CONSTRUCTION OF VOCATIONAL LAB FOR PM SHRI KV NO. 01 AT AF STATION HALWARA UNDER GE (AF) HALWARA

Amount

Surface dressing not exc 15 cm deep in soft/loose soil complete all as specified and directed by Engineer-in-Charge.

Excavating over areas, n exc 1.5m deep and getting out in any type of soil complete all as specified and directed by Engineer-in-Charge.

Material and labour for providing plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation and mass concrete complete all as specified and directed by Engineer-in-Charge.

Material and labour for hardcore of broken bricks of gauge n exc. 63 mm, deposited, spread and levelled and compacted in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engineer-in-Charge.

Material and labour for cement concrete M-25 design mix (using 20mm graded aggregate) for foundations, including rafts, footings, foundations beams, plinth beams, bases for columns etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for cement concrete M-25 desigh mix (using 20mm graded aggregate) for columns, pillars, piers, post and strut complete all as specified and directed by Engineer-in-Charge.

Material and labour for cement concrete M-25 desigh mix (using 20mm graded aggregate) for beams, cantilivers, beressummers, lintels over 1.5m span, chajja complete all as specified and directed by Engineer-in-Charge.

Material and labour for cement concrete M-25 desigh mix (using 20mm graded aggregate) for slab supported on walls, roof beams and columns in floors, roofs, landings, balconies, canopies, deck slab and in shelves and this like complete all as specified and directed by Engineer-in-Charge.

Material and labour for formwork to sides of concrete, foundations, footings, bases of columns, rafts and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work for rough finished surface complete all as specified and directed by Engineer-in-Charge.

Material and labour for formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished complete all as specified and directed by Engineer-in-Charge.

Material and labour for formwork to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, chajja, cantiliver shelves etc. for rough finished complete all as specified and directed by Engineer-in-Charge.

Material and labour for formwork to soffits of suspended slabs such as roof slabs, floors slabs, landings and similar work not exceeding 200mm thick (horizontal or sloping) for fair finished surface complete all as specified and directed by Engineer-in-Charge.

Material and labour for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete raillings, opening in concrete walls, floors and roofs n exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm etc. for fair finished surface complete all as specified and directed by Engineer-in-Charge.

Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns,footing, plinth beam, roof beam, lintels, slabs and other similar structures etc., hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips ccomplete all as specified and directed by Engineer-in-Charge.

Material and labour for mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for brickwork with fly ash modular bricks, straight or curved on plan exc 6m mean radius, built in in CM 1:6 complete all as specified and directed by Engineer-in-Charge.

Material and labour for rendering 15mm thick on cement mortar 1:4 finished fair faces of brick/concrete surfaces even and fair without using extra cement complete all as specified and directed by Engineer-in-Charge.

Material and labour for rendering 10 mm thick cement plaster in CM (1:6) on fair faces of brick or concrete surfaces and finishing the surface even and fair etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for rendering 5 mm thick cement plaster in CM (1:3) on fair faces of concrete surfaces in ceiling complete all as specified and directed by Engineer-in-Charge.

Material and labour for prepration of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed by Engineer-in-Charge.

Material and labour for applying 1-2 mm thick wall care putty on walls including making surface even and smooth using sand paper before applying priming coat complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of new plastered or unplastered surface of walls applying two coat of distemper oil emulsion over one coat of primer complete all as specified and directed by Engineer-in-Charge.

Material and labour for newly plastered surface of walls including corners and applying two coats of 100% Premium exterior acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm complete all as specified and directed by Engineer-in-Charge.

Material and labour for 75 mm thick cement concrete type D-2, 1:4:8 (40 mm graded stone aggregate) as in sub base, below paving, floors, paths etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for 75 mm thick cement concrete type C-2, 1:3:6 (40 mm graded stone aggregate) as in plinth protection complete all as specified and directed by Engineer-in-Charge.

Material and labour for Vitrified tiles 10 mm thick dark shade (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM (1:4) for laying floor finishes complete all as specified and directed by Engineer-in-Charge.

Material and labour for Vitrified tiles 10 mm thick dark shade (square/ rectangular) on vertical surfaces as in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick cement plaster in CM 1:4 to receive vertical tiles complete all as specified and directed by Engineer-in-Charge.

