Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.2 LAccepted-AOC 253 7 NATIONAL STREET DISTT MANDI 175001 | MANDI | MANDI | HIMACHAL PRADESH | 175001 | ₹1.2 L Quoted ₹1.0 L | L1 | Accepted-AOC L1 |
| 2 | L2₹1.2 L+₹20,633.67 (20.2%)Rejected-Finance | ₹1.2 L+₹20,633.67 (20.2%) | L2 | Rejected-Finance L2 |
| 3 | L3₹1.3 L+₹29,387.35 (28.8%)Rejected-Finance | ₹1.3 L+₹29,387.35 (28.8%) | L3 | Rejected-Finance L3 |
Tender Value
₹1.5 L
EMD Value
₹1,475
Closing Date
10 Aug 2026, 11:00 amClosed
Sr Executive Engineer ED HPSEBL Mandi
Sr. Executive Engineer ED HPSEBL Mandi
Tender for Replacement of damaged portion of Roof for Electrical Sub Division-I Office Building under Electrical Sub Division-I, HPSEBL Mandi.MED/M-I-41/2026-27
2026_HPSEB_140436_1
MED/M-I-41/26-27
Open Tender
Civil Works
Percentage
ED HPSBEL Mandi
Please refer Tender documents.
5 documents required · 5 mandatory
₹590
₹1,475
31 Aug 2026
4 Aug 2026
10 Aug 2026
4 Aug 2026
10 Aug 2026
4 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Civil work | |||||
| 1.01 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of:G.S. Sheet | 1 | Sqm | 61.2 | ₹61.14 |
| 1.02 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | - | Kg | 106.48 | - |
| 1.03 | Providing 0.47mm thick Tata Durashine Roof prepainted steel sheet roofing including vertical / curved surface fixed with 5.5 mm self drilling screws & washers complete in all respects with all accessories (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per the direction of Engineer -in- Charge | 1 | Sqm | 859.74 | ₹858.88 |
| 1.04 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :Ridges plain (500 - 600mm)/Flashings/ Aprons | - | Mtr | 330.59 | - |
| 1.05 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :Barge board (Upto 300 mm) | 1 | Mtr | 294.95 | ₹294.66 |
| 1.06 | Providing and fixing Prepainted steel sheet Ceiling 0.35mm thick with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge. | - | Sqm | 632.2 | - |
| 1.07 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :Gutter (600 mm over all girth) | - | Sqm | 734.29 | - |
| 1.08 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter | - | Rmtr | 228.44 | - |
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.77 MB
41bid.pdf
Tender Documents • 0.66 MB
BOQ_208309.xls
BOQ • 0.24 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .