e-tender for the Installation of Furnishing Work at Kozhikode.

e tender for the Installation of Furnishing Work at Kozhikode. For more details refer tender documents

Accoustic Paneling Supply and Fixing Accoustic Panelling Withfully Perforated Gypsum Plaster Board Of Size 600 x 600 x 12.5 mm Having Approx. 15% Perforated Area with Performation Size And Pattern As Per manufactures Spec. with All 4 Side Tapered and Backed By Accoustic Tissue with NRC Value Not Less 0.60. Providing and Fixing Sound absorption panel with Resin Bonded Fibre glass wool conforming to IS : 8183, density 24kg / m3, 50mm thick, wrapped in 200 G Virgin Polythene bags,fixed to ceiling /paneling with metallic cleats @ 60 cm and wire mesh of 12.5 mm x 24 gauge wire mesh, for top most ceiling /paneling including all materials and labour charges etc (Sqm)

Dias Table Providing and fixing in place table of size 2400 mm x 600 mm x 750 mm made of a combination of BWR grade 9 mm, 12 mm and 16 mm plywood of approved quality and make; All exposed EXTERIOR portions of the plywood will be finished with 1mm thick Laminate of approved make and shade. The inside portion of the table will be finished with 0.8mm laminate. The rate will include all other necessary hardware. (Nos)

Podium Made with Marine Plywood- 120 x 60 x 40 cm (Nos)

Window Curtain Blind Providing and fixing all window in position Roller Blinds, including all standard fitments and fabric. Rate quoted shall include all material, labour charges, cost of conveyance etc.

Dias Platform Providing and Fixing Dias Made of Combination of 35 x 25 mm , Ms Frame Work and BWR Grade 12 mm Plywood , of Approved Quality and Making. All Expossed Exterior Portion of Plywood Will Be Furnished. the Rate Will Include All Necessary Hardwres and Adhesive Etc..

Name Board Acrylic Name Board- (Nos)

Wall Panneling Providing and Fixing Decorative Wall Panelling With 9 mm Plywood and 16 mm Lamintted Frame and 1 mm Laminatted Sheet for Panel/luvers

Supply of voltas or equilant make Air-cooled Concealed Split air conditioner with nominal capacity 2 TR Fitted with Rotary compressor and Microcontroller panel full copper model

Installation, testing and commissioning of the entire system ( indoor and out door unit, stabilizer, etc..) after necessary leaktest, Vaccumazing and charging

Stabilizer

Copper refrigerant piping interconnecting the condensing unit to evaporating unit

Drain water piping, 32 mm PVC with Rubber Sleeve insulation.

Supply of out door unit stand

Sound System Chairman unit, Speaker, Amplifier, Mic including all accessaries.wire

Electrical Work

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall/ceiling surface:Water thinnable cement primer

Wall/ceiling painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work

Providing and fixing all window in position Roller Blinds, including all standard fitments and fabric. Rate quoted shall include all material, labour charges, cost of conveyance etc

Dias back wall and other wall designing wall paneling with 16 mm thick marine ply wood frame work covered with6, 9,12 mm thick marine ply wood with mica lamination/ luwers with approved color and design

Name Board Acrylic Letters

Providing and fixing Dais made of a combination of 35mmx25mm M/S frame work and BWR grade , 12 , mm plywood of approved quality and make; All exposed EXTERIOR portions of the plywood .The rate will include all other necessary hardware and Adhesive etc.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with: 12.5 mm thick tapered edge gypsum moisture resistant board

Electrical Woks for 10 ceiling lights, strip light with drivers point,10 fan points, 6 AC points. The rate including cables, conduit,modular swiches,box, face plate and cover, 16 watt sockets and swiches for Ac 6 nos,6 watt three pin socket, cabling and swich for each seat (24 nos) at table from the 16 portDB

Networking

Supply of voltas or equilant make Air-cooled Concealed Split air conditioner with nominal capacity 1.5TR Fitted with Rotary compressor and Microcontroller panel full copper model

Installation, testing and commissioning of the entire system ( indoor and out door unit, stabilizer, etc..) after necessary leaktest, Vaccumazing and charging

Copper refrigerant piping interconnecting the condensing unit to evaporating unit

Drain water piping, 32mm PVC with Rubber Sleeve insulation.

