REBUILD-Idiyanchira Regulator-Flood- 2018-Repair works of shutters and Hoisting mechanism of Idiyanchira regulator (Mechanical Works)-General Mechanical

Amount

1 APPENDIX - 1 ( Dismantling Hoisting arrangement and Shutters)

OD14443/2022-2023:Dismantling the shutters along with hoisting frame and hoisting units as a whole and keeping it safely at a distance of not more than 100 meter for repair work of shutters including cost of labour, machinery, all leads and lifts, incidental and handling charges etc ss directed the departmental officers at site.

2 APPENDIX - 2 ( Cutting and removing the existing corroded embedded part and filling grout/concrete after erecting the new embedded part)

15.3:Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.

3 APPENDIX - 3 (Supply, fabrication and erection of shutter guide way as in a shape of legged channel at the first 3.5 mts is wth SS corner angle and the remaining 3.5 mts in MS material and erection of sill beam with SS padding )

OD14447/2022-2023:Supply of MS plates confirming to IS 2062GrB including cost of conveyance<br>charges

OD14445/2022-2023:Supply of MS round bar including cost of conveyance charges

OD14446/2022-2023:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including<br>cost of conveyance charges

OD14444/2022-2023:Fabrication, erection and commissioning of Structural steel Embedded parts in IS2062 Grade and accessories as per approved specifications, drawings and directions of deptl officer at site including cost of labour , machinery , incidental and handling charges etc complete but excluding cost of material already supplied Rate analysis of MS embedded parts 9.6Qtl CONSUMABLES

OD14629/2022-2023:Fabrication, Supply, erection and assembling in correct position and alignment by welding SS Embedded parts in 304L Grade for horizontal seal track as per approved specifications, drawings and directions of deptl officer at site including cost of all materials, labour, machinery for planing,welding, shearing, grinding etc,lead and lift, conveyance, incidental and handling etc complete Rate analysis SS Embedded parts 2.6Qtl

4 APPENDIX - 4 ( Alteration / repair work of the existing shutter to provide side seals on both directions and erection)

OD14448/2022-2023:Dismantling old rubber seal-chipping cutting and removing the bolt and nut dismantling taking out and stacking old rubber seal from the gate with out any damage. including cost of all labour tools and wccessories and lead lift and incidental and conveyance etc complete.

OD14450/2022-2023:Supply of MS plates confirming to IS 2062GrB including cost of conveyance<br>charges

OD14449/2022-2023:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including<br>cost of conveyance charges

85.106:Supply of MS flats including cost of conveyance charges

OD14452/2022-2023:Patch work of Structural steel shutter in IS2062 Grade as per approved specifications, drawings and directions of deptl officer at site including cost of labour , machinery , incidental and handling charges etc complete but excluding cost of material already supplied Rate analysis of MS embedded parts 9.6Qtl CONSUMABLES

85.114:Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

85.118:Supplying and fixing in correct position with specified initial interface L-type / bulb nose rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings

85.116:Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing

OD14451/2022-2023:Erection of the Canal Shutter (Up to 2 Tonne weight) /Hoisting Bridge/ Platform including hand rails, ladders etc for the same including. alignment correcting and setting complete including cost of labour, machinery, incidential and conveyance, lead and lift charges charges etc complete but excluding cost of material already supplied<br> Rate Analysis for 10qtl erection

5 APPENDIX - 5 (Supply, fabrication and painting of hoist supporting structure )

OD14454/2022-2023:Supply of MS plates confirming to IS 2062GrB including cost of conveyance<br>charges

OD14453/2022-2023:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including<br>cost of conveyance charges

OD14455/2022-2023:Fabrication of Hoisting supporting structure in IS2062 Grade as per approved specifications, drawings and directions of deptl officer at site including cost of labour , machinery , incidental and handling charges etc complete but excluding cost of material already supplied Rate analysis of MS embedded parts 9.6Qtl CONSUMABLES

