CIVIL WORK

EARTH WORK EXCAVATION FOR FOUNDATIONS AND DEPOSITING ON BANK, FOR ALL LIFTS AND WITH AN INITIAL LEAD OF 10M INCLUDING ALL INCIDENTAL, OPERATIONAL, LABOUR CHARGES SUCH AS SHORING, SHEETING, PLANKING, STRUTTING, ETC. COMPLETE FOR FINISHED ITEM OF WORK EXCLUDING DEWATERING CHARGES ETC AS PER SS - 20 B FOR STIFF BLOCK COTTON SOIL , HARD RED EARTH, MURRAM, ORDINARY GRAVEL - MANUAL MEANS UP TO 3M DEPTH - FOUNDATION OF BUILDING (APSS 308).

CEMENT CONCRETE (1:5:10) PROP. USING 40MM HARD GRANITE MACHINE CRUSHED METAL WITH MACHINE MIXING UP TO PLINTH LEVEL INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LAYING, CURING, FINISHING, ALL OTHER INCIDENTAL, OPERATIONAL, LABOUR CHARGES BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. FOUNDATION BED AND UNDER STONE SLAB FLOORING. (APSS NO: 402).

PRE-CONSTRUCTION ANTI-TERMITE IS A PROCESS IN WHICH CHEMICAL TOXICTO SUBTERREAN TERMITES IS APPLY/ INJECT INTO SOILD URINGEARLY STAGE OF BUILDING CONSTRUCTION 2.TREATEMENT OF SOIL BENEATH THE BUILDING AND AROUND THE FOUNDATIONS CONDUCT AND CHEMICAL USE AS PER BIS -IS6313(PART 2) 2013 CODE SPECIFICATION &CIBR CREGISTERED TERMITICIDE WHICH CREATE SACONTINUOUS CHEMICAL BARRIER BENEATH THE BUILDING WHICH KILLS ORREPELS TERMINATES&IMPERVIOUS TOTREMITE ENTRY IMIDACLOPRID30.5%SC(IS63131)DISSOLVE 2.1 ML/1 LITER OF WATER AND APPLY EMULSION/SOLUTION @7.5LITRES/SQUAREMETER (SQM) OF INTERNAL, EXTERNAL VERTICAL SURFACE OF THE COLUMS, PLINTH BEAMS (BACK FILLING)WALLS AND FLOOR JUNCTION,EXTERNAL PERIMETERS, ALONG REATINING [email protected]/SQM OF THE HORIZONTAL SURFACE OF BASEMENT TOP SURFACE OF TE BASEMENT FILLING BELOW FLOORING BED(PLINTH) & @ 2.0 LITRES/ LINE METER AT EXPANSION JOINTS. THE SUBSTRUCTURE OF A DEPTH OF 500MM AROUND COULMNS &300MM DEEP AROUND PLINTH BEAMS,BASEMENTS & FLOOR FILLING AREA INCLUDING EXCAVATION CHANNEL ALONG THE WALL & RODDING ETC. COST & CONVEYANCE OF ALL MATERIALS TO THE SITE, COST OF LABOUR FOR SPARYING, RODDING ETC.COMPLETE FOR FURNISHED ITEM OF WORK AS PER THE APPROVAL OF THE ENGINEER-IN-CHARGE

RE-FILLING WITH EXCAVATED EARTH IN LAYERS NOT EXCEEDING 15 CM THICK, CONSOLIDATING EACH DEPOSITED LAYER BY WATERING AND RAMMING INCLUDING COST AND CONVEYANCE OF WATER TO WORK SITE AND ALL INCIDENTAL, OPERATIONAL, LABOUR CHARGES BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. IN TRENCHES, SIDES OF FOUNDATIONS AND BASEMENT. (APSS NO. 309 & 310)

FILLING WITH CARTED GRAVEL OBTAINED FROM APPROVED QUARRY IN LAYERS NOT EXCEEDING 15 CM THICK, IN BASEMENTS, CONSOLIDATING EACH DEPOSITED LAYER BY WATERING AND RAMMING INCLUDING COST AND CONVEYANCE OF WATER TO WORK SITE AND ALL OPERATIONAL, INCIDENTAL, , LABOUR CHARGES, HIRE CHARGES OF T & P BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. (APSS NO. 309 & 310)

MASONRY WORK IN CM (1:6) PROP WITH FLYASH CEMENT SOLID BLOCKS OF SIZE 290 X 225 X 140 MM & 290 X 100 X 140 MM WITH A COMPRESIVE STRENGTH NOT LESS THAN 50 KG/SQM INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, [EXCLUDING SEIGNIORAGE CHARGES], SCAFFOLDING AND CURING ETC., CPOMPLETE FOR FINISHED ITEM OF WORK. BASEMENT WALLS 335 MM THICK.

MASONRY WORK IN CM (1:6) PROP WITH FLYASH CEMENT SOLID BLOCKS OF SIZE 290 X 225 X 140 MM WITH A COMPRESIVE STRENGTH NOT LESS THAN 50 KG/SQM INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, SCAFFOLDING AND CURING BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. SUPERSTRUCTURE WALLS 225 MM THICK GROUND FLOOR (APSS NO. 501&504).

MASONRY WORK IN CM (1:6) PROP WITH FLYASH CEMENT SOLID BLOCKS OF SIZE 290 X 225 X 140 MM WITH A COMPRESIVE STRENGTH NOT LESS THAN 50 KG/SQM INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, SCAFFOLDING , LIFT (MANUAL) AND CURING BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. SUPERSTRUCTURE WALLS 225 MM THICK FIRST FLOOR (APSS NO. 501&504).

MASONRY WORK IN CM (1:6) PROP WITH FLYASH CEMENT SOLID BLOCKS OF SIZE 290 X 225 X 140 MM WITH A COMPRESIVE STRENGTH NOT LESS THAN 50 KG/SQM INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, SCAFFOLDING , LIFT (MANUAL) AND CURING BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. SUPERSTRUCTURE WALLS 225 MM THICK SECOND FLOOR (APSS NO. 501&504).

MASONRY WORK IN CM (1:4) PROP WITH FLYASH CEMENT SOLID BLOCKS OF SIZE 290 X 100 X 140 MM WITH A COMPRESIVE STRENGTH NOT LESS THAN 50 KG/SQM ,INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, SCAFFOLDING AND CURING ETC., COMPLETE FOR FINISHED ITEM OF WORK INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, SCAFFOLDING AND CURING ETC., COMPLETE FOR FINISHED ITEM OF WORK. PARTITION AND PARAPET WALLS 100 MM THICK GROUND FLOOR (APSS NO. 501&504). (EXCLUDING SEIGNIORAGE CHARGES)

MASONRY WORK IN CM (1:4) PROP WITH FLYASH CEMENT SOLID BLOCKS OF SIZE 290 X 100 X 140 MM WITH A COMPRESIVE STRENGTH NOT LESS THAN 50 KG/SQM ,INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, SCAFFOLDING AND CURING ETC., COMPLETE FOR FINISHED ITEM OF WORK INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, SCAFFOLDING AND CURING ETC., COMPLETE FOR FINISHED ITEM OF WORK. PARTITION AND PARAPET WALLS 100 MM THICK FIRST FLOOR (APSS NO. 501&504). (EXCLUDING SEIGNIORAGE CHARGES)

PLAIN CEMENT CONCRETE (1:3:6) PROP. USING 20MM GRADED HARD GRANITE MACHINE CRUSHED METAL INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE,CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, MACHINE MIXING, LAYING, CURING, FINISHING, ALL OTHER INCIDENTAL, OPERATIONAL, LABOUR CHARGES BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. BED BLOCKS IN GROUND FLOOR (APSS NO: 402).

PLAIN CEMENT CONCRETE (1:3:6) PROP. USING 20MM GRADED HARD GRANITE MACHINE CRUSHED METAL INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE,CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, MACHINE MIXING, LAYING, CURING, FINISHING, ALL OTHER INCIDENTAL, OPERATIONAL, LABOUR CHARGES BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. BED BLOCKS IN FIRST FLOOR (APSS NO: 402).

CEMENT CONCRETE (1:4:8) PROP. USING 40MM GRANITE METAL WITH CONCRETE MIXER INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, CENTERING Lifting ( Mannual) LAYING, ,CURING, FINISHING, [EXCLUDING SEIGNIORAGE CHARGES] ALL OTHER INCIDENTAL, OPERATIONAL, LABOUR ETC., COMPLETE FOR DUMMY COLUMNS FOR FINISHED ITEM OF WORK.(APSS NO: 402). -FIRST FLOOR

SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, SHUTTERING, VIBRATING, CURING ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR FOOTINGS (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380Kgs FOR M-25 GRADE CONCRETE)

SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, SHUTTERING, VIBRATING, CURING ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR PEDASTAL (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380Kgs FOR M-25 GRADE CONCRETE)

SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, SHUTTERING, VIBRATING, CURING ETC., COMPLETE BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR PLINTH BEAM (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380Kgs FOR M-25 GRADE CONCRETE)

SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, SHUTTERING, VIBRATING, CURING ETC., COMPLETE WITH UNSUPPORTED HT OF 3.66M HEIGHT,BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR GROUND FLOOR COLUMNS (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380Kgs FOR M-25 GRADE CONCRETE)

SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, SHUTTERING, VIBRATING, CURING ETC., BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR FIRST FLOOR COLUMNS (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380Kgs FOR M-25 GRADE CONCRETE)

SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, SHUTTERING, VIBRATING, CURING ETC., BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR SECOND FLOOR COLUMNS (HEAD ROOM) (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380Kgs FOR M-25 GRADE CONCRETE)

SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, SHUTTERING, VIBRATING, CURING ETC., COMPLETE WITH UNSUPPORTED HT OF 3.66M HEIGHT,BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR GROUND FLOOR BEAMS (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380Kgs FOR M-25 GRADE CONCRETE)

SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, SHUTTERING, VIBRATING, CURING ETC.,BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR FIRST FLOOR ROOF BEAMS (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380Kgs FOR M-25 GRADE CONCRETE)

SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, SHUTTERING, VIBRATING, CURING ETC.,BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR SECOND FLOOR ROOF BEAMS (HEAD ROOM) (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380Kgs FOR M-25 GRADE CONCRETE)

SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, SHUTTERING, VIBRATING, CURING ETC., COMPLETE WITH UNSUPPORTED HT OF 3.66M HEIGHT,BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR GROUND FLOOR SLABS 125 MM THICK (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380Kgs FOR M-25 GRADE CONCRETE)

SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, SHUTTERING, VIBRATING, CURING ETC., COMPLETE WITH UNSUPPORTED HT OF 3.66M HEIGHT,BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR FIRST FLOOR SLABS 125 MM THICK (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380Kgs FOR M-25 GRADE CONCRETE)

SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, SHUTTERING, VIBRATING, CURING ETC., COMPLETE WITH UNSUPPORTED HT OF 3.66M HEIGHT,BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR SECOND FLOOR SLABS 125 MM THICK (HEAD ROOM) (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380Kgs FOR M-25 GRADE CONCRETE)

SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, SHUTTERING, VIBRATING, CURING ETC., COMPLETE WITH UNSUPPORTED HT OF 3.66M HEIGHT,BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR GROUND FLOOR SLABS 200MM THICK . (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380Kgs FOR M-25 GRADE CONCRETE)

SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, SHUTTERING, VIBRATING, CURING ETC., COMPLETE WITH UNSUPPORTED HT OF 3.66M HEIGHT,BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR FIRST FLOOR SLABS 200MM THICK . (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380Kgs FOR M-25 GRADE CONCRETE)

SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, SHUTTERING, VIBRATING, CURING ETC., COMPLETE ,BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR GROUND FLOOR LINTELS (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380Kgs FOR M-25 GRADE CONCRETE)

SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, SHUTTERING, VIBRATING, CURING ETC., COMPLETE ,BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR FIRST FLOOR LINTELS (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380Kgs FOR M-25 GRADE CONCRETE)

SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, SHUTTERING, VIBRATING, CURING ETC., COMPLETE ,BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR FOR SUNSHADES OF 50MM (2") AVERAGE THICK INCLUDING DRIP COURSE OF SIZE 40MM WIDE X 20MM HEIGHT IN CEMENT MORTAR (1:4)PROP - GROUND FLOOR (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380Kgs FOR M-25 GRADE CONCRETE)

SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, SHUTTERING, VIBRATING, CURING ETC., COMPLETE ,BUT EXCLUDING SEIGNIORAGE CHARGES, COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR FOR SUNSHADES OF 50MM (2") AVERAGE THICK INCLUDING DRIP COURSE OF SIZE 40MM WIDE X 20MM HEIGHT IN CEMENT MORTAR (1:4)PROP - FIRST FLOOR (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380Kgs FOR M-25 GRADE CONCRETE)

MAIN DOOR OF SIZE 1.50X 2.10M (DOUBLE SHUTTERS) SUPPLY AND FIXING OF 35 MM THICK FLUSH DOOR SHUTTER, SOLID BOND WOOD BLOCK BOARD TYPE WITH TEAK VENEER ON ONE FACE AND COMMERCIAL PLY ON OTHER FACE INCLUDING SUPPLY, POSITIONING AND FIXING DOOR FRAME MADE WITH MEDIUM TEAK WOOD SCANTLINGS OF SIZE 150 MM X 100 MM, INCLUDING 6 NOS. OF MS HOLD FASTS OF SIZE 230X40X3 MM, 8 NOS. OF 125 MM BUTT HINGES, 2NO. HEAVY DUTY DOOR STOPERS, 3NOS. 150 MM LONG DOOR HANDLES, 2 NO. ALDROP OF SIZE 300 MM LONG ,3 NOS. OF 250 MM LONG TOWER BOLTS WITH BOLTS, NUTS, NF SCREWS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES FOR MAKING THE FRAME AND SHUTTER AND FIXING ETC., INCLUDING MINOR EXTRA FIXTURES REQUIRED IF ANY AS DIRECTED BY THE ENGINEER-IN-CHRGE OF THE WORK COMPLETE FOR FINISHED ITEM OF WORK. (ALL FITTINGS AND FIXTURES SHOULD BE OF ALLUMINUM, ISI MARK, GOT APPROVED BY THE ENGINEER-IN-CHARGE) (APSSNO:1001&1002).

INTERNAL DOOR OF SIZE 1.06X 2.10M (SINGLE SHUTTER): SUPPLY AND FIXING OF 35 MM THICK FLUSH DOOR SHUTTER, SOLID BOND WOOD BLOCK BOARD TYPE WITH TEAK VENEER ON ONE FACE AND COMMERCIAL PLY ON OTHER FACE INCLUDING SUPPLY, POSITIONING AND FIXING DOOR FRAME MADE WITH MEDIUM TEAK WOOD SCANTLINGS OF SIZE 100 MM X 75MM, INCLUDING 6 NOS. OF MS HOLD FASTS OF SIZE 230X40X3MM, 4 NOS. OF 125 BUTT HINGES, 1 NO. DOOR STOPER, 2 NOS. 150 MM LONG DOOR HANDLES, 1 NO. ALDROP OF SIZE 300 MM LONG, 1 NO. ALDROP OF SIZE 250 MM LONG,2 NOS. OF 250 MM LONG TOWER BOLTS WITH BOLTS, NUTS, NF SCREWS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES FOR MAKING THE FRAME AND SHUTTER AND FIXING ETC., INCLUDING MINOR EXTRA FIXTURES REQUIRED IF ANY AS DIRECTED BY THE ENGINEER-IN-CHRGE OF THE WORK COMPLETE FOR FINISHED ITEM OF WORK. (ALL FITTINGS AND FIXTURES SHOULD BE OF ALLUMINUM, ISI MARK, GOT APPROVED BY THE ENGINEER-IN-CHARGE) (APSSNO:1001&1002).

TOILET DOOR: 0.83X2.10 M: SUPPLYING POSITIONING AND FIXING WPC SOLID DOOR SHUTTER OF 28MM THICK OF ECHON OR EQUIVALENT MAKE INCLUDING WPC DOOR FRAME MADE WITH WPS SCANTLINGS OF SIZE 100MM X 63 MM OF MAKE FUTURE PLY / WOOD PLUS / LIFE TIME , INCLUDING 6 NOS OF 'Z' HOLD FASTS OF SIZE 230 X 40 X 3MM , 4 NOS OF 100 MM BUTT HINGES, 2 NOS. 125MM LONG DOOR HANDLES, 1 NOS ALDROP OF SIZE 250 MM LONG, 2 NOS. of 200MM LONG TOWER BOLTS, WITH BOLTS, NUTS, NF SCREWS, INCLUDIMG CAST AND CONVEYANCE OF ALL MAERIALS TO SITE, LABOUR CHARES FOR MAKIN THE FRAMES, SHUTTER, MINOR EXTRA FIXTURES REQUIRED IF ANY AS DIRECTED BY THE ENGINEER-IN-CHARG OF THE WORK COMPLETE FOR FINISHED ITEM OF WORK (ALL FITTINGS AND FIXTURES SHOULD BE OF ALUMINIUM, ISI MARK, GOT APPROVED BY THE ENGINEER-IN-CHARGE). (APSS NO: 1001 &1002)

PROVIDING AND FIXING FACTORY MADE UPVC WHITE COLOUR SLIDING GLAZED WINDOWUPTO 1.50 M IN HEIGHT DIMENSION ,THREE TRACK THREE PANELS SLIDING WINDOW WITH FLY PROOF SS WIRE MESH (TWO NOS. GLAZED & ONE NO. WIRE MESH PANELS) MADE OF (SMALL SERIES) FRAME 92 X 44 MM & SASH 32 X 60 MMBOTH HAVING WALL THICKNESS OF 1.9 ± 0.2 MM AND SINGLE GLAZING BEAD OF APPROPRIATE DIMENSION (AREA OF WINDOW UPTO 1.75 SQM).COMPRISINGOF UPVC MULTI-CHAMBEREDFRAME WITH IN-BUILT ROLLER TRACK AND SASH EXTRUDED PROFILES DULY REINFORCEDWITH 1.60 ± 0.2 MM THICK GALVANIZED MILD STEEL SECTION MADE FROM ROLLFORMING PROCESS OF REQUIRED LENGTH (SHAPE & SIZE ACCORDING TO UPVC PROFILE), APPROPRIATE DIMENSION OF UPVC EXTRUDED GLAZING BEADS AND UPVC EXTRUDED INTERLOCKS, EPDM GASKET, WOOL PILE, ZINC ALLOY (WHITEPOWDER COATED) TOUCH LOCKS WITH HOOK, ZINC ALLOY BODY WITH SINGLE NYLONROLLERS (WEIGHT BEARING CAPACITY TO BE 40 KG), G.I FASTENERS 100 X 8 MMSIZE FOR FIXING FRAME TO FINISHED WALL AND NECESSARY STAINLESS STEEL SCREWSETC. PROFILE OF FRAME & SASH SHALL BE MITRED CUT AND FUSION WELDED AT ALLCORNERS, INCLUDING DRILLING OF HOLES FOR FIXING HARDWARE'S AND DRAINAGE OFWATER ETC. AFTER FIXING FRAME THE GAP BETWEEN FRAME AND ADJACENT INISHEDWALL SHALL BE FILLED WITH WEATHER PROOF SILICON SEALENT OVER BACKER ROD OFREQUIRED SIZE AND OF APPROVED QUALITY, ALL COMPLETE AS PER APPROVED DRAWING& DIRECTION OF ENGINEER-IN-CHARGE INCLUSIVE OF COST OF SINGLE / DOUBLE GLASS PANES, WIRE MESH AND SILICON SEALENT . NOTE: FOR UPVC FRAME AND SASH EXTRUDED PROFILES MINUS 5% TOLERANCEIN DIMENSION I.E. IN DEPTH & WIDTH OF PROFILE SHALL BE ACCEPTABLE.VARIATION IN PROFILE DIMENSION IN HIGHER SIDE SHALL BE ACCEPTED. BUT NO EXTRA PAYMENT ON THIS ACCOUNT SHALL BE MADE.

PROVIDING AND FIXING FACTORY MADE UPVC WHITE COLOUR FIXED GLAZED WINDOWS / VENTILATORS COMPRISING OF UPVC MULTI CHAMBERED FRAME ANDMULLION (WHERE EVER REQUIRED) EXTRUDED PROFILES DULY REINFORCED WITH 1.60± 0.2 MM THICK GALVANIZED MILD STEEL SECTION MADE FROM ROLL FORMING PROCESS OF REQUIRED LENGTH (SHAPE & SIZE ACCORDING TO UPVCPROFILE),UPVC EXTRUDED GLAZING BEADS OF APPROPRIATE DIMENSION, EPDM GASKET,G.I FASTENERS 100 X 8 MM SIZE FOR FIXING FRAME TO FINISHED WALL, PLASTICPACKERS, PLASTIC CAPS AND NECESSARY STAINLESS STEEL SCREWS ETC. PROFILEOF FRAME SHALL BE MITRED CUT AND FUSION WELDED AT ALL CORNERS, MULLION (IFREQUIRED) SHALL BE ALSO FUSION WELDED INCLUDING DRILLING OF HOLES FOR FIXINGHARDWARE'S AND DRAINAGE OF WATER ETC. AFTERFIXING FRAME THE GAP BETWEENFRAME AND ADJACENT FINISHED WALL SHALL BE FILLED WITH WEATHER PROOF SILICONSEALANT OVER BACKER ROD OF REQUIRED SIZE AND OF APPROVED QUALITY, ALLCOMPLETE AS PER APPROVED DRAWING & DIRECTION OF ENGINEER-IN-CHARGE INCLUSIVE OF COST OF SINGLE / DOUBLE GLASS PANES AND SILICON SEALANT.FIXED WINDOWS / VENTILATORS MADE OF (SMALL SERIES) FRAME 47 X 50MM & MULLION 47 X 68 MM BOTH HAVING WALL THICKNESS OF 1.9 ±0.2 MM AND SINGLE GLAZING BEAD OF APPROPRIATE DIMENSION

