Tender for Work of erection of 66 kV equipment, structures, control wiring, yard Lighting, Control-Room etc at 66 kV Hapa Sub Sation with Mesh earthing and furniture.

SCHEDULE B-1: MAIN ERECTION

Item code Description of work Unit

Erection of equipments of any type / make

with required all spares as per supplier's

manual & FQP, including individual &

interpole wiring for all mentioned voltage

class switchyard (as per respective technical

specifications & relevant special conditions)

suitable for all type of bus configurations.

Scope includes the dragging /loading /

unloading of same from site store to

c) 66/22 KV Breakers without crane is Set of

Erection of CT/PT/CVT on erected structure

including complete dragging/ loading/

unloading of same with crane only from site

store to erection site and fixing of required

clamps, connectors & accessories as per

instructions of Engineer-in-charge.

d) 66 KV CT/PT/CVT (without crane Per

permitted) Phase

Erection of surge arrester with counter on

erected structure including complete

dragging/loading/ unloading of the same

with crane only from site store to erection

3 9902040010 site and fixing of required clamps,

connectors instructions of Engineer-in-

d) 66 KV LA (without crane permitted) 12 415

Erection of Double break isolator (All make)

with earth blade on its erected structure

consisting of 3 base channels with solid core

porcelain insulator including interconnected

piping with operating mechanism and

accessories with final adjustment for

simultaneous mechanical & electrical

operating fro opening & closing. The rates

are inclusive of dragging / loading /

unloading of the same from site store to

erection site as per instruction of Engineer-

a) 66 KV Isolator (without crane) 2 3459

Same as Item No. 4 but without earth blade

a) 66 KV Isolator (without crane) 7 2491

Erection of Solid Core porcelain /comopsite

polymer Bus post insulator on its erected

structure complete, fixing of accessories and

shifting of same including loading/ unloading

from its site store to erection site.

Laying of any size of 11/22KV XLPE cable

including excavation of trench 300 mm wide

& 600 mm deep including laying and filling

up sand of 100mm layer from bottom &

bricks on three side of cable & refilling the

trench with Murram/soil & ramming etc.

Required bricks, sand, power cable

marker/C.I./G.I. plate etc. will have to be

supplied by the contractor. Rates are

inclusive of shifting of cable drum to the site

from S/S site store. Drum should be handled

only by jacking to avoid damage to cables.

Laying of any size of 11/22 KV XLPE cable in

ready made cable trench or in open space.

Rates are inclusive of shifting of cable drum

to the site from S/S site store. Drum should

be handled only by jacking to avoid damage

Erection of S/S & Equipment structure

including punching of nut bolts. Rates are

9 9902040027 inclusive of shifting of same up to erection

site from its s/s Store.

Erection of 66/22KV or 66/11KV, class

Power Transformer with complete mounting

of all the accessories i.e. bushings, radiators,

conservator tank etc. as per OEM approved

drawing including laying of cable between all

accessories mounted on the transformer/

marshalling KIOSK. Filling and filtration of oil

10 with filter machine as per direction of

Engineer-in-charge, manufacturer Engineer

or as per instruction manual of the

equipment. All necessary tools, tackles,

required for transformer erection shall be

provided by the contractor. Filteration of the

oil will be in the scope of the contractor for

the transformer

Stringing of Bus complete in all respect with

fixing of all fitting, insulators sag

compensating plate / spring and all

accessories as per the instruction of

Engineer-in-charge.

c) Single Moose/AL-59/Zebra conductor Per 170 63

Preparing and fixing of required length of

Jumpers in the switchyard on respective Bus

& equipments, tensioning & dressing of

jumpers complete as per instruction of

Engineer-in-charge.

c) Single Moose/AL-59/Zebra/Panther

Installation of Earthing Strips / MS Round

Bar in any kind of soil expects Rocky(HR/SR)

as per earthing philosophy of GETCO

1) Including digging of 600 mm depth and

450 mm Wide Trench.

2) Cutting, bending, laying and fixing of

Earthing grid conductor.

3) 75×10 mm / 50×6 mmGI strips: Fixing of

two bolt at each straight joints and lap

welding, removing oxide films formed during

welding, applying two coats of red oxide and

black powder after welding and applying Zinc

Rich Paint on welded joints.

4)25/32/36/40MM dia MS Rod: Lap welding

at each straight & cross joints, removing

oxide films formed during welding, applying

two coats of red oxide and black powder

after welding and applying Zinc Rich Paint on

5) Including supply of red oxide, black

powder, HDGI nuts & bolts, as per

6)Back filling of the trench with yellow /

Normal soil. Structure and

Equipment earthing:

1) Including digging of 600 mm depth and

450 mm Wide Trench.

