1/2" (12.7 mm) Dia bull lock bolt pin(Round Head) and collar zinc plated (Standard), 1612, Grip range 0.750" - 1.000" (18-25mm), confirming other technical requirement as per RDSO Drg. No. WD-11036-S-01, Alt-1 or latest and WD-11036-S- 02 Alt-Nil or latest Confirming to SPEC IS/RDSO/0001:2022 June.

Special Eligibility Criteria

1. 1

   This item to be procured from RDSO approved/Developmental sources registered under RDSO Item ID :3100575, Lock bolts & Collars used on Freight Stock on Indian Railways.,SubItem ID:3100575001 is available on IREPS vendor directory. The status of firm will be reckoned as on date of tender closing and not thereafter. The tenderers are to upload the copies of approval letter along with the offers. However, in case of removal /suspension/banning/delisting/downgrading etc after closing of tender, such changes shall be taken into account while considering the offers. BULK ORDER:- Railway reserves the right to order entire or bulk quantity on RDSO approved sources. DEVELOPMENTAL ORDER: - Development Vendors shall be eligible for development order of up to 20% of NPQ in regular tenders. Total quantity to be ordered on developmental sources shall be limited up to 20% of NPQ in regular tenders. Note: - It is clarified that the Developmental Vendors are only such vendors which are listed as developmental vendors on UVAM without any condition. DEVELOPMENTAL ORDER: -The development orders may be placed on firms which are unconditionally approved by RDSO as developmental vendor as per Para 1.3.1 of Annexure-B of WCRs e TENDER DOCUMENT FOR SUPPLY CONTRACTS. Note :- (i) In case there are not more than three Indian Suppliers categorized as Approved Vendor for a particular item, unconditionally approved developmental vendors ( without any condition of prototype / field trials etc) can be considered for placement of bulk order without any quantity restrictions as per Para 1.3.1 of Annexure-B of WCRs eTENDER DOCUMENT FOR SUPPLY CONTRACTS.

   Document optionalConfirmation required
2. 2

   TENDER SPECIFIC AUTHORIZATION: - Authorized agents of OEM must submit Tender Specific Authorization of the OEM. No back reference will be made in this regard & communication received after opening of tender will also not be entertained. The material supplied by the traders will be inspected at the OEM premises by the inspecting agency before supply. Neither one agent can represent two OEMs nor can one OEM authorize two agents. Purchaser reserves the right to reject both bids in such cases. In a tender either the Agent on behalf of the OEM or OEM itself can bid but both cannot bid simultaneously for the same item in the same tender. In cases where both OEM and their agent participate in bidding for same item, any or both the bids shall be liable to be rejected

   Document optionalConfirmation required
3. 3

   Only firm price offers will be accepted and offer with PVC will be summarily rejected.

   Confirmation required

Commercial-Compliance

1. 1

   Code of Integrity, Misdemeanor and Penalties :- I/We have carefully gone through the IRS conditions of contract (included and uploaded along with the bid document) particularly Para 2500 pertaining to "Code of Integrity, Misdemeanor and Penalties". I/We hereby certify that none of our sister concern or affiliates (such as having common partner/director/promoter/ owner/holding company decision control etc.) have participated in this tender which can give rise to a conflict of interest or fall under anti-competitive practices. We understand that the offers of all such sister concern or affiliates including ours are liable to be rejected as per relevant provisions of IRS terms and conditions. I/We, affirm that we shall abide by the Code of Integrity in general, with specific reference to conflict of interest [Para 2502 (e)], anti competitive practices [Para 2502(c)] and obligation to proactive disclosures [Para 2503]. I/ We understand that we are fully responsible for the above declaration and it shall not be the Railway's responsibility to verify the same. I/We are aware that we shall be liable for all consequences of violation of Code of Integrity, if detected, at any stage. (Note: - May confirm as Yes , to certify all the above certification . )

   Confirmation required
2. 2

   (ii)Code of Integrity, Misdemeanor and Penalties :-In case your confirmation in commercial compliance regarding Code of Integrity, Misdemeanor and Penalties is "No", then provide/upload the names and addresses of your sister concerns or affiliates .

   Document optional
3. 3

   Jurisdiction of Court :- As per Para 2703 of IRS Condition of Contract the Courts of the place from where the acceptance of tender has been issued shall alone have jurisdiction to decide any dispute arising out of or in respect of the contract.
4. 4

   Order shall be restricted to class-I local suppliers only and the venders who do not qualify to be class-I local suppliers should not quote in the tender as their offer shall not be considered for any ordering.

   Document optionalConfirmation required
5. 5

   Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

   Document optional

General Instructions

1. 1

   Firm has to read delivery period carefully before submitting the offer.
2. 2

   Firm has to read and quote warranty clause carefully while submitting Offer Otherwise offer may be ignored.
3. 3

   Firm has to clearly mention complete address of inspection place in offer.

1. 1

   Code of Integrity, Misdemeanor and Penalties :- Bidders are reminded to carefully go through the IRS conditions of contract (included and uploaded along with the bid document) particularly Para 2500 pertaining to "Code of Integrity, Misdemeanor and Penalties". Bidders shall certify that none of their sister concern or affiliates (such as having common partner/director/promoter/owner/holding company decision control etc.) have participated in this tender & which can give rise to a conflict of interest or fall under anti- competitive practices.The offers of all such sister concern or affiliates if quoted are liable to be rejected as per relevant provisions of IRS terms and conditions. Bidders shall abide by the Code of Integrity in general, with specific reference to conflict of interest [Para 2502 (e)], anti competitive practices [Para 2502(c)] and obligation to proactive disclosures [Para 2503]. Bidders shall fully responsible for the declaration/certification regarding Code of Integrity, Misdemeanor and Penalties given in commercial compliance and it shall not be the Railways responsibility to verify the same. Bidders shall be liable for all consequences of violation of Code of Integrity (including termination of contract) as per provisions in Para 2505 & 2506 of IRS conditions of contract , if detected, at any stage.