Providing, Supply And Erecting of LED Street Light Fixture With Pole and 3-Year Replacement Warranty as per various location chart Upleta Town, Dist. Rajkot Under 15(Percentage) Vivekadhin Grant (Year-2026-27)

NAME OF WORK:- SUPPLYING, INSTALLING, TESTING & COMMISSIONING OF LED STREET LIGHT WITH

POLE, AS PER LOCATION CHART, AT. UPLETA

TOTAL AMOUNT PUT TO TENDER

TOTAL AMOUNT PUT TO TENDER

PERCENTAGE RATE TENDER

Sr.No. Schedule Amount

1 Schedule - "B"- 1

2 Schedule - "B"- 2

3 Schedule - "B"- 3

4 Schedule - "B"- 4

Total Amount Rs.

Total Amount Rs.

I/We am/are willing to carry out the work @ ________% Above / Below_____________Percentage (should be writen in

figures and words) of the Estimated rates mentioned above amount of my / our Tender works out as under.

Estimated Amount Estimated Amount

Put to Tender Rs. 42,35,125=00 Put to Tender Rs. 42,35,125=00

Add …………………….% Rs. Deduct …………………….% Rs.

Total Rs. Total Rs.

(In Words (In Words

Stamp with Signature of Contractor Engineer

Upleta Nagarpalika

Chief Officer President

Upleta Nagarpalika Upleta Nagarpalika

UPLETA NAGARPALIKA - UPLETA

SCHEME: 15% VIVEKADHIN GRANT (YEAR-2026-27)

NAME OF WORK :- Supplying, Installing & Commissiong of Street Lights

Location :- Manhar Chowk To Jikariya Masjid, At. Upleta

SCHEDULE - "B-1"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Supplying and erecting approved make Octagonal pole made from HR

sheet steel. The pole should be made as per IS. and shall be coated with

hot dip galvanizing as per IS 2629/2633/4759, suitable suspend local wind

speed with integral Junction box consist of terminal plate of min 6mm Hylam

sheet, standard profile 35mm X 7.5mm Din-Rail for MCB Mounting, stud

type terminal and arrangement for cable termination to be erected With

Suitable foundation (Included) as per details given by manufacturer

considering site requirement.

(E) 7 Mtr. Long 70 mm Top X 135 mm bottom dia, 3 mm thickness with

225mmX225mmX16mm base plate, 4-M20 Bolts and 600mm long with

necessary G.I. J Bolts .Approx Pole weight 67 kg 10.00 12553.29 No.

Supplying and erecting LED street light / Flood light fittings with High power

White LEDs wattage of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED

driver efficiency > 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection.

(ii) 48 - 59 Watts Cat-lll 10.00 5079.29 No.

Providing and erecting street light pole bracket comprising main B Class MS

pipe of 4.2 cm/require outside dia. complete with suitable B Class M.S.

sleeve tubing of approx. 45cms.length and suitable for 76.5 mm / 80mm. /

require size pole top having sufficient fasteners for fixing the brackets and

having spread of 1 mtr. length with suitable rise as per site condition &

suitable welded stiffener reducer and nipple with check nut complete painted

with one coat of Red oxide / PU base primer and two coats of Aluminium /

PU paint. paint with following nos of arms. [A] Single Arm bracket 1 Mtr

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or

in existing trench / pipe at road crossing or floor of following size of

cables. (B) 4 core 16 Sq. mm 692.00 1235.23 Rmt

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv

grade ISI marked copper wires of following size to be erected as directed.

(e) 1.50 Sq.mm 3 core round PVC sheathed 250.00 58.58 Rmt

providing and erecting Miniature circuit breaker single pole 6A to 25A

suitable to operate on 240 V A.C. system and having breaking capacity

KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark

Cat.III 10.00 123.22 No.

