SPECIAL REPAIRS TO BLDG NO-P-2 AND PROVN OF TOILETS FOR PBOR AT MISSAMARI UNDER GE MISAMARI

Amount

Demolition Cement Concrete (un-reinforced) of any description in Ground Floors, Pavings not exc. 150mm thickness (above or below Ground Level), complete all as specified and as directed. (Note:Demolished material to be used for filling under floors to bring upto required level, if neccesary)

Demolition of Cement Concrete (reinforced) of any description and in any position not otherwise specifically provided for,complete all as specified and as directed.

Demolition Brick Work or Stone/ Bolder masonary built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any description, complete all as specified and as directed. Note:Demolished material to be used for filling under floors to bring upto required level.

Taking down Chowkat or Frame with shutters (without taking off Shutter from the Frame) not exc. 1.50 Square Metre Each,,complete all as specified and as directed.

Taking down Chowkat or Frame with shutters (without taking off Shutter from the Frame) exc. 1.50 Square Metre but not exc. 4.00 Square Metre Each, complete all as specified and as directed.

Taking down Cement Plaster of any description on Brick Walls, Concrete Surfaces including racking out joints, hacking for key, scrubbing down with Water remove Dust, debries/ rubbish etc., complete all as specified and as directed.

Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing), removing from the Sites and rubbish off the Premises, complete all as specified and as directed.

Taking up or down Steel Tubing 15mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.

Taking up or down Steel Tubing 20mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.

Surface dressing n exc15 cm deep in soft and loose soil, complete all as specified and directed.

Excavation in trenches not exc. 1.5 Metre Wide and not exc. 1.50 Metre in Depth for foundation etc. or for Shafts, Wells, Cess Pits, Manholes, Pier Holes for laying of UG Cable/Pole/Stays etc, and getting out as in Soft/Loose Soil, complete all as specified and as directed.

Returning, Filling in, including Spreading, Levelling, Watering and Well Ramming in Layers not exc. 25 Cm in Soft/Loose Soil, complete all as specified and as directed.

Removing excavated Materials (Soils) n.exc. 50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the Starting Point in Soil, complete all as specified and as directed.

M&L for Cement Concrete 1:4:8, Type D2, (40mm graded aggregate) in Foundations, Filling and Mass Concrete, etc. complete all as specified and as directed.

M&L for reinforced Cement Concrete (nominal mix) type A1 1:1 1/2:3 (20mm graded stone aggregate) in Foundations including Rafts, Footings, Foundation Beams; Plinth Beams; bases for Columns, etc.; Basement Slabs, Under-reamed Piles and Mass Concrete, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be measured and paid separately under relevant Items.

M&L for reinforced Cement Concrete (nominal mix) type A1 1:1 1/2:3 (20mm graded stone aggregate) in columns, pillars, piers, post and strut, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be measured and paid separately under relevant Items.

M&L for reinforced Cement Concrete (nominal mix) type A1 1:1 1/2:3 (20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.50 Metre span, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be measured and paid separately under relevant Items.

M&L for TMT Bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, complete all as specified and as directed.

M&L for TMT Bars 5mm dia and over upto and including 10mm dia in Stirrups, Spacers and Binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, complete all as specified and as directed.

M&L for Formwork to Sides of Concrete Foundations, Footings, bases of Columns, Raft and Raft Beams, Sides and Soffits (if any) of foundation and plinth beams and similar work; Square, rectangular or polygonal, vertical or to batter, flat, rough finished surfaces of concrete, complete all as specified and as directed.

M&L for Formwork to sides of Pillars, Posts, Struts, Piers, Columns and stanchions, flat, rough finished surfaces of concrete, complete all as specified and as directed.

M&L for Formwork to Sides and Soffits of Floor or Roof Beams, Lintels, Cantilevers, Shelves including Supports, Overhangs, etc. also splays between Floors and Beams, etc., rough finished surfaces of Concrete, complete all as specified and as directed.

M&L for Formwork to Soffits of suspended Slabs such as Roof Slabs, Floor Slabs, Landings and similar work; not exc. 200mm thick (horizontal or sloping), rough finished surfaces of Concrete, complete all as specified and as directed.

M& L for Providing precast RCC type B1 1:2:4 (20 mm graded aggreagae) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces, complete all as specified and as directed.

M&L for Brick Work with Sub-Class ‘B’ Bricks (with Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.

M&L for Brick Work with Sub-Class ‘B’ Bricks (with Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:4, complete all as specified and as directed.

M&L for 40mm thick Cement Concrete Type B0 1:2:4 (12.5mm graded aggre-gate) as in Damp Proof Course to horizontal or vertical surfaces including necessary formwork using wpc@3% of weight of cement including necessary formwork, complete all as specified and as directeed. NOTE : WPC will be measured and paid as ‘Supply only’ under appropriate Item.

