Fish seed Farm at Kanatharkunnam_Phase II Development_Electrification

Amount

Fabricating, supplying, conveying, lifting and erecting double arm tubular post of overall height of 7m using 6m 80mm and 3.0m 50mm Heavy G.I. Pipe with suitable mounting pipe for fixing led fitting with socket diameter 32-40 mm having ISI mark and of approved quality as per the drawing, erected on a RCC 1:2:4 foundation in 4 Nos well steining of 0.25m depth ,bottom ring dia -0.75m, top three rings dia 0.6m. with muffing of 0.4x0.4m with height 0.6 m. The post shall be erected on 4 numbers of 20 mm dia GI foundation bolts of length 2.5 m having 100mm long standard thread with a 20 mm thick GI flange suitable for 80mm C class pipe at the bottom of the post and 20 mm thick MS flange on the muffing with 4 nos of 20mm bolt holes and 3Nos of 20mm nuts per bolt. The bottom of the post shall be provided with suitable size stiffner pieces.The post is to be painted with two coats of best quality industrial epoxy paint of approved colour over two coats of industrial epoxy primer . Muffing to be plastered using cement mortar 1:4, 12mm thick colour washing 2 coats using approved colour etc. complete.All GI pipe sections to be used for the fabrication of the post shall be of TATA/ZENITH/APOLLO make with ISI mark..All steel items shall be hot dip galvanised.

Supplying LED Flood light luminaire Schreder make CITY or equivalent 40W LED,>=3500 lumen , electrical Class I, extruded aluminium body, an extra clear toughened glass protector , IK 08 impact resistance permanently robotically sealed onto the body with a silicone sealant, closed at one end by an end cover and the other end by a frame and door assembly. IP 66 optical & control gear compartments with direct access to control gear, bracket suitable for a wall or high mast mounting, each LED with a specific lens for area lighting the luminaire shall have a CCT of 5700K and Colour Rendering Index >70, a driver (efficiency > 85%) with internal surge protection of 4/4 kV , Power Factor > 0.95, a residual flux of 70% (L70) @ 50,000 hours at Ta 500.modular family street light luminaire,System efficacy= >95 lumen/watt, Driver efficiency >= 85%,Power factor ≥0.90,colour rendering index≥70 and cool white light - 5700ºK, with five year warranty for the light fitting.

Conveyance, installation, testing and commissioning of departmentally supplied flood light / Area light luminaire with lamp on the existing tubular post of height upto 8m from ground level.

Wiring for light point/ fan point/ exhaust fan/call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required(Group C)

Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.20mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.25mm

Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.3 X 1.5 Sq.mm

Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.3 X 2.5 Sq.mm

Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.3 X 4 sq.mm

Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.5 X 4 sq.mm

Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mm X 75mm)

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mm X 75mm)

Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 Amp switch

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

Supply and fixing brass batten / angle holder including connection etc as required

Supply and fixing 7/9 W LED lamp OSRAM / Philips or equivalent

Supplying 20 W LED Tube with box type fixtures Essential LED tube 1200 mm Philips or equivalent

Supplying Keselec Schreder make Street light luminaire SID 20W LED, an IP66 optical & control gear compartment, a die cast aluminium painted housing, Polycarbonate protector with in built lenses, with easily accessible control gear compartment, suitable for horizontal mounting (Ø32- 42mm), System power (including driver loss) of 20W with luminous efficacy > 90 Lumen/W at Ta 25⁰C. Lifetime residual flux @ Tq 35⁰C @ 50,000 hours = 70%, Ta = 50⁰C, in built surge protection of 4kV (in Differential and Common mode), Power Factor > 0.95, Colour Rendering Index > 70 and Cool white light (5700⁰K).

Supply of ceiling fans of 1200 mm sweep Category B Ceiling fan excluding resistance type regulator

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable etc. as required.

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required.

Supply of single phase , 230V ,90W,1400 rpm, 300 mm sweep heavy duty exhaust fan ( Almonard or equivalent) in metal frame with louvers Category B ,

Installation of exhaust fan upto 450 mm sweep in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.

Supplying and fixing 12 Way , Double door, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

Supplying and fixing TP sheet steel enclosure on surface/ recess along with 16/25/32 A, 415 V “C” curve TP MCB complete with connections, testing and commissioning etc. as required

Supplying and fixing 40A, two pole, (single phase and neutral), 240 volts,Residual current circuit breaker with Overcurrent Protection (RCBO), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 40A, four pole, (three phase and neutral), 415 volts,Residual current circuit breaker with Overcurrent Protection (RCBO), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing four pole, 415 volts, 40A isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Providing and fixing 0.3 m , 20 mm X 3 mm copper strip on surface or in recess for connections etc. as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Above 35 sq.mm and Upto 95 sq. mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Upto 35 sq. mm (clamped with 1mm thick saddle).

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Above 35 sq.mm and Upto 95 sq. mm (clamped with 25x3 mm Flat clamp)

Supply of 4 core 16 sq mm PVC insulated and PVC sheathed armoured aluminum cable

Supply of 4 core 10 sq mm PVC insulated and PVC sheathed armoured aluminum cable

Supply of 4 core 4.0 sq mm PVC insulated and PVC sheathed armoured copper Power cable

Supply of 3 core 2.5 sq mm PVC insulated and PVC sheathed submersible copper cable

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4C X 16 sq. mm (28mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4C x 10 sq.mm (25mm)

Supplying and making end termination nickel plated single compression brass cable gland for 4 core 4 sq mm PVC insulated and PVC sheathed armoured copper conductor cable 1.1 KV grade, including providing earth clip and superior quality copper cable socket.