2) Cutting, bending as per required shape,

laying and fixing of risers from Grid to

structure and Equioments. 3) Lap

welding, removing oxide films formed during

welding, applying two coats of red oxide and

black powder after welding and applying Zinc

Rich Paint on welded joints including supply

of HDGI nuts & bolts for all connections

including supporting to structures etc as per

4) Back filling of the trench with yellow /

9902040061 (a)75X10 mm GI Strip Mtr 0 52

9902040061 (b)50 X 6 mm GI Strip Mtr 3500 43

Installation of Earthing Strips / MS Round

Bar in Rocky(HR/SR) as per earthing

philosophy of GETCO Earthing Grid.

1) Including digging of 600 mm depth and

450 mm Wide Trench.

2) Cutting, bending, laying and fixing of

Earthing grid conductor.

3) 75×10 mm / 50×6 mmGI strips: Fixing of

two bolt at each straight joints and lap

welding, removing oxide films formed during

welding, applying two coats of red oxide and

black powder after welding and applying Zinc

Rich Paint on welded joints.

4)25/32/36/40MM dia MS Rod: Lap welding

at each straight & cross joints, removing

oxide films formed during welding, applying

two coats of red oxide and black powder

after welding and applying Zinc Rich Paint on

5) Including supply of red oxide, black

14 powder, HDGI nuts & bolts, as per

6)Back filling of the trench with yellow /

Normal soil. Structure and

Equipment earthing:

1) Including digging of 600 mm depth and

450 mm Wide Trench.

2) Cutting, bending as per required shape,

laying and fixing of risers from Grid to

structure and Equioments. 3) Lap

welding, removing oxide films formed during

welding, applying two coats of red oxide and

black powder after welding and applying Zinc

Rich Paint on welded joints including supply

of HDGI nuts & bolts for all connections

including supporting to structures etc as per

4) Back filling of the trench with yellow /

9902040061 (a)75X10 mm GI Strip Mtr 0 174

9902040061 (b)50 X 6 mm GI Strip Mtr 1000 164

Supply ,Installation Testing and

Commissioning of Maintenance free treated

earth electrodes suitable for Normal Soil as

per drawing no GETCO /E/STD/P-021(1 OF 2)

R3 DT 29.0.2020 and technical specification

GETCO/E/TS-maintenance free earth pits/R1

dated 04.06.2015 for 66/11 kv substation with

ground enhancement material/back

fill/grounding compound as per IEEE 80-2000

Clause 14.5(d) and as per part-7 of IEC

using copper bounded earth electrode(with

250 micron copper coating)having 24 mm

(mim) and 3000 mm length which shall be

capable of handling STC of 25 KA-1 sec. Work

also include providing BB masonry inspection

chamber(manhole) incl. light type CI cover

Installation of ground rod 20/32/24 mm dia.,

16 9902040062 3 m long vertical spike for mesh type No 30 158

earthing in Normal Soil

Erection of Control Panel Relay panel or C/R

Panel or RTCC Panel including grouting of

panel, jointing with adjoining panels

including required fabrication for entry of

17 9902080004 control cables and complete vermin

proofing. Job includes supply of required

bolts, nuts etc. and shifting of panel from S/S

site store to work site

Erection of 11 kV CB Panel of any make

including grouting, jointing with adjoining

panel and Horizontal , Vertical levelling

including required fabrication in control

panel or required stone cutting in flooring

for entry of Power Cable, Control Cable

including interpanel wiring and complete

vermin proofing, job includes supply of

required bolts, nuts etc and shifting of panel

from SS Site store to work site.

-- do -- LT panel GETCO including fixing of all

switches bus bars etc.

Erection of Battery Charger of any make as

20 9902080007 per manufacturer's instruction manual No 1 968

including grouting, vermin proofing

Erection of 100/250 AH D.C. Battery Set on

wooden stand as per instruction manual of

21 9902080009 supplier, including first filling of battery

electrolyte, proper connection of cells and

applying, charging/discharging cycles as per

manufacturer's instruction manual and

instruction of EIC

Erection of station transformer of 22KV or

11KV/430V, 63/100KVA on its plinth/DP

Structure ,grouting of foundation bolts, fixing

of channels.., D.O. fuse by fabricating str.& its

painting, danger board etc. including

connection with power cable LV cable

terminations including shifting from S/S site

store to plinth as per Engineer-in-charge.

Fabrication for erection of any Equipment

23 9902990026 /Structure /Panel or anywhere in S/S & F.B. 1 4992

at other end as per Inst. Of E.I.C.

Erection of supporting structure for 11kv

Power cable termination at 11kv bushing of

10/15/20 MVA transformer as per DRG. No.

GETCO/E/06S-STD/11KVSTR-A2-02

1) Material for supporting structure will be

supplied free of cost by GETCO.

2) Necessary wooden clamp with required

nut-bolt-washers & HDPE rubber piece for

packing etc. as per drawing shall be supplied

3) Job also include minor fabrication if

required as per instruction of E.I.C.

Providing & fixing of Set of following Items

on erected 11KV support structure system

for power cable 66/11 KV Transformer as per

DRG. No. GETCO/E/06S-STD/11KVSTR-A2-02

and instruction of E.I.C.

1) Alluminium Alloy Bus Bar of size

75X20X2000 mm. with heat shrinkable anti

tracking tubing: 03 Nos.

2) 11KV SRI of PCD 127 mm - 12 No

3) Copper laminated fusion welded flexible

jumper of size 75 X 10 X 600 mm having

2000 Amp capacity: 03 Nos.

4) BiMetalic Plate (Al/Cu): 03 Nos.

5) 11KV heat shrinkable anti tracking Sleeve

on Al Bus bar of all three phase: 06 mtrs.

6) Including required GI/SS nut-bolt and

washers of Good Quality for fitting support

7) All live parts shall be covered with heat

shrinkable MV insulated tape / sleeve.

Erection of supporting structure for Station

transformer as per GETCO drawing no :

GETCO/E/06S-STD/11KV STR A3-03.

1) Necessary wooden clamp with required

nut-bolt-washers & HDPE rubber piece for

packing etc. as per drawing shall be supplied

26 9902030018 by contractor. No 1 2196

2) Job also include erection of required 11kV

LA and D.O fuse and any minor fabrication if

required as per instruction of E.I.C.

3) Material for supporting structures, D.O.

Fuse and 11kV LA and will be supplied by

GETCO free of cost.

Erection of 11KV D.P. Structure as per

GETCO Drawing No.: GETCO/E/06S-

STD/11KV STR A1-01.

1) Job includes erection of 11KV A/B

switches, 11 KV PI, jumpering between 11kv

cable to 11kv Bus etc. on erected structures.

2) Material for DP structures, A/B switches,

27 9902030018 PI and conductor for jumper will be supplied No 5 2196

by GETCO free of cost.

3) Necessary wooden clamp with required

nut-bolt-washers & HDPE rubber piece for

packing etc. as per drawing shall be supplied

4) Job also include minor fabrication if

required as per instruction of E.I.C.

Erection of 11KV D.P. Structure as per

GETCO Drawing No.: GETCO/E/06S-

STD/11KV STR A4-04.

1) Job includes erection of 11KV A/B

switches, 11 KV PI, jumpering between 11kv

cable to 11kv Bus etc. on erected structures.

2) Material for DP structures, A/B switches,

28 9902030018 PI and conductor for jumper will be supplied No 5 2196

by GETCO free of cost.

3) Necessary wooden clamp with required

nut-bolt-washers & HDPE rubber piece for

packing etc. as per drawing shall be supplied

4) Job also include minor fabrication if

required as per instruction of E.I.C.

Providing of M15 Grade Concrete for various

equipment structure, Guy, 11kv DP, M.K.

Box, Neutral channels, cable support

channel, grouting of Pole/ Flood light

structure with cement, sand & metal in

proportion of 1:2:4 respectively.

1) Work includes muffing with smooth

cement mortar (1:6) finish.

2) Necessary sand, metal, water and cement

shall be supplied by the contractor.

Excavation in Hard Rock for excavation of

30 9901020007 earthing pits/11 KV or LT power cable cmt 100 525

trenches/Yard light poles only

Loading, Transporting & Unloading of all

material for 66 KV substation like Structure,

indoor & out door Equipments, DP

Structures, earthing materials, Battery set,

fire wedge, GI/MS Scrap, all other required

materials, etc in all respect for Substation &

opposite end feeder bay from Store(Any

store either Const. div. or R & M Store within

respective Zone) to Sub Station Site.

This job also includes crediting balance

materials at respective construction division

store at no extra cost.

Supply & laying of 1 Core X 25mm2,

Armroured Copper Cable multi-strand

flexible of approved make ISI marked in ready

made trench or PVC pipe from Battery

Charger to Battery Set including termination

at both side as per inst. of EIC.