S&F anodised frame for doors/window ventilators with one or more rebates including joining cleats for fixing etc complete all as specified and directed.

M&L for Rendering 15mm thick in Cement Mortar 1:6 on other than fair faces of brick or concrete Surfaces , plastered surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L for Rendering 15mm thick in Cement Mortar 1:6 on Brick Walls or on Concrete Surfaces, plastered surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L for Rendering 15mm thick in Cement Mortar 1:4 on Brick Walls or on Concrete Surfaces, plastered surfaces finished Even and Smooth without using Extra Cement and mixed with liquid WPC, complete all as specified and as directed. Note: WPC will measured and paid separately under supply only items

Supply only Integral Water Proofing Compound, conforming to IS-2465-1975 and/or as approved, complete all as specified and as directed.

M & L for 75mm thick cement concrete 1:3:6 type C2, using 40 mm graded aggregate as in plinth protection and finishing surface even and smooth without using extra cement, complete all as specified and as directed.

M&L for sand filling under floors spread, levelled, watered and well rammed in layers n.esc 25 cm thick, complete all as specified and as directed.

M&L for Hardcore of broken stone or boulders of gauge not exc. 63mm, deposited, spread and levelled in layers not exc. 15 Cm thick, watered and rammed to a True Surface, complete all as specified and as directed.

M&L for 100mm thick Cement Concrete 1:4:8, type D2 (40mm graded aggregate), as in Sub-base finishing Concrete Surfaces Even and rough, complete all as specified and as directed.

M&L for Non skid ceramic coloured jointless tiles 7 to 8mm thick (Square/ Rectangular) area of each tiles exceeding 0.11 Sqm but n.exc. 0.18 Sqm in floors etc. over and including 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles complete all as specified and as directed.

M&L for glazed ceramic coloured tiles, glossy finished of size 350x450x7mm thick as in vertical surfaces such as skirting/dados and riser of stems., over and including including 10 mm thick rendering/backing coat in CM 1:4 and set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles,complete all as specified and as directed.

M&L for Non skid ceramic coloured jointless tiles 7 to 8mm thick (Square/ Rectangular) area of each tiles exceeding 0.18 Sqm but n.exc. 0.38 Sqm in floors etc. over and including 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles complete all as specified and as directed.

S&F Factory made Solid PVC Door Frame of size 50x47 mm made out of 5.0 mm thick plain colour PVC Sheet reinforced with Mild Steel Square Tube and fixing in opening as per Specification and Drawing of MES Schedule Part-II, complete all as specified and as directed.

S&F Factory made Solid Panel PVC Door Shutter 30mm thick (Style) consisting of Frame made out of Mild Steel Square Tube for Top and Bottom Rails, mild steel Frame shall be covered with heat moulded plain colour PVC 'C' Channel having PVC Sheet Strip 20 mm wide stuck inside with Solvent Cement for Styles and plain colour PVC Sheet for Top Rail, Lock Rail & Bottom Rail on either side and as gap insert for Top Rail, Bottom Rail Panelling of plain colour PVC Sheet to be fitted in mild steel Frame welded/sealed to the Styles and Rails with suitable Sheet Beading and jointed together with Solvent Cement and fixing in the Frame at Site as per Specification and Drawing of MES Schedule Part-II, complete all as specified and as directed.

S&F for PVC ventilators frame work with multiple chamber hollow PVC section comprising of DWUF 405(40x46mm)(3 mm pin headed glass using extruded PVC section having dia of 0.9x14.5mm EDPM gasket, complete all as specified and directed.

S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Corrugated Steel Sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding, fixed with self tapping screws as specified, complete all as specified and as directed.

S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Plain Steel Sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified and as directed.

M&L for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-410-W(Gde-E-250) quality A, complete all as specified and as directed.

S&F Aluminium anodised Barrel Tower Bolt 150 mm long, Extruded Section and fixed, complete all as specified and as directed.

S&F aluminium alloy 200mm anodised sliding door bolts with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast - aluminium alloy and fixed, complete all as specified and as directed.

S&F Mild Steel Sliding Door Bolt 300mm long, Plate type, stove enamelled black with bright Bolt not less than 12mm dia, minimum 6 Bolts and Nuts 4 on Bolt Plate 2 on Staple Plate and fixed, complete all as specified and as directed.

S&F mild Steel Butt Hinge of size 100mm, medium weight, cold rolled and fixed, complete all as specified and as directed

S&F stainless Steel Butt Hinge of size 100mm, medium weight, cold rolled and fixed, complete all as specified and as directed

S&F Aluminium Handle 150mm long Cast type, complete all as specified and as directed.