Supply of out door unit stand

Supply and fixing 600mmx600mmLED panel lights, wherever necessory including all materials and labour charges etc

LED Strip Light : Installation, Testing and Commissioning of Linear LED Strip-lights (12 Watt /Metre) for installing in False-ceiling Coves together with requisite driver etc. complete as required. with 2 years Warranty against any manufacturing defect working under standard electrical condition

Supply and installation of high speed wall fan

Wooden wall partition-wall partition for the board room after passage area by using 6mm and 9mm thick bwr plywood laminated with mica with approved design,pattern and colour. The rate inclusive of material, labour and conveyence etc…

Toughened glass door : Providing fixing door of 12mm thick Toughened glass door ( Saint gobain) with Dorma/ozone) patch fiiitngs ( floor spring ,Top patch ,pivot Pin ,Boottom patch ,Corner size:1.1*2.1

DIAS TABLE :Providing and fixing in place table of size 3000 mm x 600 mm x 750 mm with one under shelf made of a combination of BWR grade 6 mm, 12 mm and 16 mm plywood of approved quality and make; All exposed EXTERIOR portions of the plywood will be finished with 1mm thick Laminate of approved make and shade. The inside portion of the table will be finished with 0.8mm laminate. The rate will include all other necessary hardware.

Dias Chair

STANDING COMMITTEE MEMBERS TABLE: :Providing and fixing in place table of size 3000 mm x 600 mm x 750 mm with one under shelf made of a combination of BWR grade 6 mm, 12 mm and 16 mm plywood of approved quality and make; All exposed EXTERIOR portions of the plywood will be finished with 1mm thick Laminate of approved make and shade. The inside portion of the table will be finished with 0.8mm laminate. The rate will include all other necessary hardware. Three seater

Standing Committee Members Chair

CURVED MODEL MEMBERS TABLE: :Providing and fixing in place table of size 2700 mm x 600 mm x 750 mm with one under shelf made of a combination of BWR grade 6 mm, 12 mm and 16 mm plywood of approved quality and make; All exposed EXTERIOR portions of the plywood will be finished with 1mm thick Laminate of approved make and shade. The inside portion of the table will be finished with 0.8mm laminate. The rate will include all other necessary hardware. Three seater

Memebrs Chair 3 setaer modular sofa model made with the combination of 6/9/12 mm thick marine ply wood exterior portion coverned with 1 mm mica lamination and seating and back rest covered with high quality densed cushion and good quality fabric with approved colour, size and design

Providing and fixing in place table of size 1800 mm x 600 mm x 700 mm made of a combination of BWR grade 6 mm, 12 mm and 18 mm plywood of approved quality and make; All exposed EXTERIOR portions of the plywood will be finished with 1mm thick Laminate of approved make and shade. The inside portion of the table will be finished with 0.8mm laminate. The rate will include all other necessary hardware.Two seater

Staff chair

Pantry table made with 9/12/16 mm ply wood and mica lamination with under cup board. The rate inclusive of material labour, conveyence, hardwares etc….

Gallery plat form work for members seating: Providing and fixing gallery frame work as per the approved pattern frame work made of a combination of M/S frame work and covered with BWR grade , 12 , mm plywood of approved quality and make; All exposed EXTERIOR portions of the plywood covered with paint finish .The rate will include all other necessary hardware and Adhesive etc. Also provide with hand rail up to height 75 cm from the gallery on both side of the passage to the dias entry up to 4 mtr length.

Sound System Chairman unit Chair man Unit/Ahuja/Cmc5100/ equilent

Deligate unit/Ahuja/Cmd5200/equilent

Amplifier/Ahuja/ Cma5400/equilent

Wallspeaker /Ahuja/Ps 500/ equilent

Wireless Mic/Ahuja/studio master/equilent

Installation testing and commissioning including all accessaries

Accoustic Paneling : wall/ ceiling Supply and Fixing Accoustic Panelling Withfully Perforated Gypsum Plaster Board Of Size 600 x 600 x 12.5 mm Having Approx. 15% Perforated Area with Performation Size And Pattern As Per manufactures Spec. with All 4 Side Tapered and Backed By Accoustic Tissue with NRC Value Not Less 0.60. Providing and Fixing Sound absorption panel with Resin Bonded Fibre glass wool conforming to IS : 8183, density 24kg / m3, 50mm thick, wrapped in 200 G Virgin Polythene bags,fixed to ceiling /paneling with metallic cleats @ 60 cm and wire mesh of 12.5 mm x 24 gauge wire mesh, for top most ceiling /paneling including all materials and labour charges etc

Laying of floor carpet with suitable gum and approved color and design. The rate inclusive of labour material and conveyence

Loading and unloading ,transportation and cleaning Charges