Repairing of EI WORK at Churaman PHC

Amount

S&F 415 V, Horizontal type, TPN MCB DB (4-way) with SS enclosure double-door with IP-42/43 protection, with Four Pole Isolators as incomer and SPMCBs ('C' Curve, 10 KA) as outgoing, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment as per GS. INCOMING-63 A FP Isolator -1 No. OUTGOING-6-32A SPMCB-12 Nos. [Make - Legrand/Siemens/Havells/ABB/L&T]

S&F 250V, SPN MCBDB (2+10) way with SS enclosure double-door (Ivory White with IP-42/43 protection with DP Isolators as incomer and SPMCBs ('C' Curve, 10kA) as outgoing, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment as per GS. INCOMING-40 A DP Isolator OUTGOING-10 Nos. 6-10A SPMCB [Make - Legrand/Siemens/Havells/ABB/L&T]

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR'(Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish Avg run 8 mtr

Do and Do…... (On board )

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required as per GS. [Make-Gloster/Polycab/Havells] 4x10sqmm + 2x6sqmm [Existing panel to 4 way HTPNDB]

Do - Do - Do - 2x6sqmm + 1x4sqmm [HTPNDB to SPNDB]

Do - Do - Do - 2x4sqmm + 1x2.5sqmm [for AC]

Do - Do - Do - 2x2.5sqmm + 1x1.5sqmm [for Power plug, Comp. board]

Do - Do - Do - 3x1.5sqmm

Finising the end of above PVC insulated & unsheathed copper wire as per GS.4x10sqmm + 2x6sqmm

Do - Do - Do - 2x6sqmm + 1x4sqmm

Do - Do - Do - 2x4sqmm + 1x2.5sqmm

Do - Do - Do - 2x2.5sqmm + 1x1.5sqmm

Do - Do - Do - 2x1.5sqmm + 1x1.5sqmm

Supply & Fixing 240 V, 4 nos. 6A, plug socket with separate 4 nos. 6 A Piano key type switch, indicator & 16A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required[Computer Plug].

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required [Sep 16A Plug].

Supply & Fixing 240 V, 2 nos 6A, plug socket with separate 2 nos 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 175 mm x 100 mm x 65 mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), incl. S&F 1no 240 V, 25 A, 3 pin Modular type plug top (Brand approved by EIC) and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire as per GS.

S/F 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. as per GS.

Supply and delivery of Single LED Fitting (20Watt, 230VAC, 50hZ, 4000K NW, THD<10%, bult in 2.5KV SPD) with all accessories and 1 nos LED Tube [Make: Philips TMC 502 P 1xT-LED, Havells, Bajaj, CG, Wipro, Legaro, Halonix, Panasonic or as per EIC]

S&F of 9W LED lamp on exsting angular batten, as directed by EIC. [Make: Philips Havells, Bajaj, CG, Wipro, or as per EIC]

Fixing only single/twin florescent light fitting complete with all accessories directly on wall/ceiling with HW block and suitable size MS fastener.

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length, as per GS.

Supply & delivery of 1200 mm sweep 230 volt AC Ceiling fan incl. Blades, canopy etc. With 18" down rod(14SWG), Fork(10SWG), Heavy type insulator, 3/8th inch bolt with nut, heavy type split pin etc., as directed by EIC [Make-Orient - New Breeze/Summercool or similar spec of Crompton/Usha]

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire, as per GS.

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc., as per GS.

Supply and delivery of 230V 230mm (9") Exhaust fan with all necessary accessories, as directed by EIC. [Make: EPC Heavy Duty(Industrial) , Usha, CG, Bajaj or equiv Make]

Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) for the above Exhaust Fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire & making connection for exhaust fan, as per GS.

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length., as per GS.

Fixing only bulk head ceiling fitting on wall /ceiling by screws etc

Earthing with 50mm dia GI pipe (ISI-M) 3.64mm thick x 3.04 Mts. long and 1x4 SWG GI (Hot Dip) wire (4 Mts. long), 13mm dia x 80mm long GI bolts, double nuts, double washers incl. S&F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under-ground level and partly above-ground level driven to an average depth of 3.65 Mts. below the ground, as per GS.

Excavation of soil for installation of Earth Electrode and filling & ramming, for Soft Soil, as per GS.