Supply & laying Steel Water Tubing 15mm bore (dia), galvanised, ‘medium grade’ with all Fittings, fixed on walls, ceiling or laid in floors or any other situation, complete as all specified and as directed.

All as per Item no.52 here in before but for 20 mm, complete all as specified and directed.

All as per Item no.52 here in before but for 25 mm, complete all as specified and directed.

S&F 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed (as approved) complete all as specified and as directed.

S&F Bib Tap 15mm bore (dia) Fancy Type, Cast Copper Alloy, Chromium Plated with Crutch or Butter-fly Handle, screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed, complete all as specified and as directed.

S&F in repair Bib Tap 15mm bore (dia) Fancy Type, Cast Copper Alloy, Chromium Plated with Crutch or Butter-fly Handle, screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed, complete all as specified and as directed.

S&F Stop Cock 15mm bore, Cast Copper Alloy, screwed down high pressure with Crutch or Butter-fly Handle, screwed both Ends for Iron Pipe or for Unions and fixed, complete all as specified and as directed.

S&F in reapir Stop Cock 15mm bore, Cast Copper Alloy, screwed down high pressure with Crutch or Butter-fly Handle, screwed both Ends for Iron Pipe or for Unions and fixed, complete all as specified and as directed.

S&F PVC Connection Pipe 15mm in size with PTMT Nuts of length 600mm and fixed, complete all as specified and as directed.

S&F in repair PVC Connection Pipe 15mm in size with PTMT Nuts of length 450mm and fixed, complete all as specified and as directed.

S&F 10 litre capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle/push flush type brackets etc complete all as specified and as directed..

S&F in repair PVC valveless syphonic action type flusing cistern low level white with inlet ball valve float and handle including flush pipe of CP brass suitable for IWC/EWC, 10 Ltr capacity complete all as specified and as directed.

S&F vitreous china squatting Orissa pattern Water closet, size 630x450 mm white, with 'P' or 'S' Trap, integral foot rests etc. complete including making good to floor, complete all as specified and as directed.

S&F in repair vitreous china squatting Orissa pattern Water closet, size 630x450 mm white, with 'P' or 'S' Trap, integral foot rests etc. complete including making good to floor, complete all as specified and as directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white incl seat cover of plastic, CP jet and pipe etc complete incl necssary PVC pipe fittings, complete all as specified and as directed.

S&F Pillar Tap 15mm bore (dia), Cast Copper Alloy, fancy type Chromium Plated with Capstan Heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed Shanks and Fly-nuts, screwed for Iron Pipe and fixed, complete all as specified and as directed.

S&F in repair Pillar Tap 15mm bore (dia), Cast Copper Alloy, fancy type Chromium Plated with Capstan Heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed Shanks and Fly-nuts, screwed for Iron Pipe and fixed, complete all as specified and as directed.

M&L for Vitreous china wash hand basin, white, (flat back or angle back) of size 550 mm x 400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia, PVC flexible waste pipe of adequate length and dia and PVC connection 15mm size 450mm length with PTMT nuts, complete all as specified and as directed.

M&L for Vitreous china wash hand basin, white, (flat back or angle back) of size 550 mm x 400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia, PVC flexible waste pipe of adequate length and dia and PVC connection 15mm size 450mm length with PTMT nuts and fixed in repair, complete all as specified and as directed.

S&F 32mm bore dia Waste coupling of PTMT (half or full threaded) minium weight 45 gms), complete all as specified and as directed.

S &F Vitreous china urinals, bowl type flat back size 465 x 355x 265 mm white minimum with grating and union for discharge pipe , complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, complete all as specified and as directed.

S&F urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (miniumum weight 60 gms), complete all as specified and as directed.

S&F in repairVitreous China Urinal, Half stall type,white/ivory (excluding Flushing Cistern, Flush Pipe and Waste Pipe) with Grating and Union for Discharge Pipe complete all as specified and as directed.

S&F PTMT grating Doom 100mm dia (minimum weight 25Grams) complete all as specified and as directed.

S&F PVC (SWR) 75mm bore (dia) Soil, Waste and Ventilating Pipe, Single Socketed, in any length with Rubber Ring Joints, laid in Trenches or in Floors complete all as specified and as directed.

S&F PVC (SWR) 110 mm bore (dia) Soil, Waste and Ventilating Pipe, double Socketed, in any length with Rubber Ring Joints, laid in Trenches or in Floors complete all as specified and as directed.

