Shifting of HT/LT overhead line from Kargi Chawk to Mathorowala T-Point due to road widening on semi turnkey basis

MATERIAL

LT PRMC (400/5)

LT PRMC (200/5)

11 KV Disc Insulator Polymer type

11 kv G/O Switch

11 KV Pin insulator with pin Polymer type

33 KV Disc Insulator Polymer Type

33 KV Disc fitting B&S type 90 kn panther

33 KV Pin insulator with pin (polymer)

9 KV 10 KA L/A

Disc fitting for Dog / Racoon -70KN

Earthing rod 20x2500mm

Earthwire 7/16 SWG ( 1000 m @ 110 Kg./Km. + 3% C&W)

GI wire 6 SWG

GI wire no. 8 SWG

Stay set 16x1800 mm

Stay wire 7/8 swg

Stay set 20x1800 mm

Al. Crimping lugs 240 sq.mm

Al. Crimping lugs 120 sq.mm

Al. Crimping lugs 400 sq.mm

11 KV Cable Termination kit 240 sq mm O/D type

200 mm Dia GI Pipe

Barbed Wire

Bracing clamp (made of MS flat 65x6 mm) with nut & bolt

Cable 1x16 SQ MM

Danger Board with clamps, nut & bolt

Dead End Clamp WNB

Distribution Box 3 phase With Holding Clamp WNB & fixing

E clamp ( made of MS Angle 65x6 mm.) with nut & bolt

E clamp for 33 KV pin insulator

Earth wire clamp (made of MS flat 50x6 mm) with nut & bolt

Earth wire clamp (made of MS flat 65x6 mm) with nut & bolt

F clamp (made of MS flat 65x6 mm) for 11 KV pin insulator

GI Earthing Strip 50X6 mm

GI Nut & Bolts 3/4 " x25 mm

Half cut hume pipe for Cable Laying 6''

LT Clamp (made of MS flat 50x6 mm) for SP-23 with nut and bolt

LT Shakle insulator (100x115 mm) with nut and bolt

PG Clamp for panther to panther Conductor

PG clamps for dog Conductor

Pierecing Concetor 120/95

Pierecing Concetor 95/25

Pipe holding clamp ( Made of 65x6 mm flat) for supporting 6" GI Pipe

PP & clamp (made of MS flat 50x6 mm) with nut & bolt for ST POLE SP-72

PP & clamp (made of MS flat 50x6 mm) with nut & bolt for ST POLE SP-55

PP & clamp (made of MS flat 65x6 mm) with nut & bolt for ST SP-23

Route marking pillar of concrete engraved with nomenclature "UPCL HT Cable"

Stay clamp( made of MS flat 65x6) with nut & bolt SP-55

Stay insulator for 33 KV/11 KV with all fitting

Suspension Clamp WNb

Stud Clamp for SP- 55, SP-72 through SP-23

LABOUR CHARGES

Cartage of ST pole and PCC Poles from store centre to construction site with loading, unloading at both points

Other stock material

Head Load Cartage

Other stock material

Excavation of earth for pole pit of size 0.9x0.6x1/6 of full length of pole for erection of pole

Erection of following Single support pole in proper level and alignment alongwith fixing of all accessories, like top channel & clamps as per RESSPO construction Manual.

Erection of following Double support pole in proper level and alignment alongwith fixing of all accessories

ST Pole SP-55

Erection of following Four pole support in proper level and alignment alongwith fixing of all accessories.

Grouting of pole in size 0.45x0.45x1/9 of the support in CC ratio 1:4:8 (1 cement : 4 graded stone 20mm nominal

Muffing of poles size 0.45 cm x 0.60 cm radious with cc 1:3:6 (1 cement : 3 coarse sand

Fabrication of M.S. Channel Angle iron after cutting in required sizes with drilling of holes upto good finish for top channel, bracing and special type bracket etc. as per RESSPO sehedule and local approved drawing.

Fixing of D-type bracket in LT line

Fixing of Extension bracket in 11 KV line

Fixing of Extension bracket in 33 KV line

Excavation of earth for Stay pit of size 0.6x0.6x1.2mtr in all type of soil including proper dressing

Fixing , tightening and nozzaling of Stay with pole and stay rod

11 KV line

33 KV line

Grouting of Stay in size 0.6x0.6x0.3 in CC ratio 1:4:8

Earthing of support with M.S. Earth rod of 2.5 meter long by hammaring of M.S. Rod 48 pole earthing + 38 L/A & Boby Earthing Of TF

Laying, Spreading, Stringing and sagging following conductor (3 ph 4 wire including earthwire as the extra wire)

Dog CONDUCTOR

ACSR Panther CONDUCTOR

Guarding of Line over (Telephone / Road / L.T. line crossing as per drawing with 6/8 SWG G.I. wire including fixing of guarding channel/ angle as per RESSPO manual. L.T./11KV /33KV

LT/11KV Line.

33KV Line.

Mounting & Fixing of TPMO on double pole structures including making of connections complete work

Mounting & Fixing of Fuse sets on double pole structures including making of connections complete work

Mounting and Fixing of Lightning arrestor set (3 Nos.) on double pole

Painting of poles with angle and channel and all steel part

ST Pole SP-23

ST Pole SP-55

ST Pole SP-72

Dismantling of TPMO /fuse set on double pole structure.

Dismantling of existing LT/HT line. including disc fitting, Insulator, clamps, Nut & Bolts Single Pole

Dismantling of existing LT/HT line. including disc fitting, Insulator, clamps, Nut & Bolts Double Pole

Dismantling of existing LT/HT line. including disc fitting, Insulator, clamps, Nut & Bolts Four Pole

Dismantling of 11 KV Line WITH DOG CONDUCTOR

Dismantling of 33 KV Line WITH Panther CONDUCTOR

Dismantling of Transformers from double pole /plinth including opening of all connections, circuts & earthing strip etc.

Installation / mounting of new Tranformer on plinth pole structure On Double Pole

Providing and fixing of Danger Board and number plate

Dismentling of AB cable

laying of AB cable

Relaying of above dismentteled AB cable

Laying of 1x16+25 sq mm cable for street light

DISMENTLING OF L.T. PVC CABLE 1X120CMM2

DISMENTLING OF L.T. PVC CABLE 1X240CMM2

Dismantelling and remounting of metring cubical after completion of erection work

Dismentling and Remounting of sectionlizer

Back carriage of following

CODUCTOR SCRAP

Merialble Scrap

Channel/Angle/Conductor Scrap

Laying and erection of L.T. PVC single lead Cable including crimping of lugs of size 1x120/240

Making of section pole for existing LT/HT/33KV line complete in all respect.

Complete work of Laying, Stringing and sagging of earthwire

Making of Special type of GI Plate eathing with Transformer/Panel with lap welding including bending or other required work etc. GI strip shall be laid down upto the neutral & T/F body seperately in one piece. Test result of earthing shall be provide by contarctor. Acceptable results shall be within 3 ohm.

Erection providing and fixing of wire mesh of size 50x35 mm around the double pole with frame of ms angle , aluminium paint two coat inculding cost of all material complete work

Laying of 11 KV Cable on ST pole by fixing of GI pipe using cable support channel, clamps etc.

Route Marking of underground HT cable by grouting of concrete piller engraved with nomenclature "UPCL HT Cable" at every 100 mtr

Filling of cable jointing kit 11KV outdoor type

Making connection of Cable Termination End with Line

Making of T/F Base

Fixing of Distribution Box

Dismentaling of connection of Street Light

Disconnection & Reconnetion of Service cable

RP INFRAPOWER PVT LTD

Sagar Engineering Company