Providing and fixing of various type of sign

Board, sticker, Big Sign Board, earthing pit

board, earthing pit Board & Single line

diagram etc as per instruction of IEC. Sticker

of red, white, black Letters are to be utilised

for various sign board.

Earthing Pit Board Size:- 6" x 6" -30 Nos.

Safety Slogan Board, Hard Sheet board size 2'

x 2'and 4mm thick (Gujarati Language)- 2 Nos.

Safety Slogan Board, Hard Sheet board size 3'

x 2'and 4mm thick (Gujarati Language) with

red and Yellow colour.-03 Nos.

Single line diagram size 5' x 3' Digital with

Alluminium frame with fitting and as per

approved diagram given by IEC.-01 No.

Big sign board size 5' x 4' and 2mm thickness

33 9901180046 indicating sub station name digital with S.S. Job 1 24957.00

rod with hole & as per approved symbol with

fitting charge.- 01 No.

Switch yard sign Board 12" X 6" with 2 mm

Thickness black & white Gujarati language.25

Safety Slogan Board size 2" x 6" in side control

Various type of control room equipment

sticker size-24 cms x 5cms.--18 Nos.

Safety picture board size :- 3' x 3' (Laminated

for O/D use)-03 Nos.

Name plate board of transformer size :- 2' x

Cable marker size:- 6" x 6", Radium, fixed on

750mm long M.S.Rod for fixing arrengement.-

P & F radium stiker for outdoor & indoor

equipment identification like LA ,Isolater,

Circuit breaker ,Transformer, CT, PT, MK Box

C&R panel ,11 kv Panel etc..

Providing and Fixing of fire stand from

75mm Gl pipe A Class ISI mark heavy duty

having 5ft width and 4ft height as per inst of

Engr. In charge

1) Work includes cutting,drilling, welding of

pipe as required. Fabrication and supply of

16mm dia meter hook size required for

2) 4 Nos.of fire buckets are to be provided

by the contractor. 3) Fire stand

should grouted with excavation of pit size

300mm x 300mm-2 Nos. of 600mm depth

with 1:3:6 mix muffing 300mm in height

including leveling of stand.

4) The fire stand is to be painted with post

box red colour of approval quality as per

instruction of EIC.

5) All required approved material including

cement, sand, metal etc are to be provided

Labour charge for fixing of 11KV XLPE Indoor

/ outdoor cable kit of any make for 11KV,

3C× 95 to 300 sq. mm. XLPE power cable.

Cable kit provided by GETCO.

Providing & Fixing of

RAYCEM/MSEAL/CABSEAL or equivalent

GETCo approved make heat shrinkable type

11KV XLPE indoor/Outdoor cable

Termination kit suitable for 11KV, 3C x

sqmm to 300 sq.mm XLPE power cable.

Providing & Fixing of Total Revival Type

Water R.O. Plant including Commissioning &

Testing and also with required peripherals

for installation of plant as per site condition

38 (2) Weight : 8 KG No 1 6889

(3) Water flow : 8 to 12 LPH

(4) Input power : 230V AC

(5) RO membrence : TFC spiral

You have to provide guarantee for the

months from installation

Providing and fixing of ISI marked Insulating

Mattysheet Suitable for 11KV Class As per

following specification.

Reference IS:15652-2006 with latest

amendment. Suitable

for Voltage Class :B

Max Use Voltage : 11KV

AC proof voltage : 22KV

Dielectric strength : 45KV

Leakage current : < 10 micro ampere

39 9902040903 Colur RED/BLUE sq.mtr 17 4492

Make : Vardhman or equivalent (

Rubberhouse India) Width

Thickness :2.5 mm.

Surface :Chequred on one side and other

side plain. NOTE:

Contractor has to supply Rubber Matty sheet

as per IS:15652-2006 with latest amendment

specification and shall submit test certificate

for routine test as per relevant IS

Providing & fixing of reputed make ISI mark

Fire Extinguisher with latest amendment in

standards as per following capacity . Note:

Contractor shall submit Test certificate for

40 routine test as per relevant IS.

9902040911 a) Chemical Powder 9 Kg No 2 6301

9902040916 d) Mechanical Foam Type : 50 Ltr No 1 14499

TOTAL: SCHEDULE B - 1

SCHEDULE B-2 : CONTROL WIRING

Description of work/Supply Unit Rate Amount

Preparing of complete schedule of wiring for

line/ transformer bays in triplicate.

necessary drawing will be provided by the

GETCO. Schedule should be approved by EE

or DE in charge.

a) 66 KV Bay 4 1996

Laying of 1.1KV PVC, armored copper/

aluminum control cable inside hume

pipe/cable trench including binding /

clamping of cable with GI wire or saddles as

per the requirement including the supply

and fixing of identification tags at both ends

and at distance of every 10 mtr of following

size.(Cable will be supplied by GETCO at free

mm2, 7C × 2.5 mm2, 4C × 4 mm2 Copper

control cable or any equivalent size of all LT

9902080038 Copper control cable 3.5 C or 4 C × 10 mm2, Mtr 2500 10

70 mm2 alluminium armoured or

unarmoured LT power cable.