OD14630/2022-2023:Erecting the hoisting supporting structure, cover for hoisting units and Enclosures as a whole including cost of labour, machinery, all leads and lifts, incidental and handling charges etc ss directed the departmental officers at site. Rate analysis for 10 Qtl

OD14456/2022-2023:Painting all the exposed areas of hoisting supporting structure, hand rails, ladder and covers of mechanism with 2 coats of Aluminium paint over 1 coat of red oxide primer after hand and power tool cleaning including cost of all materials, labour charges, all incidental charges, hire T&p etc. complete as per direction of departmental office at site

6 APPENDIX - 6 (Additional threading and bend correcting of existing screw rod

OD14457/2022-2023:Bend checking and straightening the existing screw shaft of nominal dia 63 mm as per the directions of deptl officer at site including cost of material, labour, machinery, incidental and handling charges etc complete ( Data for bend checking and straightening the existing screw shaft of nominal dia 63 x 4m long )

OD14458/2022-2023:Cost of additional threading on the existing screw shaft of nominal dia 63 mm x 7 pitch as per the directions of deptl officer at site including cost of material, labour, machinery, incidental and handling charges etc complete ( Data for threading of 1m length on the existing screw shaft of nominal dia 63 x pitch 7mm )

7 APPENDIX - 7 ( Supply and erection of power operated screw hoist)

OD14459/2022-2023:Supplying and stacking of 7.5 Tonne capacity power operated screw hoisting unit having 4 m lift at a hoisting speed of about 0.17m/min(+/-10%) driven by TEFC squirrel cage induction motor hoist duty type having capacity not less than 3HP and driven through self locking worm reducer, (Type 'V', size : 4 out put vertical shaft, input shaft extends on both sides, one end for hand operation ) and open gear reduction unit excluding the cost of screw shaft but including cost of electro magnetic thruster brake assembly, electrical accessories like DOL starters, limit switch, main switches and other safety equipments as per drawings specifications and statutory requirements etc complete Rate analysis for 7.5T capacity Power operated screw Hoisting Unit

OD14461/2022-2023:Erecting the power operated screw hoisting mechanism already supplied in correct position and alignment including cost of fastners, anchor bolts, labour , hire charge of tools and plants,and conducting trial run of entire mechanism etc. complete.

OD14462/2022-2023:Installing DOL starter, limit switch, main switch and other necessary electrical items already supplied as per the direction of the deptl. officer at site including cost of all labour, hire charges etc. complete

8 APPENDIX - 8 ( Supplying Diesel Generator Set )

OD14463/2022-2023:Supplying 25 kVA, 20 KW, 380-440V, 50Hz Diesel Generator set with trolley engine<br>with direct injection, water cooled, 3 Cylinder 4 stroke rated at 1500 rpm conforming to ISO 3046/BS 5514 and<br>along with insulated industrial 3-Pin socket weather proof & 16 sq mm 4 core PVC/XLPE insulated armoured<br>cable 200m with aluminium conductors for working voltages up to and including 1100 volts conforming IS<br>1584/part I/1988 for PVC IS 7098 part I for XLPE and as per the statutory requirements insisted by the<br>Electrical Inspectorate cost of all material, labour, transportation etc. complete

9 APPENDIX-9( Earthing work to electrical accessories

OD14627/2022-2023:Supplying and providing the following sizes of bolt and nut with washers on the existing MS box, earth, bus, earthing system etc.as required including drilling necessary holes as required-25x6mm brass bolt and nut

Electrical works

OD14633/2022-2023:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

OD14636/2022-2023:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required4.00 mm copper conductor ( 8 SWG)

OD14635/2022-2023:Supply and clamping the following size of strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages, colour washing etc. as required ( for horizontal run)25 x 6 mm copper strip

OD14634/2022-2023:Supply and laying of the following sizes of B class GI pipe laid 0.6 m below ground level including excavating trench of suitable size and refilling etc, as required.32 mm dia G.I pipe ( medium class)

Akhil Mandhana

SAMY CONSTRUCTION

Bidder Name

V M Asharaf

Akhil Mandhana

SAMY CONSTRUCTION