SPECIAL REPAIR TO BLDG NO P 83 OR MD ACCN AND ADDITION ALTERATION OF EXISTING COMPOUND WALL AT REAR SIDE OF BLDG NO P 83 AND P 84 AT MANNARPURAM TRICHY UNDER GE WELLINGTON

Amount

Demolition of Brick tiles or terracing tiles, single layer on roofs bedded in lime or cement mortar with tiles complete all as specified and directed.

Demolition of Concrete such (unreinforcerd) in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work compelte all as specified and as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and Brushing neat cement slurry with 3.0kg of cement per sq. metre compelte all as specified and as directed.

Providing cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate average thickness 25mm as in levelling / padding course on roof slab, projections on similar surfaces existing with slope making the surface even and smooth without using extra cement including using liquid water proofing compound all as specified and directed. Note: Supply of Integral water proofing compound will measured and paid seperately.

Supply only liquid water proofing compound all as specified and directed.

Hydraulically pressed burnt clay tile plain of size 200x200x19/20mm machine made laid over & including cement mortar screed 15mm thick in cement mortar screed 15mm thick in cement mortar 1:6 mixed with water proofing compound and jointed pointed in cement mortar 1:3 mixed with 5% crude oil by weight of cement all as specified and directed. Note: WPC shall be measured and paid seperately.

Extra over rendering or plastering for work in isolated widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds and similar work exc 15cm but n.exc 30cm in width or girth, including cutting to edges, mitred and stopped ends etc., complete all as specified and directed.

Demolition of cement concrete ( unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level ) etc complete all as specified and directed

Dismantling of floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed.

40mm thick Plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in floor, complete all as specified and directed.

Vitrified Ceramic tiles light shade 10mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

All as per item No 11 hereinbefore but on vertical surfaces including 10mm thick cement mortar1:3 as in baking coat of dado/ skirting all as specified and directed.

Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match the surface over and including 15mm thick screed bed or bedding layer of mortar in cement mortar 1:6 complete all as specified and as directed.

Coloured glazed ceramic tiles 300 x 200 x 7mm thick as in skirting / dado set and jointed in neat cement slurry and pointed in coloured cement to match colour of the tile including backing coat/ screed 10mm thick in cement mortar 1:4 on fair faces of brick / stone wall surfaces complete all as specified and directed.

Taking down and resecuring or easing of shutters of any description exceeding 2 sqm each each and refixing in same opening complete all as specified and directed.

Taking down chowkat or frame with shutter (without taking of shutters from the frames) area not exceeding 1.5 Sq mtr each all as specified and directed.

Taking down chowkat or frame with shutter (without taking off shutters from the frames) area exceeding 1.5 Sq mtr but not exceeding 4 Sq mtr each all as specified and directed.

Taking down Shutter of any description exceeding. 1 sqm and not exceeding 2 sqm and refixing in the same opening each all as specified and directed.

Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/ pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and all as specified and directed.

Factory made UPVC white colour sliding window three track, area not exceeding 2.00 Sqm each made of extruded profiles with wall thickness of 2.3mm (± 0.2mm) window profile with hollow section with multi chamber frame (88mm x 85mm) sliding sash (42mm x 67mm) sliding mesh sash (42mm x 57mm) sliding mesh sash (42mm x 57mm) sliding interlock (one vertical length in each shutters) (45.5mm x 28mm) Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware EPDM gasket, 1.2 (± 0.2mm) thick galvanised steel frame (30mm x 18mm) 2 Nos sliding sash (30mm x 18mm) sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, hardware (Touch Lock of zinc alloyed (white powder coated) steel roller system stainless stell wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories all as specified and directed. Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories net opening will be measured for payment purpose.

Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Figured glass 4mm thick pin head type and glazing with oil putty/wooden beads as directed in squares not exceeding 0.5Sq.m in each pane all as specified and directed.

Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed.

Ground or obscured or frosted on one side sheet glass 4 mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.50 sqm in each pane all as specified and directed

2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue, pinned at joints all as specified and as directed.

35 mm thick flush shutter,solid core construction, with block Board Core and plywood face panels, commercial type on both sides complete all as specified and as directed.

2nd Class Hard wood 35mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneer particle board with commercial veneering on both faces. The size of the rail and as per IS 1003 (Part -I) Kiln seasoned and chemically pressure treated all as specified and directed.

2nd class Hard wood 35 mm thick Glazed and skeleton shutters, open rebated prepared to receive glass/gauze etc. edges of framing, divided in to squres with plain chamfered or rounded, fitted with cut mitered beads for securing glass/ gauze all as specified and directed. Note: Glazing and gauze will be measured separately

Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples to steel / wooden joinery and fixed in repairs all as specified and directed.