Providing and erecting Pipe type earthing having 150 cms.long and 2.5 cms.

dia. galvanised iron pipe with coupling and buch buried in specially prepared

earth pit complete with necessary 8 SWG earth wire. 10.00 368.65 No.

Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG. 10.00 77.77 Kg 777.70

Providing & laying approved make Double walled corrugated pipes (DWC)

of polyethylene(conforming to IS 14930 II )with necessary connecting

accessories of same material at required depth in existing trench for laying

of cable. below ground / road surface for enclosing cable (A) 50 mm outer

dia 692.00 62.62 Rmt

Providing and, fixing heavy duty flange type brass cable gland with rubber

ring for PVC insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables. cable trench excvation

refilling and dressing. 64.00 47.47 Rmt

Supplying & erecting approved make Digital time switch having lithium cell

years operative and operate battery backup 1 channel day clock with

memory programme, suitable to operate on 240V + 5%, 16A with, floating

contacts Minimum switching setup time 1 minimum & LCD display. Also

comprised permanent ON/OFF switching. Programming switches & housed

in fire proof thermoplastic enclosure & transparent cover erected as required

with necessary connection erected as directed. 1.00 3168.37 Each

Supplying & erecting power contactor ,AC3 duty for time switch complete

erected as per direction Cat III (D) 4 pole 440V 40 Amp. 1.00 2782.55 Each

Supplying & erecting IP 55 grade following size section pillar fabricated from

joint less M.S. Sheet with angle iron legs made from jointless M.S. Angle

with cable clamps to be buried in ground to have appropriate erection to

work uniform until erected with cement concrete foundation and 45 cm high

bricks work finishing with plaster etc. hinged double door internally

supported on both side, with internal and outside looking arrangement with

look and keys in duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is

welded and other with nut and bolt for erecting Bakelite sheet. Painting the

Section Pillar inside and out side with three tank powder coated paint.

section pillar roof should be without joint with water leakage proof & tested

as per IP 55 test & followed by IS 2147 of

(A) 150 X 90 X 75 cm section pillar fabricated from 14 Gauge MS Sheet with

angle iron legs 95 cm long made from 40 X 40 X 6 mm thick MS angle. 1.00 16691.26 Each

Solder less crimping type Aluminium lugs conforming to IS suitable for cable

of following size evenly crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut bolts in an approved

manner. (B) 40 Amp 250.00 8.16 No.

Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom

including excavation for the pole of size 60 x 60 x 150 cm. Deep in below

ground level with plinth of 45 cm x 45 cm(or 45 cm dia x 45 cm) high upper

ground level with necessary curing and finishing in approved manner.

( for 9 & 10 mtr pole) (C) 16/25 Sq.mm. 1.00 15.15 Each

Total Amounts Rs.......…

Total Amounts Rs.......…

Stamp with Signature of Contractor Municipal Engineer

Upleta Nagarpalika

Chief Officer President

Upleta Nagarpalika Upleta Nagarpalika

UPLETA NAGARPALIKA - UPLETA

SCHEME: 15% VIVEKADHIN GRANT (YEAR-2026-27)

NAME OF WORK :- Supplying, Installing & Commissiong of Street Lights

Location :- Bus stand chowk to vadla chowk, At. Upleta

SCHEDULE - "B-1"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Supplying and erecting approved make Octagonal pole made from HR

sheet steel. The pole should be made as per IS. and shall be coated with

hot dip galvanizing as per IS 2629/2633/4759, suitable suspend local wind

speed with integral Junction box consist of terminal plate of min 6mm Hylam

sheet, standard profile 35mm X 7.5mm Din-Rail for MCB Mounting, stud

type terminal and arrangement for cable termination to be erected With

Suitable foundation (Included) as per details given by manufacturer

considering site requirement.

(E) 7 Mtr. Long 70 mm Top X 135 mm bottom dia, 3 mm thickness with

225mmX225mmX16mm base plate, 4-M20 Bolts and 600mm long with

necessary G.I. J Bolts .Approx Pole weight 67 kg 10.00 12553.29 No.