Supplying and making straight through joint with cast resin compound including ferrules and other jointing materials for PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. 4c x 16 sq.mm

Supply of 50/38mm (OD/ID) Double Walled Corrugated (DWC) pipes made out of HDPE for mechanical protection to under ground power/communication/ OFC / Signal cable conforming to IS 14930 Part - II,

Excavation for cable trenches of depth upto 1.2 m in soft soil including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metre.

Providing and fixing10 SWG copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Supply and laying bare earthing copper conductor 10 SWG laid 0.6 m below ground level including excavating trench of suitable size and refilling etc. as required (in Ordinary soil).

Supply and providing 25x6 mm brass bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required

Supply of superior quality copper earth socket for the 3.15mm (10 SWG) earth conductor including crimping etc. as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. (but without charcoal/ coke and salt) as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole 6A ,10A

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Double pole 6A

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole 10A,20A

Supply and fixing Thermoplastic polycarbonate Cable Junction Boxes IP 65 for outdoor applications ( with knock outs for cable entry )) suitable for cable sizes 16 sq.mm ,182 X 180 X 111 mm CAPE model No TKPC1818 -11m withTerminals or equivalent and accessories for Cable Junction Boxes such as Copper Terminal Set including fixing the accessories using suitable size Stainless steel Bolt and nut, giving necessary connections, making good the damages etc. as required.

Supply and fixing 3 phase,415V,1 kVAR , ISI marked Heavy Duty Power factor improvement Capacitor with test certificate in the existing enclousure

Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.

Providing and laying in position reinforced cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required (excluding reinforcement).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.

Providing brick work (in width 225 mm or more) with F.P.S. bricks of class designation 7.5 in cement mortar 1:4 (1 cement : 4 coarse sand) at all levels.

Providing 15mm thick cement plaster of mix 1:4 (1 cement : 4 fine sand) at all levels.

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Supplying, fabricating , erecting and commissioning wall mounting, dust and vermin proof cubicle BLOWER panel board of size 1000x1000x250mm or nearest suitable size using 16 G CRCA MS sheet, painting two coats of best quality synthetic enamel paint over a coat of epoxy primer, having separate hinged door and quarter turn key lock covers for incomers and outgoing and power capacitor and front openable bolted type door for wireway box with cable entry provisions , terminal block using 20 A Elmex connector for taking out the supply to the motor, bolted type cable glanding plate using 14 SWG CRCA MS sheet at the top and bottom . Incoming:- 50A, 25kA FP MCCB setted to 40 A and rotory drive kit including BUC handle- 1No.outgoing-16A, 16kA,TP MCCB, complete with rotory handle - 3 Nos,panel surface mounting 96mm square 3 line LED type Multifuntion meter with V,I and frequency measurement(vif) socomec or equivalent suitable for 230 ac 50Hz-1 Nos,32A two way disconnectable type neutral link-3 Nos,2A single pole MCB (C curve) - 12 Nos,16mm dia LED type Phase indication lamp-Red and Yellow - 5 Nos,16mm dia LED type Phase indication lamp- Green - 3 Nos,16mm dia LED type Phase indication lamp Blue colour-1No,30/5,5VA, metering tapewound C.T of accuracy class 1- 3Nos,Legend Plate Danger,415V ,100x75mm , MOTOR start and run - 3Nos.Busbar Chamber: Busbar chamber with 25X3mm Copper strips 4 Nos or equivalent size one each for phases and neutral fitted on epoxy insulator. Switch interconnections to be done with suitably rated Copper conductors insulated with PVC heat shrinkable sleeves. Interconnections with the incoming and is also to be carried out using 25x3mm PVC insulated Copper strips supported using epoxy insulators and outgoing with suitable rated copper conductor as required. Protection and Motor starter415V ,9A, 3 pole contactor AC-3 duty with 1NO+1NC contactor- 3 Nos,MPR 302 BE 040 L&T make motor protection Relay - 3 Nos,20A 415V AC ELMEX Connecter DIN Rail - 12 Nos,25 A,415V,50Hz Push button unit ON and OFF - 3 set,All MCCBs shall be Ics= 100% Icu.The components should be wired using 4sq.mm PVC insulated copper wire and terminations for input and output will be done using 20A Elmex Connector.

Dismounting the existing 5m light pole with lamp from the foundation by dis connecting the existing cable and keeping at a safe location.

Lifting the existing foundation , and erecting in a new location with in 5m by excavating ground ,refilling complete.

Mounting the existing 5m light pole with lamp on the the existing foundation and connecting the existing cable and giving cinnection etc complete.

Providing and fixing B class G.I. pipes with ISI mark complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. 50 mm dia nominal bore

Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required (for the installation of outdoor light fittings).40 mm dia with clamps made from 20 x 3 mm MS flat

Dismounting the existing Panel board from the office room and fixing in the Electrical room after disconnecting the cable.

Supply and fixing cast aluminium stove enameled elliptical shaped bulk head fittings with porcelain holder and mesh guard suitable for LED Lamps including connection etc as required.

Supplying and fixing 4 way , Double door horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)