SPECIAL REPAIR/REPLACEMENT OF WASHING EXTRACTOR/DRYING TUMBLER AGAINST BER UNDER GE IMA DEHRADUN

Taking down old unserviceable Industrial Washer Extractor / Drying Tumbler Machine after disconnect the electric connection, water inlet/outlet pipe line etc complete all as required at site and directed by Engineer-in-Charge.

Supply, installation, testing and commissioning of Industrial Washer Extractor Machine fully automatic with loading capacity 30 kg dry weight per change, front loading, open pocket, havy duty, high spin, top suspension, full stainless steel cabinet, powder/liquid detergent compartment, electrically heated, stainless steel inner cylinder, outer drum loading door, front stainless steel, Inner basket having three lifter design, single motor with variable frequency inverter drive for various speeds for wash, distribution low, normal and high spin, Turned suspension for vibration less performance, fully programmable micro processor Control (PLC) for preset processes system, solenoid operated water inlet valve, electrical operated drain valve, operates on 415 volt 3 phase 50 Hz AC supply with following specification. Basket size - 900x500mm, Drive motor-7.5 HP, Frequency Drive-10 HP, Final Extractor-800 rpm, Water Drain-75 mm, Electric load- 12 &18 KW, Material used-Stainless steel grade 304/GRED, easy to use computer simple, efficient inverter drive,massive bearing housing, triple seal, tuned suspension, 5 compartment auto chemical dispenser all as specified and directed. MAKE: A ONE ENGINEERING, OR EQUIVALENT MAKE APPROVED BY THE COMPETENT AUTHORITY.

Supply, installation, testing and commissioning of Industrial Drying Tumbler 30kg electric heated semi automatic heavy duty front loading, open pocket,large dia,die pressed, powder coated door stainless steel inner basket outer body double walled glass wool insulated, centrifugal high suction powerful blower, automatic control panel for auto reverse / forward, auto digital temperature control functions operated on 415 volts 3 phase 50 Hz Ac supply with following specifications. Basket size -950x850 mm, Drive motor-1 HP, Blower motor-1 HP, Main door opening-650 mm, Electric Load-12 & 18 KW, Stainless steel inner cylinder 304/Gred digital temperature controller and display in of or oc all as specified and directed. Volume: 670 Ltr. MAKE: A ONE ENGINEERING WORKS/ SAGUN ENTERPRISES/ STERIFAG/ FABCARE/ IFB

M&L for PCC 1:3:6 type C-1 (using 20 mm graded CRUSHED stone aggregate) as in coping/foundation including necessary form work complete all as specified and directed.

M&L for Cross arms, bracings, supports,clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint complete all as directed.

M&L earthing complete with galvanised steel earth plate 600x600x6mm thick buried directly in ground earth pit not less than 2.25 mtr below normal ground level with top edge of the plate not less than 1.5m deep below normal ground level connected to and including GI strip 32x6mm earth lead by means of nuts, bolts, and washer of galvanised iron, 20mm dia medium grade GI pipe of suitable length as watering pipe with funnel and wire mesh and 40 mm dia GI pipe light grade from earth plate up to test point , including excavation and earth work in any type of soil, PCC pit in PCC (1:2:4) type B1 using 20mm grade stone aggregate steel frame and RCC cover all as shown in electrical plate No 3 of SSR 2009 (Part-I) incl.testing on completion

Supply and fix Wall mounting industrial socket 63 amp cap 5 pin ,3P+N+E 415 volts,AC splash proof IP 67 protection make C&S ABB,Legrand complete all as directed.

Supply and fix Wall mounting industrial plug 63 amp cap 5 pin ,3P+N+E 415 volts,AC splash proof IP 67 protected make C&S, ABB,Legrand complete all as directed.