O&M of CPWS Scheme to Tadipudi and 16 other habitations of Tallapudi Mandal in East Godavari District for the year 2026-27 (Special Repairs). Est. Cost: Rs. 25.00 Lakhs

Removing and restocking the existing filter media from the 5.00 MLD RSF Filter beds including all labour charges etc complete.

Cost. Supply and delivery of New pebbel stones of different sizes from the source. This rate including cost and conveyance of all materials and all labour charges for loading and unloading etc.

Cost, Supply and delivery of Sand filter media as per specification from the source. This rate including cost and conveyance of all materials and all labour charges for loading and unloading etc. complete.

Washing, cleaning and screning and placing the pebble gravel of different sives from 3.00 mm to 40 mm as per the specification directed by the departmental officer in-charge of the work including all labour charges for screening, etc complete. For Old Pebble.

Placing of Filter media sand in Rapid sand filter including all labour and all incidental charges etc complete.

Excavation and Removal of silt or mixed with sand in slushy condition from infiltration well including disposting of the same by 6 collecting and rehandling after draining out water on the river bed as directed etc. complete with all leads all lifts. For desilting the Flocculator. From 5.00 mt. to 6 mt. deep under water.

Cost and Supply of 75 mm dia 8 Kg/cm2. PVC Pipe including all conveyance charges etc.

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, 15:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN 3202F4/BS 5163 Type A Flange drilling as per 15-1538 excluding all taxes, duties and transportation. For 350 mm dia PN 1.6 Di D/F Gate.

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, 15:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN 3202F4/BS 5163 Type A Flange drilling as per 15-1538 excluding all taxes, duties and transportation. For 250 mm dia PN 1.6 Di D/F Gate.

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, 15:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN 3202F4/BS 5163 Type A Flange drilling as per 15-1538 excluding all taxes, duties and transportation. For 150 mm dia PN 1.6 Di D/F Gate.

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, 15:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN 3202F4/BS 5163 Type A Flange drilling as per 15-1538 excluding all taxes, duties and transportation. For 100 mm dia PN 1.6 Di D/F Gate.

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, 15:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN 3202F4/BS 5163 Type A Flange drilling as per 15-1538 excluding all taxes, duties and transportation. For 80 mm dia PN 1.6 Di D/F Gate.

Design, Supply, delivery, erection, testing and commissioning of pumping Machinery with all accessories, appurtenances, on common delivery main at each pumping station, piping as per design requirement and as directed by the department as per Technical specifications, as specified complete as specified in technical specifications and details as given below complete on turn-key basis including trial run. The scope of the work includes 11 electrical switchgear Panels, electrical equipment connections including required cabling from pump starter panel to transformers with necessary piping etc. as per requirement, electrical safety system etc., for finished item of work inclusive/exclusive of all taxes of all etc complete. For 25 HP Submersible Pump sets each Discharging of 2000 LPM and head of 23.00 meters at Collection well at Godavari River. For 25 HP Open well submersible Motors.