Material and labour for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over 15mm thick screed bed of CM 1:4 including rubbing and polishing complete all as specified and directed by Engineer-in-Charge.

Material and labour for machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and cement slurry including 10mm thick cement plaster 1:3 CM to receive kota stone and jointed rubbing and polishing complete all as specified and directed by Engineer-in-Charge.

Material and labour for granite 18-20mm thick of any type (table rubbed and polished in steps, jambs pillars, window cill, cooking platform and like in cement mortar 1:4 including pointing in white cement complete all as specified and directed by Engineer-in-Charge.

Rounding the edge of stone slabs one edge such as in steps, cooking platforms and the other simmilar situation complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of Pressed steel frames of size 105 X 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for PCC (1:3:6) type C-1 using 20 mm graded aggregate as in back of pressed steel chowkhats etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for 35mm thick of 2nd class hard wood plain framed factory made panelled shutters (any number of pannel) with panel of timber flat on both side (feathered edged) or of 12mm thick veneered particle boards with commercial faces vineers. Complete incl fixed to chowkhat the size of rails and styles as per IS 1003 or as described in SSR Part-I kiln seasoned and chemically preassure treated complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of 150 Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of extruded Aluminium handles, cast type, anodised of size 150mm complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of powder coating sliding aluminium window of three tracks shutters inluding frame (two glass shutter and one mesh shutter) side hung/ fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, zing clips rubber neioprene packing, anodised aluminium snap beading screws anodised aluminium fittings such as clips, handles etc complete all as specified and directed by Engineer-in-Charge.(minimum thickness of powder coating 50 micron) Note : Unit rate quoted by contractor includes rate of glass, wiremesh and all other accessories.

Supply and fixing of 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of new untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of PVC (SWR) pipes of 110 mm dia, single socketed fixed to walls complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of PVC (SWR) bends of 110 mm dia, any radius complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of 20 mm dia stainless steel polished 204 grade drapery rod/ curtain rod 1 to 2mm thick with finals decorative, including fixing of brackets and both ends decorative knobs complete all as specified and directed as per approved sample by Engr-in-Charge.

Supply and fixing of ceramic counter sunk wash basin white oval ceramic glossy finish scratch resistant anti-bacterial easy clean size 550 x 400mm excluding waste chain and plug and porcelain stopper but including brackets cutting for and pining in ends of brackes or erecting stand, fancy type pillar taps cast copper alloy chromium plated of 15mm bore, waste coupling and waste pipe (including corner type if required) as per sample approved complete all as specified and directed by Engr-in-Charge.

Material and labour for treating the bottom and sides of excavation at the rate of 5 ltrs of emulsion per sqm of surface area complete all as specified and directed by Engineer-in-Charge.

Material and labour for treating the back fill in contact with foundation at the rate of 7.50 ltr of emulsion per sqm of vertical surface complete all as specified and directed by Engineer-in-Charge.

Material and labour for treating the top surface of filled earth at the rate of 5 ltr of emulsion per square meter of surface area complete all as specified and directed by Engineer-in-Charge.

Material and labour for treating the soil under plinth protection at the rate of 5 ltr of emulsion per square meter of surface area complete all as specified and directed by Engineer-in-Charge.

Material and labour for treating the soil along with external perimeter of building at the rate of 2.25 ltr of emultion per meter of the perimeter wall complete all as specified and directed by Engineer-in-Charge

Material and labour for roughening surfaces of concrete slab by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for brushing neat cement slurry with 3.0 Kg of cement per sqm complete all as specified and directed by Engineer-in-Charge.

Material and labour for providing cement concrete type B-1 (1:2:4) 20 mm graded stone aggregate for providing slope, roof kerbs or mud stops, MH kerbs, rounded or chamfered on edges rounded or chamfered edges complete all as specified and directed by Engineer-in-Charge.

Material and labour for 10mm thick screed bed or bedding layer in cement mortar 1:4, laid on roof, mixed with water proofing compound when concrete is green, as per manufacturere instructions complete all as specified and directed by Engineer-in-Charge. Note : Water proofing compound shall be measured and paid separately.

Supply only integral water proofing compound, ISI marked complete all as specified and as directed.

