RD road to Jamuna_Road_WBM Gr III,BUSG,SDBC0.000 to 2.538

Clearing & grubbing road land including uprooting rank vegetation , grass, bushes,shrubs, saplings & trees girth upto 300 mm, removal of stumps of such trees cut earlier & disposal of unserviceable materials by manual means & stacking of serviciable materials to be used or acutioned, upto a lead of 1000 m including removal & disposal of top organic soils not exceeding 150 mm in thickness as per technical specification clause 210 & as per direction of the Engineer-in-Charge.

Scarifying the existing bituminous road surface to a depth of 50mm (By mechanical means) and disposal of scarified materials within all lifts and lead upto 1000 metres etc.complete as per the specification and direction of the Engineer-in-charge

Re-Working of Scarified bituminous Surface suitable after supplementing base materials with sand & compacting fnished surface as per Technical specification & as per Clause-601.8.3.2 of MoSRT&H Specification for road & Bridge Works(Latest Revision)

Providing laying spreading and compacting stone aggregates of specific sizes to water bound macadam specification including sprading in uniform thickness, hand packing rolling with three wheeled steel roller 8-10 tonnes in stages to proper grade and camber applying and brooming requisite type of screening/blind materials to fill up the interstices of coarse aggregate watering and compacting to the required density as per clause 404 of MOSRT & H specification for Road & Bridge works (4th Revision) etc. complete as per direction of the Engineer-incharge.(WBM Grade-III). Stone screened dust.

Providing and applying primer coat with bitumen emulsion on prepared surface of granular base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means as per Clause 502 of MoSRT&H specifications including cost, conveyance, royalty, taxes, labour charges, T&P etc. required for the work complete as per specification and direction of the Engineer-in-Charge.

Providing and applying tack coat using bitumen @0.40 kg per sqm on the prepared granular surface / bitumenous surface cleaning with hydraulic brooms including cost of all materials, labour , T&P etc. complete as per the specification and direction of the Engineer-in-Charge.

Labour for scraping cleaning the road surface applying tack coat using 3.0kg of bitumen for 10 sqm and laying 37.5mm thick built up spray grouting in one layer using 0.45cum of 25mm to 40mm size hard granite metal & 12.00kg penetration grade of bitumen for 10 sqm in each layer with 0.12cum of 12mm size hard granite chips as key stone for 10 sqm spreading over & laying including heating pouring & spreading over & spreading bitumen metal & chips & rolling with PRR including hire & running charges of PRR, tar boiler & all other T&P articles but excluding cost & conveyance of bitumen, metal & chips etc. complete as per the specification and direction of the Engineer-in-Charge.

Providing and laying semi dense graded bituminous concrete with batch type hot mix plant using crushed agreegates of specified grading , premixed with bituminous binder of 60/70 penetration grade of bitumen ,transporting the hot mix to work site,laying with a hydrostatic paver finisher with sensor control to the required grade , level and alignment, rolling with smooth wheeled ,vibratory and tandem rollers to achive the desired compaction as per clause 508 of MoSRT&H specification for the road and bridge works (4th Revision) as per the specification and direction of the Engineer-in-Charge.

Construction of embankment with approved materials obtained from borrow pits with all leads and lifts and transporting to site by mechanical means within a lead of 5 Kms, spreading, grading to required slope & compacting to meet requirement of Tables 300-2 & Clause 305 of MOSRT&H specifications for road & bridge works (4th revision) etc. complete as per direction of the Engineer-in-Charge.