Laying of 1.1KV PVC, armored copper/

aluminum cable in ground by digging trench

of suitable width and 450 mm depth in any

type of soil includingsupply and fixing of

identification tags at both ends and at

distance of every 10 mtr of following size.

43 mm2, 7C × 2.5 mm2, 4C × 4 mm2 Copper

control cable or any equivalent size of all LT

9902080025 Copper control cable 3.5 C or 4 C × 10 mm2, Mtr 150 26

70 mm2 alluminium armoured or

unarmoured LT power cable.

Providing and fixing 'B' class G.I. pipes of

following size for cable protection including

fixing with the structures.( Non SOR)

including required 'L' & 'T' band, coupling for

44 CT,PT, Transformer, M.K.Box cabling on

structure including required fabrication.

9902040142 {a} 40mm dia (weight of pipe-3.2kg/meter) Mtr 150 255

9902040142 {b} 50mm dia (weight of pipe-5.1kg/meter) Mtr 80 284

Termination of Control Cable at Panel / M.K./

Equipments including supply of required size

of double compression type metal glands,

45 lugs, ferrules, PVC Binding Tape, Buttons,

Cable ties etc for following size of cables.

9902990012 a) Up to 7 Core Control cables End 150 199

9902990011 b) As above but Above 7 Core Control Cable., End 100 349

Providing & Installation and Commissioning

of Remote Control switch Board for ON/OFF

control of all 11kv Panel from operator's table

with supply of good quality metal sheet box (

18 SWG )size 450 x 450 x 125 mm with door,

20 nos standard ISI make and rating industrial

push botton,indication lamp(LED)with

46 9902040065 installing accept/reset arrangement with Job 1 6489

required ISI marked copper flexible wire size

2.5 Sq. mm including complete wiring in PVC

pipe and fixing on wall or on floor as per inst.

of EIC.only 19/27 core x 2.5 sqmm cable

supply by GETCO.Job includes Supply of

required nos. of Disconnecting Type Terminal

for wiring at 11 kV Panel Board end

Providing and fixing of all weather proof, cold

rolled sheet steel Junction Box for CVT & PT,

CT terminations with 30 Nos. of disconnecting

47 9902990013 type, 'Elmex' make CATDM 4 or equivalent No 6 21549

type connectors and required no of fuses,

links etc.as per instruction of Engineer-in-

charge and as per drawing enclosed here with

TOTAL - 2 ( SCHEDULE B - 2 )

SCHEDULE B-3 : YARD LIGHTING

Description of work/Supply Unit Rate

Providing & fixing of all weather proof, cold

rolled sheet steel AC Panel - 2 for Yard-

Lighting, AC supply having

(1)63 A ,4P MCB : 01 NO

(2) MCX-12A Contactor : 01 NO

(3) Digital timer : 01 NO

(4) 20 A,TPN MCB : 06 NOs

(5) Indication Lamps, 03 NOS ( R , Y , B )

(6) Push Buttons : 02 Each ( Red & Green)

(7)Terminal Connectors as per site

requirement and

other detail as per drawing enclosed

including grouting & necessary fabrication of

GI Angle or fixing on GI Structure including

earthing with main grid as per instruction of

Providing & fixing of all weather proof, cold

rolled sheet floor mounted fixed type sinle

door grey color main AC Dist Box having size

900X600X250 MM with door closing

arrangement rubber gasket.

Contractor has to supply following materials

with box along with necessary mounting and

(1) L&T/Anchor/Havells Make 100A, 4P

MCCB - 1 Nos. (2)

L&T/Anchor/Havells Make 63A, 4P MCCB -

Nos. (3)100A Copper

Bus-bar link length 6 inch & 25X3mm - 4 nos.

(4) Tinned Earth Bus 25 X 3 MM length -32

Inch-1No. (5) 25 &

sqmm Cu. Flexible cable 4 & 8 mter

respectively. (6) Required nos. of

Cu. Lugs etc. as per instruction of EIC.