MS work in Bands, straps, supports or stays for rainwater, ventilating pipes including bolts, if requried hooks (stay), heavy for large gates, hook and pintle hinges, large hasp and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe 410-0 or Fe 310-0 all as specified and as directed.

Cutting holes exc half brick but not exc one brikck in stone walls built in CM or in cement lime mortar for inserting holdfasts & Making good dismantled portion in CM (1:3) or PCC (1:2:4) type B1 complete all as specified and as directed.

S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain color PVC sheet reinforced with MS Square tube, fixed in opening as per specification and drawing complete all as specified and directed.

Factory made solid panel PVC door shutter 30mm (Stile) consisting of frame made out of M.S tubes for top and bottom rails M.S frame made up of tubes shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheets to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame all as mentioned in SSR drawing all as specified and directed.

Butt hinges, 125 mm size medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

Aluminum handles, fabricated type ,anodised extruded section 150 mm long all as specified and directed.

Aluminium anodized barrel tower bolt of extruded section 150 mm length all as specified and directed.

300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel pin fixed to door of 140mm overall length all as specified and directed.

Preparation of new wood surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed.

Fancy type Steel PVC Coated, drapery rod of size 20-25mm dia, including fixing of Steel powder coated fancy brackets and end stops 2 Nos in each opening etc complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc, complete all as specified and as directed.

Rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement all as specified and directed

Preparation of new plastered wall surfaces and applying two coats of oil bound distemper over a priming coat using chalk whiting, complete all as specified and directed.

Rendering 5mm thick in cement mortar 1:3 on concrete surfaces of ceiling, finished even and smooth without using extra cement complete all as specified and directed.

Applying three coats of whitewash in ceiling on newly plastered surfaces all as specified and as directed.

Preparation of old decorated surfaces of ceiling (plastered or unplastered) including cornics and pillasters and applying one coat of white washing complet all as specified and directed.

Demolition of Brickwork, stone / boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Brick work with sub class B clay bricks straight or curved on plan exceeding 6M mean radius built in cement mortar 1:4 all as specified and directed.

Complete removal of existing treatment on plastered surfaces and applying two coats of oil bound distemper washable over a coat of primer using chalk whiting on wall surface complete all as specified and directed.

Complete removal of existing treatment on plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant priming paint on old plastard surface complete all as specified and directed.

Rendering 5mm thick in CM 1:4 with WPC over a coat of 10mm thick rendering in CM 1:6 on fair faces of stone masnory surfaces or surfaces other than fair face of brick work or on one side of lathing of walls, finished even and smooth (without using extra cement) complete all as specified.

Applying two coats of cement based paint, over a coat of alkali resistant primer including preparation of newly plastered surfaces complete all as specified and as directed.

Preparation of old painted wooden surfaces and wood based materials of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per sqm including cleaning the surface and APP based polymeric membrane weighing minimum 3Kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (weight not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified and as directed.

Taking up or down steel tubing 15mm bore pipes and connections, complete all as specified and directed.

3 Layer PP-R (Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion elded having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc of size 20mm dia all as specified and directed.

Supply and fix in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

PVC low level flushing cistern 10 litres capacity, valveless, syphonic action type, white, with inlet ball valve, float and handle including connecting to bracket fixed in repairs complete all as specified and directed.

Chromium plated shower rose with or without swivel joint,100 to 125mm size, including fixing to steel pipe or union, fixed in repairs complete all as specified and directed.

Shower arm 15mm size, 195mm long with bend of 45degree with flange of PTMT any colour. (Minimum weight 40gms) etc complete and fixed in repiars all as specified and as directed.

Vitreous china wash basin, white, flat back, size 550 x 400mm including brackets and waste coupling including fixed in repairs complete all as specified and directed.

Vitreous China Wash down water closet pan (Pedestal pattern), white (excluding flushing cistern and flush pipe) fixed in repairs complete all as specified and directed.

Stainless steel sinks with drainage board 1mm thick with plugs, washers and waste; incl bedding in cement mortar on to dwarf walls, or including fixing cantilever brackets and connecting union to waste pipe, overall size 915mmx460mm, bowl size 410 x 330 x 160mm, fixed to repairs complete all as specified and directed.

Granite (of any type) work 18-20mm thick machine cut including nosing, removing edges etc. (table rubbed and polished), as in cooking platform and the like including 15mm thick screed in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

15mm dia bore bib taps of cast copper alloy fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed in repairs all as specified and directed.

