T.No.-EDC(USN)32/2024-25

Amount

Annexure-A (LABOUR CHARGES)

Earthing of support with M.S. Earth rod of 2.5 meter long by hammaring of M.S. Rod to proper depth and connecting the earth electrode with the help of G.I. wire as per construction manual.

Fabrication of MS Channel angle iron etc in required sizes with drilling of holes upto good finish for top channel ,bracing and special type bracket etc. as per RESPO schedule and local approced drawing.

Excavation of earth for stay pit of size 0.6x0.6x1.2 mtr in all types of soil including proper dressing of sides and ramming of bottom including getting out the excavated soil and disposal of surplus excavated soil as directed complete work

Fixing, tightening and nozzling of stay with pole and stay rod on required tension as per drawing/manual in LT line

Fixing, tightening and nozzling of stay with pole and stay rod on required tension as per drawing/manual in 11 KV Line

Grouting of Stay in size 0.6x0.6x0.3 in CC ratio 1:4:8 (1 cement : 4 graded stone 20mm nominal size : 8 coarse sand ) block including cost of Cement, sand and stone ballast back filling of soil and boulders in pit and ramming and proper alignment, leveling as per RESSPO Manual.

Excavation of earth for pole pit of size 0.9x0.6x1/6 of full length of pole for erection of pole in all types of soil including proper dressing of sides and ramming of bottom including etting out the excavated soil and disposal of surplus excavated soil as directed complete work

Erection of PCC single support pole in proper level and alignment along with fixing of all accessories like top channel & clamps as per RESPO manual

Erection of SP-55 single support pole in proper level and alignment along with fixing of all accessories like top channel & clamps as per RESPO manual

Muffing of poles size 0.45x0.60 cm radius with 1:3:6(1 cement:3 coarse sand :graded stone 10 mm nominal size) block size 45 cm height from ground level including cost of cement,stone and sand etc.

Dismantling of existing LT/HT line. including disc fitting, Insulator, clamps, Nut & Bolts and consumer connections and Street light connections etc. including rolling of conductor and cartage back from site to JE store(SP-55 Single Pole)

Laying of overhead LT service Cable From Pole to consumer end meter alongwith supporting GI wire

Route cleareance by cutting of tree branches / proning, lopping and chopping of trees for L.T., 11 & 33 KV line.

Cartage of PCC Poles from store centre to construction site with loading, unloading at both points and proper stacking.(Distance 21- 50 Km)

Cartage of ST pole SP-55 Poles from store centre to construction site with loading, unloading at both points and proper stacking.(Distance 21-50 Km)

Cartage of other material (other than poles) by vehicle from Store Center to nearest construction site Store including loading and unloading at both ends (distance 21-50 Km)

Headload cartage of PCC Pole from road to site(distance 0-1 Km)

Headload cartage of SP-55 Pole from road to site(distance 0-1 Km)

Head load cartage of small material (distance 0-1 Km)

Straightning of Tilted STP Poles

Straightening of Tilted PCC Poles

Tightening of Stay Set

Resagging of 11 KV Line

Resagging of LT Line

Rectification, Replacement and Rejumpering of Jumpers on LT/HT Pole Supports

Back Cartage of Petty Materials (distance 0-20 Km)

Dismantling of damage LT XLPE Cable (3.5 Core and single core) from DTR to Pole

Welding of Rusted Pole

Annexure-B (SUPPLY ITEMS)

Supply of Nut & Bolt Off size

Supply of F-Clamp

Supply of M.S. Holding Clamps

Supply of PG Clamp for Dog/Weasel

Supply of LT Clamp for PCC Pole with N&B

Supply of LT Clamp with N&B for ST Pole SP-55

Supply of Stay Clamp for ST Pole with Nut Bolt

Supply of Shackle Insulator 75x90 mm with Nut Bolt

MANRAJ ELECTRICAL & INFRASTRUCTURE (BID ID -345247)

M/S GURU NANAK ENTERPRISES (BID ID -345692)