PROVISION OF STEEL FRAMED GALVALUME ROOF SHED ON EXISTING OPEN PARKING AREA OF TYPE IV ACCOMMODATION 02 BUILDING AT COAST GUARD ENCLAVE PROVISION OF DEFICIENT WATER HEATERS EXHAUST FANS POWE SOCKES AND CONNECTING ITEMS IN SAILORS MARRIED ACCOMMODA

Amount

Supply, installing & Testing Water heater(Geyser) storage type of capacity 25 liters, 02 KW capacity, glass lined coated inner tank, suitable installation with grouting of Nuts, Bolts and washers of suitable size as recommend by the manufacturer including 02 KW heating element, cable of suitable size as recommended by manufacturer, with 3 pin plug Top of suitable capacity, etc complete all as specified and as directed at site by the Engr-in-charge. Make : V-Guard /Havells/Crompton/Bajaj

Supplying & Laying, connecting and testing , tube medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors if size 15 mm dia, all as specified and as directed by Engr-in-Charge.

Stop valve, cost copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed of size 15 mm complete all as specifed and as directed at site.

Bib taps, Chromium plated , fancy type, screwed down, screwed for iron pipe or for brass ferrule and fixed of size 15 mm complete all as specifed and as directed at site.

PVC connection for Hot Water 15mm with CP nuts and bolts and washers of length 600mm complete all as specifed and as directed at site.

PVC connection for cold Water 15mm with CP nuts and bolts and washers of length 600 mm complete all as specifed and as directed at site.

Supply and fixing single pole and neutral enclosure with a two pin and earth plug and socket complete with provision of DIN rail and one Double pole MCB 20 Amp.

Point wiring with PVC insulated, PVC unsheathed cable, single core, stranded, copper conductor FRLS cable 1.5 sqmm size, drawn in and including non metallic concealed conduit of size not less than 20 mm as per required ISI marked of colour white/ivory, medium grade and including PVC unsheathed, 1.5 sqmm stranded copper cable (green insulation) for continuous earth wire and including pressed steel concealed terminal boxes of required size of 1.6 mm thick, covered with 3 mm thick plastic laminated bakalite sheet, ISI marked for the following :- (a) One Exhaust fan/One Socket Point 5 Amp controlled by one switch

Ceiling rose, 3 phase/PVC/polycarbonate, isolated body for surface type, bakelite 65x50mm three terminal.

Switch piano flush type single pole one way 5 amps, 230V AC

Supply and fixing switch socket combination 2-in-1 3 pin 5 and 15 Amps

Supply and fixing switch socket combination (fulsh type) 5 pin 5 Amps

Supply and fixing Exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver complete all as directed by Engr-in-charge at site

Material and labour for cutting holes of size 300 mm dia in brick walls or in cement mortar wall or in stone walls and making the good to disturbed surfaces and including provision of 04 Nos reg bolts all as directed by Engr-in-Charge.

Two single core (submain) PVC insulated FRLS cable with 4 sqmm nominal cross sectional area stranded copper conductor and one single core green PVC insulated FR cable 2.5 sqmm stranded copper conductor earth continuity cable drawn through non metallic rigid PVC concealed conduit including PVC conduit non metallic rigid PVC concealed (ISI Marked) medium grade not less than 25mm with all fittings and fixing accessories, concealed in wall including cutting chases and making good disturbed surface to match complete.

ELCB/RCCB Double pole , 30mA of capacity 25 amp rating, with enclosure complete all as specified and as directed by Engr-in-Charge.

Point wiring on wall and surface wiring on ceiling/roof/truss/false ceiling with necessary fixing arrangements with PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including rigid non metallic white / ivory PVC conduit medium grade ISI marked not less than 19 mm dia with all conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc including anodized Modular sunken boxes made out of MS sheet of standard thickness with earth dolly and crown plate and cover plate for fixing of switches / sockets, fan regulators, wall mounting fittings, door bell & bulkhead etc with captive MS screw including PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing all as specified and directed by Engineer-in-Charge for the following:- (a) For one light/ fan point controlled by one switch.

Supply and lay of LT UG cable XLPE with aluminum conductor, Screened bedded multistranded 1100 volts grade in Galvanised steel strip or wire armored, heavy duty electric power cables with stranded aluminium conductor, cross-sectional area of size 6 sq mm 2 Core.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5m in depth for taking out/laying cable and getting out, in Soft/Loose Soil.

Returning, filling in including spreading levelling, watering and well ramming in layers not exceeding 25 cm in any type of soil.

Removing excavated material to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point.

Supply spreading in trenches fine dry crushed stone sand for cable protection and punning down gently by hand all as specified.

Supply and lay Bricks for LT Cable old size all as specified and as directed.

