ROPM/Tender/Civil/ 2025-26/19 Date - 14.01.2026

Repairing cracks in floor with cement mortar (1:2) with necessary pigment to match with existing works, including prior cutting and cleaning the cracks as directed.

Repairs to roof cracks with cement and sand mortar(1:4) including cutting grooves and cleaning cracks and grouting the cracks with neat cement before repairs. (Cement 0.63 Kg/ Mtr.)

Earthwork in excavation of foundation trenches or drains in all sorts of soil (including mixed soil but excluding laterite or sand stone) including removing spreading or stacking the spoils with a lead of 75 mtr as directed. The item includes necessary trimming the sides of trenches leveling dressing and ramming the bottom, bailing out water as required complete. Depth of excavation not exceeding 1500 mm.

Earth work in filling in foundation trenches or plinth with good earth in layers not exceeding 150 mm including watering and ramming etc. layer by layer complete. (Payment will be made on basis of measurement of finished quantity of work). With earth obtained from excavation of foundation.

Single brick flat soiling by picked Jhama Brick including ramming and dressing bed to proper level filling joints with powdered earth or local sand.

Cement concrete with graded stone balast (40mm.size) excluding shuttering (6:3:1) proportion in ground floor and foundation.

Ordinary Cementconcrete (mix1:2:4) with graded stone chips (6mm nomina lsize) excluding shuttering and reinforcement,if any, in gound floor as per relevant IS codes. Pakur variety

Ordinary cement concrete (Mix-3:1.5:1) M-20 with graded stone chips (20mm down) excluding shuttering and reinforcement if any in ground floor. (With Pakur/ Chandil Variety).

Hire and labour charges for shuttering with centering and necessary staging up to 4mtr.using stout props and thick hard wood planks of 25 to 30mm. Thick with required bracing for concrete slabs, beams, columns, lintels, curved or straight including fitting and fixing and striking out after completion of work (upto roof of ground floor) a) 25mm to 30mm thick wooden shuttering as per decision and direction of the Engineer-in-Charge.

b) 25mm to 30mm thick shuttering without staging in foundation etc.

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust, cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every inter section complete as per drawing and direction. For works in foundation, basement and up to roof of ground floor Tor steel/Mild Steel. (JSW/JSPL/SHYAM/SRMB/BMASL/ELECTROSTEEL/SSL)

M.S. or W.I. ornamental grill or approved design joints continuously welded with M.S., W.I. flats and bars for windows, railing etc. fitted and fixed with necessary screws and lugs. Grill weighing above 16kg/sq.m and above. Gr. Floor

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and racking out joints or roughening of concrete surface including throating, nosing and drip course were necessary. i) 15mm thick with cement mortar (1:6)

ii) 20mm thick with cement mortar (1:6)

iii) 10mm thick with cement mortar (1:4)

Neat Cement Punning about 1.5mm thick in wall, dado, windowsill, floors, drains etc.

Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75mtr.

Dismantling all type of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75m. In ground floor including roof. Upto 150mm thick.

Removal of rubbish, earth etc. from the working site and disposal of the same beyond the compound in conformity with the Municipal/Corporation rules for such disposal, loading into truck and cleaning the site in all respect as per direction of the Engineer-in-Charge.

Stripping off worn out plaster and raking out joints of wall, ceilings, etc. upto any height and in any floor including removing rubbish within a lead of 75 m. and stacking the servicable materials as directed.

M.S. works in brackets made from flats , angles, tees, etc. to size specialy bent, twisted, forged, making holes drilled and fitted to rafter of trusses with necessary bolts, nuts, washers or screws etc.

Artificial stone in floor, dado, staircase etc. with cement concrete (4:2:1) with stone chips laid in panels as directed with topping made with ordinary/ white cement (as necessary) and marble dust in proportion (2:1) including smooth finishing and rounding off corners and including raking out joints or roughening of concrete surface and application of cement slurry before flooring work using cement @ 1.75 kg/sqm all complete including all materials and labour. In ground floor. 3mm thick topping (high polishing, grinding on this item is not permitted) with ordinary cement. Using grey cement. 35mm thick.

Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 Nos. of key stones (10mm) fixed with araldite at the back of each tile and finishing the joints with white cement mixed with colouring oxide as required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. i) In Floor, Coloured decorative With sand cement mortar (4:1) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 kg/Sq.m & joint filling using white cement slurry @ 0.20 kg/Sq.m. Area of each tile above 0.09 Sq.m.

Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 Nos. of key stones (10mm) fixed with araldite at the back of each tile and finishing the joints with white cement mixed with colouring oxide as required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. ii) In Wall ,Coloured decorative. With sand cement mortar (3:1) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 kg/Sq.m & joint filling using white cement slurry @ 0.20 kg/Sq.m. Area of each tile upto 0.09 Sq.m.

