Delhi

Active

Works

Civil Works

Repair, Renovation work at Delhi Institute of Hotel Management, Lajpat Nagar-IV, New Delhi under South-East(Bldg.)M., Hauz Khas, New Delhi, during 2026-27.

Public Works Department

LAJPAT NAGAR | South East Delhi, Delhi

Amount: ₹2.1 CrCloses: 26 Sept 2026Due tomorrow

Timeline

Published19 Sept 2026
Closes26 Sept 2026
Bid Opening26 Sept 2026

Tender Value

₹2.1 Cr

EMD Value

₹4.3 L

Closing Date

26 Sept 2026, 3:00 pmDue tomorrow

Tender Inviting Organisation

Name

EXECUTIVE ENGINEER

Address

Executive Engineer South East (Bldg.) Division, Huaz Khas, New Delhi-110016

Work Description

Repair, Renovation work at Delhi Institute of Hotel Management, Lajpat Nagar-IV, New Delhi under South-East(Bldg.)M., Hauz Khas, New Delhi, during 2026-27.

Tender Information

Tender ID

2026_PWD_298681_1

Reference Number

46/EE/PWD Divn. South East Bldg/2026-27

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Works

Period of Work

120 days

Location

LAJPAT NAGAR

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

14 documents required · 14 mandatory

Fee/PreQual/Technical

RequiredCopy of receipt for deposition of original EMD along with scanned copy of EMD (.pdf)

RequiredValid CPWD registration certificate of appropriate category (.pdf)

RequiredCertificate of Financial Turnover from CA as per Form-A (.pdf)

RequiredBankers certificate or Net Worth Certificate as per Form B or B-1 (.pdf)

RequiredCertificates of Work Experience and performance as per Form-C AND D (.pdf)

RequiredAffidavit regarding debarment and blacklisting as per Form-E (.pdf)

RequiredAffidavit on Non Judicial Stamp Paper of Rs. 100/- regarding back to back (.pdf)

RequiredAffidavit on Non Judicial Stamp Paper of Rs. 100/- Undertaking on structural stability (.pdf)

RequiredCopy of PAN Card issued by Income Tax Department (.pdf)

RequiredAddress for communication, Mobile cell number, e-mail address (.pdf)

RequiredGST registration Certificate, if already obtained by the bidder (.pdf)

RequiredBidders are required to upload the NIT in PDF as uploaded by EE (.pdf)

RequiredCopy of applicable licenses/registration of Labour License with EPFO, ESIC (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹4.3 L

Important Dates

Last Activity

19 Sept 2026

Published

19 Sept 2026

Bid Opening

26 Sept 2026

Download Starts

19 Sept 2026

Download Ends

26 Sept 2026

Submission Starts

19 Sept 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (118 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :
1.01	All kinds of soil	-	-	-	-
1.02	Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia	16	mtr	352.15	₹5,634.4
2Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
2.01	1:5:10 (1 cement : 5 coarse sand(zone-III) : 10 graded stone aggregate 40 mm nominal size)	2	Cum	6,518.6	₹13,037.2
3Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
3.01	1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).	4	Cum	9,045.75	₹36,183
4Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
4.01	Thermo-Mechanically Treated bars of grade Fe-500 D or more.	352	Kg	107.85	₹37,963.2
5Providing and fixing in position Stainless steel Grade 304 plate-1.0 mm thick as per design for expansion joints.

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 2.13 MB

Work Item Documents

BOQ_398390.xls

BOQ • 0.44 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :
1.01	All kinds of soil	-	-	-	-
1.02	Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia	16	mtr	352.15	₹5,634.4
2Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
2.01	1:5:10 (1 cement : 5 coarse sand(zone-III) : 10 graded stone aggregate 40 mm nominal size)	2	Cum	6,518.6	₹13,037.2
3Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
3.01	1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).	4	Cum	9,045.75	₹36,183
4Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
4.01	Thermo-Mechanically Treated bars of grade Fe-500 D or more.	352	Kg	107.85	₹37,963.2
5Providing and fixing in position Stainless steel Grade 304 plate-1.0 mm thick as per design for expansion joints.

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :

1.01

All kinds of soil

1.02

Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia

mtr

352.15

₹5,634.4

2Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

2.01

1:5:10 (1 cement : 5 coarse sand(zone-III) : 10 graded stone aggregate 40 mm nominal size)

Cum

6,518.6

₹13,037.2

3Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :

3.01

1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).

Cum

9,045.75

₹36,183

4Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.

4.01

Thermo-Mechanically Treated bars of grade Fe-500 D or more.

352

107.85

₹37,963.2

5Providing and fixing in position Stainless steel Grade 304 plate-1.0 mm thick as per design for expansion joints.