Energy efficient LED light fitting 1x 18/20 watt, four feet , white batten fittings with drivers etc complete with all accessories & Provn of three core cable of copper conductor of size 0.75 sqmm, making necessary electric connetion from ceiling rose to fitting terminal , fixing the fitting on wall including all necessary fixing accessories complete all as directed .

Pressed sheet metal enclosure (MCB DB), 4 way SPN with 200 Amps rated bus bar, double door type, 240 volts complete.

MCB single pole & Neutral 6 to 32 amp 240 volts, "C" series 10 KA breaking capacity & connection complete as directed.

MCB single pole 6 to 32 amp 240 volts, "C" series 10 KA breaking capacity & connection complete as directed.

Dismantling of stone slab and tiles of any type , any description or thickness laid bedded and pointed in any mortar as in floors,aprons etc.

Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation, etc., and getting out in hard/dense soil.

PCC type D-2, 1:4:8 (using 40 mm graded aggregate) as in foundations, filling and mass concrete.

Brick work with fly ash bricks straight or curved on plan exc 6 m mean radius built in CM 1:4.

Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built int in cement mortar 1:4.

40 mm thick damp proof course to horizontal or vertical surfaces including necessary formwork in cement concrete 1:2:4, type B-0.

Providing cement concrete 1:2:4 type B-1 (using 20 mm graded aggregate) in copings, cill & lintel etc.

Rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement including mixing with liquid WPC all as per manufacturers instructions complete. (Note :- Liquid WPC will be measured and paid separately)

Rendering 15 mm thick in cement mortar 1:6 on stone masonry surfaces or surface other than fair face of brickwork finished even and smooth without using extra cement.

Supply only integral liquid water proofing compound.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; rough finished surfaces of concrete flat.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, bands, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc rough finished surfaces of concrete flat.

M&L RCC (design mix) M-25 (using 20 mm graded aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; post hole, bases for columns, etc.; basement slabs, under-reamed piles and mass concrete. Note: Design Mix M-25 shall be caaried out as per IS 456:2000 from any Govt. approved Lab/Govt. Engingeering College/NIT and design mix sall be approved BY GE/AGE ( I ) before incorporation in the work.

RCC (design mix) M-25 (using 20 mm graded aggregate) as in beams, bands, cantilevers, bressummers, lintels over 1.5m span. Note: Design Mix M-25 shall be caaried out as per IS 456:2000 from any Govt. approved Lab/Govt. Engingeering College/NIT and design mix sall be approved BY GE/AGE ( I ) before incorporation in the work.

10 mm dia and over TMT bars cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips.

5 mm dia and over upto and including 10 mm dia TMT bars , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia in stirrups, spacers and binders.

Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20 mm of the length indicated) confirming to IS 1161-1979 Gde-St -240.

Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confirming to IS 1161-1979 Gde-St -240.

Mild steel plates, plain or chequered, 5 mm thick or over in thickness in available sizes confirming to Fe 410-W Gde-E-250 quality-A.

Mild steel bolts purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut, exc 30 cm long, neck diameter exc 20 mm not exc 25 mm.

Pre-printed galvalume aluminum zinc coating GI based corrugated steel sheeting of 0.50 mm thick, having tensile strength 550 Mpa, fixed with self tapping screw with washers as roof covering.

All as per item No. 48.00 here-in-before but plain sheet on ridges fixed with screw with washers on roof.

Preparation of newly plastered surfaces of walls and applying two coats cement base paint over a coat of primer.

Preparation of new plastered surfaces and applying three coats of white wash on walls.

Preparation of new or previously un-treated steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer.

Hard core broken stone/boulder of gauge n exc 63 mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface.

75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded aggregate) as in floors (chequered finish)/ sub-base or plinth protection, finished even and smooth using extra cement.

Forming 10 mm wide and 30mm deep joints at each corner or at 2.00 m interval filling the same with mastic filling i.e one part of bitumen 85/25 and three part of sand.

50 mm thick PCC 1:2:4 type B-1 (using 20 mm graded aggregate) finished even and smooth without using extra cement including making immpressions as in hard standing.

100 mm thick PCC 1:4:8 type D-2 (using 40 mm graded aggregate) as in sub-base

M&L PCC 1:2:4 type B1 (using 20mm graded aggregate ) as in surface channels and drains

Extra for forming fair finishing to drain or channel 30 cm inner girth in cement concrete using extra cement including forms, mitred/ stopped ends, etc.

Glass dividing strips, 3 mm thick and inserted in as per design

Removing excavated material (soils) exc 250 m but not exc 500 m and depositing where directed at a level not exc 1.5 m above the starting point.

K Satyanarayana

N Sydeswara Rao

CAPITAL STEEL TUBE CO