Supplying & laying of following size

Control/L.T power cable in readymade cable

trench or by excavating in any type of soil

cable trench size 300 mm wide 600 mm depth

and refilling the same as per the direction of

EIC. Item Includes the cable laying upto

termination box with clamps & proper

clamping of cable on gantries by GI pipe &

50 9902990006 glands as per direction. Item includes Mtr 120 292

providing & supply of bircks, sand as per

requirement. The L.T power cable to be

provided by contractor as under: ISI

(Part-I). 3.5 core × 50 mm2 Alluminium cable-

Armoured from distribution X'mer to Main

Distribution Board near dist. X'mer and from

MDB to indoor LT panel board (LTPB) - both

Supplying & laying of following size of

Control/L.T power cable of FINOLEX or

equivalent ISI mark in readymade cable

trench or by excavating in any type of soil

cable trench size 300mm wide and 600mm

depth and refilling the same as per the

direction of EIC. Item Includes the cable laying

up to termination box with clamps & proper

clamping of cable on gantries by GI pipe &

glands as per direction. Item includes

providing & fixing of bricks, sand as per

requirement to protect cables. The L.T power

cable to be provided by contractor as under

:As per ISI 1554 (Part-I). 4 Core x 25 mm2

Aluminum Cable-Armored from LT panel

board (LTPB) to Yard Light AC MK (AC Panel-

2)., AC Panel 1 in C.R. and yard AC Box

-- do -- 4C x 4mm2 Copper cable - Armoured,

from yard-light AC panel-2 to all yard-light

fixture junction boxes on LM & street light

pole & Station transformer to Colony & LT

52 9902080024 panel to watchman cabin. Mtr 600 19

Note: Cable laying work either in ready made

cable trench or by excavating in any type of

soil if required.(Only laying. Cable will be

supplied by GETCO)

-- do -- 4C x 2.5mm2 Copper cable -

Armoured, from yard-light AC panel-2 to all

junction boxes on post top lantern.

53 9902080024 Note: Cable laying work either in ready made Mtr 125 19

cable trench or by excavating in any type of

soil if required.(Only laying. Cable will be

supplied by GETCO)

Providing & fixing of 'B' class ISI marked GI.

Pipe of 32/40mm dia for cable looping & road

crossing with necessary elbow/band for each

54 9902990021 pole & J.Box for yard lighting & for Mtr 60 180

controlroom flud lights wiring work with

fixing on wall with shadles if required as per

Providing & erection of 7.0 Mtr. long swaged

type welded GI tubular street light poleon

the foundation in any type of soil as per inst.

Of E.I.C. confrirming to relevant IS and as per

attached Drawing No. GETCO/E/STD/LTG.

POLE-R2 Dt. 24-12-2019

Providing & erection of 4.5 Mtr. long swaged

type welded GI tubular street light poleon

the foundation in any type of soil as per inst.

Of E.I.C. confrirming to relevant IS and as per

attached Drawing No. GETCO/E/STD/LTG.

POLE-R2 Dt. 24-12-2019

Supply and fixing of Pole/Wall/Structure

mounted FRP junction box standard make of

required size with clamp, providing 1 SPN

MCB G class of 16 A having short ckt

breaking capacity of 10KA peak of standard

57 9902990013 ISI make like L&T/ANCHOR/MDS /HAVELLS & No 28 748

2 Nos. of stud type connector of standard

make like Connectwell. The cable glands &

lugs are ncluded for both incoming & out

going cables. MCBs shall be of standard

make like MDS/HAVELLS

Earthing to tubular pole/luminaries,by coil

type earthing of 10 SWG GI wire in earth pit

of 1.5 mtr. Depth in any type of solil by using

salt/ coke (charcole) 16 kgs each & remaining

filling with BC soil & clamping the earth wire

with pole & Junction box.

Providing and fixing of Single Piece Cast

Alluminium full frame with Acrylic Cover

integrated Energy Efficient flood light

luminaries on swaged pole / GI structure by

providing required fabrications, of

Philips/CGL/Bajaj/GE/Osram make, suitable

for 1 x 250 Watt HPSV/T with allied

accessories such as Capacitor Ignitor, Ballast,

Control Gear Box etc, 4 core 2.5 sq mm

double insulated flexible stranded wire

should be used from control gear fitting to

Providing & fixing of LED Street LightFixtures

(1x120w) (CGL Cat No. LSTO-120/CDL 120w or

Equivalant under cat- II or above as per R & B

60 9902040093 SOR) 4-core 2.5mm2 double insulated flexible No 8 9593

stranded wire should be used from control

gear fitting to approved SMC type junction

box as per inst. of EIC.

