including suitable electric connection with flexible PVC insulated copper conductor(multistranded) cable of 1.0sqmm from ceiling roze to batten complete all as specified and directed.

S&f LED Bldg security light 25 Watt 230 Volt AC out door type, high pressure die cast aluminium housing & heat resistant complete with driver, lamp bracket with impact , corrosion resistant & thermal management in multiple optics with IP-65/66 protection and including suitable electric connection with flexible 1.0 sqmm PVC insulated copper conductor cable 1100 V grade complete all as specified and as directed by Engr-in-Charge.

Dismantling the ceiling fan examine complete part thoroughly , oiling, greasing all parts and complete overhauling of fan including replacement of spares & accessories and reassembling complete fan and making fully functional and Hanging the repaired ceiling fans after cleaning, painting and writing MES No with existing colour synthetic enamel paint, 2.0 cm high letters including electric connection with suitable electric cable complete all as specified and directed.

Supply only ball bearings suitable for ceiling fan of any sweep ISI marked complete all as specified and directed.

Supply only capacitor 2.5 Mfd, 415 , 50Hz, ISI marked complete all as specified and directed.

Supply only fan hook clamps steel suitable for ceiling fan hanging complete all as specified and directed.

Supply only Rubber Reel in fan hook clamp for ceiling fan hanging complete all as specified and directed.

Supply only fan down rod made of 15 mm bore GI pipe, 45 cm long complete all as specified & directed.

Supply only Canopy PVC suitable for fixing on fan down rod with screws etc complete all as specified and directed.

Supply only Fan blades complete with nuts & washers, complete all as specified and directed.

Supply only nut, bolt,washer and split pins suitable for fixing of fan clamps with down rod& hanging of ceiling fan complete all as specified and directed.

M&L for dismentling the Strator & Rotor of ceiling fan of any sweep,taking out the burnt copper wire, cleaning the Stator & Rotor with CTC, rewinding the fan with existing gauge and same nos of turns with super enameled copper including varnishing, baking, replacement of sleeves etc and reassembling the fan & testing , complete all as specified and directed by Engr-in-Charge complete all as specified and directed.

Dismantiling the Exhaust fan examine complete part thoroughly , oiling, greasing all parts and complete overhauling of Exhaust Fan including replacement of spares & accessories and reassembling complete Exhaust fan and making fully functional and fixing the rpaired Exhaust fans after cleaning, painting and writing MES No with existing colour synthetic enamel paint, 2.0 cm high letters including electric connection with three core 1.0 sqmm PVC electric cable with stranded copper conductor complete all as specified and directed.

Supply only ball bearings suitable for Exhaust fan of 300 sweep complete all as specified and directed.

Supply only capacitor 4.0 Mfd, 415 , 50Hz. complete all as specified and directed.

Supply only metalic Exhaust fan blade with MS frame for 300mm sweep Exhaust fan complete all as specified and directed.

Supply only rubber Pad for Exhaust fan fixing complete all as specified and directed.

Supply only nut, bolt,washer and suitable for fixing of Exhaust fan clamps/arms complete all as specified and directed.

M&L for dismentiling the Stator & Rotor of Exhaust fan of any sweep,taking out the burnt copper wire, cleaning the Stator & Rotor with CTC, rewinding the Exhaust fan with existing gauge and same nos of turns with super enameled copper including varnishing, baking, replacement of sleeves etc and reassembling the fan & testing , complete all as specified and directed by Engr-in-Charge.

Disconnecting/Taking down from position existing defective storage type water heater( Geyser ) 25/50 Ltrs capacity Opening for repairing/replacement of deffective spares including replacement of spares & accessories and reassembling complete Geyser and making fully functional with accessories & packing new glass wool etc and Re-install of geyser after cleaning painting and writing MES No with existing colour synthetic enamel paint, 2.0 cm high letters and fixing of suitable nuts bolts with washers on wall including all necessary electrical connection with three core 1.5 sqmm PVC insulated sheathed of stranded copper conductor electric cable and also water connection with suitable heavy duty PVC connections complete. complete all as specified and directed.

Supply only copper inner tank 25 Ltr capacity heavy quality complete all as specified and directed.

Supply only steel outer body 25Ltr capacity complete all as specified and directed .

Supply only apparatus plate/base heavy duty 18 SWG with rubber gasket suitable for 25 Ltr capacity Geysers complete all as specified and directed.

Supply only Geyser assembly made out of copper for 25 Ltr capacity Geyser as per sample complete all as specified and directed.

Supply only Geyser element upto 2.0KW as per existing such as push type/thread type/dual clip type etc with rubber gasket suitable for Geyser of complete all as specified and directed.

Supply only thermostate switch ( ISI Marked ) suitable for Geyser any capacity, adjustable 0 degree to 80 degree centigrade and acting at 70 degree centigrade complete all as specified and directed.

Supply only indicator lamp square type/round type, red/green colour for Geyser of any capacity complete all as specified and directed.