ORNAMENTAL PLASTERING TO CEILING 12MM THICK WITH A BASE COAT OF 8 MM THICK IN CM (1:5) PROP. AND FINISH COAT OF 4MM THICK IN CM (1:3) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, CURING, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. GROUND FLOOR (APSS NO: 901 & 904)

ORNAMENTAL PLASTERING TO CEILING 12MM THICK WITH A BASE COAT OF 8 MM THICK IN CM (1:5) PROP. AND FINISH COAT OF 4MM THICK IN CM (1:3) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, CURING, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. FIRST FLOOR (APSS NO: 901 & 904)

ORNAMENTAL PLASTERING TO CEILING 12MM THICK WITH A BASE COAT OF 8 MM THICK IN CM (1:5) PROP. AND FINISH COAT OF 4MM THICK IN CM (1:3) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, CURING, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. SECOND FLOOR(HEAD ROOM) (APSS NO: 901 & 904)

PROVIDING IMPERVIOUS COAT TO EXPOSED RCC ROOF SLAB SURFACE WITH CM(1:3), 20MM THICK WITH 1KG OF WATER PROOF COMPOUND PER BAG OF CEMENT LAID OVER ROOF WHEN IT IS GREEN INCLUDING COST OF ALL MATERIALS, EXCLUDING SEIGNIORAGE CHARGES, EXCLUDING CONVEYANCE CHARGES OF MATERIALS AND INCLUDING ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES FOR MIXING MORTAR, LAYING, RENDERING SMOOTH AND THREAD LINING, CURING, ROUNDING OFF JUNCTIONS OF WALL AND SLAB ETC,, COMPLETE FOR FINISHED ITEM OF WORK FIRST FLOOR

PLASTERING TO SUPERSTRUCTURE 12 MM THICK IN TWO COATS, WITH A BASE COAT OF 8 MM THICK IN CM (1:6) PROP. AND TOP COAT OF 4 MM THICK IN CM (1:4) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING MAKING GROOVES, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, CURING, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE.FOR FINISHED ITEM OF WORK. -GROUND FLOOR BASEMENT (APSS NO: 901&904)

PLASTERING TO SUPERSTRUCTURE 12 MM THICK IN TWO COATS, WITH A BASE COAT OF 8 MM THICK IN CM (1:6) PROP. AND TOP COAT OF 4 MM THICK IN CM (1:4) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING MAKING GROOVES, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, CURING, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE.FOR FINISHED ITEM OF WORK FOR INTERNAL WALLS - GROUND FLOOR (APSS NO: 901&904)

PLASTERING TO SUPERSTRUCTURE 12 MM THICK IN TWO COATS, WITH A BASE COAT OF 8 MM THICK IN CM (1:6) PROP. AND TOP COAT OF 4 MM THICK IN CM (1:4) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING MAKING GROOVES, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, CURING, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE.FOR FINISHED ITEM OF WORK FOR INTERNAL WALLS - FIRST FLOOR (APSS NO: 901&904)

PLASTERING TO SUPERSTRUCTURE 12 MM THICK IN TWO COATS, WITH A BASE COAT OF 8 MM THICK IN CM (1:6) PROP. AND TOP COAT OF 4 MM THICK IN CM (1:4) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING MAKING GROOVES, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, CURING, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE.FOR FINISHED ITEM OF WORK FOR INTERNAL WALLS - SECOND FLOOR (HEAD ROOM) (APSS NO: 901&904)

PLASTERING TO SUPERSTRUCTURE 12 MM THICK IN TWO COATS, WITH A BASE COAT OF 8 MM THICK IN CM (1:6) PROP. AND TOP COAT OF 4 MM THICK IN CM (1:4) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING MAKING GROOVES, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, CURING, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE.FOR FINISHED ITEM OF WORK FOR EXTERNAL WALLS. -GROUND FLOOR (APSS NO: 901&904)

PLASTERING TO SUPERSTRUCTURE 12 MM THICK IN TWO COATS, WITH A BASE COAT OF 8 MM THICK IN CM (1:6) PROP. AND TOP COAT OF 4 MM THICK IN CM (1:4) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING MAKING GROOVES, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, CURING, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE.FOR FINISHED ITEM OF WORK EXTERNAL WALLS -FIRST FLOOR (APSS NO: 901&904)

PLASTERING TO SUPERSTRUCTURE 12 MM THICK IN TWO COATS, WITH A BASE COAT OF 8 MM THICK IN CM (1:6) PROP. AND TOP COAT OF 4 MM THICK IN CM (1:4) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING MAKING GROOVES, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, CURING, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE.FOR FINISHED ITEM OF WORK EXTERNAL WALLS -SECOND FLOOR(HEAD ROOM),PARAPETTE (APSS NO: 901&904)

PROVIDING DADOOING TO INTERNAL WALLS WITH DIGITAL / POLISHED GLAZED FULL BODY PORCELAIN WALL TILES OF SIZE 300 X 600 MM WITH ANY TYPE OF DESIGN TEXTURE SUCH AS MARBLE FINISH, WOODEN, BAMBOO, STONE FINISHES ETC., SCRATCH LESS, STAIN FREE AND THICKNESS BETWEEN 6 - 8 MM 1ST QUALITY CONFORMING TO IS:13711, IS:13712, IS:13630 (PARTS 1 TO 15) OF ANY COLOUR AND FINISH IN ALL SHADES AND DESIGNS, SET OVER BASE COAT OF CM (1:3) 12 MM THICK WITH CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD AT THE RATE OF 3.30 KGS PER SQM AND JOINTED WITH WHITE CEMENT PASTE MIXED WITH PIGMENT OF MATCHING SHADE TO FULL DEPTH, INCLUDING COST OF ALL MATERIALS LIKE TILES, CEMENT, SAND AND WATER ETC., COMPLETE INCLUDING SEIGNIORAGE CHARGES, ETC., COMPLETE FOR FINISHED ITEM OF WORK, EXCLUDING SEIGNIORAGE CHARGES, ETC., COMPLETE FOR FINISHED ITEM OF WORK, - GROUND FLOOR

PROVIDING DADOOING TO INTERNAL WALLS WITH DIGITAL / POLISHED GLAZED FULL BODY PORCELAIN WALL TILES OF SIZE 300 X 600 MM WITH ANY TYPE OF DESIGN TEXTURE SUCH AS MARBLE FINISH, WOODEN, BAMBOO, STONE FINISHES ETC., SCRATCH LESS, STAIN FREE AND THICKNESS BETWEEN 6 - 8 MM 1ST QUALITY CONFORMING TO IS:13711, IS:13712, IS:13630 (PARTS 1 TO 15) OF ANY COLOUR AND FINISH IN ALL SHADES AND DESIGNS, SET OVER BASE COAT OF CM (1:3) 12 MM THICK WITH CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD AT THE RATE OF 3.30 KGS PER SQM AND JOINTED WITH WHITE CEMENT PASTE MIXED WITH PIGMENT OF MATCHING SHADE TO FULL DEPTH, INCLUDING COST OF ALL MATERIALS LIKE TILES, CEMENT, SAND AND WATER ETC., COMPLETE INCLUDING SEIGNIORAGE CHARGES, ETC., COMPLETE FOR FINISHED ITEM OF WORK, EXCLUDING SEIGNIORAGE CHARGES, ETC., COMPLETE FOR FINISHED ITEM OF WORK, - FIRST FLOOR

FLOORING WITH NON-SKID RED OR WHITE FULL BODY CERAMIC FLOOR TILES OF SIZE 450 MM X 450 MM AND THICKNESS BETWEEN 7-8 MM AND 1ST QUALITY CONFORMING TO IS:13711, IS:13712, IS:13630 (PARTS 1 TO 15) OF ANY COLOUR AND FINISH IN ALL SHADES AND DESIGNS, SET OVER BASE COAT OF CEMENT MORTAR (1:8), 12 MM THICK OVER CC BED ALREADY LAID OR RCC ROOF SLAB, INCLUDING NEAT CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD @ 3.3.KGS PER SQM & JOINTED NEATLY WITH WHITE CEMENT PASTE TO FULL DEPTH MIXED WITH PIGMENT OF MATCHING SHADE, INCLUDING COST OF ALL MATERIALS LIKE CEMENT, SAND WATER AND TILES ETC., COMPLETE FOR FINISHED ITEM OF WORK. FOR GROUND FLOOR TOILETS. (EXCLUDING SEIGNIORAGE CHARGES)

FLOORING WITH NON-SKID RED OR WHITE FULL BODY CERAMIC FLOOR TILES OF SIZE 450 MM X 450 MM AND THICKNESS BETWEEN 7-8 MM AND 1ST QUALITY CONFORMING TO IS:13711, IS:13712, IS:13630 (PARTS 1 TO 15) OF ANY COLOUR AND FINISH IN ALL SHADES AND DESIGNS, SET OVER BASE COAT OF CEMENT MORTAR (1:8), 12 MM THICK OVER CC BED ALREADY LAID OR RCC ROOF SLAB, INCLUDING NEAT CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD @ 3.3.KGS PER SQM & JOINTED NEATLY WITH WHITE CEMENT PASTE TO FULL DEPTH MIXED WITH PIGMENT OF MATCHING SHADE, INCLUDING COST OF ALL MATERIALS LIKE CEMENT, SAND WATER AND TILES ETC., COMPLETE FOR FINISHED ITEM OF WORK. FOR FIRST FLOOR TOILETS. (EXCLUDING SEIGNIORAGE CHARGES)

FLOORING WITH DOUBLE CHARGED / MULTI CHARGED STAIN FREE FULL BODY PORCELAIN VITRIFIED TILES WITH DOUBLE LAYER PIGMENT OF SIZE 600 X 600 MM AND THICKNESS BETWEEN 8-10 MM 1ST QUALITY CONFORMING TO IS:13711, IS:13712, IS:13630 (PARTS 1 TO 15) OF ANY COLOUR AND FINISH IN ALL SHADES AND DESIGNS, SET OVER BASE COAT OF CEMENT MORTAR (1:8), 12 MM THICK OVER CC BED ALREADY LAID OR RCC ROOF SLAB, INCLUDING NEAT CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD @ 3.3.KGS PER SQM & JOINTED NEATLY WITH WHITE CEMENT PASTE TO FULL DEPTH MIXED WITH PIGMENT OF MATCHING SHADE, INCLUDING COST OF ALL MATERIALS LIKE CEMENT, SAND WATER AND TILES ETC., BUT EXCLUDING SEIGNIORAGE CHARGES, ETC., COMPLETE FOR FINISHED ITEM OF WORK-GROUND FLOOR