Material and labour for APP based polymeric membrane of minimum 3 mm thick and minimum weight not less than 3.0 Kg/sqm, reinforced with polyster non woven fabric matt (weight not less than 150 gm/sqm), laid with forced application over roof surface with a coat of hot blown bitumen conforming to IS-3384-1965 of grade 85/25 @ 1.2 Kg/Sqm at bottom of the membrane as bonding material, complete all as per manufacturer's instructions all as specified and directed by Engineer-in-Charge.

Supply and fixing of factory made 18mm thick 100% solid WPC plain board for frames and shutters of required size comprising of virgin PVC resin of K value (suspension grade, calcium carbonate and natural fibres (wood powders/rice husk/wheat husk) and non toxic additives, made from Extrusion process WPC foam sheet single extruded inner with density not less than 650kg/Cum an ISO 9001-2015 certified company, having good screw hold in capacity (screw withdrawl strength of 2000N face and 1100N edge, minimum compressive strenth of 50N/ sqmm, modulus of elasticity 850 N/Sqmm and resistance of spread of flame of class A category with property of being Termite free/ water/moisture proof, fire retardant and fixing with SS butt hinges of required size with necessary full body threaded star headed counter sunk SS screws. All as per direction of Engr-in-Charge, material test certificate and authentication should be compulsory provided by he manufacturig company for WC/ Bathroom/ Toilet/ Kitchen/ balcony doors & cabinets.18 mm thick PVC ply of Plain color fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete all as per specifications and as directed by the Engineer‐in‐Charge.

Supply and fixing of stainless steel handles 100 mm size for kitchen cabinet shutters complete all as specified and directed by Engineer-in-Charge.

Material and labour for Continous piano hinges stainless steel, bright finish width of flaps when open 40 mm complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of Hasp and staple safety type aluminium powder coated with mild steel pin inculding bolt to hinge plate and fix with screws 150 mm size of hasps and staples complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of Magnetic catcher for cupboards complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of 1000 ltr rotational moulded three layered polyethylene water storage tank (cylindrical vertical with closed top) hoisted including 20mm ball valve, all required fittings and fixed in position complete all as specified and directed by Engr-in-Charge.

Supply and fixing of CPVC pipe outer dia 25mm SDC 11 & plain CPC SDR 11 fittings in trenches complete etc fixed to walls, floors & ceilings including cuttings and chases complete all as specified and directed by Engr-in-Charge.

Supply and fixing of CPVC pipe outer dia 32mm SDC 11 & plain CPC SDR 11 fittings in trenches complete etc fixed to walls, floors & ceilings including cuttings and chases complete all as specified and directed by Engr-in-Charge.

Material and labour for hard core of broken bricks of gauge exe 63 mm deposited spread and leveled in layers not exc 15cm thick watered and rammed to a true surface complete all as specified and directed by Engineer-in-Charge.

Material and labour for machine pressed precast concrete interlocking paver block rubber finish with grey cement and pigment of any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade complete all as specified and directed by Engineer-in-Charge.

Material and labour for sand filling under floor or foundation (40mm thick ) including watering and ramming complete all as specified and directed by Engineer-in-Charge.

Material and labour for cement concrete type B-1, 1:2:4 (20 mm graded agg.) as in benching end interlocking paver blocks complete all as specified and directed by Engineer-in-Charge.

Material and labour for concrete bed to drain pipes 150mm bore using cement concrete type C-2 1:3:6 including packing under and haunching against the sides of pipes after they are laid and tested in complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of reinforced cement concrete pipe 150mm bore, class NP-3 laid in trenches and jointed complete all as specified and directed by Engineer-in-Charge.

Material and labour for Plain cement concrete type B-1 1:2:4 (20mm graded stone aggregate) in copings complete all as specified and directed by Engineer-in-Charge.

Material and labour for brick work with sub class `B' bricks, straight or curved on plan exc 6m mean radius, built in cm 1:6 using old size bricks complete all as specified and directed by Engineer-in-Charge.

Material and labour for rendering 15mm thick on external surface of brick or concrete surfaces in cement mortar 1:4 is to be finished even and smooth (without using extra cement) using water proofing compound complete all as specified and directed by Engineer-in-Charge. Note : WPC shall be measured and paid separately under respective item.

Material and labour for providing precast cement concrete type B-1 1:2:4 (20mm graded stone aggregate) set in cement mortar 1:4 as in cover slabs for manholes complete all as specified and directed by Engineer-in-Charge.

