Loading…
Loading…
Tender Value
₹8.4 L
EMD Value
₹8,395
Closing Date
3 Jul 2026, 6:00 pm5d left
Similar tender results from the same govt authority in the past 3 years.
Ahmedabad Municipal Corporation Central Zone
Manufacturing, Supplying and Fixing 900 mm dia Size Kinfe Edge Gate Valve for 900 mm dia. SWD Other Civil Works in Diff. places at Sabarmati River Front in Central zone AMC.
318121
Central Zone Short Tender Notice No.04- 2026-2027 Tender No.31
Open
Civil Works - Others
Ahmedabad
₹900
Municipal Commissioner, Ahmedabad
₹8,395
26 Jun 2026
26 Jun 2026
26 Jun 2026
3 Jul 2026
26 Jun 2026
Name of work: Manufacturing ,Supplying and Fixing 900 mm dia Size Kinfe Edge
Gate Valve for 900 mm dia SWD Other Civil Works in Diff. places at Sabarmati River
Front in Central zone AMC.
Qty. Items Rate Rs.Ps. per
1 Job Work of providing, fabricating, and fixing SS Flange
tail pieces set of for following dia RCC pipe for fixing of
knief Edge Gate Valve with using Grouting matrials .
Rate to include arranging, transporting, fabricating in
SS Sheet flats and Flange with grouting in RCC pipe
anchoring them in RCC pipe by anchor bolts and filling
the pipe by rich cement mortar mixed with chemicals, etc.
(i) 0.00 for 300 mm dia 43996.00 Nos.
(ii) 0.00 for 450 mm dia 61088.00 Nos.
(iii) 0.00 for 600 mm dia 87718.00 Nos.
(iv) 1.0 for 900 mm dia 134105.00 Nos.
(v) 0.0 for 1200 mm dia 154662.00 Nos.
(vi) 0.0 for 1400 mm dia 163570.00 Nos.
(vii) 0.0 for 1600 mm dia 179688.00 Nos.
(viii) 0.0 for 1800 mm dia 228613.00 Nos.
(ix) 0.0 for 2000 mm dia 248248.00 Nos.
2 Job Work of providing, fabricating, and fixing SS Flange
Body type knief Edge Gate Valve of following dia (Inside)
. Rate to include arranging, transporting, fabricating,
laser cutting, plasma cutting, Molding, machining,
Drilling in SS Sheet, flats ,SS Ring ,Flange with rubber
lining and Nut bolts etc. complete.
(i) 0.00 for 300 mm dia 101138.00 Nos.
(ii) 0.00 for 450 mm dia 132737.00 Nos.
(iii) 0.00 for 600 mm dia 173438.00 Nos.
(iv) 1.0 for 900 mm dia 258548.00 Nos.
(v) 0.0 for 1200 mm dia 302328.00 Nos.
(vi) 0.0 for 1400 mm dia 338952.00 Nos.
(vii) 0.0 for 1600 mm dia 376310.00 Nos.
(viii) 0.0 for 1800 mm dia 517063.00 Nos.
(ix) 0.0 for 2000 mm dia 576943.00 Nos.
3 Job Work of providing, fabricating, and fixing SS
supports, floor and railings on top of the gate frame to
enable the fixing of gearbox, SS frame top ends to be
bound with the floor structure of the gear box. Rate to
include providing the SS sheets, flats to fabricate the top
head stock supporting structure, spindle cover pipe and
fixing the top plates by bolts in such a manner that it can
be opened easily for future maintenance at site, etc.
(i) 0.00 for 300 mm dia 20597.00 Nos.
(ii) 0.00 for 450 mm dia 24013.00 Nos.
(iii) 0.00 for 600 mm dia 29144.00 Nos.
(iv) 1.0 for 900 mm dia 32686.00 Nos.
(v) 0.0 for 1200 mm dia 43018.00 Nos.
(vi) 0.0 for 1400 mm dia 48357.00 Nos.
(vii) 0.0 for 1600 mm dia 53872.00 Nos.
(viii) 0.0 for 1800 mm dia 73208.00 Nos.
(ix) 0.0 for 2000 mm dia 82972.00 Nos.
4 Job Work of providing, turning, fabricating and fixing SS
spindle connecting the gear box and barrier and head
stock of gearbox on top of the gate. Rate to include
providing the SS spindle rod, turning it for the
recommended pitch length of teeth, casting the gears
from SG grade steel, turning the warm gears ,cutting
teeth in to round gear, turning the hole on round gear
exactly to match the outer teeth of the spindle, fixing all
assembly to form the gear box with housings and
bearings, thrust bearing on top and bottom of round gear
fixed between SS plates, covering the gear box sides
also in by SS plates .fabrication of head stock by plates
and pipe to form the standing structure of rotation height
required, fixing all on platform, etc. complete.
(i) 0.00 for 300 mm dia 40009.00 Nos.
(ii) 0.00 for 450 mm dia 47670.00 Nos.