M&L for 100 mm bore for cast iron Nahani trap with grating incl jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), complete all as specified and as directed.

S&F PVC (SWR) 110 mm bore (dia) Bend any type, and jointing with Solvent Cement , complete all as specified and as directed.

S&F PVC (SWR) 110mm bore (dia) Vent Cowl, jointing with Solvent Cement and fixed, complete all as specified and as directed.

S&F Rotational Moulded Polyethene Water Storage Tank 500 Litre Capacity white in colour (Cylindrical, Vertical with Closed Top), 3 layered, hoisted and fixed in Position all as specified in SSR part-1, complete all as specified and as directed.

S&F Ball Valve 20mm dia (minimum Weight 210 Gram), high pressure of PTMT with epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe and fixed, complete all as specified and as directed.

Supplying, laying and testing of 150 mm internal dia of double wall corrugaed (DWC) high density polythylene pipe (HDPE) and stiffness classes 8 (SN-8) with ISI marked (With CML No ) with and including all fittings & jointing materials for connection of inspection chamber/WC to first manhole of the sewage line complete all as specified and directed.

M&L for Cutting into existing manholes 150mm dia of internal pipe for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and as directed.

M&L for preparing newly plastered surfaces of wall and applying Three Coats of White Wash, complete all as specified and as directed

M&L for preparing old treated/decorated surfaces of Ceiling and applying One Coat of White Wash, complete all as specified and as directed

M&L for preparing new Plastered Surfaces of Walls and applying Two Coats of Cement Base Paint over a coat of primer, complete all as specified and as directed.

M&L for preparing new or previously untreated Steel and Iron Surfaces of any description, over. 10 Cm Width or Girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

M&L for preparing new or previously untreated Wooden Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a coat of Pink Primer, complete all as specified and as directed.

M&L for 25mm thick Cement Concrete 1:2:4, type B-0 (12.5mm graded aggregate), as in Sub-base finishing Concrete Surfaces Even and rough, complete all as specified and as directed.

M&L for Water Proofing Treatment on existing cleaned RCC Roof with the following Specifications, complete.? (a). Priming surfaces and applying normal treatment (for moderate conditions), using glass fibre base bitumen felt grade 2 (except felt) (b). M&L Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq. m over cleaned surface of any description. (c) S&F APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified. (d) M&L Applying two coats of Aluminium Paint over APP based Polymeric Membrane.

M & L for preparing New Surfaces of Walls and applying wall care putty of 1.5 mm thickness over plastered surface to prepare the surface even and smooth and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) and as directed with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and as directed.

M & L for complete removal of existing treatment and applying wall care putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) and as directed with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and as directed..

M&L for preparation of newly plastered surface of wall and appliying two coat of oil bound distemper over a coat of 1.0mm thick wall care putty, complete all as specified and as directed.

M&L for preparation of complete removal of existing treatment of old plastered surface of wall and appliying two coat of oil bound distemper over a coat of 1.0mm thick wall care putty, complete all as specified and as directed.

M&L for Flush Door Shutter 30mm thick, Solid Core Construction with Block Board Core and Plywood face Panels commercial type on both side with Particle Board and fitted to Wooden/steel Chowkat, complete all as specified and as directed.

M&L in repair Second Class Hardwood 30mm thick Glazed and Skelton Shutters, open rebated and prepared to receive Glass, Gauze, etc. (without Sash Bars) edges of Framing plain, chamfered or rounded, mitred beads for screwing Glass, Gauge, etc. sizes of members of Shutter as speci fied in MES Schedule Part-I Section 8, Clause No. 8.24(a) and fitted to Wooden Chowkat, complete all as specified and as directed.

S&F in repair Factory made Solid PVC Door Frame of size 50x47 mm made out of 5.0 mm thick wood grain printed PVC sheet reinforced with Mild Steel Square Tube and edges will be painted to match with printed sheet and fixing in opening as per Specification and Drawing of MES Schedule Part-II, complete all as specified and as directed.

S&F in repair factory made solid PVC moulded door shutter 28-30mm thick(stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain moulded PVC sheet polyurethane painted on the front face and 2 mm plain colour PVC sheet on back face , complete all as specified and as directed.

S&F in repair aluminium (die cast) body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.

S&F in repairs powder coated anodised Aluminium window/ventilator shutters side/top hung type as reqd, aluminium sections weighing 0.55 Kg/Metre with and including provn of stick and seal packings on members of shutters to avoid rattling sound, necessary jointing cleats, glazing clips, rubber neoprene packing , handle 2 nos in each door, aluminium hinges & tower bolts, anodised aluminium snap beading screws etc. including 5 mm thick tinted/pin headed glass, complete all as specified and as directed..