FLOORING WITH DOUBLE CHARGED / MULTI CHARGED STAIN FREE FULL BODY PORCELAIN VITRIFIED TILES WITH DOUBLE LAYER PIGMENT OF SIZE 600 X 600 MM AND THICKNESS BETWEEN 8-10 MM 1ST QUALITY CONFORMING TO IS:13711, IS:13712, IS:13630 (PARTS 1 TO 15) OF ANY COLOUR AND FINISH IN ALL SHADES AND DESIGNS, SET OVER BASE COAT OF CEMENT MORTAR (1:8), 12 MM THICK OVER CC BED ALREADY LAID OR RCC ROOF SLAB, INCLUDING NEAT CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD @ 3.3.KGS PER SQM & JOINTED NEATLY WITH WHITE CEMENT PASTE TO FULL DEPTH MIXED WITH PIGMENT OF MATCHING SHADE, INCLUDING COST OF ALL MATERIALS LIKE CEMENT, SAND WATER AND TILES ETC., BUT EXCLUDING SEIGNIORAGE CHARGES, ETC., COMPLETE FOR FINISHED ITEM OF WORK-FIRST FLOOR

PROVIDING SKIRTING TO INTERNAL WALLS / RISERS OF STEPS DOUBLE CHARGED / MULTI CHARGED STAIN FREE FULL BODY PORCELAIN VITRIFIED TILES WITH DOUBLE LAYER PIGMENT OF SIZE 600 X 600 MM AND THICKNESS BETWEEN 8-10 MM 1ST QUALITY CONFORMING TO IS:13711, IS:13712, IS:13630 (PARTS 1 TO 15) OF ANY COLOUR AND FINISH IN ALL SHADES AND DESIGNS LENGTH EQUAL TO FLOORING STONES, SET OVER BASE COAT OF CM (1:5) 12 MM THICK WITH CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD AT THE RATE OF 3.30 KGS PER SQM AND JOINTED WITH WHITE CEMENT PASTE MIXED WITH PIGMENT OF MATCHING SHADE TO FULL DEPTH, INCLUDING COST OF ALL MATERIALS LIKE TILES, CEMENT, SAND AND WATER ETC., EXCLUDING SEIGNIORAGE CHARGES, ETC., COMPLETE FOR FINISHED ITEM OF WORK GROUND FLOOR.

PROVIDING SKIRTING TO INTERNAL WALLS / RISERS OF STEPS DOUBLE CHARGED / MULTI CHARGED STAIN FREE FULL BODY PORCELAIN VITRIFIED TILES WITH DOUBLE LAYER PIGMENT OF SIZE 600 X 600 MM AND THICKNESS BETWEEN 8-10 MM 1ST QUALITY CONFORMING TO IS:13711, IS:13712, IS:13630 (PARTS 1 TO 15) OF ANY COLOUR AND FINISH IN ALL SHADES AND DESIGNS LENGTH EQUAL TO FLOORING STONES, SET OVER BASE COAT OF CM (1:5) 12 MM THICK WITH CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD AT THE RATE OF 3.30 KGS PER SQM AND JOINTED WITH WHITE CEMENT PASTE MIXED WITH PIGMENT OF MATCHING SHADE TO FULL DEPTH, INCLUDING COST OF ALL MATERIALS LIKE TILES, CEMENT, SAND AND WATER ETC., EXCLUDING SEIGNIORAGE CHARGES, ETC., COMPLETE FOR FINISHED ITEM OF WORK FIRST FLOOR.

FLOORING WITH HIGH POLISHED GRANITE 18 MM THICK SLABS TELEPHONIC BLACK SET OVER BASE COAT OF CEMENT MORTAR (1:8), 20 MM THICK OVER CC BED ALREADY LAID OR RCC ROOF SLAB, INCLUDING NEAT CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD @ 3.3.KGS PER SQM & JOINTED NEATLY WITH WHITE CEMENT PASTE MIXED WITH PIGMENT OF MATCHING SHADE TO FULL DEPTH, INCLUDING COST OF ALL MATERIALS LIKE CEMENT, SAND WATER AND TILESETC., COMPLETE, EXCLUIDING SEIGNIORAGE CHARGES, LABOUR CHARGES FOR DRESSING OF TILESETC., COMPLETE FOR FINISHED ITEM OF WORK, BUT EXCLUDING THE COST OF CONVEYANCE OF ALL MATERIALS-FOR GROUND FLOOR.

FLOORING WITH HIGH POLISHED GRANITE 18 MM THICK SLABS TELEPHONIC BLACK SET OVER BASE COAT OF CEMENT MORTAR (1:8), 20 MM THICK OVER CC BED ALREADY LAID OR RCC ROOF SLAB, INCLUDING NEAT CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD @ 3.3.KGS PER SQM & JOINTED NEATLY WITH WHITE CEMENT PASTE MIXED WITH PIGMENT OF MATCHING SHADE TO FULL DEPTH, INCLUDING COST OF ALL MATERIALS LIKE CEMENT, SAND WATER AND TILESETC., COMPLETE, EXCLUIDING SEIGNIORAGE CHARGES, LABOUR CHARGES FOR DRESSING OF TILESETC., COMPLETE FOR FINISHED ITEM OF WORK, BUT EXCLUDING THE COST OF CONVEYANCE OF ALL MATERIALS-FOR FIRST FLOOR.

PROVIDING SKIRTING TO INTERNAL WALLS /RISERS OF STEPS WITH HIGH POLISHED GRANITE SLABS 16 TO 18 MM THICK UP TO 8'-00 (2.43 M) TELEPHONIC BLACK , SET OVER BASE COAT OF CM (1:3) 12 MM THICK WITH CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD AT THE RATE OF 3.30 KGS PER SQM AND JOINTED WITH WHITE CEMENT PASTE MIXED WITH PIGMENT OF MATCHING SHADE TO FULL DEPTH, INCLUDING COST OF ALL MATERIALS LIKE POLISHED GRANITE STONE, CEMENT, SAND AND WATER LIFTING (MANNUAL), ETC., COMPLETE EXCLUIDING SEIGNIORAGE CHARGES, ETC., COMPLETE FOR FINISHED ITEM OF WORK.-FOR GROUND FLOOR

PROVIDING SKIRTING TO INTERNAL WALLS /RISERS OF STEPS WITH HIGH POLISHED GRANITE SLABS 16 TO 18 MM THICK UP TO 8'-00 (2.43 M) TELEPHONIC BLACK, SET OVER BASE COAT OF CM (1:3) 12 MM THICK WITH CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD AT THE RATE OF 3.30 KGS PER SQM AND JOINTED WITH WHITE CEMENT PASTE MIXED WITH PIGMENT OF MATCHING SHADE TO FULL DEPTH, INCLUDING COST OF ALL MATERIALS LIKE POLISHED GRANITE STONE, CEMENT, SAND AND WATER LIFTING (MANNUAL), ETC., COMPLETE EXCLUIDING SEIGNIORAGE CHARGES, ETC., COMPLETE FOR FINISHED ITEM OF WORK.-FOR FIRST FLOOR

HALF ROUNDING THE EDGES OF GRANITE SLAB AS DIRECTED BY THE ENGINEER-IN-CHARGE, INCLUDING POLISHING, ALL LABOUR CHARGES, HIRE CHARGES OF TOOLS AND PLANTS, INCIDENTAL & OPERATIONAL CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. IN ALL FLOORS

PROVIDING AND APPLYING SYNTHETIC PLASTER PUTTY OR EQUIVALENT PUTTY SUCH AS BIRLA WALL CARE PUTTY OF AVERAGE 1 TO 2 MM THICK OVER PLASTERED SURFACE TO PREPARE THE SURFACE EVEN AND SMOOTH AFTER THOROUGHLY BRUSHING THE SURFACE TO REMOVE ALL DIRT AND REMAINS OF LOOSE POWDERED MATERIALS, APPLYING EMERY PAPER, SAND THE SURFACE, CLEAN & WIPE OFF LOOSE DUST, APPLYING, KNIFING PASTE FILLER BY PUTTY KNIFE / MUSLIN PAD, AIR DRY FOR 2-3 HRS., SAND WITH 180 AND 320 NO. EMERY PAPER FOR THE SURFACE PREPARATION INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK FOR INTERNAL WALLS.FOR ALL FLOORS

PAINTING TO NEW WALLS WITH 2 COATS OF PLASTIC EMULSION PAINT OF APPROVED BRAND AND SHADE OVER A BASE COAT OF APPROPRIATE PRIMER OF APPROVED BRAND, MAKING 3 COATS IN ALL TO GIVE AN EVEN SHADE AFTER THOURUGHLY BRUSHING THE SURFACE TO REMOVE ALL DIRT AND REMAINS OF LOOSE POWDERED MATERIALS, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO WORK SITE AND ALL OPERATIONAL, INCIDENTAL, LABOUR CHARGES ETC. COMPLETE FOR FINISHED ITEM OF WORK AS PER SS 911 FOR INTERNAL WALLS

PAINTING TO EXTERIOR FACES OF WALLS WITH EMULSION PAINT OF APPROVED MAKE (ACE FROM ASIAN PAINT) AND COLOUR 2 COATS BY DILUTING 1LIT OF EMULSION PAINT WITH A MAXIMUM 750 ML OF WATER WITHIN AN INTERVAL OF NOT LESS THAN 6 HOURS BETWEEN TWO COATS OVER 1 COAT OF ASIAN EXTERIOR WALL PRIMER BY DILUTING 1LIT. OF PRIMER WITH 1LIT. OF WATER (TOTAL 3 COATS) WITH SURFACE PREPARATION ETC., AS PER STANDARD SPECIFICATION INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, BRUSHES, ALL INCIDENTAL, OPERATIONAL & LABOUR CHARGES, CURING, SCAFFOLDING ETC., COMPLETE FOR FINISHED ITEM OF WORK. ALL FLOORS (APSS NO:908)

PROVIDING AND APPLYING SYNTHETIC PLASTER PUTTY OR EQUIVALENT PUTTY SUCH AS BIRLA WALL CARE PUTTY OR TEXTURE PAINT OR EQUIVALENT SUCH AS NCL / SAICOAT TEXTURE PAINT OF AVERAGE 2 TO 3 MM THICK OVER PLASTERED SURFACE TO PREPARE THE SURFACE EVEN AND SMOOTH AFTER THOROUGHLY BRUSHING THE SURFACE TO REMOVE ALL DIRT AND REMAINS OF LOOSE POWDERED MATERIALS, APPLYING EMERY PAPER, SAND THE SURFACE, CLEAN & WIPE OFF LOOSE DUST, APPLYING, PUTTY / TEXTURE PAINT FILLER BY PUTTY KNIFE / MUSLIN PAD, AIR DRY FOR 2-3 HRS., FOR THE SURFACE PREPARATION INCLUDING ACESS SCAFFOLDING, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK- FOR EXTERNAL WALLS GROUND FLOOR