(iii) 0.00 for 600 mm dia 53535.00 Nos.
(iv) 1.0 for 900 mm dia 67677.00 Nos.
(v) 0.0 for 1200 mm dia 70642.00 Nos.
(vi) 0.0 for 1400 mm dia 78536.00 Nos.
(vii) 0.0 for 1600 mm dia 87087.00 Nos.
(viii) 0.0 for 1800 mm dia 97531.00 Nos.
(ix) 0.0 for 2000 mm dia 111041.00 Nos.
Job Work of providing and fixing 150 NM torque ,36 RPM
, ON -OFF type 415 V,50 Hz, AC Three Phase Multi turn
5 0.00 Electrical Actuator with enclosure water tight IP 67 , 138025.00 Nos
continuous position indicator with limit switches etc.
complete.(AMC Approved Rate )
Constructing Valve Chamber / penal Room on following
dia SWD line (inside clear)including excavation, refilling,
plain cement concrete (1:4:8) for foundation, Pre cast /situ
6 to cast RCC M-30 , 20 mm thick inside cement plaster,
PVC foot steps, brick masonary in C.M. (1:5), including
cost of manhole cover and RCC slab in RCC M-20 etc
(i) 0.0 for 2000 mm dia,1800 mm dia,1600 mm dia 139392.00 Nos.
(ii) 1.0 for 1400 mm dia ,1200 mm dia, 900 mm dia 105653.00 Nos.
(iii) 0.0 for 600 mm dia ,450 mm dia,300 mm dia 76032.00 Nos.
providing and fixing pakka dummy in following dia RCC
pipe line with using MS plate ,MS garder ,sand bags,
7 Diversion pipe, plug ,Brick work, as per required and
removing same after completion work etc comp.Do As
(i) 0.0 for 2000 mm dia,1800 mm dia,1600 mm dia 79200.00 Nos.
(ii) 2.0 for 1400 mm dia ,1200 mm dia, 900 mm dia 52800.00 Nos.
(iii) 0.0 for 600 mm dia ,450 mm dia,300 mm dia 30800.00 Nos.
Providing and casting in situ Controlled Cement Concrete
(with ordinary portland cement) M-25 for Well curbs
including necessary shuttering, laying, vibrating and
curing complete.
(i) 2.00 Flat Top/Bottam Slab with shuttering 8077.00 m3
(ii) 2.00 vertical wall above 25 cm 7936.00 m3
Providing Labour for Mice. Work for Breakdown work
releted job including required tools etc.comp.
(i) 24.00 Unskilled Labour for 8 Hrs Shift 640.00 Shift
(ii) 4.00 Skilled Labour for 8 Hrs Shift 656.00 Shift
Conveyance charge of earth, lime, murrum, building
,rubbish, manual garbage, sludge, excavated rock, fly
ash,aggregate of any kind etc. complete. Upto 5.0 Km
ReFilling available excavated earth (excluding rock) in
trenches, plinth, sides of foundations etc. in layers not
exceeding 20 cm in depth consolidation each deposited
layer by ramming and watering.
Barricating the entire break down or excavated area on
rental basis using wooden ballies/MS angles at max
12 10.00 mt center to center ,G I sheet, reflective paint board out 1056.00 Rmt
side to avoid accident and for smooth traffic diversion and
The same shall be removed after complention of work.
Hiring Charge for JCB machine bring for excavation of
the break down pit and loading the excavated soil for
shifting another place or misce.work etc.complete. as
directed.rate for 8 Hrs working in Day.
Hiring charges of heavy 12 Tonne capacity Hydro
14 1.00 machine for lifting the Any Matrials when required any 3334.49 Day
time. rate for 8 Hrs working in Day.
Hiring and operating the Tractor for Earth work and other
15 6.00 requirements with Arranging fule Set Do As Directed. 8 2104.09 Day
Hrs working in Day.
Hiring and operating following capacity Mud Pumps
incl. Cost of fuel and operator including the cost of to and
16 fro transportation, laying of the delivery hoses as
required, lowering and lifting the pumps as and when
required etc. complete. Set Do As Directed.for 8 Hrs Shift
(ii) 0.00 10 HP 1496.00 Shift
(iii) 0.00 20 HP 2232.00 Shift
Hiring and operating the Following capacity 3 Phase
Electric Generator for operating machinery, and lighting
and other requirements with Arranging diesel to run the
D.G. Set Do As Directed. 8 Hrs Shift.
(i) 10.00 10 KVA 2464.00 Shift
(ii) 0.00 20 KVA 2816.00 Shift
(iii) 0.00 40 KVA 4018.00 Shift
Hiring and operating the electric Breaker Machine for
Dismantaling work for removing damage manhole and
other requirements with Arranging cable Set Do As
Providing lighting arrangement for doing work at night
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
P-TENDER NO.31 Vol -2.pdf
TENDER NO.31 VOL-1.pdf
Download all tender documents and submit your bid