Providing & fixing of 1X 40 W LED Post Top

Lantern Fixtures (CGL Cat No. LSTO-40/CDL

40w or Equivalant under cat- II or above as

per R & B SOR) complete fitting in all respect

61 9902040070 and 4 core x 2.5 mm2 double PVC flexible No 7 7556

copper cable from control gear fitting to

SMC junction box as per instruction of EIC. (

4 No are to be provided on Main gate & 3 No

are to be provided on 4.5 Mtr Tubular pole

TOTAL - 3 ( SCHEDULE B - 3 )

SCHEDULE B-4 : CONTROL ROOM INDUSTRIAL ELECTRIFICATION

Description of work/Supply Unit Rate Amount

Providing and fixing of DBS as AC Panel -

for CR of ISI marked Powder coated Pearl

DBS of ivory color , wall mounting, Double

door Distribution board of L&T, Heggar or

higher make fitted with 63Amp Phase Bus

bar, Earth / Neutral Bars and inter

connecting wires with removable bottom

gland plates for all power cable entry from

bottom with DIN Channel ,incoming contact

and 1No - 63Amp TPN MCB 'C' Series ,6Nos-

20A SP MCB 'C' Series and 13No -10A SP

MCB 'C' Series All MCBs are L&T, Anchor or

Higher make only. Complete in all respect

and as per instruction of EIC.

Supplying & laying of following size of

Control/L.T power cable of FINOLEX or

equivalent ISI mark in readymade cable

trench or by excavating in any type of soil

cable trench size 300mm wide and 600mm

depth and refilling the same as per the

direction of EIC. Item Includes the cable

laying up to termination box with clamps &

proper clamping of cable on gantries by GI

pipe & glands as per direction. Item includes

providing & fixing of bricks, sand as per

requirement to protect cables. The L.T

power cable to be provided by contractor as

under :As per ISI 1554 (Part-I). 4 Core x

mm2 Aluminum Cable-Armored . From LTPB

to AC Panel 1 in C.R.

Supplying & Laying Sub-main lines of 3X2.5

mm2 ( two for P & N and one for

Earthing)copper PVC insulated wier of ISI

brand in suitable standard make steel

64 9902080098 conduit pipe having minimum 1.5 mm Rmtr 250 125

thickness of approved brand with ISI brand

with clmpes with it's associated accessories

for various circuits amanating from AC panel

1.as per inst. of E.I.C.

Point wiring for control room tube lights,

fans, exhaust fans, fency lights, water tight

bulck head lights with PVC insulated 660 V

grade standard copper wire in ISI make GI

conduct pipe 20 mm dia and 1.6 mm wall

thickness size fitted with sadles on the

wall/ceiling. Size of wire shall be with 3C x

1.5 sq.mm PVC insulated copper wire for

phase and neutral and earth wire [ Green]

and 5 Amp Anchor/Roma or any equivalent

65 9902980004 switch as per specification with 16 guage Point 60 1298

M.S. box. The box shall be covered with

mm thick decorative mat finish hylum sheet.

The work is all inclusive of supply and fixing

of required materials as afore said [ like

M.S.conduct pipe , sadles , swithces , M.S.

box , ceiling Rose , flexible copper wire etc]

to complete point wiring with each fixture to

be earthed by SWG-12 stranded copper

conductor having green color as per

direction and instructions of E.I.C.

Providing, fixing & termination for

emergency D.C. supply arrangement. This

job includes supply & laying of 2C x 2.5 mm2

Copper arrmoured cable from battery

charges to SBDC, fixing & providing SBDC &

complete wiring with supply of wire & D.C.

lamp (110V D.C., 100 watt-4 Nos.) in

standard steel conduit pipe.

Providing and Fixing point wiring in GI.

Conduit pipe size 20 mm dia and 1.6 mm

wall thickness with single PVC insulated

Sqmm. copper wire of ISI standard good

quality using 1.5mm thick suitable size ISI

mark Anchor brand 15 Amp. 250 Volt plug

67 9902980004 socket as separate plug point with shock Point 8 1213

proof accessories incl. indication lamp ;

erected on separate decorative mat finish

hylum sheet board on wall with providing

adequate green earthing wire as per

specification and instruction of Engineer

---- Do ---- as above but with singal PVC

insulated 3Cx1.5 sq. mm.copper wire of ISI

68 9902980003 mark plug socket for 5A domestic use Point 8 814

separate plug points per direction and

instruction of E.I.C.

---- Do ---- as above but looped on same

board i.e. no separate board, plug socket for

5A domestic use as per direction and

instruction of E.I.C.