PROVIDING AND APPLYING SYNTHETIC PLASTER PUTTY OR EQUIVALENT PUTTY SUCH AS BIRLA WALL CARE PUTTY OR TEXTURE PAINT OR EQUIVALENT SUCH AS NCL / SAICOAT TEXTURE PAINT OF AVERAGE 2 TO 3 MM THICK OVER PLASTERED SURFACE TO PREPARE THE SURFACE EVEN AND SMOOTH AFTER THOROUGHLY BRUSHING THE SURFACE TO REMOVE ALL DIRT AND REMAINS OF LOOSE POWDERED MATERIALS, APPLYING EMERY PAPER, SAND THE SURFACE, CLEAN & WIPE OFF LOOSE DUST, APPLYING, PUTTY / TEXTURE PAINT FILLER BY PUTTY KNIFE / MUSLIN PAD, AIR DRY FOR 2-3 HRS., FOR THE SURFACE PREPARATION INCLUDING ACESS SCAFFOLDING, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK- FOR EXTERNAL WALLS FIRST FLOOR

PROVIDING AND APPLYING SYNTHETIC PLASTER PUTTY OR EQUIVALENT PUTTY SUCH AS BIRLA WALL CARE PUTTY OR TEXTURE PAINT OR EQUIVALENT SUCH AS NCL / SAICOAT TEXTURE PAINT OF AVERAGE 2 TO 3 MM THICK OVER PLASTERED SURFACE TO PREPARE THE SURFACE EVEN AND SMOOTH AFTER THOROUGHLY BRUSHING THE SURFACE TO REMOVE ALL DIRT AND REMAINS OF LOOSE POWDERED MATERIALS, APPLYING EMERY PAPER, SAND THE SURFACE, CLEAN & WIPE OFF LOOSE DUST, APPLYING, PUTTY / TEXTURE PAINT FILLER BY PUTTY KNIFE / MUSLIN PAD, AIR DRY FOR 2-3 HRS., FOR THE SURFACE PREPARATION INCLUDING ACESS SCAFFOLDING, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK- FOR EXTERNAL WALLS SECOND FLOOR

PAINTING TO NEW WOOD WORK TWO COATS WITH SYNTHETIC ENAMEL PAINT OF APPROVED BRAND AND SHADE OVER ONE COAT OF WOOD PRIMER COAT (TOTAL 3 COATS) INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL INCIDENTAL, OPERATIONAL & LABOUR CHARGES FOR PREPARING AND CLEANING THE SURFACE OF DIRT WITH SOAP AND BRUSHES, INCLUDING PUTTY, ETC., COMPLETE FOR FINISHED ITEM OF WORK. (APSS NO.1201, 1207, 1212).

PAINTING TO NEW IRON WORK TWO COATS WITH SYNTHETIC ENAMEL PAINT OF APPROVED BRAND AND SHADE OVER ONE COAT OF RED OXIDE PRIMER COAT (TOTAL 3 COATS) INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL INCIDENTAL, OPERATIONAL & LABOUR CHARGES FOR PREPARING AND CLEANING THE SURFACE OF DIRT WITH SOAP AND BRUSHES, INCLUDING PUTTY, ETC., COMPLETE FOR FINISHED ITEM OF WORK. (APSS NO.1201, 1207, 1212).

VARNISHING TO TEAK VENEERED FACE OF DOORS TWO COATS WITH SYNTHETIC CLEAR VARNISH OF APPROVED BRAND INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL INCIDENTAL, OPERATIONAL & LABOUR CHARGES FOR PREPARING AND CLEANING THE SURFACE OF DIRT WITH SOAP AND BRUSHES, INCLUDING PUTTY, ETC., COMPLETE FOR FINISHED ITEM OF WORK. (APSS NO.1201, 1207, 1212).

PROVIDING "HYSD" STEEL BARS OF DIFFERENT DIAMETERS BELOW 36MM DIAMETER (Fe - 500 GRADE AS PER IS 1786 - 1979)FOR REINFORCEMENT INCLUDING CUTTING, BENDING TO REQUIRED SIZES AND SHAPES, PLACING THEM IN POSITION WITH COVER BLOCKS OF APPROVED SHAPE AND SIZE, TYING FIRMLY WITH M.S BINDING WIRE OF SWG, FORMING GRILLS FOR REINFORCEMENT WORKS AS PER APPROVED DESIGNS AND DRAWINGS TO BE SUPPLIED AT THE TIME OF EXECUTION OF WORK INCLUDING COST AND CONVEYANCE OF DEFORMED BARS, BINDING WIRE, COVER BLOCKS AND ALL WASTAGES SUCH AS OVER LAPS, COUPLINGS, WELDED JOINTS, CHAIRS, SPACE BARS ETC., AS DIRECTED BY THE ENGINEER-IN-CHARGE AND ALL OPERATIONAL, INCIDENTAL LABOUR CHARGES SUCH AS CUTTING, BENDING, PLACING IN POSITION, TYING ETC., COMPLETE FOR FINISHED ITEM OF WORK FOR ALL LENGTHS AS PER DRAWINGS AND TECHNICAL SPECIFICATIONS FOR BARS BELOW 36MM DIA WHERE THEY ARE NOT WELDED.

SUPPLY AND FIXING MS GRILLS TO WINDOWS / VENTILATORS OF ALL SIZES INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES FOR FABRICATION & FIXING AS DIRECTED BY THE ENGINEER-IN-CHARGE ETC., COMPLETE FOR FINISHED ITEM OF WORK. M.S SQUARE BARS OF ALL SIZES:

SUPPLY AND FIXING MS GRILLS TO WINDOWS / VENTILATORS OF ALL SIZES INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES FOR FABRICATION & FIXING AS DIRECTED BY THE ENGINEER-IN-CHARGE ETC., COMPLETE FOR FINISHED ITEM OF WORK. M.S FLATS OF ALL SIZES:

Supply and Fixing Gyp Board Suspended regular single layer false ceiling (GS-MFSC-4.1 as per India Gypsum) using 12.50 mm thick Gyp Board conforming to IS 2095-1982 fixing to Gyp steel GI perimeter channels of size 20 x 27 x 30 mm (web) of 0.55 mm thick along the perimeter of ceiling screw fixed to brick work / partition at 610 mm c/c and suspending the frame work using Intermediate channels (45 x 15 x 15 x 0.90 mm) from soffit at 1220 mm c/c with ceiling angle (25 x 10 x 0.55 mm) fixed with GI Cleat and steel expansion fasteners & connecting clip to the ceiling channels (with knurled web of 51.50 x 26 x 10.50 x 0.55 mm) fixed in diection perpendicular to the intermediate channel at 457 mm c/c and fixing the 12.50 mm drywall scews at 230 mm c/c & jointing, fixing using joint compound and paper tape to have a flush look including filling the tappered & square edges with jointing compound, two coats of drywall topcoat complete for finished item of work as per India Gypsum Ltd., Specification.

SUPPLY AND FIXING OF STAINLESS STEEL RAILING USING STAINLESS STEEL TUBES, SECTIONS, PLATES, SHEETS, PIPES OF ALL SIZES & DIAMETERS OF 304 GRADE, INCLUDING FABRICATION AS PER APPROVED DESIGN USING STAINLESS STEEL WELDING RODS, BUFFING, POLISHING, LACQUER FINISHING, TO PRESENT SEAMLESS FINISH, ALL OTHER INCIDENTAL, OPERATIONAL CHRGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.

SUPPLYING AND LAYING RAIN WATER DOWN TAKE PIPES WITH 110 MM DIA PVC / SWR PIPES OF APPROVED MAKE OF 4 Kg/cm2 CONFIRMING TO IS:13592-1992, WITH NECESSARY UPVC PIPE CLIPS @ 5' INTERVALS AND JOINTED WITH SOLVENT CEMENT INCLUDING CUTTING OF WALLS AND FLOORS AND MAKING THE SAME GOOD, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.

SUPPLY AND LAYING OF ASHIRVAD / AJAY / ASTRAL FLOW GUARD OR EQUIVALENT CPVC PIPES AND FITTINGS TO MEET THE REQUIREMENT OF ASTM-D 2846 AND ARE PRODUCED IN CTS (COPPER TUBE SIZES 1/2" TO 2") ASHIRWAD FLOWGUARD SDR 13.5 PIPES ARE MADE FROM IDENTICAL CPVC COMPOUNDS HAVING THE SAME PHYSICAL PROPERTIES FOR HOT AND COLD WATER (IS 15778-2007) - 22.20 MM OD PIPES SDR 13.5

SUPPLY AND LAYING OF ASHIRVAD / AJAY / ASTRAL FLOW GUARD OR EQUIVALENT CPVC PIPES AND FITTINGS TO MEET THE REQUIREMENT OF ASTM-D 2846 AND ARE PRODUCED IN CTS (COPPER TUBE SIZES 1/2" TO 2") ASHIRWAD FLOWGUARD SDR 13.5 PIPES ARE MADE FROM IDENTICAL CPVC COMPOUNDS HAVING THE SAME PHYSICAL PROPERTIES FOR HOT AND COLD WATER (IS 15778-2007) - 28.60 MM OD PIPES SDR 13.5

SUPPLYING AND FIXING 15 MM DIA BIB TAP WITH FLANGE CHROMIUM PLATED JAQUAR MAKE QUEEN SERIES INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.

SUPPLYING AND FIXING BIBCOCK CUM HEALTH FAUCET WITH 1 M LONG TUBE AND WALL HOOK OF JAQUAR MAKE QUEEN SERIES WITH 7YEARS WARRANTY CHROME PLATED INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.

SUPPLY & FIXING PILLAR COCK JAQUAR MAKE QUEEN SERIES WITH 7 YEARS WARRANTY: CHROME PLATED INCLUDING COST AND CONVEYANCE OF ALL MAERIALS, INCIDENTAL & OPERATIONAL CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.

SUPPLY & FIXING ANGULAR STOP COCKS WITH WALL FLANGE JAQUAR MAKE QUEEN SERIES WITH 7 YEARS WARRANTY: CHROME PLATED INCLUDING COST AND CONVEYANCE OF ALL MAERIALS, INCIDENTAL & OPERATIONAL CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.

SUPPLYING AND FIXING 76.2 MM (3") DIA UV RESISTANT UPVC SWR NAHANI TRAP WITH JALI OF APPROVED ISI BRAND INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.

BOXING OF NAHANI TRAPS IN RCC FLOORS, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC.,COMPLETE FOR FINISHED ITEM OF WORK.

SUPPLYING, LAYING, JOINTING AND TESTING OF SINGLE SOCKET 110 MM DIA PVC / SWR PIPES OF APPROVED MAKE OF 4 Kg/cm2 CONFIRMING TO IS:13592-1992, AND LABOUR CHARGES FOR LAYING, FIXING, AND COMMISSIONING THE PVC PIPES INCLUDING COUPLERS/ BENDS/TEES ETC., INCLUDING FIXING NECCESSARY FITTINGS LIKE BENDS PLUGS, COUPLERS, JUNCTIONS, TEES ETC., WITH SOLVENT JOINTING AS PER STANDARDS INCLUDING EXCAVATION OF TRENCHES AND SOCKET PITS IN ANY SOIL (EXCEPT ROCK REQUIRING BLASTING) UP TO 0.91M DEPTH AND REFILLING WITH EXCAVATED SOILS, WATERING, TAMPING, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.