Supplying and erecting LED street light / Flood light fittings with High power

White LEDs wattage of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED

driver efficiency > 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection.

(ii) 48 - 59 Watts Cat-lll 10.00 5079.29 No.

Providing and erecting street light pole bracket comprising main B Class MS

pipe of 4.2 cm/require outside dia. complete with suitable B Class M.S.

sleeve tubing of approx. 45cms.length and suitable for 76.5 mm / 80mm. /

require size pole top having sufficient fasteners for fixing the brackets and

having spread of 1 mtr. length with suitable rise as per site condition &

suitable welded stiffener reducer and nipple with check nut complete painted

with one coat of Red oxide / PU base primer and two coats of Aluminium /

PU paint. paint with following nos of arms. [A] Single Arm bracket 1 Mtr

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or

in existing trench / pipe at road crossing or floor of following size of

cables. (B) 4 core 16 Sq. mm 692.00 1235.23 Rmt

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv

grade ISI marked copper wires of following size to be erected as directed.

(e) 1.50 Sq.mm 3 core round PVC sheathed 250.00 58.58 Rmt

providing and erecting Miniature circuit breaker single pole 6A to 25A

suitable to operate on 240 V A.C. system and having breaking capacity

KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark

Cat.III 10.00 123.22 No.

Providing and erecting Pipe type earthing having 150 cms.long and 2.5 cms.

dia. galvanised iron pipe with coupling and buch buried in specially prepared

earth pit complete with necessary 8 SWG earth wire. 10.00 368.65 No.

Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG. 10.00 77.77 Kg 777.70

Providing & laying approved make Double walled corrugated pipes (DWC)

of polyethylene(conforming to IS 14930 II )with necessary connecting

accessories of same material at required depth in existing trench for laying

of cable. below ground / road surface for enclosing cable (A) 50 mm outer

dia 692.00 62.62 Rmt

Providing and, fixing heavy duty flange type brass cable gland with rubber

ring for PVC insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables. cable trench excvation

refilling and dressing. 64.00 47.47 Rmt

Supplying & erecting approved make Digital time switch having lithium cell

years operative and operate battery backup 1 channel day clock with

memory programme, suitable to operate on 240V + 5%, 16A with, floating

contacts Minimum switching setup time 1 minimum & LCD display. Also

comprised permanent ON/OFF switching. Programming switches & housed

in fire proof thermoplastic enclosure & transparent cover erected as required

with necessary connection erected as directed. 1.00 3168.37 Each

Supplying & erecting power contactor ,AC3 duty for time switch complete

erected as per direction Cat III (D) 4 pole 440V 40 Amp. 1.00 2782.55 Each

Supplying & erecting IP 55 grade following size section pillar fabricated from

joint less M.S. Sheet with angle iron legs made from jointless M.S. Angle

with cable clamps to be buried in ground to have appropriate erection to

work uniform until erected with cement concrete foundation and 45 cm high

bricks work finishing with plaster etc. hinged double door internally

supported on both side, with internal and outside looking arrangement with

look and keys in duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is

welded and other with nut and bolt for erecting Bakelite sheet. Painting the

Section Pillar inside and out side with three tank powder coated paint.

section pillar roof should be without joint with water leakage proof & tested

as per IP 55 test & followed by IS 2147 of

(A) 150 X 90 X 75 cm section pillar fabricated from 14 Gauge MS Sheet with

angle iron legs 95 cm long made from 40 X 40 X 6 mm thick MS angle. 1.00 16691.26 Each

Solder less crimping type Aluminium lugs conforming to IS suitable for cable

of following size evenly crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut bolts in an approved

manner. (B) 40 Amp 250.00 8.16 No.

Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom

including excavation for the pole of size 60 x 60 x 150 cm. Deep in below

ground level with plinth of 45 cm x 45 cm(or 45 cm dia x 45 cm) high upper

ground level with necessary curing and finishing in approved manner.

