REPAIR AND MAINT OF STREET LIGHTS, SECURITY LIGHTS, GARDEN LIGHTS AND POST TOP LANTERN AND OTHER RELATED WORKS AT DEFENCE LAB JODHPUR

Amount

Disconnecting and taking down old unserviceable LED street light/Security light fittings with brackets fixed on HT/LT/Street light poles, repairing after cleaning and replacing the un-serviceable parts and refixing / reconnecting after replacing wires / jumpers as required for proper functioning of street light fittings complete all as specified and directed by engineer-in-charge. Note :- (i) Parts replaced shall be measured and paid seperatly. (ii) Cost of replacement of wornout wire of the fittings and connections as per existing size of conductor of the each fittings shall deemed to be included in the rate quoted of this item.

Supply and fixing post top lantern LED type 40 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp including suitable size of wire of any length for all necessary connections complete all as specified and as directed by Engineer-in-charge.

Supply and fixing LED flood light 210 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp including suitable size of wire of any length for all necessary connections complete all as specified and as directed by Engineer-in-charge.

Supply and fixing LED street light fitting 120 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics with IP 65/66 protection including suitable size of wire of any length for all necessary connections complete all as specified and as directed by Engineer-in-charge.

Supply and fixing LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics all necessary connections complete with IP 65/66 protection including suitable size of wire of any length for all necessary connections complete all as specified and as directed by Engineer-in-charge.

S&F Driver for LED 60/72 Watt omplete all as specified and directed by Engineer-in-charge. Make :- Bajaj / Havells / CG/Wipro

S&F Driver for LED 90/120 Watt omplete all as specified and directed by Engineer-in-charge. Make :- Bajaj / Havells / CG /Wipro

S&F Surge Arrester for LED 25 to 75 Watt omplete all as specified and directed by Engineer-in-charge. Make :- Bajaj / Havells / CG/Wipro

S&F Surge Arrester for LED 75 to 150 Watt omplete all as specified and directed by Engineer-in-charge. Make :- Bajaj / Havells / CG/Wipro

S&F in repair hot press moulded SMC junction cable jointing box 200x140x95 mm dimension,off white color with SMC base and SMC door,door fixed with hinge on left side ,door fixed with mechanical fasteners inlcuding bus bar and MCB for connection to the cable( Sintex Cat Part No:GSJB-2014 or equivalent approved by engr-in-charge) complete all as specified and as directed by engineer-in-charge.

S&F MCB SP ‘C’ curve, 10KA 6-32 amps including necessary connection including taking down existing unserviceable MCB from Junction box complete all as specified and directed by Engineer in charge.

Supply, laying, jointing and testing 2.50 sqmm PVC insulated,unsheathed,multi-stranded,three core,FRLS copper conductor cable for connection of security light to junction box or over head conductor including taking down old unserviceable cable complete all as specified and as directed by Engineer-in-charge.

S&F in repair rigid non metalic PVC conduit (ISI Mark) of external dia 25mm with fixing accessories such as couplers,saddles,nuts,clamps etc all as required at site, complete all as specified and as directed by Engineer-in-charge. Note :- The cost of Clamps, nut bolts etc shall be included in the rate quoted.

Supply & fixing MCB TP 63 Amps 240 volt complete all as specified and directed by Engr- in charge

Supply & fixing in replacement LED bulb of 9 watt, 6500 K complete all as specified and directed by Engr- in charge

Supply and Fixing ,nature switch(using infrared sensor technology) based automatic street light panel. The sensor aloghwith suitable 3 nos Power contactors, 3 Nos incoming & outgoing MCBs each 63 Amp and circuit wiring minium 16 sqmm copper wire should be enclosed in a pole/wall mounted rust proof, electric shock proof termite proof and FR grade SMC enclosureconfirming to IP 54. The circuit should also have the provision of manual operation(sensor by-pass operation). The sensor should have also part night operation facility of min 4 hrs to max max 12 hrs complete all as specified and as directed by Engineer-in-charge. Make- Swadeep Model - Swadeep- 02EC-25kw3p or equivalent

S&F 10 sqmm 2 Core (TC) heavy duty complete all as specified and as directed by Engineer-in-charge.

M&L for XLPE insulated, armoured heavy duty electric cable withaluminium conductor, 1100 volts grade, cross area 25 sq. mm 4 core complete all as specified and as directed by Engineer-in-charge.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and as directed by Engineer-in-charge.

M&L for spreading clean dry sand(tibba sand) in trenches for cushioning to UG LT cable and punning to provide required cover to UG cable complete all as specified and directed by Engineer-in-charge. Note :- Punned thickness shall be measured for the purpose of payment.

Supply and laying 40 to 50mm thick roughly hammer dressed Jodhpur stone patti for cable cover 25 cm to 30 cm wide and not excedding 60cm long each laid dry abutting with each other with maximum gap between adjacent slabs n. exc 10mm complete all as specified and as directed by Engineer-in-charge.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick in any type of soil complete all as specified and as directed by Engineer-in-charge.

Removing excavated materials to a distance not exceeding 50m depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed by Engineer-in-charge.

Shri Electrical Enterprises

vinayandsons

SANJOLI CONSTRUCTION COMPANY

M/S SUMAN ENTERPRISES

M/s JOG SINGH MATERIALS

VARDHMAN SALES CORPORATION

Anil Builders

SHRI BHIKSHU ART AND CONSTRUCTION CO

new india engineers

KAVYA ENTERPRISES

S.G.ENGINEERING COMPANY