SUPPLYING AND LAYING 110 MM DIA SINGLE SOCKET PVC / SWR PIPES OF APPROVED MAKE OF 4 Kg/cm2 CONFIRMING TO IS:13592-1992, WITH NECESSARY UPVC PIPE CLIPS @ 5' INTERVALS AND JOINTED WITH SOLVENT CEMENT INCLUDING CUTTING OF WALLS AND FLOORS AND MAKING THE SAME GOOD, AND LABOUR CHARGES FOR LAYING, FIXING, AND COMMISSIONING THE PVC PIPES INCLUDING COUPLERS/ BENDS/TEES ETC., INCLUDING FIXING NECCESSARY FITTINGS LIKE BENDS PLUGS, COUPLERS, JUNCTIONS, TEES ETC., WITH SOLVENT JOINTING AS PER STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.

SUPPLYING AND LAYING 75 MM DIA SINGLE SOCKET PVC / SWR PIPES OF APPROVED MAKE OF 4 Kg/cm2 CONFIRMING TO IS:13592-1992, WITH NECESSARY UPVC PIPE CLIPS @ 5' INTERVALS AND LABOUR CHARGES FOR LAYING, FIXING, AND COMMISSIONING THE PVC PIPES INCLUDING COUPLERS/ BENDS/TEES ETC., INCLUDING FIXING NECCESSARY FITTINGS LIKE BENDS, PLUGS, COUPLERS, JUNCTIONS, TEES ETC., WITH SOLVENT JOINTING AS PER STANDARDS INCLUDING CUTTING OF WALLS AND FLOORS AND MAKING THE SAME GOOD, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.

SUPPLYING AND FIXING OF 150MMX100MM SWG GULLY TRAP CONFIRMING TO ISI 651 & 4127 WITH CI GRATING AND CONSTRUCTION OF BRICK MASONRY INTERMEDIATE CHAMBER OF SIZE 20"X14"X12" IN CM (1:6) OVER CC (1:5:10) PROP. BED OF SIZE 20"X14"X4" AND PLASTERING WITH 12MM THICK IN CM (1:4) PROP. BOTH INSIDE AND OUTSIDE SURFACES AND FITTED WITH 9"X12" (230X305MM) RCC (1:2:4) 1 1/2" THICK COVER INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., FOR FINISHED ITEM OF WORK COMPLETE.

CONSTRUCTING 457.20 X 457.20 MM (1'-6" X 1'-6") BRICK MASONARY INSPECTION CHAMBER WITH CM (1:6) PROP. USING 2ND CLASS CLAY BRICKS OF 225MM THICK , AND FITTED WITH 457.2 X 457.2 MM (1'-6" X 1'-6") RCC COVER UP TO A DEPTH OF 914.4 MM (3'-0") AND LAYING CEMENT CONCRETE (1:4:8) 150 MM THICK USING 40 MM HBG METAL AND PCC (1:2:4) BENCHING AND CHANNEL 100 MM THICK AS PER STANDARD SPECIFICATION FOR FINISHED ITEM OF WORK.

SUPPLYING AND FIXING INDIAN MAKE FLAT BACK WHITE GLAZED WASH HAND BASIN (HSW/PARRYWARE/NEYCER) IST QUALITY CONFIRMING TO IS: 2556-PART-4 :1972 OF SIZE 550 X 400MM SINGLE C.P. PILLAR COCK AS APPROVED BY EXECUTIVE ENGINEER WITH WASTE FITTINGS LIKE RUBBER PLUG, CHAIN, 32MM NOMINAL SIZE C.P. FITTING WITH PARALLEL PIPE THREAD CONFIRMING TO IS : 2963-1979 AND FITTED WITH 15MM NOMINAL BORE CHROMIUM PLATED PILLAR TAP OF 1ST QUALITY INDIAN MAKE 400GRAMS SEICO/SENIOR/NICE/ESSO OR EQUIVALENT COMPLETE WITH STANDARD CI BRACKETS, AND PAINTING TO ALL IRON FITTINGS WITH 2 COATS OF SYNTHETIC ENAMEL PAINT OF APPROVED COLOUR AND MAKE INCLUDING CUTTING THE WALLS WHEREVER NECESSARY AND MAKING THE SAME GOOD FOR FINISHED ITEM OF WORK. INCLUDING WOODEN BLOCK INCLUDING CUTTING THE WALLS WHEREVER NECESSARY AND MAKING THE SAME GOOD FOR FINISHED ITEM OF WORK

SUPPLY, INSTALLATION AND COMMISSIONING APPROVED MAKE FLOOR MOUNTED CLOSE COUPLED EWC SUIT CASCADE MODEL 'P' OR 'S' TRAP WITH DUAL FLUSH PORCELAIN CISTERN FIXED ON EWC WITH ALL INTERNAL PARTS OF DUAL FLUSH CISTERN, ULTRA SOLID SEAT COVER OF APPROVED MAKE WITH RUBBER BUFFER AND CAP 15 MM ANGLE STOP COCK 450 MM LONG PVC INTER CONNECTION PIPE WALL FLANGES ALL OF APPROVED MAKE ETC.COMPLETE FOR FINISHED ITEM OF WORK IN ALL RESPECTS: WHITE COLOUR

SUPPLY AND FIXING WHITE GLAZED FLAT BACK HALF STALL URINALS OF 1 ST QUALITY CONFORMING TO IS2556-1995 WITH STANDARD CP SPREADER OF OVERALL SIZE 95X95X57 MM CONFORMING TO IS 2556-PART 6 ,SEC-6-1974 FIXED WITH SCREWS COMPLETRE INDIAN MAKE OF SIZE 590 X375 X390 MM INCLUDING 12.70 MM PVC CONNECTION WITH BRASS UNION NUTS C.P COATED, 38.10 MM C.P WASTE COUPLING, 38.10 MM PVC SOLID WASTE PIPE OUTLET, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE.

SUPPLY & FIXING SOAP DISH JAQUAR MAKE QUEEN SERIES: WITH 7 YEARS WARRANTY: CHROME PLATED INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.

SUPPLY & FIXING OF TOWEL RAIL JAQUAR MAKE QUEEN SERIES WITH 7 YEARS WARRANTY: CHROME PLATED INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.

SUPPLY & FIXING OF TUMBLER HOLDER JAQUAR MAKE CONTINENTAL SERIES, CHROME FINISH WITH 7 YEARS WARRANTY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.

SUPPLY & FIXING OF TOILET PAPER HOLDER JAQUAR MAKE QUEEN SERIES. WITH 7 YEARS WARRANTY: CHROME PLATED INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.

SUPPLYING AND FIXING 110 MM DIA UV RESISTANT UPVC SWR PLAIN BEND 87.5 DEGREES AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.

SUPPLYING AND FIXING 75 MM DIA UV RESISTANT UPVC SWR PLAIN BEND 87.5 DEGREES AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.

SUPPLYING AND FIXING 75 MM DIA UV RESISTANT UPVC SWR DOOR BEND 87.5 DEGREES AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.

SUPPLYING AND FIXING 110 MM DIA UV RESISTANT UPVC SWR DOOR BEND 87.5 DEGREES AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.

SUPPLYING AND FIXING 110 MM DIA UV RESISTANT UPVC SWR COWL AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.

SUPPLYING AND FIXING 75 MM DIA UV RESISTANT UPVC SWR COWL AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.

SUPPLYING AND FIXING 110 MM DIA UV RESISTANT UPVC SWR SINGLE 'T' WITH DOOR AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.

SUPPLYING AND FIXING 75 MM DIA UV RESISTANT UPVC SWR SINGLE 'T' WITH DOOR AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.

SUPPLYING AND FIXING BEST INDIAN MAKE 609.6X457.2mm T.V SHAPE MIRROR WITH PLASTIC FRAME MIRROR INCLUDING WOODEN BLOCKS, SCREWS ETC., INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., FOR FINISHED ITEM OF WORK COMPLETE.

SUPPLYING AND FIXING 110 MM DIA UV RESISTANT UPVC SWR SINGLE 'Y' WITH DOOR AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.

SUPPLYING AND FIXING 75 MM DIA UV RESISTANT UPVC SWR SINGLE 'Y' WITH DOOR AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.

SUPPLYING AND FIXING GM GATE (PEET) VALVES - 25 MM NB SIZE INDIAN MAKE HEAVY DUTY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE AND LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK

SUPPLYING AND FIXING 32 MM DIA PPR BALL VALVE CONFIRMING TO DIN STANDARDS 8077/8092, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.

SUPPLYING AND FIXING 25 MM DIA PPR BALL VALVE CONFIRMING TO DIN STANDARDS 8077/8092, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.

BOXING OF W.C TRAPS IN RCC FLOORS, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC.,COMPLETE FOR FINISHED ITEM OF WORK.

SUPPLY & FIXING OF TOWEL RING JAQUAR MAKE QUEEN SERIES WITH 7 YEARS WARRANTY: CHROME PLATED

SUPPLY AND LAYING OF ASHIRVAD / AJAY / ASTRAL FLOW GUARD OR EQUIVALENT CPVC PIPES AND FITTINGS TO MEET THE REQUIREMENT OF ASTM-D 2846 AND ARE PRODUCED IN CTS (COPPER TUBE SIZES 1/2" TO 2") ASHIRWAD FLOWGUARD SDR 13.5 PIPES ARE MADE FROM IDENTICAL CPVC COMPOUNDS HAVING THE SAME PHYSICAL PROPERTIES FOR HOT AND COLD WATER (IS 15778-2007) - 28.60 MM OD PIPES SDR 13.5

SUPPLY AND LAYING OF ASHIRVAD / AJAY / ASTRAL FLOW GUARD OR EQUIVALENT CPVC PIPES AND FITTINGS TO MEET THE REQUIREMENT OF ASTM-D 2846 AND ARE PRODUCED IN CTS (COPPER TUBE SIZES 1/2" TO 2") ASHIRWAD FLOWGUARD SDR 13.5 PIPES ARE MADE FROM IDENTICAL CPVC COMPOUNDS HAVING THE SAME PHYSICAL PROPERTIES FOR HOT AND COLD WATER (IS 15778-2007) - 34.90 MM OD PIPES SDR 13.5

SUPPLYING AND FIXING 40MM NB SIZE GM GATE(PEET) VALVE AS PER IS - 778, CLASS-I, INDIAN MAKE HEAVY TYPE, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.

SUPPLYING AND FIXING 25MM NB SIZE GM GATE(PEET) VALVE AS PER IS - 778, CLASS-I, INDIAN MAKE HEAVY TYPE, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.

