REPAIR MAINT OF STREET LIGHT PANNEL AND STREET LIGHT, SOLAR LIGHT, JN BOX GATE LIGHT AND ITS ALLIED ITEMS AT VARIOUS LOCATION UNDER GE RAMGARH CANTT

Taking down / dismantling unserviceable Street/Security light/Post top lantern light fitting of any wattage or size from existing electric poles or bldg for replacement of unserviceable lights for taking credit to the contractor complete all as specified and directed.

M&L for LED streetlight 45 Watt made up of pressure die cast housing with toughened glass and high power LEDs with secondary optics with IP65 protection including connecting in existing circuit with flexible aluminium conductor of size 2 core 2.5 sqmm of 2 mtr long complete all as specified and directed.

M&L for LED street lights 60 Watt, aerodynamically designed for all weather conditions with excellent thermal management, made up of pressure die cast housing with toughened glass and high power LEDs with secondary optics and IP66 protection of including connecting in existing circuit with flexible aluminium conductor of size 2 core 2.5 sqmm of 2 mtr long complete all as specified and directed.

M&L for LED street lights 90 Watt, aerodynamically designed for all weather conditions with excellent thermal management, made up of pressure die cast housing with toughened glass and high power LEDs with secondary optics and IP66 protection of including connecting in existing circuit with flexible aluminium conductor of size 2 core 2.5 sqmm of 2 mtr long complete all as specified and directed.

S&F for New generation, IP 65 LED post-top lantern lights of 25 Watt, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source including testing complete all as specified and as directed.Make: Havells/Surya/Crompton.

M&L for Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP66 flood light, 120W suitable for high mass lighting including connecting in existing circuit with flexible aluminium conductor of size 2 core 2.5 sqmm of required at site including taking existing flood light all as specified and directed.

S&F in repair LED bollard with opal diffuser and aluminum reflector capacity 10 watt including all fixing arrangments as required and PCC work of suitable size complete all as specified and directed . Make : PHILIPS/ Surya/Bajaj

S&F in repair 40/32 mm dia bore galvanize iron pipe light grade, bent to shape of length 1.50 mtr fixed with flat iron clamp of size 50 mm x 6 mm nuts and bolts of 12 mm dia 100 mm long including washer duly painted with two coat of synthetic enamel paint over a coat or red oxide primer on exposed surface of mild steel surface including preparation of surface including and fixing on pole /wall complete all as specified and directed

Supply and laying or fixing or passing through pipe, XLPE insulated, armoured heavy duty electric cable with aluminium conductor,1100 volts grade, cross-sectional area 4.0 sq. mm two core nominal cross section in stranded conductor including testing and taking down of existing cable complete all as specified and directed.

Supply and laying or fixing or passing through pipe, XLPE insulated, armoured heavy duty electric cable with aluminium conductor,1100 volts grade, cross-sectional area 10 sq. mm two core nominal cross section in stranded conductor including testing and taking down of existing cable complete all as specified and directed.

Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.5 metre in depth for cable trenches and getting out in soft / loose soil complete all as specified and as directed by the Engineer-in-Charge.

Returning, filling in trenches including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft / loose soil complete all as specified and as directed by the Engineer-in-Charge.

Removing excavated materials to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point all as specified and as directed by the Engineer-in-Charge.

M&L for Sub class "B" bricks laid dry width wise across the line of cable in trenches as cable protection complete all as specified.

Supply and spreading clean, dry, fine river sand for under ground electric cable in two layers (8cm thick before laying of cable & 15cm thick after laying cable to a total of 23cm) including gentle punning the sand upto 18cm (total thickness) and consolidated around cable for protection of UG cable complete all as specified and directed. NOTE:- For measurement purpose punned thickness shall be considered as per clause 19.75 of SSR Part-I.

Supply and laying in replacement of GI pipe 50 mm dia light grade with all necessary fittings for cable protection on pole complete all as specified and as directed.