Pillar taps, fancy type, 15mm dia cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed in repairs all as specified and directed.

Angle valves, 15mm dia, fancy type chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repairs all as specified and directed.

Stop valves, 15mm dia for shower rose, fancy type, with long shank and cup concealed type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair all as specified and directed

Supply and fix in repairs 32/40mm dia expandable type PTMT waste pipe for Wash hand basin/ kitchen sink complete all as specified and diercted.

PVC connections 15mm size with PTMT nuts of length 450mm fixed in repairs complete all as specified and directed.

Chromium plated cast copper alloy fancy type, two in one combination of bib tap and angle valve 15mm dia fixed in repairs all as specified and directed.

75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

Soap dish, vitreous China white, approximate size 160x 160x90mmany type fixed to plugs with chromium plated brass screws including fixed in repairs all as specified and directed.

Stainless steel transparent corner glass shelf of size 2.7cm x 2.7cm complete all as specified and directed.

Cabinet with mirror plastic wall shelf complete all as specified and directed.

20mm dia Gunmetal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed in repairs all as specified and directed.

Dismantling and removing water tanks of capacity exceeding 250 ltrs and not exceeding 500 ltrs all as specified and directed.

Rotational moulded polyethylene water storage tanks, ISI marked three layer (cylindrical vertical with closed top) hoisted and fixed in position, 750 ltrs capacity all as specified and directed.

Ball valves 15 mm dia high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed in repairs (Minimum weight 15mm-142gms) complete all as specified and directed.

20mm dia nipple of PTMT, suitable for HDPE water tank min weight 45 gms complete all as specified and directed.

Taking down existing rain water pipe and sewage pipe of any description and in any position of any size all as specified and directed.

PVC (SWR) 75mm dia pipe single socketed in any length, with rubber ring joint fixed to walls with clamps complete all as specified and directed.

PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints laid in trenches or in floors/fixed to wall complete all as specified and as directed.

M&L for PVC (SWR) Tee any radius, 110mm bore fitted with oval access door complete all as specified and directed.

PVC (SWR) branch piece single, (single Y) equal or unequal of 110mm bore of pipe fitted with oval access door complete all as specified and directed

PVC (SWR) bends any radius, 75mm bore with oval access door complete all as specified and directed.

PVC (SWR) branch piece single, (single Y) equal or unequal of 75mm bore of pipe fitted with oval access door complete all as specified and directed

PVC (SWR) vent cowl 110mm dia bore of pipe complete all as specified and directed.

PVC (SWR) vent cowl 75mm dia bore of pipe complete all as specified and directed.

PVC (SWR) 110mm bore 'P' Trap all as specified and directed.

PVC (SWR) 110mm bore 'S' Trap all as specified and directed.

PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement all as specified and as directed.

Demolition and breaking up drain pipe (salt glazed drain pipes, AC or RCC) set in cement mortar internal dia of pipes 150mm all as specified and directed.

160mm (outer dia) PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors or in walls all as specified and directed.

Concrete bed to 150mm/160mm bore drain pipes in PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) including packing under and haunching against the side of pipes after they are laid and tested all as specified and directed.

Mild steel TMT bars 6 to 8mm dia and over cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.90mm dia or securing with clips all as specified and directed.

Precast reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) frame for fixing louvres and similar work including necessary form work and set in cement mortar 1:4 complete all as specified and directed. Note :- Reinforcement shall be measured and paid separately.

75mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection / path, laid and finished in bays not exceeding 3m c/c and filling the joints with mastic bitumen complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for all as specified and as directed.

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 Sq m on plan and not exceeding 1.5m depth and getting out in hard/ dense soil complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick each layer in hard/dense soil complete all as specified and directed

Removing of excavated soils not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Plain cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concreting, complete all as specified and directed.

Use and waste of formwork to sides of concrete foundations, footings, base of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work; vertical or to batter flat surface rough finished complete all as specified and directed.

Steel reinforcement for concrete with Mild steel TMT bars 10mm dia and over, cut to length, bent to shape as required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed.

Steel reinforcement for concrete with Mild steel TMT bars 5mm dia and over cut and upto and including 10mm dia stirrups, spacers and binders, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.90mm dia or securing with clips all as specified and directed.

Reinforced cement concrete M-25 design mix using 20 mm graded stone aggregate as in foundations including rafts, footings, foundation beams, plinth beams, bases for columns etc basement slabs, under-reamed piles and mass concrete all as specified and directed.

Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions with rough finished surface of concrete square, rectangular or polygonal complete all as specified and directed.

Reinforced cement concrete M-25 design mix using 20 mm graded stone aggregate in columns, pillars, piers, posts and struts etc all as specified and directed.

Use and waste of steel Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. Fair finished surfaces of concrete flat complete all as speicified and directed.

Reinforced cement concrete M-25 design mix using 20 mm graded stone aggregate for Beams, cantilevers, bressumers, lintels over 1.5m span, complete all as specified and directed.

Pre-cast cement concrete block masnory with solid block type C1, 1:3:6 using 20mm graded stone aggregate exceeding 10cm in width and setting in cement mortar 1:6 complete all as specified and directed

Rendering 15mm thick on fair faces of brick / concrete / RR masonry surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and directed.

PCC 1:3:6, type C-1 using 20 mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing coruses, parapets and railing upto 60 cm in height, coping, kneelers, apex stones,, bed plates kerbs, water troughts and the like including weathering slightly rounded chamfered angles and throating complete all as specified and directed.

Broken glass coping on top of walls in cement mortar 1:3 complete all as specified and directed.

Framed work as in doors or gates of angle or other section with gussest plates, rails, braces, etc, complete drilled for fixing of steel sheeting or other covering doors etc, to be prepared for hanging and sliding with and including either hooks and hinges or steel hnging door fittings and slidding bolt/ tower bolt (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete conferming to gde Fe 410 (Gde E-250) quality-A fixed in position all as specified and directed.

Preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

Taking down old unserviceable copper/aluminium point wiring (light, fan, socket or power) complete of any type (casing & capping, surface or concealed conduite, wooden batten etc), including fixture and fittings such as tublight fitting, switches, ceiling roses, pendants, fan, regulators, sockets, wooden gutties/ rawal plug, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good to the disturbed surfaces of walls, floors, etc. complete as specified or directed

Taking down main switches, distribution board, steel enclosure with MCB's any way and rating including wooden board or from steel board and making good distrubed surface all as specified and directed.

Taking down carefully service cable of any nos of wire and size with earth wire on wooden batten/ surface conduit casing / caping complete with its all accessories including making good disturbed surface to match the existing surface all as specified and directed.

Point wiring complete with with and including 1.5Sqmm (nominal area) single core multi stranded FRLS copper conductor PVC insulated unsheathed cable of 1100V grade conforming to IS-694 with valid CML NO. drawn through and including surface in PVC casing & caping with all accessories such as bends, tees, junction boxes etc, anoised steel terminal boxes for mounting fittings like switches, sockets, sockets and fan regulators etc with 3 mm thick laminated sheet covers fixed with brass screws and cup washer including one run of 1.5 Sqmm PVC insulated and unsheathed multi strand FRLS copper conductor as green colour earth wire and connected to common earth dolly for one light point controlled by one No one way switch 5/6 Amps complete all as specified and directed. NOTE: Chases cutting where reqd will be measured and paid separtely.

All as per item No 122 hereinbefore but one ceiling fan point controlled by one switch with cables 1.5sqmm size complete all as specified and directed.

All as per item No 122 hereinbefore but one exhaust fan point controlled by one switch with cables 1.5sqmm size complete all as specified and directed.

All as per Item No.122 hereinbefore but One light point controlled by two way switches, with cable 1.5 Sqmm size all as specified and directed.

All as per item No 122 hereinbefore but one 3 pin 5 Amps socket outlet on the same board with other switches with cable 1.5 Sqmm size switch complete all as specified and directed.

All as per item No 122 hereinbefore but one 3 pin 5 Amps socket outlet on the independent boards with cable 1.5 Sqmm size switch complete all as specified and directed.

All as per item No 122 hereinbefore but one 3 pin 5 Amps socket outlet on the independent boards but below the switch board of light points in the same verticla plane with cable 1.5 Sqmm size switch complete all as specified and directed.

All as per Item No.122 hereinbefore but point wiring complete One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sq.mm size all as specified and directed.

All as per Item No 122 hereinbefore but point wiring complete with 2.5 sqmm FRLS cable for 3/6 pin 15 A socket outlet on independent board including 2.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor all as specified and directed.