Cutting holes in brick walls in mud mortar for inserting MH pipe and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required exc one brick but not exc two bricks complete all as specified and directed by Engineer-in-Charge.

Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in soft / loose soil complete all as specified and directed by Engineer-in-Charge.

Removing excavated soil exc. 250m but n exc 500m and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and directed by Engineer-in-Charge.

Supply and laying of GI tubing 25mm bore medium grade with all fittings like socket, union, elbow, bend, tee etc jointed and laid in trenches complete all as specified and directed by Engineer-in-Charge.

Supply and laying of GI tubing 20mm bore medium grade with all fittings like socket, union, elbow, bend, tee etc jointed and laid in trenches complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of 25 mm dia Gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of 20 mm dia bib tap, brass chromium plated, screwed down in pipe complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of 20 mm dia ball brass valves high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed by Engineer-in-Charge.

Material and labour for drilling and tapping cast iron/ ductile iron/ GI water mains (in each position) for branch connection of the internal dia of 25mm bore complete all as specified and directed by Engineer-in-Charge.

Material and labour for concealed Point wiring using proper colour coding complete with 1100 Volts grade 1.5 Sqmm, single core, PVC insulated, unsheathed cable with multistranded copper conductor with ISI mark FRLS grade, conforming to IS-694 in and including PVC medium grade conduit not less than 20mm dia. ISI marked with all accessories concealed in wall/ ceiling/ floor /roof etc. including fittings shunk in MS pressed steel terminal boxes suitable depth and 1.6mm thick (duly painted with two coat of anti- corrosive paint outside and aluminum paint inside) with top cover 2.8mm thick hylem sheet cover for mounting switches/ sockets and fan regulators etc including 1.5 Sqmm PVC insulated, unsheathed, multistranded copper conductor, FRLS 1100 volts grade (green colour) as earth wire, connected to common earth dolly for :- Note : Cost of cutting of chases wherever required in walls/ floors is deemed to be included in the unit rate.

All as per Srl Item No. 82.00 but one light point controlled by one switch.

All as per Srl Item No. 82.00 but one fan point controlled by one switch.

All as per Srl Item No. 82.00 but one exhaust fan controlled by one switch

All as per Srl Item No. 82.00 but 4.0 Sqmm copper conductor wiring with 2.5 Sqmm copper conductor as earth continuity for 15 Amp switch socket combination on independent board complete all as specified and directed by Engr-in-Charge.

Supply and fixing of Switch piano, one way 5 Amp, 240 Volt complete all as specified and directed by Engr-in-Charge.

Supply and fixing of Switch piano, flush type single pole, one way 15 Amp, 240 Volt complete all as specified and directed by Engr-in-Charge.

Supply and fixing of Socket outlet 2 in 1, 6 pin, 5 and 15 amp, 240 Volt multi purpose flush type complete all as specified and directed by Engr-in-Charge.

Supply and fixing of stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd complete all as specified and directed by Engr-in-Charge.

Supply and fixing of ceiling rose surface bakelite 65x50mm with three terminals complete all as specified and directed by Engr-in-Charge.

Supply and fixing of LED light fitting 20 W, 4 ft long, 230 Volt, wall mounted LED batten, extruded aluminium heat sink provided for efficient haet dissipation & integrated electronic driver complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

Supply and fixing of BLDC type ceiling fan copper winded complete with all accessories, 5 star rated, 1200 mm sweep, colour white and including having hook arrangement where as not available, electric connection complete all as specified and directed by Engr-in-Charge.

Supply and fixing of heavy duty exhaust fan 300 mm sweep, turbo force 1400 RPM, single phase, totally enclosed heavy duty motor with copper winding including mounting brackets fixing on frame complete and including MS sheet 1.00 mm thick, louver shutter for exhaust fan suitable size and making hole and making good to facing where required and pointing in cement mortar 1:3 to ends or edges, packing with wire mess with outer side of exhaust hole with all accessories complete all as specified and directed by Engr-in-Charge.

Supply and fixing of TPN vertical load line DB 4 way with 200 Amp bus bar 415 Volt, sheet metal enclosure suitable for incomer MCCB 4 Pole including suitable dummy plate single pole complete all as specified and directed by Engr-in-Charge.