M&L for painting to existing steel tubular LT poles, 9m long including cross arms, channels, angle iron support, bracings, clamps etc. with one coat of aluminum paint superior quality of approved make on surfaces exposed to view and making 30cm wide strips (total 5 Nos) with yellow and black paint alternately on external surface above PCC benching including preparation of old painted surfaces by scraping etc complete and writing pole numbers. of 2 inches bold letters with black paint after painting, complete all as specified & directed.

S&F in repair moulding compound ( SMC ) box street light junction box of size 205 mm x 255 mm x 112mm complete with shock and rust proof, termite resistant, tamper proof , front openable type including suitable provision for three phase, four wire cable (size upto 25 Sqmm 4 Core) incoming & outgoing loop -in loop out connection and including one no.of MCB SP 6 Amp and non metallic clamps , GI nut bolts and washers of suitable size and fixed on pole / wall complete all as specified . Make : Sintex /Hensel/ABB.

S&F in repair PVC insulated unsheathed cable of size 2.5 Sqmm 2 core for replacement of existing worn out/burnt cable on street light/security light by spiral hanging of wire for connectons from junction box to street light complete all as specified and directed.

S&F in repair Rigid non-metallic PVC conduit 20/25mm dia exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and such as couplers, lock nuts, saddles, pipe hooks etc.

S & F in repair 415 volt, 10KA 'B' curve miniature circuit breaker (MCB) of tripple pole & neutal (TPN) and current carrying capacity 40 amp in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.

S&F in repair , Digital time switch, with night sensor type with progranmming using captive segments with 24 hrs timing setting AC 230 V. AC contractor, (relay) 230 V , 40 Amps including 4 module wether proof cabinate IP-65 protetion complete all as specified and as directed.

Supply, installation, testing and commissioning of 30 W semi integrated solar street lights (solar LED fixture with inbuilt battery and MPPT charge controller and separate solar panel) made up of aluminium Extrusion housing (Battery charge controller and LED module should be integrated inside luminaries) along with minimum 100Wp monocrystalline panel fixed on the top of pole separately, maintenance free 12.8 V - 24 Ah LiFePo4 battery along with BMS (BIS certification required) with minimum cycle life of 2000 cycles, MPPT charge controller with Efficiency less than 90%. Luminaries should have an intelligent Pre-Programmed dimming profile suitable to provide 2 days backup. Luminaries should have IP-65 for all critical components, IK07 and have lumen output of greater than 4800 lumens /watt) as LM79 from NABL accredited Lab The LED chip used should be of Osram, Lumileds, and should be with lenses for effective light distribution. Solar Panel, MPPT charge controller and luminaries should be manufactured in India only The solar lighting company must have in house NABL accredited lab to justify luminaries system efficacy. Luminaries must have Green & Red indicator lights for showing charging of battery and low battery voltage respectively. Light fixture must also have protection like over charged protection, Deep discharge protection over voltage protection The solar lighting companies must have toll free base service network to provide immediate after sales services networks available in different districts of the state Approved fixing wth suitable pipe and PCC Make- Havells/ Philips/ Bajaj as per approval of Engineer in charge including taking down exisiting solar street light complete all as specified and as directed. comprising following items:- (a) Solar Panel (b) Battery 12 V (c) LED Solar light Note:- fixing pipe and PCC rate will be included in qoted rate.

S&F in repair LED driver 75 watt, single Phase , 240 V , make : Crompton Havells, Phillips for LED street light fitting complete all as specified and directed by Engineer-in-Charge.

S&F in repair LED driver 45 watt, Phase , 240 V , make : Crompton, Havells, Phillips for street light fitting complete all as specified and directed by Engineer-in-Charge.

S&F in repair LED driver 25 watt, single Phase , 240 V , make : Crompton Havells, Phillips for LED street light fitting complete all as specified and directed by Engineer-in-Charge.

M&L for repairing LT feeder box/ panel and their doors, inner compartments etc by denting/ welding where required and cleaning, removing old paint by paint remover/scrappers for any number of coats, any width or girth and applying two coats of synthetic enamel paint by spray painting, inside and outside of panels(second coat shall be applied at the interval of one day) of the approved colour, complete all as specified and directed.

Please Enable Macros to View BoQ information