Wiring for circuit / sub main wiring with two runs of single core PVC insulated unsheathed cable 6.0 sqmm (nominal area) 1100 volts grade multistranded FRLS copper conductor with one run of 6.0 sqmm PVC insulated unsheathed multistranded single core copper conductor 1100 volts grade conforming to IS 694 marked with valid CML No.and connecting to common earth drawn through in and including surface / concealed non metalic rigid PVC conduit with all accessories such as bends, tees, junction boxes etc. all as specified or directed by Engr-in-Charge. Note: (a). Two runs of 6.0 sqmm as phase and neutral wire and one run of 6.0sqmm wire of green colour as earth cable shall be measured and paid as one length. (b). Proper colour coding of wires i.e. R/Y/B colour wire for Phase, Black colour wire for neutral and green colour wire for earth wire be adhered strictley executing at site.

Switch piano, flush type single pole, one way 6 Amp, 240V, 50Hz AC supply, ISI marked all as specified and directed.

Switch socket combination 2 in 1 , 6 Amps multipurpose flush type with PVC surface box all as specified and directed.

Switch socket combination 2 in 1, 3 pin, 6 & 16 Amps flush type universal suitable for 230V, 50Hz AC supply ISI marked all as specified and directed.

Fan regulator stepped electronic fan regulator flush type (switch type) suitable for ceiling fan 240V AC 50 Hz ISI marked in replacement and keeping old fan regulatore aside in safe custody all as specified and directed.

Replacement of bell AC multi music type 230 volt all as specified and directed.

Ceiling rose, 3 terminals PVC / polycarbonate, isolated body all as specified and directed.

LED light fitting 1x20 watt, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

LED Light fitting mirror type with high out put diffuser 2 feet, 1 x 10watt 220V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Decorative wall light, stainless steel, rust free fixture with white glass diffuser suitable for 9 W LED filament lamp E27 base complete all as specified and directed. Make : Havells Cat Part No LHFOAID1TZ1I040 or other equivalent in Bajaj/Wipro/CG.

S&F LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Taking down unserviceable DBs with MCBs and Supply and fix MCB DB SPN 8 way 240 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works all as specified and directed.

Taking down unserviceable DBs with MCBs and Supply and fix MCB DB TPN 4 way 415 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works all as specified and directed.

Supply and fixing amp rating 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 Amps, in the MCB DB Complete with connection testing and commissioning all as specified and directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of single poles and neutral (SPN) current carrying capacity 40 to 63 AMP in the MCB DB complete with connection testing and commissioning.

Supply and fixing 415V 10KA 'B' curve miniature circuit breaker (MCB) of Tripple poles and Neutral (TPN) current carrying capacity 40Amps to 100Amps in the DB complete with connection testing and commissioning.

Material and Labour for disconnecting electrical wire from ceiling rose, taking down ceiling fan of any type/size and make, revoving substances from bearing, bush by using kerosene oil, carrying out fresh lubrication using grease and to make the ceiling fan noise free for smooth functioning including replacement of worn-out/ unserviceable spares as required, replacement of PVC insulated unsheathed stranded twisted copper conductor cable of size 1.5 Sqmm upto 1.0 Mtr long assembling the repaired ceiling Fan, testing and hanging at position, connection with point wiring & Testing complete all as directed. Note: Replacement of worn out defective/unserviceable spare parts, flexible wire etc/ rewinding of ceiling fan and painting shall be measured and paid separately under relevant item of the schedule)

All as per item No. 147 hereinbefore but for exhaust fan 300 mm sweep all as specified and directed.

Supply only rubber real with nuts, bolts and washers and split pin complete for hanging of ceiling fan of any size all as specified and directed.

Capacitor 2.5mfd oil based suitable for 440V, 50Hz AC supply all as as specified and directed. Make: Universal/ Usha/ Havells/ Tibcon/ Asian etc.

Supply and fixing ball bearing of any size and type suitable for any type / make / size of ceiling fan all as specified and directed. Make: TATA/ NBC/ SKF.

Earthing complete with galvanized steel earth plate electrode 60 cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanized earth wire of size 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical platee No 3 connected to earth testing point including necessary excavation, earth work, PCC pit ,RCC cover 1:2:4 B1 with 8 mm dia MS bars at 100 c/c, funnel, watering pipe etc. all as specified and directed including testing on completion.

Cutting chases in brick wall, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300 mm complete all as specified and directed.

Bell push, flush type, single pole 5/6 Amps all as specified and directed.

Schedule of Credit (Minus) Rs. 63010.00 NOTE: Bidder shall insert credit amount of Rs. 63010.00 as rate in Green field under Col-5.

SKV Engineering (BID ID -3511407)

M/s K Moorthi (BID ID -3511325)

CHANDER SEKER ENTERPRISE (BID ID -3514927)

M Govindarajan (BID ID -3512590)