WBPWD/EE/BED/e-NIQ-35/2024-25

Amount

10 Passenger MRL Lift SITC of Automatic MRL Lift (as per manufacturer design & as per detailed specification below Conforming to IS) and putting it into operation after final testing in the existing lift shaft, complete with all accessories and repairing the damaged wall/floor etc. if any as required. Make: OTIS/KONE/SCHINDLER Type: Passenger Lift without machine room. Load: 10 - Passenger/680 Kg. Control: Microprocessor based with AC variable voltage & variable frequency (VVVF) Machine:- Energy efficient machine, Gearless without Machine Room. Speed:- 01 M/s. Floor Served:- G+5. Landing:- 06 Lands; All on same sides. Total Rise: 15.5 Mtr approx. (Bidder should visit the site) as per lift well. Operation: Microprocessor based simplex full collective with or without attendant. Signals: Digital car position indicator, car travels direction indicator in car & at all landing with call registration indicator. COP & LOP must have stainless steel face plate silver brushed with surface mounted button with braille. Button: All buttons on car & landing shall be luminous & encoded with braille on/off switch for Lift, fan, light, toggle switch or key switch for automatic/attendant mode of operation. Display type: Monochrome/Colour LCD/Segmented LCD/Scroll, Operation Push Button for lift maintenance & service should be on top of the car. Levelling accuracy ± 5 mm (Micro levelling arrangement)

CAR Car inside: 1200 mm (W) x 1400 mm (D) x 2200 mm (H) or as per manufacturer’s standard conforming to IS. Car Entrance: Clear Opening (minimum) 800 mm (W) x 2000 mm (H) protected with car door. Car Enclosure: Stainless Steel Sheet (20 SWG) with Hairline finish with hand rail. Car Ceiling & Lighting: Stainless Steel with hairline finish with LED lighting and Fan. Car Ventilation: Axial fan/Cross flow fan with anodised aluminium/SS grill. Car Flooring: Decorative granite Flooring (As per direction of EIC and according to departmental order). Car Door: Stainless Steel Centre opening (COPD)/ Telescopic opening (TSPD) automatic door provided with V3F controlled door drive system. Landing Door: Stainless Steel Centre opening (COPD)/ Telescopic opening (TSPD) automatic door provided with V3F controlled door drive system with fire rating of 120 minute. Door Opening: Automatic Power operated door with full length photocell assembly curtain sensor.

PROTECTTVE DEVICES & OTHER ACESSORIES ARD: Automatic Rescue device complete with dry maintenance free batteries as required for automatic evacuation to the nearest floor in case of power failure/single phasing/others. Overload Protection: Fully loaded with overload protection. On overloading condition the lift car will not start with door remaining open and give audio & display indication. Emergency lighting in car: Battery operated emergency lighting in the lift car. Intercom system: Battery operated intercom system in Lift Car, Machine Room & Control Room. Emergency Alarm: Battery operated alarm bell system in lift car & control room. Fireman switch: Fireman switch placed at ground floor. Voice Synthesizer: Voice announcement system (Voice Synthesizer) in the car to announce the position of the elevator in the hoist way as the car passes or stops at a floor served by the lift. Car Parking at top floor at idle condition. Main Wire Rope/Belt: As per manufacture’s standard conforming to IS.

DIMENSION OF SHAFT & POWER SUPPLY Available Shaft Dimension: 1850 mm (Width) X 2150 mm (Depth) (Bidder should visit the site) Pit Depth: 1600 mm (Bidder should visit the site) Overhead: 4600 mm (Bidder should visit the site) Electric power supply: AC 415 Volt 3 phase, 50 Hz, terminated in machine room as per IS. Note: 1. Rate considering Minor civil works, wall / floor cutting, for making holes, chiselling etc. and mending good the damages to the original finish. Note: 2. Necessary MS member e.g., angle iron, MS channel, brackets etc. as required to be provided by the manufacturer.

Dismantling ofo existing passenger lift in consultation with EIC.

Buyback of existing Lift with all accessories.

Rates are inclusive of all taxes & duties including GST.

Otis Elevator Company(India)Limited (BID ID -5688455)