S&F in repairs powder coated anodised Aluminium window shutters of upper half sliding type (4 tracks) and lower half fixed type with opening for installation of AC etc combination of both for glass and fly proofing , aluminium sections weighing 0.55 Kg/m with and including provn of stick and seal packings on members of shutters to avoid rattling sound, necessary jointing cleats, glazing clips, rubber neoprene packing , handles, aluminium tower bolts, anodised aluminium snap beading screws etc. including 5 mm thick tinted/pin headed glass and 0.36mm dia stainless steel wire mesh of 1.4mm avg aperture complete all as specified and as directed.

S&F in repairs powder coated anodised aluminium door shutters with frame aluminium sections weighing 0.55 Kg/Metre including necessary jointing cleats, glazing clips, rubber neoprene packing , handle 2 nos in each door, aluminium hinges & tower bolts, anodised aluminium snap beading screws etc. including 5 mm thick tinted/pin headed glass, complete all as specified and as directed.

M&L for framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290.Gde-E-165 complete all as specified and directed.

S&F Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples and fixed, complete all as specified and as directed.

S&F Ordinary Rat Tail 300mm, Rod Pattern Springs including Roller and Roller Plate and fixed, complete all as specified and as directed.

S&F PTMT grating Doom 125mm dia (minimum weight 40 Grams) complete all as specified and as directed.

S&F in repair PTMT grating Doom 125mm dia (minimum weight 40Grams) complete all as specified and as directed.

S&F in repair Brass Chromium plated Shower Rose 125mm size, with or without Swivel Joints, and fixing to Steel Pipe or Union and fixed, complete all as specified and as directed.

S&F in repair Brass Chromium plated Tubular Towel Rail, 20mm dia, D-type, 60 Cm long between Flanges with Bracket (one Pair) and fixed, complete all as specified and as directed.

S&F in repair PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement,complete all as specified and as directed.

M&L for reinforced Cement Concrete (Nominal Mix) type B1 1:2:4 (20mm graded stone aggregate) as in slab supported on wall,beam and column in floor,roof,landing,balconies,canopies,deck slab and in shelves and the like, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be measured and paid separately under relevant Items.

Taking down carefully Copper/Aluminium Point Wiring (Light, Fan, Socket or Power) of any description on batten/conduit and making good disturbed surfaces of Ceiling, Walls, etc. in Cement Mortar 1:3 and providing Surface Treatment so as to match the existing Finishes, complete all as specified and as directed.

Taking down the existing unservicable main switch/ cut out/ DBs of any type/ capacity/ description as existing at site including making good the disturbed surfaces to match with the existing finishes all as specified.

Taking down old unserviceable/burnt Submain Wiring with copper /aluminum conductor PVC insulated cable of any size drawn through PVC Casing Caping/Conduit including GI Wire Accessories etc. and making good disturbed surfaces of Walls, Ceiling, etc. so as to match the existing Finishes, complete all as specified and as directed.

Taking down the existing unservicable UG cable of any type/ description as existing at site including making good the disturbed surfaces to match with the existing finishes all as specified.

Taking down ceiling fan/Exhaust fan of any sweep, keeping with safe custody and refixing the same with replacement of unserviceable 3 core PVC insulated, PVC sheated 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal, Overhauling the fan, complete all as specified and as directed.

M&L for point Wiring with 1.5 Sqmm Copper Conductor single core PVC insulated Flame Retardant Low Smoke (FRLSH) Unsheathed 1100 Volt grade multi-stranded Cable drawn through and including Rigid PVC Conduit, medium grade, ISI marked of suitable size and its Accessories as required at Site, fixing on surface of Wall, Roof, mounted on Sunk Mild Steel Pressed Terminal Box 1.22mm thick of suitable size duly painted with red oxide metal primer with 3.0mm thick Plastic Laminated Sheet Top Cover for mounting Switches, Sockets, etc. including PVC insulated and unsheathed Single Core multi-stranded Copper Conductor Cable of size 1.5 Sqmm (FRLS) Green in Colour as Earth Continuity Conductor connected to Common Earth and Earth dolly for One Light Point controlled by One 1-Way Switch 5 Amp, complete all as specified and as directed.

All as per item No. 120 here in before for One Ceiling Fan/Exhaust Fan Point controlled by One 1-Way Switch 5 Amp and Regulator, complete all as specified and as directed.

All as per Item no. 120 here in before but or One 3 Pin 5 Amps Switch Socket Outlet Point controlled by One Switch on Same Board, complete all as specified and as directed

All as per Item no. 120 here in before but or One 3 Pin 5 Amps Switch Socket Outlet Point controlled by One Switch on Independent Board, complete all as specified and as directed

All as per item No. 120 here in before but for One Bell Point controlled by One Bell Switch 5 Amp, complete all as specified and as directed.