( for 9 & 10 mtr pole) (C) 16/25 Sq.mm. 1.00 15.15 Each

Total Amounts Rs.......…

Total Amounts Rs.......…

Stamp with Signature of Contractor Municipal Engineer

Upleta Nagarpalika

Chief Officer President

Upleta Nagarpalika Upleta Nagarpalika

UPLETA NAGARPALIKA - UPLETA

SCHEME: 15% VIVEKADHIN GRANT (YEAR-2026-27)

NAME OF WORK :- Supplying, Installing & Commissiong of Street Lights

Location :- Vadli chowk To Manhar Chowk, At. Upleta

SCHEDULE - "B-3"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Supplying and erecting approved make Octagonal pole made from HR

sheet steel. The pole should be made as per IS. and shall be coated with

hot dip galvanizing as per IS 2629/2633/4759, suitable suspend local wind

speed with integral Junction box consist of terminal plate of min 6mm Hylam

sheet, standard profile 35mm X 7.5mm Din-Rail for MCB Mounting, stud

type terminal and arrangement for cable termination to be erected With

Suitable foundation (Included) as per details given by manufacturer

considering site requirement.

(E) 7 Mtr. Long 70 mm Top X 135 mm bottom dia, 3 mm thickness with

225mmX225mmX16mm base plate, 4-M20 Bolts and 600mm long with

necessary G.I. J Bolts .Approx Pole weight 67 kg 10.00 12553.29 No.

Supplying and erecting LED street light / Flood light fittings with High power

White LEDs wattage of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED

driver efficiency > 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection.

(ii) 48 - 59 Watts Cat-lll 10.00 5079.29 No.

Providing and erecting street light pole bracket comprising main B Class MS

pipe of 4.2 cm/require outside dia. complete with suitable B Class M.S.

sleeve tubing of approx. 45cms.length and suitable for 76.5 mm / 80mm. /

require size pole top having sufficient fasteners for fixing the brackets and

having spread of 1 mtr. length with suitable rise as per site condition &

suitable welded stiffener reducer and nipple with check nut complete painted

with one coat of Red oxide / PU base primer and two coats of Aluminium /

PU paint. paint with following nos of arms. [A] Single Arm bracket 1 Mtr

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or

in existing trench / pipe at road crossing or floor of following size of

cables. (B) 4 core 16 Sq. mm 692.00 1235.23 Rmt

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv

grade ISI marked copper wires of following size to be erected as directed.

(e) 1.50 Sq.mm 3 core round PVC sheathed 250.00 58.58 Rmt

providing and erecting Miniature circuit breaker single pole 6A to 25A

suitable to operate on 240 V A.C. system and having breaking capacity

KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark

Cat.III 10.00 123.22 No.

Providing and erecting Pipe type earthing having 150 cms.long and 2.5 cms.

dia. galvanised iron pipe with coupling and buch buried in specially prepared

earth pit complete with necessary 8 SWG earth wire. 10.00 368.65 No.

Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG. 10.00 77.77 Kg 777.70

Providing & laying approved make Double walled corrugated pipes (DWC)

of polyethylene(conforming to IS 14930 II )with necessary connecting

accessories of same material at required depth in existing trench for laying

of cable. below ground / road surface for enclosing cable (A) 50 mm outer

dia 692.00 62.62 Rmt

Providing and, fixing heavy duty flange type brass cable gland with rubber

ring for PVC insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables. cable trench excvation