PROVIDING AND PLACING ON TERRACE POLYTHELENE WATER STORAGE TANKS (AT ALL FLOOR LEVELS) DOUBLE LAYER APPROVED BRAND AND MNUFACTURE WITH COVER AND SUITABLE LOCKING ARRANGEMENTS MAKING NECESSARY HOLES FOR INLET & OUTLETS AND OVERFLOW PIPES BUT WITHOUT FITTINGS & BASE SUPPORT FOR TANKS, MAKING GOOD THE SAME TO ENSURE LEAK PROOF WITH AN APPROPRIATE MASONARY PLATFORM INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC.,COMPLETE FOR FINISHED ITEM OF WORK AS DIRECTED BY THE ENGINEER -IN- CHARGE.

SUPPLYING, LAYING, JOINTING AND TESTING OF SINGLE SOCKET 110 MM DIA PVC / SWR PIPES OF APPROVED MAKE OF 4Kg/cm2 CONFIRMING TO IS:13592-1992, AND LABOUR CHARGES FOR LAYING, FIXING, AND COMMISSIONING THE PVC PIPES INCLUDING COUPLERS/ BENDS/TEES ETC., INCLUDING FIXING NECCESSARY FITTINGS LIKE BENDS PLUGS, COUPLERS, JUNCTIONS, TEES ETC., WITH SOLVENT JOINTING AS PER STANDARDS INCLUDING EXCAVATION OF TRENCHES AND SOCKET PITS IN ANY SOIL (EXCEPT ROCK REQUIRING BLASTING) UP TO 0.91M DEPTH AND REFILLING WITH EXCAVATED SOILS, WATERING, TAMPING, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.

SUPPLYING, LAYING, JOINTING AND TESTING OF SINGLE SOCKET 160 MM DIA PVC / SWR PIPES OF APPROVED MAKE OF 6Kg/cm2 CONFIRMING TO IS:13592-1992, AND LABOUR CHARGES FOR LAYING, FIXING, AND COMMISSIONING THE PVC PIPES INCLUDING COUPLERS/ BENDS/TEES ETC., INCLUDING FIXING NECCESSARY FITTINGS LIKE BENDS PLUGS, COUPLERS, JUNCTIONS, TEES ETC., WITH SOLVENT JOINTING AS PER STANDARDS INCLUDING EXCAVATION OF TRENCHES AND SOCKET PITS IN ANY SOIL (EXCEPT ROCK REQUIRING BLASTING) UP TO 0.91M DEPTH AND REFILLING WITH EXCAVATED SOILS, WATERING, TAMPING, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.

CONSTRUCTING 914.40 MM ( 3'-0") DIA FLY ASH BRICK MASONARY MAN HOLE AS PER IS-4111:PART-1:1996 WITH CM (1:6) PROP. USING FLY ASH BRICKS OF 225MM THICK FROM APPROVED SOURCE HAVING A MINIMUM CRUSHING STRENGTH OF 5N/SQ.MM INCLUDING PLASTERING WIH CM(1:3) PROP. 12 MM THICK BOTH INSIDE AND OUTSIDE, FITTED WITH 20'' DIA RCC COVERS AND FRAMES, INCLUDING EXCAVATING PITS UP TO A DEPTH OF 914.4 MM (3'-0") IN ALL SORTS OF SOILS (EXCLUDING ROCK) AND LAYING CEMENT CONCRETE (1:4:8) 150 MM THICK USING 40 MM HBG METAL AND PCC (1:2:4) BENCHING AND CHANNEL 100 MM THICK AS PER STANDARD SPECIFICATION AND INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, COST OF SEIGNIORAGE CHARGES ON ALL MATERIALS AND ALL INCIDENTAL AND OPERATIONAL, LABOUR CHARGES LIKE MIXING CEMENT MORTAR, CONSTRUCTING MASONRY, CURING ETC., COMPLETE FOR FINISHED ITEM OF WORK AS PER STANDARD SPECIFICATION.

SUPPLYING AND LAYING 110 MM DIA SINGLE SOCKET PVC / SWR PIPES OF APPROVED MAKE OF 4 Kg/cm2 CONFIRMING TO IS:13592-1992, WITH NECESSARY UPVC PIPE CLIPS @ 5' INTERVALS AND JOINTED WITH SOLVENT CEMENT INCLUDING CUTTING OF WALLS AND FLOORS AND MAKING THE SAME GOOD, AND LABOUR CHARGES FOR LAYING, FIXING, AND COMMISSIONING THE PVC PIPES INCLUDING COUPLERS/ BENDS/TEES ETC., INCLUDING FIXING NECCESSARY FITTINGS LIKE BENDS PLUGS, COUPLERS, JUNCTIONS, TEES ETC., WITH SOLVENT JOINTING AS PER STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.

SUPPLYING AND FIXING 110 MM DIA UV RESISTANT UPVC SWR COWL AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.

SUPPLYING AND FIXING 110 MM DIA UV RESISTANT UPVC SWR SINGLE 'T' WITH DOOR AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.

CONSTRUCTION OF SLUDGE PITS (FOR TWIN PIT FLUSH TOILET SYSTEM) USING LOCALLY AVAILABLE RCM PRECAST WELL STEINING RINGS 6 NOS. 1.2M DIA AND 30 CM HEIGHT TO FORM ABOUT 1.5M DEEP SLUDGE PIT USING 30mm THICK SHAHABAD / CUDDAPAH TILE SPACERS IN BETWEEN RINGS INCLUDING EARTH WORK EXCAVATIONS IN ALL SOILS EXCEPT ROCK REQUIRING BLASTING COST AND CONVEYANCE OF RCM RINGS TO SITE, LAYING THEM IN GROUND OVER PCC ANGULAR BED OF (1:6:10) 230mmX100mm THICK FOR CIRCULAR RING PORTION INCLUDING COST AND CONVEYANCE OF ALL MATERIALS AND LABOUR CHARGES AND SEALING THE TOP OF PIT WITH RCM PRECAST COVER 50mm THICK 1.2M DIA INCLUDING FIXING CHARGES WITH CM (1:3) LEAK PROOF AND ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES SUCH AS REFILLING SIDE WITH EXCAVATED EARTH ETC., AS DIRECTED BY THE ENGINEER-IN-CHARGE FOR FINISHED ITEM OF WORK.

Supply and Fixing of 25mm outer dia heavy (2.20mm thickness) grade with IS:9537 part 3 FRLS regid PVC pipe (ISI MARK) concealed in wall with all required accessories including masonary work for light, fan and separate plug point including cost of suitable size of modular metal box of the same make of switch including all labour charges etc., complete. Makes : Precision/Universal& Marudhar/VIP / Sudhakar.

Supply and Fixing of 25mm outer dia heavy (2.20mm thickness) heavy grade with IS:9537 part 3 FRLS regid PVC pipe of makes concealed in wall with all required accessories including masonary work and labour charges etc., complete. Makes : Precision/Universal& Marudhar/VIP / Sudhakar. (For circuit mains, power sockets and computer boards only)

Supply and Fixing of 25mm outer dia heavy (2.20mm thickness) heavy grade with IS:9537 part 3 FRLS regid PVC pipe of concealed in Roof Slabs with all required accessories including masonary work and labour charges etc., complete. Makes : Precision/Universal& Marudhar/VIP / Sudhakar.

Supply and Fixing of 25mm outer dia heavy (2.20mm thickness) heavy grade with IS:9537 part 3 FRLS regid PVC pipe in under neath the floor with all required accessories including masonary work and labour charges etc., complete.Makes : Precision/Universal& Marudhar/VIP / Sudhakar.

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant low smoke FRLS / HFFR PVC insulated 1100V grade as perIS:694/1990 specification flexible copper cable in existing pipe with 6A one way modular switch with 6 modular cover frame, 3 plate Ceiling rose including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non Residential Buildings. Wire Make: (Finolex/RR kabel/Havells/ FortuneArrt) Ceiling rose: Anchor/ Gold Medal Olive /Million Zoom. Switches & Cover frame Make: Legrand (Myrius/Lyncus) / Schneider (Clipsal X/ Livia AB)/ Crabtree (Murano/ Athena) / Lauritz Knudsen - englaze ( Formerly L&T) / Honeywell (Blenzero)

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant low smoke FRLS / HFFR/ZHFR PVC insulated 1100V grade as perIS:694/1990 specification flexible copper cable in existing pipe with 6A two way modular switch with 6 modular cover frame, 3 plate Ceiling rose including all labour charges etc., complete for staircase light points in Non Residential Buildings. Wire Make: (Finolex/RR kabel/Havells/FortuneArrt) Ceiling rose: Anchor/ Gold Medal Olive /Million Zoom. Switches & Cover frame Make:Legrand (Myrius/Lyncus) / Schneider (Clipsal X/ Livia AB)/ Crabtree (Murano/ Athena) / Lauritz Knudsen - englaze ( Formerly L&T) / Honeywell (Blenzero)

Supply and fixing of 6/10A 3/2 pin modular plug socket with 6/10A one way modular switch control on a common switch board covered with 3 module cover frame including earth con and including wire leads, earth connections along with all labour charges etc., complete. Make: Legrand (Myrius/Lyncus) / Schneider (Clipsal X/ Livia AB)/ Crabtree (Murano/ Athena) / Lauritz Knudsen - englaze ( Formerly L&T) / Honeywell (Blenzero)

Supply and fixing of 6/10A 3/2 pin modular plug socket - 2Nos with 6/10A one way modular switch -2Nos control on a common switch board covered with 6 module cover frame including earth con and including wire leads, earth connections along with all labour charges etc., complete. Switches & Cover Frame Makes: Makes: Legrand (Myrius/Lyncus) / Schneider (Clipsal X/ Livia AB)/ Crabtree (Murano/ Athena) / Lauritz Knudsen - englaze ( Formerly L&T) / Honeywell (Blenzero)

Supply and fixing of 16/20A 1 way modular switch-1 no with 20A modular socket -1no and 6/10AA 3/2 pin modular plug socket - 3 nos with 6A 1 way modular switch - 3 nos with 12 Module box size covered with 12 module cover frame including earth connections and all labour charges etc., complete.(For computer switch board) Switches & Cover Frame Makes: Legrand (Myrius/Lyncus) / Schneider (Clipsal X/ Livia AB)/ Crabtree (Murano/ Athena) / Lauritz Knudsen - englaze ( Formerly L&T) / Honeywell (Blenzero)

Supply and Fixing of 16/20A 2 Modular 1 way Socket with shutter and 16A / 20A 1 Way Modular Switch duly recessed in wall with 4 Modular Box and 3 modular cover frame including earth connections and all labour charges etc., complete. Switches & Cover Frame Makes: Legrand (Myrius/Lyncus) / Schneider (Clipsal X/ Livia AB)/ Crabtree (Murano/ Athena) / Lauritz Knudsen - englaze ( Formerly L&T) / Honeywell (Blenzero)