All as per item No. 120 here in before but for One Light Point controlled by One 2-Way Switch 5 Amp, complete all as specified and as directed.

Description all as per item No 120 here in before but using 2.5 sq mm single core copper conductor cable of multistranded FRLSH PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point incl running of 2.5 sq mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly.

S&F Switch Piano, Flush type, Single Pole, 1-Way, 5 Amps, 230 Volt, conforming to IS and connecting up, complete all as specified and as directed.

S&F Modular switch Piano, Flush type, Single Pole, 2-Way, 6 Amps, 230 Volt, conforming to IS and connecting up, complete all as specified and as directed.

S&F Socket Outlet, 2-in-1, Flush type, multi-purpose, 2/3 Pin, 5 Amp, 230 Volt, conforming to IS and connecting up, complete all as specified and as directed.

S&F Switch Socket Combination 2-in-1, Flush type, multi-purpose, 3 Pin, 6 Amp, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed.

S&F Switch Socket Combination, Flush type, 3 Pin, 16 Amp, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed.

S&F Ceiling Rose, Surface Bakelite of size 65x50mm, 3 Terminals, AC, 50 Hz, 240 Volts, conforming to IS and connecting up, complete all as specified and as directed.

S&F Bell Push, Flush type, 5 Amps, 230 Volt, conforming to IS and connecting up, complete all as specified and as directed.

S&F Buzzer, ding dong, AC 230 Volt, single pole conforming to IS and connecting up, complete all as specified and as directed.

S&F Ceiling Fan Regulator, Step type, Flush type, heavy duty, suitable to work on 230 Volt, AC supply and connecting up, complete all as specified and as directed.

S&F Lamp Holder Surface Bakelite with Back Plate insulated body suitable for Batten/Angle Fittings and fixed with PVC Block, conforming to IS and connecting up, complete all as specified and as directed.

S&F Decorative wall mounted luminaire made out of polycarbonate unbreakable suitable for LED bulb and provosion of LED bulb 10 watts,including taking down old unserviceable one, complete all as specified and as directed.Make- Philips model -comet wall light 30575 or equivalent in havells/surya

S & F LED ADORE 10 W B22 CDL 5 STAR LAMP with B 22 base capacity 1200 lumen complete all as specified and as directed.Make Havells, Cat No: LHLDEUEBML8Z010 or equivalent in CG / Philips.

S & F sheet metal enclosure MCB VTPN 4 way Double door Ready to use DBs - Provided with insulated vertical phase bus-bars |neutral bar/s with shroud/s | earth bar/s | sticking saddles | cement spill protector | color-coded interconnecting wire set | cable ties | blanking plates and circuit identification labels With provision for 4 Pole MCCB 125 A as incomer and SP/SPN MCBs as outgoing complete all as specified and directed.Make :Model:- DBVTL004SD, Make L&T or equivalent in legrand/Indo Asian.

S & F MCCB 4 Pole 415volt, 125 Amps, thermal magnetic type DN0-100D with breaking capacity 36 KA and with adjustable overload setting, complete all as specified and as directed.. Make: L&T Cat part No. CM91712OOKOOG or equivalent in legrand / Indo Asian.

S & F sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system complete including removal of old unsv sheet metal enclosure all as specified and as directed.. Make :-L&T model No. DBSPN008DD or equivalent in Legrand/Havells.

S & F bulk head in die cast aluminium housing and frosted glass suitable for 1x8W LED, complete all as specified and as directed. Make :RUGBY Model:- LHKL01160099 or equivalent in Surya/Havells/CG.

S&F pre-wired double door MCB DB made out of 18 SWG CRCA steel sheets, phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal blocks for incoming and outgoing circuits, inbuilt loose wire box, ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP 240 volts 200 Amps rated bus bar, 4 way double door openable complete all as specified and as directed.

S&F MCB Double Pole, 32 Amps, 240/415 Volt for fixing on MCB DB’s, 10 kA,c curve 50 Hz, conforming to IS/IEC 60898 and connecting up, complete all as specified and as directed.(Make- L&T, Cat No: BB20320B, BB20320C or equivalent in Schinder/Legrand.)

S&F MCB SP,6 Amps, 240 Volt for fixing on MCB DB’s, 10 kA,c curve 50 Hz, conforming to IS/IEC 60898 and connecting up, complete all as specified and as directed.(Make- L&T, Cat No:BB10060B or equivalent in Schinder/Legrand.)