Supply and fixing of MCCB 4 Pole, 415 Volt, fixed thermal and fixed magnetic setting of capacity 63 Amp, 36 KA complete all as specified and directed by Engr-in-Charge.

Supply and fixing of MCB TPN, 40 Amp, 415 Volt, 50 Hz complete all as specified and directed by Engr-in-Charge.

Supply and fixing of submain wiring with 2 X 4 sqmm (nominal area) PVC insulated FRLSH, unsheathed, multistrand, 1100 volts grade copper conductor cable single core drawn through in and including non metalic PVC concealed conduit not less than 25mm dia heavy duty and its accessories including one run of 4 sqmm PVC insulated copper conductor continuous earth wire and making good disturbed surface of wall/ floor etc complete all as specified and directed by Engr-in-Charge.

Supply and fixing of submain wiring with 2 X 6 sqmm (nominal area) PVC insulated FRLSH, unsheathed, multistrand, 1100 volts grade copper conductor cable single core drawn through in and including non metalic PVC concealed conduit not less than 25mm dia heavy duty and its accessories including one run of 6 sqmm PVC insulated copper conductor continuous earth wire and making good disturbed surface of wall/ floor etc complete all as specified and directed by Engr-in-Charge.

Supply and fixing of Sheet metal enclosures MCB TPN distribution board, 4 way, double door with IP-66 protection single phase 415 Volt including suitable size copper bus bar and neutral link, fixed flush concealed in wall including chases wall for fixing DB and making good disturbed wall surfaces to match with existing complete all as specified and directed by Engr-in-Charge.

Supply and fixing of MCB DP 40 Amp, 240 Volt complete all as specified and directed by Engr-in-Charge.

Supply and fixing of MCB single pole 6 to 32 Amp, 240 volt complete all as specified and directed by Engr-in-Charge.

Material and labour for earthing complete with Galvanised iron earth plate electrode 60x60cmx6mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 Mtr below normal ground level, connected to galvanised iron earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of GI or steel all as shown in electrical plate No. 3 of SSR Part-I (2009) connected to earthing test point/transformer/panel all as specified or indicated and testing on completion as directed by the Engineer-in-Charge including necessary excavation & earth work in any type of soil, funnel, PCC chamber (1:2:4) type B-1, precast RCC pit cover with frame, charcol, salt including provision of earth lead protected by 15mm dia light grade GI pipe and 20mm dia medium grade GI Pipe for watering complete all as specified and directed. Note : (i) The unit rate quoted by the bidder shall include for GI water pipe, protection pipe, wire mesh, funnel, excavation, RCC pit cover, PCC, test point, GI earth strip/ lead wire from top of earth plate upto 7.5 mtr. (ii) PCC pit shall be provided at least 1.5m away from the earth pit and extra cost of additional length of water pipes and fixing junction, elbows etc. shall deemed to be included in the unit rate quoted by the bidder. (iii) Precast RCC 1:2:4, type B-1 pit cover shall be 80 mm thick. (iv) On testing after completion of earthing if the desired earth resistance is not obtained earthing will be re-done by the contractor at his own risk and cost to the entire satisfaction of Engr-in Charge.

Supply, laying, connecting and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core from existing panel or busbar and laid in trenches, fixed to wall/ pole or passing through pipes including all necessary clamps, nuts, bolts, washers complete all as specified and directed by Engineer-in-Charge.

Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth for foundation or for shafts, wells, cesspits, manholes, pier holes, cables etc n. exc 10 sqm on plan and n.exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed by Engineer-in-Charge.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed by Engineer-in-Charge.

Removing surplus soil to a distance not exc. 50m and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and directed by Engr-in-Charge.

Material and labour for sand cushioning to cable with a layer of sand 8 cm deep before laying the cable and 15 cms deep after laying the cable (punned down to 18 cms depth after laying and stretching of cable ) complete all as specified and and as directed by Engineer-in-Charge.

Supply and laying of well burnt old size sub class 'B' bricks laid in trenches over the cable (with length of bricks) perpendicular to the direction of cable, for cable protection complete all as specified and as directed by Engr in Charge.

Supply and laying of GI pipe 50 mm dia, 'light grade', galvanised with all fitting laid in trenches for cable protection complete all as specified and directed by Engineer-in-Charge.

BRIJ MOHAN LAL AND CO. (BID ID -3295526)