Repairs on existing inner copper tank by using brazing to make leak proof not exceeding 15 cm in length complete all as specified and directed.

Repairs on existing copper Geyser assembly by using brazing to make leak proof not exceeding 12 cm in length complete all as specified and directed.

Supply only pressure release valve with bent to Geyser complete all as specified and directed.

Supply only safety valve for Geyser complete all as specified and directed.

Supply & Fix in repairs 3 pin 16 A plug top 230 Volts complete all as specified and directed.

Fixing only and connecting electric meter upto 25 Amp complete all as specified and directed.

S & F ceiling fan 1200 mm sweep complete with blades, down rod and accessories 230 Volts, AC and marking the serial MES fan nos etc including electric connection with three core flexible PVC insulated copper conductor multistranded cable 1.0 sqmm complete all as specified and directed.

S & F Exhaust fan PVC body, AC single phase, 250mm sweep with blades, frame and louvers complete and marking the serial MES fan nos etc including suitable hole smooth round on wall with wire mesh cover etc & electric connection with three core flexible PVC insulated copper conductor multistranded cable 1.0 sqmm complete all as specified and directed.

S&F in repairs stepped, (socket/switch type) electronic fan regulator flush type, 180 Watt, 240 Volts on the existing phenolic laminated sheet complete all as specified and directed.

M & L in repairs sub main wiring with 2 run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm alongwith one run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm as earth continuity conductor drawn in & including PVC conduit/ PVC casing & caping all as directed. complete all as specified and directed.

S&F sheet metal enclousers (DBS) when MCBs to be used 8 way double door single pole & neutral with 200 Amps rated bus bar complete all as specified and directed.

S&F sheet metal enclousers (DBS) TPN, 415 Volts when MCBs to be used 4 way double door Three Phase & Neutral with 200 Amps rated bus bar complete all as specified and directed.

S&F MCCB Three phase and neutral 63 A, 415Volt, 16 KA complete all as specified and directed.

S&F MCB single phase and neutral 16 A to 63 A, 240Volt B- curve complete all as specified and directed.

Fixing only old serviceable MCB SP 6A-32A, 240Volt B curve complete all as specified and directed.

S&F MCB SP 6A-32A, 240Volt B curve complete all as specified and directed.

Fixing of GI pipe 40mm dia in suitable length on ceiling /walls including 01 No. 25x4 mm MS Hook ,nuts, bolts washers, Rubber reel for making arrangement of additional ceiling fan hanging & including painting etc complete all as specified and directed. . Note :- GI pipe for this item will be paid separetly under the respective item.

Supply only GI tube light grade ISI marked of 40mm bore for additional Ceiling Fan hanging complete all as specified and directed.

S & F in repairs GI bracket for fixing of building security light fitting made out from GI pipe 32/25mm dia, 1.2 mtr long bend to shape including 02 Nos 25x4 mm MS clamps,nuts, bolts washers fixed on wall & including painting etc complete all as specified and directed.

Supply and fixing 25mm dia medium grade, ISI marked PVC, Non matallic, Rigid conduit along with accessories laid on surface to match with existing treatment complete all as specified and directed.

Taking dowm service connection/UG cable and removing from site to store for taking credit (credit for above items should be made as per conditions separately ) and making good disturbed surfaces to match with the existing surfaces of walls, floors complete all as specified and directed.

Supply & laying sub class B bricks, well burnt , laid wirdth wise along the length of cable laid in trench over sand cushion laid for cable protection, complete all as specified and directed.

Material and labour for river washed and sreened, dry sand for filling in trench below and around the under ground cable for cushioning of cable etc, complete all as specified and directed.

Boring of holes under road or cutting the road/path/pavement/hard standing or any other situation by mannual means for 50mm bore GI pipe for crossing the cable and making good both the ends complete all as specified and directed. Note :- GI pipe shall be measured and paid separately under respective item.

Supply & fix tube 25mm bore light grade GI with all fittings for cable protection for road crossing/ culvert/ path/ on wall/ floor/ pole/ across the road/path/culverts or laid in floor complete all as specified and directed.

Supply, Laying and testing cable XLPE insulated, screened, PVC bedded,GI steel strip or wire armoured, electric power cable ( heavy duty ), 1100Volts with stranded aluminium conductor of size 10Sq mm 2 core complete all as specified and directed.

M & L for earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 metres below normal ground level connected to galvanised earth lead wire 4 mm dia connected to test point by means of nut, bolts and washers made out of galvanised iron or steel all including earthing pit in PCC (1:3:6) type C1,RCC (1:2:4) type B1 precast cover slab with one handle made out of 8 mm dia round bar,20 mm dia (medium grade) protecation pipe and providing layer of charcoal or coke and salt in alternative layers,necessary earth work complete as shown in Electrical plate No 5 as specified or indicated including testng on completion. Note : Tenderers may note that amount of credit Rs 2,06,642.00.00 will be deducted from the total amount arrived, at the time of Acceptance of contract.

Shikhar ji Enterprises