refilling and dressing. 64.00 47.47 Rmt

Supplying & erecting approved make Digital time switch having lithium cell

years operative and operate battery backup 1 channel day clock with

memory programme, suitable to operate on 240V + 5%, 16A with, floating

contacts Minimum switching setup time 1 minimum & LCD display. Also

comprised permanent ON/OFF switching. Programming switches & housed

in fire proof thermoplastic enclosure & transparent cover erected as required

with necessary connection erected as directed. 1.00 3168.37 Each

Supplying & erecting power contactor ,AC3 duty for time switch complete

erected as per direction Cat III (D) 4 pole 440V 40 Amp. 1.00 2782.55 Each

Supplying & erecting IP 55 grade following size section pillar fabricated from

joint less M.S. Sheet with angle iron legs made from jointless M.S. Angle

with cable clamps to be buried in ground to have appropriate erection to

work uniform until erected with cement concrete foundation and 45 cm high

bricks work finishing with plaster etc. hinged double door internally

supported on both side, with internal and outside looking arrangement with

look and keys in duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is

welded and other with nut and bolt for erecting Bakelite sheet. Painting the

Section Pillar inside and out side with three tank powder coated paint.

section pillar roof should be without joint with water leakage proof & tested

as per IP 55 test & followed by IS 2147 of

(A) 150 X 90 X 75 cm section pillar fabricated from 14 Gauge MS Sheet with

angle iron legs 95 cm long made from 40 X 40 X 6 mm thick MS angle. 1.00 16691.26 Each

Solder less crimping type Aluminium lugs conforming to IS suitable for cable

of following size evenly crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut bolts in an approved

manner. (B) 40 Amp 250.00 8.16 No.

Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom

including excavation for the pole of size 60 x 60 x 150 cm. Deep in below

ground level with plinth of 45 cm x 45 cm(or 45 cm dia x 45 cm) high upper

ground level with necessary curing and finishing in approved manner.

( for 9 & 10 mtr pole) (C) 16/25 Sq.mm. 1.00 15.15 Each

Total Amounts Rs.......…

Total Amounts Rs.......…

Stamp with Signature of Contractor Municipal Engineer

Upleta Nagarpalika

Chief Officer President

Upleta Nagarpalika Upleta Nagarpalika

UPLETA NAGARPALIKA - UPLETA

SCHEME: 15% VIVEKADHIN GRANT (YEAR-2026-27)

NAME OF WORK :- PURCHASE OF LED STREET LIGHT, MCB & TIMER FOR STREET LIGHT

LOCATION :- VARIOUS LOCATION OF UPLETA NAGARPALIKA, AT. UPLETA

SCHEDULE - "B-4"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Supplying and erecting LED street light / Flood light fittings with High

power White LEDs wattage of 3 Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High pressure

die cast aluminum housing with smooth finish powder coated and heat sink

extruded aluminium with diffuser and Polycarbonate optics / lenses,

with toughened glass with company mark / name engraved or embossed

160 to 270 V, Power Factor more than 0.95, THD < 10%, CCT 3000K

to 5700K, Uniformity ratio > 0.45, Luminaire efficacy > 100 lumens /

watt. LED driver efficiency > 85%. (fittings required LM-79 & LM-80

certificates) (NOTE: Below description have shown ranges of Wattage

capacity of LED fittings. The Engineer incharge may select any wattage

capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and Light must

have 440VAC line supply with over-voltage protection. 60 to 90 Watts

Cat. III 79.00 7735.00 Each

Providing & erecting 415V MCB Four Pole for Motor & Inductive Load

(C Curve) having 10KA breaking capacity & confirms to IS: 8828 in existing

box having following capacity (C) 63 Amp. Cat. III 79.00 711.04 Each

Supplying & erecting approved make time switch with single pole air

break contacts suitable for 230V. 15/16A. complete with self starting

motor driven clock ‘ON’ & 'OFF’ automatic arrangement at any

predetermined time during each 24 hours, With nickel cadmium

rechargeable battery backup erected as directed. 79.00 2302.80 Each

Total Amounts Rs.......…

Total Amounts Rs.......…

Stamp with Signature of Contractor Municipal Engineer

Upleta Nagarpalika

Chief Officer President

Upleta Nagarpalika Upleta Nagarpalika