Supply best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete (In all floors for internal wall & upto 6 m. height for external wall) (ii) 4 mm. thick

Easing and oiling, cleaning collapsible gate and repairing to locking arrangements.

Anodised aluminium Aldrop / Sliding bolts of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 2681/ 66) fitted and fixed complete.(iv) 300 mm. x 19 mm. dia bolt

Supplying, fitting and fixing M.S. clamp for door & window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete (1:2:4) as per direction. 40mm X 6mm, 125 mm length.

Supplying fitting and fixing in position Aluminium Peg stay 300mm long .

Wood work in door & window frame fitted and fixed in position complete including a protective cost of painting at the contract surface of the frame excluding the cost of concrete, iron Butt Hinges and M.S clamps. SAL: Local.

Cleaning and removing conservancy garbage mixed with rubbish & otherfithy materials from the road side flank, drain and compound including shutting, loading, unloading to and from truck or cartby mathor labour & removing the same to any distance.

Supply, fitting and fixing low-down cistern parts Internal fitting for cistern complete of approved make.

Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete, C.I. brackets including two coats of painting to bracket etc.

Supplying & laying 3mm thick pre-fabricated plastomeric water proofing membrane conforming to EN 12311-1 & ASTMD 5147, manufactured with atactic poly propylene (APP) modified premium grade asphalt , specially reinforced with non-woven polyester core with polyester reinforcement @160 gms per sqm & both faces covered with thermo-fusible polyethylene film /MineraL on top face over a coat of primer @ 0.40 lit/sqm of manufacturer's specification on smooth,clean dry surface prepared wherever required.Lap joint shall be provided of 75 mm in longitudinal & 100 mm in transverse direction and fused using LPG/ Propane torch employing extra care ensuring full bondage, complete removal of entrapped air and sealing edges into grooves in appropriate manner as per direction of Engineer -in-charge all complete including materials,labour and applicable taxes. (Payment shall be made on the basis of finished surface area.).

Supplying, fitting & fixing fibre reinforced polymer (FEP) Composite door shutters as per approved design with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to satisfy IS: 4020 door testing performance criteria. In Ground floor. (i) 32 mm. thick

Supplying, solid flush type doors of deluxe decorative (both side) quality conforming to IS : 2202 timber frame consisting of top and bottom rail and side styles of well seasoned timber 65 mm. wide each and the entire frame fitted with 27.5 mm. wide battens placed both ways in order to made the door of solid core and internal lipping with teak, mahogony or rose wood approved decorative veneers using phenol formaldehyde as glue etc complete including fitting, fixing the shutters in position but excluding the cost of hinges and other fittings in ground floor. (a) 35 mm. thick shutters (single leaf)

Removing sludge from septic tank, soak well etc. by methor labour including disposal of the same outside the compound as directed. Up-to 20 users. Within a lead of 150 meter.

Supplying EPDM gasket of approved make and brand as per direction of Engineer-In-Charge. i) for sliding windows b) 'U' shaped EPDM gasket for frames.

ii) for openable/ casement windows.a) EPDM / weather gasket for outler frame and mullion.

iii) Weather gasket/wool pile for door vertical.

Supplying PVC rollers for sliding windows as per direction of Engineer-In-Charge.

Supplying maruti lock. (100 mm.)

Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for Partly glazed partly panelled or fully glazed single leaf aluminium swing door made of extruded and annodized alloy aluminium sections, fabrication, including cutting to proper shape and size, drilling and aligning, fitted with heavy duty hydraulic action floor spring placed in the floor with mending damages, with top pin assembly of approve make and brand, fitted with in built locking arrangement, flush bolt, glazing clips and all other necessary fittings, fixtures, adhesives and joineries, cutting glass of approved make to requisite shape and size fitting with dry set neoprene of EPDM gasketting, cutting to requisite shape and size panel board (prelaminated particle block) fixing them with glazing clips as per drawing specification and direction of Engineer-In-Charge.[The rate includes the hire charges of all tools and plants, adhesives, joineries such as screw, cleat angle etc. but excluded cost of extruded aluminium sections, glass, panel boards, neoprene/EPDM gasketing, locking arrangement, weather gasketing / wool pile, floor spring, top pin, handle, tower bolt, glazing clips etc, ]

Supplying heavy duty hydraulic double action floor spring along with top pin/set of Pivots conforming to IS: 6315 or any approved make as per direction of Engineer-in-Charge.

Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I) c)25mm dia

Supplying P.V.C. water storage tank of approved quality with closed top with lid. ( Black) - Multi layer. 1000 litre capacity ( Sintex/Etl/Patton)

Labour for hoisting PVC water storage tank.Up to 1500 litre capacity.Upto 1st storey from GL

Labour for punching hole in PVC water storage tank up to 50mm dia.

Supplying, fitting & fixing UPVC pipes A-Type and fittings conforming to IS: 13592-1992 with all necessary clamps nails, including making holes in walls, floors etc. cutting trances in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materials (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.a) UPVC pipe, 125mm dia.

a) Plain Tee (ii) 125 mm. Dia.

b) Bend 87.5 degree

c) Shoe, 125mm dia.

Polishing only of old marble or terrazo work with oxalic acid powder using 33 gms/ sq.m. by manual labour / machine where necessary.

Applying epoxy based reactive joining agent for joining the old concrete with fresh concrete to be applied within manufacturer's specified time as per manufacturers specification. (0.4 Kg / m² of concrete surface).

Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S.205/66) and fitted and fixed with cadium plated screws : (v) 100 x 63 x 3.2 mm

Anodised aluminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230 / 72) fitted and fixed complete. (a) With continuous plate base (Hexagonal / Round rod) (v) 125 mm grip x 12 mm dia. rod

Anodised aluminium barrel / tower/ socket bolt (full covered) of approved quality manufactured from extruded section conforming to I.S. 204 / 74 fitted and fixed with cadmium plated screws: (iv) 150 mm. long x 10 mm. dia bolt

(a) Supplying 'Godrej' mortice lock chromium plated with latch and Keys 4 levers, including fitting and fixing complete.

Scraping of moss, blisters etc. thoroughly form exterior surface of walls necessitating the use of scraper, wire brush etc. (payment against this item will be made only when this has been done on the specific direction of the Engineer-In-Charge).

Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick).In Gr. Floor.

In F.Floor(External)

2nd Floor (External)

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or concrete surface old or new surface to receive Distemper / Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground floor. Water based interior grade Acrylic Primer. one Coat.

Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) :(Two Coats),Standard Quality.

a) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

b) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothing surfaces by sand papering etc. (This item is applicable to new work or old work when the original surface has been exposed by removal of old paint)

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface if necessary. a. On timber or plastered surface with super gloss (hi-gloss). –2 coats (with any shade except white).

b. On steel or other metal surface with super gloss (hi gloss) –2coats (with any shade except white).

Copal varnish of approved quality including preparing surface. (ii) On old varnish surface including removing old varnish and exposing original surface.TwoCoats.

Supplying, fitting & fixing alloy iron with brass spindle bib cock/stop cock of approved brand & made, spray painted & tested to 21Kg./sq.cm. –15mm.

Supplying, fitting & fixing approved brand 32 mm dia PVC waste pipe, with PVC coupling at one end fitted with necessary clamp, 750 mm long.

Supplying, fitting & fixing gunmetal wheel valve of approved brand and make tested to 21kg/ sq.cm.(for water line only) a) 20 mm dia.

Supply ,fitting and fixing Flat back Urinal (half stall in urine) in white vitreous Chinaware of approved make in position with brass screws on 75mm X 75mm X 75mm wooden blocks complete. (ii) 470 mm X 280 mm X 340 mm

Supply ,fitting and fixing Wash basin white vitreous china of approved make (without fitting) (ii) 550 mm X 400 mm size

Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges. (ii) 600 mm X 450 mm

Supplying, fitting and fixing glass shelf with aluminium guard rails. (a) Oridinary type with 5.5 mm sheet glass. (ii) 600 mm X 125 mm

Supplying, fitting and fixing shower of approved brand and make. (ii) 150 mm. round. (g) PTMT overhead shower (Prayag or equivalent)

Cleaning the concrete surface by removing dirt and debris, marking defective locations and removing loose concrete by careful stripping untill hard surface is exposed, cutting the concrete to regular shape, wire brushing the exposed surface and removing debris from site complete as per direction of the Engineer - in - Charge.

Cleaning the exposed reinforcement preferably upto full diameter by wire brush, applying two coats of polymer based rust removing compound left for 24 hours, removing the coating and then applying two (2) coats of polymer modified anti corrosive protective coating formulated to inhibit the corrosion of reinforcement as per manufacturer's specification][Mode of measurement:The affected surface area of reinforcement shall be considered for payment] Note: Applicable only when the full diameter of reinforcement steel is exposed.

Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.

Removing loose scales, blisters etc. from old painted surface and thoroughly smoothening the surface to make the same suitable for receiving fresh coat of paint.

Please Enable Macros to View BoQ information