Providing & Fixing of Ceiling Fan of 1400mm

BLDC type Bajaj/ Crompton / Orient/ usha /

Cinni make (ISI approved) flexible wiring by

using twin core double PVC 48/0.2 mm

copper flexible cord of suitable & approved

make and size from ceiling rose upto fan

terminal & supply and fixing of energy saver

regulators , extra GI pipe of required size and

length for lowering of fan if required as per

instruction of EIC.

Providing and fixing of 50W LED lighting

fixure( CGL Cat no LCTLR- 50-FO-CDL 50W of

Eqivivalant under cat - II or above as per R &

B SOR), 4-core 2.5mm2 double insulated

flexible stranded wire should be used from

control gear fitting to approved SMC type

junction box as per inst. of EIC. as per

instruction of EIC.

Providing and fixing of 41.5w LED lighting

fixtures (CGL Cat no LPFC-36-CDL- 41.5 W or

equivalent under cat- II or above as per R &

B SOR) as per instruction of EIC.

Providing and fixing of 40W (1X4) LED

lighting fixtures as per drawing (in office

73 9902980024 area) (CGL cat no LCTL-40-CDL- (1X4) 40W or No 2 3417

equivalent under cat- II or above as per R &

B SOR as per instruction of EIC.

Providing and fixing of 40W (1X4) LED

lighting fixtures as per drawing (in porch

74 9902980024 area) (CGL cat no LCTL-40-CDL- (1X4) 40W or No 2 3417

equivalent under cat- II or above as per R &

B SOR as per instruction of EIC.

Providing & fixing of industrial 30W LED

street light bulkhead (CGL Cat No LSTO -

30CDL-30W or Equivalent under Cat - II or

above as per R & B SOR) on outside C/R

building and inside cable trench in C/R

including wiring from ceiling rose to fixture

with suitable size of PVC insulated ISI marked

copper wire only as per Instruction of EIC.

Providing and fixing of heavy duty exhaust

fan in battery room size 18" of Make

GEC/KHAITAN/ CROMPTON/ BAJAJ incl. M.S.

lourex shutter of Fan & necessary wall

76 9902980012 finishing works and applying bird proof net No 1 3494

on outside wall with required arrangement

for rain water sealing and necessary

connection from ceiling rose as per direction

and instruction of EIC.

Providing earthing to Qurter with 10 SWG

copper earth wire connecting to required

installations. This work include preparation

of earth pit of size 0.5M x 1.5M depth and

back filling by using Solt, Charcoal 16 Kg.

Each. 2Mtr. Long heavy duty 19mm PVC

pipe and yellow/normal soil with C.I.

earthing plate of 10 Kg weight. as per inst. of

EIC. Required all material to be supplied by

Providing & Fixing of Electric bell with bell

78 9902980029 switch near officer's table. All materials must No 1 149

be ISI mark and approved by Engineer I/C

Providing and fixing of18W LED Lighting

fixture(CGL Cat No LCTL - CDL 18W or

79 9903190044 Equivalent under Cat - II or above as per R & No 3 1281

B SOR) of any standard ISI make and as per

instruction of EIC

TOTAL - 4 ( SCHEDULE B - 4 )

SCHEDULE -B 5-A : QUARTER RESIDENTIAL FURNITURE

Description of work/Supply Unit Rate Amount

P & F Steel table of size 54"X30"X30", one side

92 9900000003 three drawars, one side shelf 1 X 18 gauge No 1 8750

square pipe with Nova pan pre lamination top

P & F Steel rack of size 30" X 36" X 15" with

three partition, prepared with 20 gauges

P & F Steel chair 'S' type, Over hanging arm

94 9900000003 with cushion with cane seat/back 1" X 16" No 2 4600

gauge round pipe frame.

P & F Computer table made from pre

lamination Board size with Key Board facility

95 9900000003 and drawer with continues printer out facility No 1 7200

and mouse tray and also with special tray CPU

and UPS having I.D. 4 X 21 inch C 2.5 F.T.

P & F Steel revolving chair, revolving & titing,

low back high type seat with foam rubber 3"

in seat 2" in back with good quality raxine

cover, five legs, Chromium plated frame

P & F Steel cup board of size 78"X36"X19"

four partition, door and shelves 20 gauge,

body 22 gauge, color olive green as per

drawing attched

Total of Schedule (1 to 5) Rs

NET TOTAL Amount

NET TOTAL Amount

I we am / are willing to carry out the above work at_______________________________________ % above / below (percentage)

should be written in figures and words. ___________________________________________________________Percentage above /

below the tender amount work out Rs. ______________________________________________Rupees in

Signature of Contractor,