Supply and run of 1 of 14 /0.3mm (1.0 Sq.mm) FRLS / HFFR / ZHFR PVC insulated 1100V grade as perIS:694/1990 specification for Copper cable in existing pipe for earth continuity including all labour charges etc., complete. Makes: Finolex / RR kabel / Havells /KEI/ Polycab/ Gloster/ Goldmedal/GM (Earth for fan points)

Supply and run of 3 of 36 /0.3mm (2.5 Sq.mm) FRLS / HFFR/ZHFR P.V.C. insulated 1100V grade as perIS:694/1990 specification for insulated flexible copper cable in existing pipe for run of circuits, power plugs & computer boards including all labour charges etc., complete. ( For Phase Neutral and Earth) ( Circuit Mains to Switch Board and for flood lights) Make:Finolex/RR kabel/Havells / FortuneArrt

Supply and run of 3 of 56/0.3mm (4 Sq.mm) FRLS / HFFR/ZHFR P.V.C. insulated 1100V grade as perIS:694/1990 specification for insulated flexible copper cable in existing pipe for run of circuits, power plugs & computer boards including all labour charges etc., complete. ( For Phase Neutral and Earth) ( Circuit Mains to Switch Board and for flood lights) Make:Finolex/RR kabel/Havells / FortuneArrt

Supply and run of 5 of 56/0.3mm (4 Sq.mm) FRLS / HFFR/ZHFR PVC insulated 1100V grade as perIS:694/1990 specification for copper cable in existing pipe for mains inlcuding all labour charges etc., complete.( For Phase Neutral and Earth) [from mains to LDB]. Make:Finolex/RR kabel/Havells / FortuneArrt

Supply and run of 5 of 84/0.3mm (6 Sq.mm) FRLS / HFFR/ZHFR PVC insulated 1100V grade as perIS:694/1990 specification for copper cable in existing pipe for mains inlcuding all labour charges etc., complete.( For Phase Neutral and Earth) [from mains to LDB]. Make:Finolex/RR kabel/Havells / FortuneArrt

Supply and fixing of modular socket type Telephone jack with Connector on 2 modular box and cover frame including giving connections, cost of all accessories and labour charges etc., complete. Make:Legrand (Myrius/Lyncus) / Schneider (Clipsal X/ Livia AB)/ Crabtree (Murano/ Athena) / Lauritz Knudsen - englaze ( Formerly L&T) / Honeywell (Blenzero).

Supply and run of 5 Pair, 0.5mm telephone copper wire of makes Finolex / Delton / Polycab including all labour charges etc., complete.

Supply installation testing and commisioning of1no of Cat6 Tooless builtin crimping mechanism Information Outlet with Dust Cover Exceed ANSI/TIA-568-C.2 and ISO/IEC 11801 standards with 1module face plate for Category 6 component performance & Compatible to T568A,T568B wiring pattern and UL-940V0 Rated Plastic &RoHS Compliant Makes: Systimax / Panduit/ Siemond/ Legrand

Supply and run of LAN Cable cat - 6 UTP cable in existing PVC conduit including cost and conveyance of all materials and labour charges etc., complete. Makes:Systimax / Panduit / Siemond /Legrand

Supply of 48" (1200mm) Sweep 5 Star rated Ceiling Fan, with double ball bearings, air delivery more than 200 cubic meter / min, but without Regulator including cost and conveyance of all materials etc. complete. Makes: Crompton (HS PLus /HS) / Havells (ES PLS /SS390ES) / Orient Energy Star.

Supply and erecting 2 Module Modular type Electronic step type Fan Regulator. complete erected on existing board.Make: Legrand (Myrius/Lyncus) / Schneider (Clipsal X/ Livia AB)/ Crabtree (Murano/ Athena) / Lauritz Knudsen - englaze ( Formerly L&T) / Honeywell (Blenzero)

Labour charges for fixing of ceiling fan and regulator including transportation and giving connections with twin core wire etc., complete.

Supply and fixing of 20-24W, not less than 1100mm length LED batten light with extruded alluminium housing and polycarbonate cover, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, .etc., complete. Makes: Phillips / GE-Venture / Crompton/ Wipro / Jaquar.

Supply and fixing of 18W LED Slim Panel Ropund/ Square for suitable for Recessed / Surface mounting made of diecast alluminium body with powder coating, acrylic diffuser with Driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , operating voltaGE-Venture ranGEVenture of 150 to 265 Volts AC, P.F > 0.9, SurGEVenture protection: 2KV,THD<10%, with high power LED's having efficacy of > 100 lumins/watt,CCT: 3000K - 5700K, minimum CRI>70, .etc., complete. a) LUMINAIRE MAKE : Phillips / GE- Venture / Crompton / Wipro / Bajaj / Havells / Halonix/Jaquar/HPL/GM / GreenLites / Gold Medal/Eveready/ FortuneArrt b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/Everlight.

Supply and fixing of 9W heavy duty LED Down lighter, suitable for Recessed mounting made of pressure diecast alluminium body with powder coating, acrylic diffuser with Driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , operating voltaGE-Venture ranGE-Venture of 150 to 265 Volts AC, P.F > 0.9, SurGE-Venture protection: 2KV, THD<10% with high power LED's having efficacy of > 100 lumins / watt, CCT: 3000K - 5700K, minimum CRI > 70, Luminaire performance complies to IS 10322 (Part 5 / Sec-3) etc., complete a) LUMINAIRE MAKE : Phillips / GE- Venture / Crompton / Wipro / Bajaj / Havells / Halonix/Jaquar/HPL/GM / GreenLites / Gold Medal/Eveready/ FortuneArrt b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/Everlight.

Supply of fresh air exhaust fan of light duty 250V A.C.50Hz../ 300mm size (12") 1350 R.P.M Metallic body plastic blades, wire mesh, etc., complete. Make Crompton/Bajaj Bahar WG/ Havells Ventil Air- DSP/ Orient hill air.

Labour charges for fixing of Exhaust fan in wall with necessary connections and masonary work of making hole, finishing etc., complete.

Supply and fixing Distribution board with 20A single phase plug and Socket, in sheet steel enclosure with 10/16/20A SP MCB including internal connection and labour charges for surface / flush mounting etc., complete. (For AC points) makes Legrand - DX3 / Schneider-Acti9/Indo Asain

Supply and fixing 8 way SPN D.B with board with IP-43 protection suitable for three phase40A DP Isolator/ RCCB / ELCB - 1 No for incomer, 10kA-6-32A SP MCBs - 8Nos for outgoing. including internal connection and labour charges for surface / flush mounting etc., complete.(for LDB for GF & FF) Make: Legrand(Ekinox 3) / Schneider-A9 / Seimens / Lauritz Knudsen ( Formerly L&T)- Newrange. MCB Make: Legrand- DX3/ Scneider - A9/ Siemens - 5SX4 / Lauritz Knudsen ( Formerly L&T)- AU.

Supply and fixing 6 way TPN D.B with board with IP-43 protection suitable for three phase 63A FP MCB - 1 No for incomer, 10kA-6-32A SP MCBs - 18 Nos for outgoing. including internal connection and labour charges for surface / flush mounting etc., complete.(for PDB & LDB for 2nd floor) Make: Legrand(Ekinox 3) / Schneider-A9 / Seimens / Lauritz Knudsen ( Formerly L&T)- Newrange. MCB Make: Legrand- DX3/ Scneider - A9/ Siemens - 5SX4 / Lauritz Knudsen ( Formerly L&T)- AU.

Supply and fixing 8way TPN D.B with board with IP-43 protection suitable for three phase 63A FP MCB - 1 No for incomer, 10kA-6-32A SP MCBs - 24 Nos for outgoing. including internal connection and labour charges for surface / flush mounting etc., complete.(for PDB) Make: Legrand(Ekinox 3) / Schneider-A9 / Seimens / Lauritz Knudsen ( Formerly L&T)- Newrange. MCB Make: Legrand- DX3/ Scneider - A9/ Siemens - 5SX4 / Lauritz Knudsen ( Formerly L&T)- AU.

Supply and transportation of 60 W LED Street light Luminaire made of pressure diecast alluminium body with powder coated, having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's having System efficacy > 100 lm/W and junction temprature < 70°C, with Ingrees protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), Driver surge protection 4KV, external Surge protection 10 KV with optics distribution , THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc., complete. a) LUMINAIRE MAKE : Wipro(Skyline) / Philips (Green line) / GE-Venture / Crompton(Neo Series) / Bajaj (Edge) / Halonix(Lumos - Super) / Havells (Endura Series) /Capart(Premium)/Greenlites(Hi-Lux) /Polycab/Keselec/ HPL(City Vision)/ Jaquar(Premium)/Eveready/ Surya (Pollux) / FortuneArrt (Leaf) b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG.

Supply and transportation of 100W LED Flood light Luminaire made of pressure diecast alluminium housing with powder coated,having protective toughned glass,Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's System efficacy >100lm/W and junction temprature < 70°C, with Ingrees protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), IK05, Driver surge protection 4KV, external Surge protection ≥ 10KV with wide/ Narrow beam optics, THD<10% at 110 Volts AC, driver efficiency >90%, , CCT: 3000K - 5700K, minimum CRI>70, etc., complete. a) LUMINAIRE MAKE : Wipro / Philips/ GE-Venture / Crompton/ Bajaj /Greenlites / Havells/Capart(Premium) /Halonix/ Polycab /Keselec/HPL/Jaquar/Eveready / Surya (Lumasmax / O Flood) / FortuneArrt (Fin) b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG.

Fixing of LED Street / flood luminaire on wall with 3Cx 2.5 Sq.mm flexible copper cable etc.,including all labour charges for mason work and giving connections etc., complete.

Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in C.C.Chamber of 400m x 400m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 25 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)

Supply and Run of 25mm x 6mm G.I Strip including cost of all accessories and labour charges etc., complete.

Supply of 25 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) Makes: Universal / CCI / Unicab/Polycab

Supply and making one end termination with heavy duty single compression brass gland as per BS 6121:2005 ,IP 66 complete, SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of 70 Sqmm Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size.Makes:Dowels/Comet/SMI

Supply and fixing 8 way TPN - Vertical type Distribution board with IP -43 Protection (Metal Door) with 125A, 4Pole 25 kA MCCB as incomer with 8Nos 63A TPMCB, as outgoing including internal connection and labour charges for surface / flush mounting etc., complete. makes Legrand(Ekinox 3) / Schneider-Acti9/Havells/Indo Asain

Supply and errecting of Tripple Pole Sheet metal/iron clad switch approved make rewirable type 415V 100A with conduit entry errected an angle iron frame covered with 3mm thick white hylam sheet cover etc.,complete.including cost and conveyance of all materials and labour charges etc., complete.Makes: HPL / Havells / Standard / Indo Asian/Benlo

Earth work excavation of Trench in hard ground soil, laying of U.G cables from 70 sqmm to 400 Sq,mm on sand cushion covering the cable with bricks and back filling of Trench duly providing route indicator embedded in C.C including cost and conveyance of materials and labour charges etc., complete.