S&F earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as reqd., as per GS.

Connecting the equipments to earth busbar incl. S&F 2x8SWG GI (Hot Dip) wire on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as reqd. & mending good damages as per GS.

S&F 25 mm dia medium gauge GI Pipe (ISI-Medium) Protection with necessary fittings and jointing metarials as reqd, as per GS.

Compound Light Fixing only outdoor / street light type fluorescent light fitting or MV light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc.

Supply & Fixing of 250 V, LED fittings complete with all accessories street light luminaire with single piece die cast alluminium housing and heat resistance toughened glass IP 66 protection out door luminaires (Philips Make,cat no:- BRP062LED65 CW SLAS1 PSU or equivalent of CG cat No-CRP-411-90-57-SL-GL-NSG) incl. fixing the fittings on the top of the pole as per direction of EIC. (For area lights on 8.5 mtr pole)

Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint, as per GS.

Wiring by 3x 1.5 sqmm single core PVC insulated copper wire through polythene pipe from loop box to fitting as per GS.[Make-Finolex/KEI/Havells/Polycab]

Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works a) 20mm size

S&F of 250V double door Timer DB [equivalent of 2+8 way SPNDB] with sheet steel enclosure, pnosphitised powder coated neutral bar, DIN rail with IP-43 potection comprising with 1 no. 25A DPMCB ('C' curve 10KA), 2 no. 16A SPMCB ('C' curve 10KA), 1no. Programmable time switch-24 hrs with minimum switching of 15 minutes and 1 no. 18A/25A 2-Pole power contractor with inner-outer plate & internal wiring by suitable size of cu. wire incl. 1 no. Auto-Manual bypass toggle switch and provision for earthing attachment, incl. LED indication light for running condition with mechanical locking arrangement, as directed by EIC.[Make-ABB/L&T/Crabtree]

SUPPLY OF AC MACHINE Supply and delivery of following Spilt type 3 Star Non Inverter AC machines suitable for operation from Single Phase 230 Volt, 50 Hz, 1φ ac supply with energey effiencient compressor including loading, unloading charges at work sites. (Make : 'O'-General / Mitshubishi Electric / Mitshubishi Heavy ) 1.5 TR [Make:O General Model no. ASGA18BMWA-B (R32) or Mitshubishi Heavy, Model No. SRK20CSS-S6/, R410A or Mitshubishi Electric., Model No. MS-GK18VA, R410A

INSATALLATION OF AC MACHINE Installation of the following AC Machines' indoor unit on wall and outdoor unit on outside wall by means of ready outdoor type frame fixed on wall by means of fasteners & bolts including mending good the damages to original finish.

Supply and Febrication Installation of necy. copper refrigeration pipe (5/8'' or 1/4'') line with air tight insulation, aero type etc. [indoor unit to outdoor unit vice versa]

Supply and laying 15 mm heavy type nylon reinforced PVC pipe with (Make as per Direction of EIC) for water drainage & laying through wall and mending good the damages.

Supply & laying of 1.1 KV grade 4C/Cu/XLPE/PVC 2.5 sqmm cable (Make - KEI/Polycab/Havells). [AC indoor unit to outdoor unit]

Supply & laying of 1.1 KV grade 3C/Cu/XLPE/PVC 2.5 sqmm cable (Make - KEI/Polycab/Havells).. [AC socket to outdoor unit]

S&F 240V, 25A, 3 pin Modular type plug top with indicator. (Brand approved by EIC).

Scafolding Charges

S&F of 250V double door AC Timer DB [equivalent of 2+8 way SPNDB] with sheet steel enclosure, pnosphitised powder coated neutral bar, DIN rail with IP-43 potection comprising with 1 no. 25A DPMCB ('C' curve 10KA), 1no. Programmable time switch-24 hrs with minimum switching of 15 minutes and 1 no. 18A/25A 2-Pole power contractor with inner-outer plate & internal wiring by suitable size of cu. wire incl. 1 no. Auto-Manual bypass toggle switch and provision for earthing attachment, incl. LED indication light for running condition with mechanical locking arrangement, as directed by EIC.[Make-ABB/L&T/Crabtree]

Rate Sholud be including of all type of taxes .

SAUMIK GHOSH (BID ID -5583019)

Debabrata Bhattacharjee (BID ID -5606012)