S&F MCB SP,6 Amps, 240 Volt for fixing on MCB DB’s, 10 kA,c curve 50 Hz, conforming to IS/IEC 60898 and connecting up, complete all as specified and as directed.(Make- L&T, Cat No: BB10060C , BB10100C, BB10160C or equivalent in Schinder/Legrand.)

S & F wall mounted LED 18 watts , box type (decorative) light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 4' x 18 watts complete all as specified and as directed. Make-Model -REGALBATTENT5UPTO1X18WDSBSWH For Batten Fitting and Model-PHOTONULTRAE2.01213T8SSTL18WLED865SPC For T8 Tubelight.

S & F wall mounted LED 10 watts , batten type T5 mirror light fitting (Warm light), 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements ,provision of new 3 core multistranded copper conductor of size 23/0.193 from celing rose to fitting, complete all as specified and as directed.

S & F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and PC cover having top opening seperate driver compartment with IP 66 protection and impact resistance of IK07 with electronic driver of capacity 15 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete all as specified and as directed.Make-Havells,Model No - ENDURAPEARLSL15WLED757SASYTOPCMP or equivalent in CROMPTON/SURYA/BAJAJ.

S & F wall mounted LED 18 watts , box type (decorative) light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 4' x 18 watts complete all as specified and as directed. Make-Havells, Model -REGALBATTENT5UPTO1X18WDSBSWH For Batten Fitting and Model-PHOTONULTRAE2.01213T8SSTL18WLED865SPC For T8 Tubelight or equivalent in Crompton/Surya.

S & F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and PC cover having top opening seperate driver compartment with IP 66 protection and impact resistance of IK07 with electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete all as specified and as directed.Make-Havells,Model No - ENDURAPEARLSL25WLED757SASYTOPCMP or equivalent in CG/PHILIPS/GE.

Supply & laying LT UG XLPE sheathed PVC insulated, screened PVC bedded, Galvanised Steel Strip of Wire armoured Electric Power Cable heavy duty with stranded Aluminium Conductor 1100 Volt grade, cross-sectional area 16 Sqmm 2.0 Core, laid in trenches/surface of Wall/in GI Pipe along with Pole for connec-tion to OH Lines including Brass Cable Glands Mild Steel Flat Iron Clamps, etc. and Testing, complete all as specified and as directed. NOTE : Earthwork, Sand Cushioning, Bricks, GI Pipe, etc. will be measured and paid under appropriate Items.

S&F Sub-Class ‘B’ Brick, well burnt, laid breadthwise along the length of Cable laid in trenches over Sand Cushion laid for UG Cable Protection, complete all as specified and as directed.

M&L Sand Cushioning (dry) in trenches/ducts for protection of UG Cables (below, above and around the UG Cable laid in Trenches) of 23 Cm Spread thickness (8 Cm in depth before laying the Cable and 15 Cm in depth after lay-ing the Cable) and consolidated (punned) upto 180mm thickness, complete all as specified and as directed. NOTE: For the purpose of Payment, Punned thickness of Sand Cushioning only shall be measured and paid for.

S&F Galvanised Iron Pipe 40mm bore (dia), Light grade as in protection of UG Cable laid in Trenches/fixing with Poles with Mild Steel Flat Iron Clamps, complete all as specified and as directed. NOTE: Cost of Mild Steel Clamp, Nuts, Bolts and painting is deemed to be included in the QUOTED UNIT RATE.

S&F Galvanised Iron Pipe 50mm bore (dia), Light grade as in protection of UG Cable laid in Trenches/fixing with Poles with Mild Steel Flat Iron Clamps, complete all as specified and as directed. NOTE: Cost of Mild Steel Clamp, Nuts, Bolts and painting is deemed to be included in the QUOTED UNIT RATE.

S&F heavy duty exhaust fan 300 mm sweep MS body, 3 wing 1400 rpm, single phase 240 volts copper wounds complete with all accessories as louvers shutters etc incl making connection through 3 core PVC coper wire run through flexible pipe. Single phase type.

M&L for earthing complete with Galvanised Steel Earth Plate Electrode 600x600x6mm, buried directly in ground vertically to a depth not less than 2.25 Metre below ground level with Top Edge of Earth Plate at depth not less than 1.50 Metre below normal ground level, connected to Galvanised Earth Lead Wire 4.0mm dia by means of Bolts, Nuts, Check, Nuts and Washers of Galvanised Iron or Steel and Earth Wire protected with and including GI Pipe 15mm bore (dia) ‘light grade’ upto 1.0 Metre above the Floor Level of Building where Main Switch/ DB situated, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt in alternate layers of not exc. 150 mm thick, PCC Pit in Cement Concrete 1:3:6 (20mm graded aggre gate) and Pre-cast RCC Cover Slab of size 350x350x50 mm in Cement Concrete 1:2:4 (20mm graded aggregate), reinforced with 8.0mm dia TMT Bars @ 100mm Centre to Centre in both ways, GI Wire Mesh, Funnel with GI Watering Pipe 20mm bore (dia) ‘medium grade’ including necessary Excavation in Soft/Loose Soil, Returning, Filling in and Removal of surplus Spoil upto a distance of 50.00 Metre and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing on Completion including removal old existing unserviceable Earthing, complete all as specified and as directed.

S&F 3 layered(Outer green coloured UV stabalized,middle black coloured UV stabalized and inner most layer white coloured with antimicrobial property) PP-R (Polypropyelene random copolymer) pipe 63mm outer dia,ISI marked,SDR 7.4 and SDR11 UV stabalised and antimicrobial fusion welded having thermal stabality for hot and cold water supply all PP-R plain and brass threaded polypropyelene random fittings and laid in treanches, complete all as specified and directed.

S&F 3 layered(Outer green coloured UV stabalized,middle black coloured UV stabalized and inner most layer white coloured with antimicrobial property) PP-R (Polypropyelene random copolymer) pipe 40mm outer dia,ISI marked,SDR 7.4 and SDR11 UV stabalised and antimicrobial fusion welded having thermal stabality for hot and cold water supply all PP-R plain and brass threaded polypropyelene random fittings and laid in treanches, complete all as specified and directed.

S&F 3 layered(Outer green coloured UV stabalized,middle black coloured UV stabalized and inner most layer white coloured with antimicrobial property) PP-R (Polypropyelene random copolymer) pipe 32mm outer dia,ISI marked,SDR 7.4 and SDR11 UV stabalised and antimicrobial fusion welded having thermal stabality for hot and cold water supply all PP-R plain and brass threaded polypropyelene random fittings and laid in treanches, complete all as specified and directed.

S&F PP-R gate valve (Brass insert) 32mm outer dia and fixed including taking down of existing unserviceable one, complete all as specified and directed.

S&F PP-R gate valve (Brass insert) 50mm outer dia and fixed including taking down of existing unserviceable one, complete all as specified and directed.

M&L for connection of PP-R distribution branch with PP-R main of 63 mm size by providing and fixing tee of 40x32 mm including cutting and making fusion joint etc, complete all as specified and directed.

M&L for connection pieces for insering 63 mm pp-r pipe into 80mm distribution mains, complete all as specified and directed.

M&L for connection of PP-R distribution branch with PP-R main of 63 mm size by providing and fixing tee of 63x32 mm including cutting and making fusion joint etc, complete all as specified and directed.

Supply & Laying LT heavy duty UG Cable of size 35 Sqmm 3.5 Core laid in trences /floor/on wall/service connection XLPE Insulated, sheathing and armd 1100 Volts grade with aluminium conductor including connection to the main switch/cut out MCB/MCCB with necessary lugs after cutting to required length complete all as specified and directed.

M&L for Sub-main Wiring with 2-Runs of Single Core 6.0 Sq mm PVC insulated unsheated multi-stranded 1100 Volts grade with Copper Conductor drawn through and including Non-metalic PVC Rigid Conduit heavy duty ISI marked and its Accessories including 1-Run of Single Core 6.0 Sq mm PVC insulated unsheated multi-stranded 1100 Volts grade with Copper Conductor Cable as Earth Continuty Conductor along with the Wiring and connected from DB to DB/Main Board, complete all as specified and as directed. NOTE :- (a) Cost of PVC Conduit with all Fittings/Accessories will deem to be included in the Quoted Unit Rate. (b) Cables as mentioned in Schedule ‘A’ Items and 1-Run of PVC Conduit with all Fittings/Accessories will be measured and paid as One Unit. (c) Sub-main Wiring will be measured PVC Conduit only. Wire required for looping, etc as ordered will deem to be included in the Quoted Unit Rate.

Supply and fix SPN Enclosure with 2 Pin and Earth Plug and Socket with 230/240 Volts, 20 Amp SPN MCB, complete all as specified and as directed.

Boring holes horizontally under Road without damaging the surface of Road of any type (minimum 1.0 METRE below the Road Surface with the help of GI Tubing not exc. 40 mm bore (dia) for passing of UG Cable, complete all as specified and as directed.

Cutting of existing CI/DI pipe laid 80 mm dia for inserting Tees for new connection of 80x63 mm diacomplete all as specified and as directed.

R D ENTERPRISE

M/S Singha Enterprise

shree kamakhya traders

BEE KAAY TRADERS

M/S Yadav Corporation